After upgrade , autoconfig failed in adsvcm.cmd

Hi ,
After i've finished the upgrade and started all the services , the concurrent manager service failed to start
i've run autoconfig on db tier , it went successfully but on apps tier failed during execution adsvcm.cmd
here is the error :
AutoConfig Services Phase
Running Service Process 4 of 9 for AD_TOP
Executing script in InstantiateFile:
D:\oracle\TEST\inst\apps\TEST_oratest2009\admin\install\adsvcm.cmd
script returned:
ECHO is off.
ECHO is off.
Sun 01/05/2014 11:05 AM
Enter the APPS Username/Password: adsvcm.cmd exiting with status 128
ERRORCODE = 128 ERRORCODE_END
.end std out.
.end err out.
and when i tried to run the script adsvcm.cmd manually
it resulted the error CCMSVC.EXE (this application failed to start because mfc80.dll was not found )
Actually im stuck and i dont know what should i do !!
OS : windows server 2003R2 SP1 (both apps tier and db tier )
DB : 10.2.0.4
Apps : 11.5.10.2 CU2 upgraded to 12.1.1

sorry for late on reply as i was on vacation .
i've done
$ adrelink.sh force=y link_debug=y "fnd FNDLIBR"
$ adrelink.sh force=y link_debug=y "fnd FNDCRM"
$ adrelink.sh force=y link_debug=y "fnd FNDSM"
all completed successfully without any resulted errors , but issue still the same .
and here is error log from windows event log
Event Type:    Error
Event Source:    Application Error
Event Category:    (100)
Event ID:    1000
Date:        1/8/2014
Time:        9:08:05 AM
User:        N/A
Computer:    ORATEST2009
Description:
Faulting application INVLIBR.exe, version 0.0.0.0, faulting module unknown, version 0.0.0.0, fault address 0x0103631c.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 49 4e 56   ure  INV
0018: 4c 49 42 52 2e 65 78 65   LIBR.exe
0020: 20 30 2e 30 2e 30 2e 30    0.0.0.0
0028: 20 69 6e 20 75 6e 6b 6e    in unkn
0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
0038: 30 2e 30 20 61 74 20 6f   0.0 at o
0040: 66 66 73 65 74 20 30 31   ffset 01
0048: 30 33 36 33 31 63         03631c 
regards
Ahmed

Similar Messages

  • After upgrade System fail to boot

    Hi,
    few days ago I did the system upgrade and after reboot i get several errors and the system doesn't boot, the first one in the list is:
    FATAL could not load "/lib/modules/3.0-ARCH/modules.dep" no such file or directory
    I think the problem is that in my /lib/modules/ dir there is no /3.0-ARCH dir but there is the 3.1.4.1-ARCH and the 3.1 extramodules.
    why that? Is this problem coming from the upgrade?
    also the network is not recognized
    and the RAID disks are not mounted
    the only thing I found on internet is this article:
    https://bbs.archlinux.org/viewtopic.php?id=129970
    but I cannot downgrade because the pkg dir is empty and I cannot connect to internet for get it
    can you please help me?
    thanks

    I found something maybe useful...
    in the dmesg I found that the boot disk is loaded as sdc but, I'm sure it was sda before the upgrade.
    in the menu.lst there is
    - title Arch lunix [/boot/vmlinuz.linux]
    - root (hd0,0)
    - kernel /vmlinuz-linuz root=/dev/sda3 ro
    - initrd /initramfs-linux.img
    do you think that changing something in this I can have back my boot partition?

  • [Solved] Openbox fails to exit back to prompt after upgrade

    I don't use any login manager so I simply boot to a console and start openbox manually via xinit.
    However, after upgrade OpenBox fails to exit back to the login console. Anyone experiencing the same? Any idea on how to fix it?
    Several programs got updated recently, xinit, openbox,... so I don't know what exactly is causing the problem...
    I also have xmonad but that still works fine. So if I have to guess it's openbox's (3.5.0) issue.
    Last edited by pingpong (2012-11-01 03:33:29)

    Hm, here's a backtrace after running openbox --exit:
    #0 0xb76e0424 in __kernel_vsyscall ()
    #1 0xb70ba422 in __lll_lock_wait () from /usr/lib/libpthread.so.0
    #2 0xb70b5e82 in _L_lock_675 () from /usr/lib/libpthread.so.0
    #3 0xb70b5e17 in pthread_mutex_lock () from /usr/lib/libpthread.so.0
    #4 0xb7231cf4 in pthread_mutex_lock () from /usr/lib/libc.so.6
    #5 0xb7634c10 in g_mutex_lock () from /usr/lib/libglib-2.0.so.0
    #6 0xb6fe8348 in ?? () from /usr/lib/libpangoxft-1.0.so.0
    #7 0xb6fe87a7 in pango_xft_shutdown_display () from /usr/lib/libpangoxft-1.0.so.0
    #8 0xb6fe8887 in ?? () from /usr/lib/libpangoxft-1.0.so.0
    #9 0xb748d0f3 in XCloseDisplay () from /usr/lib/libX11.so.6
    #10 0xb72e5d86 in obt_display_close () from /usr/lib/libobt.so.0
    #11 0x0805487e in main ()
    So openbox is calling XCloseDisplay() but it never returns because Pango is stuck trying to clean up?!
    Edit: Others noticed it too: https://bugzilla.redhat.com/show_bug.cgi?id=802086#c6
    Edit 2: Are there any programmers here? Does this look OK to you? close_display_cb() gets called when the X connection is closed, and it calls pango_xft_shutdown_display() while holding a lock on fontmaps. Then pango_xft_shutdown_display() immediately calls pango_xft_find_font_map(), which also tries to acquire a lock on the already locked fontmaps. Bang!
    Last edited by ma (2012-11-02 16:12:05)

  • Autoconfig issue after upgrading 12.1.1 to 12.1.3

    Hi all,
    I am getting below mention autoconfig issue after upgrading 12.1.1 to 12.1.3.
    jtfictx.sh started at Mon Mar 28 08:28:50 EDT 2011
    SQL*Plus: Release 10.1.0.5.0 - Production on Mon Mar 28 08:28:50 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Enter value for 1: Enter value for 2: Enter value for 3: Connected.
    DECLARE
    ERROR at line 1:
    ORA-29858: error occurred in the execution of ODCIINDEXALTER routine
    ORA-20000: Oracle Text error:
    DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operation
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 665
    ORA-06512: at "SYS.DBMS_SQL", line 1199
    ORA-06512: at line 96
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Product
    ion
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    jtfictx.sh exiting with status 1
    ERRORCODE = 1 ERRORCODE_END
    .end std out.
    .end err out.
    i got below mention some solution from metalink, but that does not working.
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=743720.1
    according to note we need to create index but its giveing below metion error.
    SQL> @jtfiaibu.sql jtf jtf apps
    Connected.
    DECLARE
    ERROR at line 1:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-20000: Oracle Text error:
    DRG-10758: index owner does not have the privilege to use file or URL datastore
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
    ORA-06512: at "SYS.DBMS_SQL", line 1199
    ORA-06512: at line 37
    Thanks in advance,
    Sandeep.

    Hi,
    DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operationPlease make sure you have no invalid objects. And also please see of these helps. I know these are for older version, but please check
    Script jtfictx.sh Failed While Attempting To Run The Autoconfig On APPS Tier [ID 1271186.1]
    Autoconfig Returns ORA-29868 from jtfictx.sh [ID 386740.1]
    By the way did u iinstall companion/examples CD after installing OracleSoftware
    Thanks,
    Taher

  • Unit test fails after upgrading to Kodo 4.0.0 from 4.0.0-EA4

    I have a group of 6 unit tests failing after upgrading to the new Kodo
    4.0.0 (with BEA) from Kodo-4.0.0-EA4 (with Solarmetric). I'm getting
    exceptions like the one at the bottom of this email. It seems to be an
    interaction with the PostgreSQL driver, though I can't be sure. I
    haven't changed my JDO configuration or the related classes in months
    since I've been focusing on using the objects that have already been
    defined. The .jdo, .jdoquery, and .java code are below the exception,
    just in case there's something wrong in there. Does anyone have advice
    as to how I might debug this?
    Thanks,
    Mark
    Testsuite: edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest
    Tests run: 15, Failures: 0, Errors: 6, Time elapsed: 23.308 sec
    Testcase:
    testGetAllUsersWithFirstName(edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest):
    Caused an ERROR
    The column index is out of range: 2, number of columns: 1.
    <2|false|4.0.0> kodo.jdo.DataStoreException: The column index is out of
    range: 2, number of columns: 1.
    at
    kodo.jdbc.sql.DBDictionary.newStoreException(DBDictionary.java:4092)
    at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:82)
    at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:66)
    at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:46)
    at
    kodo.jdbc.kernel.SelectResultObjectProvider.handleCheckedException(SelectResultObjectProvider.java:176)
    at
    kodo.kernel.QueryImpl$PackingResultObjectProvider.handleCheckedException(QueryImpl.java:2460)
    at
    com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:32)
    at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
    at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
    at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
    at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
    at
    edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
    at
    edu.ucsc.whisper.core.manager.DefaultUserManager.getAllUsersWithFirstName(DefaultUserManager.java:252)
    NestedThrowablesStackTrace:
    org.postgresql.util.PSQLException: The column index is out of range: 2,
    number of columns: 1.
    at
    org.postgresql.core.v3.SimpleParameterList.bind(SimpleParameterList.java:57)
    at
    org.postgresql.core.v3.SimpleParameterList.setLiteralParameter(SimpleParameterList.java:101)
    at
    org.postgresql.jdbc2.AbstractJdbc2Statement.bindLiteral(AbstractJdbc2Statement.java:2085)
    at
    org.postgresql.jdbc2.AbstractJdbc2Statement.setInt(AbstractJdbc2Statement.java:1133)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.PoolConnection$PoolPreparedStatement.setInt(PoolConnection.java:440)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.LoggingConnectionDecorator$LoggingConnection$LoggingPreparedStatement.setInt(LoggingConnectionDecorator.java:1
    257)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at kodo.jdbc.sql.DBDictionary.setInt(DBDictionary.java:980)
    at kodo.jdbc.sql.DBDictionary.setUnknown(DBDictionary.java:1299)
    at kodo.jdbc.sql.SQLBuffer.setParameters(SQLBuffer.java:638)
    at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:539)
    at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:512)
    at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:332)
    at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:301)
    at kodo.jdbc.sql.Union$UnionSelect.execute(Union.java:642)
    at kodo.jdbc.sql.Union.execute(Union.java:326)
    at kodo.jdbc.sql.Union.execute(Union.java:313)
    at
    kodo.jdbc.kernel.SelectResultObjectProvider.open(SelectResultObjectProvider.java:98)
    at
    kodo.kernel.QueryImpl$PackingResultObjectProvider.open(QueryImpl.java:2405)
    at
    com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:22)
    at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
    at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
    at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
    at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
    at
    edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
    --- DefaultUser.java -------------------------------------------------
    public class DefaultUser
    implements User
    /** The account username. */
    private String username;
    /** The account password. */
    private String password;
    /** A flag indicating whether or not the account is enabled. */
    private boolean enabled;
    /** The authorities granted to this account. */
    private Set<Authority> authorities;
    /** Information about the user, including their name and text that
    describes them. */
    private UserInfo userInfo;
    /** The set of organizations where this user works. */
    private Set<Organization> organizations;
    --- DefaultUser.jdo --------------------------------------------------
    <?xml version="1.0"?>
    <!DOCTYPE jdo PUBLIC
    "-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
    "http://java.sun.com/dtd/jdo_2_0.dtd">
    <jdo>
    <package name="edu.ucsc.whisper.core">
    <sequence name="user_id_seq"
    factory-class="native(Sequence=user_id_seq)"/>
    <class name="DefaultUser" detachable="true"
    table="whisper_user" identity-type="datastore">
    <datastore-identity sequence="user_id_seq" column="userId"/>
    <field name="username">
    <column name="username" length="80" jdbc-type="VARCHAR" />
    </field>
    <field name="password">
    <column name="password" length="40" jdbc-type="CHAR" />
    </field>
    <field name="enabled">
    <column name="enabled" />
    </field>
    <field name="userInfo" persistence-modifier="persistent"
    default-fetch-group="true" dependent="true">
    <extension vendor-name="jpox"
    key="implementation-classes"
    value="edu.ucsc.whisper.core.DefaultUserInfo" />
    <extension vendor-name="kodo"
    key="type"
    value="edu.ucsc.whisper.core.DefaultUserInfo" />
    </field>
    <field name="authorities" persistence-modifier="persistent"
    table="user_authorities"
    default-fetch-group="true">
    <collection
    element-type="edu.ucsc.whisper.core.DefaultAuthority" />
    <join column="userId" delete-action="cascade"/>
    <element column="authorityId" delete-action="cascade"/>
    </field>
    <field name="organizations" persistence-modifier="persistent"
    table="user_organizations" mapped-by="user"
    default-fetch-group="true" dependent="true">
    <collection
    element-type="edu.ucsc.whisper.core.DefaultOrganization"
    dependent-element="true"/>
    <join column="userId"/>
    <!--<element column="organizationId"/>-->
    </field>
    </class>
    </package>
    </jdo>
    --- DefaultUser.jdoquery ---------------------------------------------
    <?xml version="1.0"?>
    <!DOCTYPE jdo PUBLIC
    "-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
    "http://java.sun.com/dtd/jdo_2_0.dtd">
    <jdo>
    <package name="edu.ucsc.whisper.core">
    <class name="DefaultUser">
    <query name="UserByUsername"
    language="javax.jdo.query.JDOQL"><![CDATA[
    SELECT UNIQUE FROM edu.ucsc.whisper.core.DefaultUser
    WHERE username==searchName
    PARAMETERS java.lang.String searchName
    ]]></query>
    <query name="DisabledUsers"
    language="javax.jdo.query.JDOQL"><![CDATA[
    SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
    enabled==false
    ]]></query>
    <query name="EnabledUsers"
    language="javax.jdo.query.JDOQL"><![CDATA[
    SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
    enabled==true
    ]]></query>
    <query name="CountUsers"
    language="javax.jdo.query.JDOQL"><![CDATA[
    SELECT count( this ) FROM edu.ucsc.whisper.core.DefaultUser
    ]]></query>
    </class>
    </package>
    </jdo>

    I'm sorry, I have no idea. I suggest sending a test case that
    reproduces the problem to support.

  • Managed Server Startup failed after upgrade to 11.1.1.6 from 11.1.1.4

    We tried to upgrade from SOA Suite 11.1.1.4 to 11.1.1.6.
    After upgrade when we tried to start our managed servers we get the below error. Did anyone ran into this? If so how did you resolve it?.
    Its still referring to some Weblogic 10.3.4 libraries. We were not able to find out where..
    <Mar 22, 2012 3:21:29 PM CDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub
    java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:610)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:577)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:482)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:376)
    at weblogic.jndi.Environment.getContext(Environment.java:315) Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308) at java.lang.ClassLoader.loadClass(ClassLoader.java:247) Truncated. see log file for complete stacktrace>
    The WebLogic Server encountered a critical failure
    Reason: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl
    Exception in thread "Main Thread" java.lang.AssertionError: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:145) at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:124) at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLInitialContextFactoryDelegate.java:427) at weblogic.jndi.Environment.getInitialReference(Environment.java:245) at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:1083) at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:429) at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:415)
    at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:206) at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:482) at weblogic.Server.main(Server.java:71)
    Thanks,
    Jp

    Hi,
    I found an oracle note with the next solution:
    Add -Xverify:none to the JVM Arguments in the WebLogic console if you're using Node Manager to start managed servers:
    1. Go into WebLogic Console
    2. Navigate to Environment> Servers> [Sever_name]> Server Start> Arguments
    3. Add -Xverify:none to the arguments
    4. Restart the WebLogic server
    5. Retest the issue.
    6. Migrate the solution as appropriate to other environments.
    Or
    If you're not using Node Manager to start managed servers:
    Edit the WebLogic start-up script to add -Xverify:none to the JVM arguments
    See if it works for you
    Arik

  • Call failed constantly after upgrade to OS 4.2

    Has anyone else suffering the same problem? My iPhone 4 just keeps failing to make a call after upgrading to OS 4.2. The strange thing is that it seems this just happens within vodafone's 2G network. If I turn 3G on, there is no problem with call failed. However, I normally turn 3G off for getting longer battery life. Is it a problem with the phone? or it is the network problem? Has anyone got the idea?

    I am having similar problems connecting calls and having calls drop since upgrading to 4.2.1. Been on to Vodafone to sort but they don't seem to be having issues. From searching online, seems to be an issue after the last upgrade. Not sure what to do next. Happens on 2G and 3G for me

  • Vpn fails after upgrade to 10.8.5

    After upgrading from SL to Mountain Lion the Apple vpn client connections fail. They were connecting fine before the upgrade. They also work fine from other computers (Windows) on my network to the same addresses, so the remote side is functioning, and there have been no changes on the remote side.
    The error message is "The L2TP-VPN server did not respond. Try reconnecting. If the problem continues, verify your settings and contact your Administrator." The Console messages indicate the server does in fact respond, but there is a problem with Phase 1 IKE. Message lines are pasted here with the IP addresses masked (the addresses are correct though).
    10/12/13 5:33:39.340 PM configd[18]: SCNC: start, triggered by SystemUIServer, type L2TP, status 0
    10/12/13 5:33:39.360 PM pppd[2104]: pppd 2.4.2 (Apple version 596.15.2) started by admin, uid 503
    10/12/13 5:33:39.363 PM pppd[2104]: L2TP connecting to server '999.999.999.999' (999.999.999.999)...
    10/12/13 5:33:39.363 PM pppd[2104]: IPSec connection started
    10/12/13 5:33:39.379 PM racoon[2105]: Connecting.
    10/12/13 5:33:39.380 PM racoon[2105]: IPSec Phase1 started (Initiated by me).
    10/12/13 5:33:39.380 PM racoon[2105]: IKE Packet: transmit success. (Initiator, Main-Mode message 1).
    10/12/13 5:33:39.465 PM racoon[2105]: IKE Packet: receive success. (Initiator, Main-Mode message 2).
    10/12/13 5:33:39.469 PM racoon[2105]: IKE Packet: transmit success. (Initiator, Main-Mode message 3).
    10/12/13 5:33:39.583 PM racoon[2105]: IKE Packet: receive success. (Initiator, Main-Mode message 4).
    10/12/13 5:33:39.588 PM racoon[2105]: IKE Packet: transmit success. (Initiator, Main-Mode message 5).
    10/12/13 5:33:42.671 PM racoon[2105]: IKE Packet: transmit success. (Phase1 Retransmit).
    10/12/13 5:33:45.754 PM racoon[2105]: IKE Packet: transmit success. (Phase1 Retransmit).
    10/12/13 5:33:45.760 PM racoon[2105]: Received retransmitted packet from 999.999.999.999[500].
    10/12/13 5:33:48.839 PM racoon[2105]: IKE Packet: transmit success. (Phase1 Retransmit).
    10/12/13 5:33:57.752 PM racoon[2105]: Received retransmitted packet from 999.999.999.999[500].
    10/12/13 5:34:00.832 PM racoon[2105]: IKE Packet: transmit success. (Phase1 Retransmit).
    10/12/13 5:34:09.465 PM pppd[2104]: IPSec connection failed
    10/12/13 5:34:09.466 PM racoon[2105]: IPSec disconnecting from server 999.999.999.999
    About the configuration -- the apple client is using preshared key with ppp user/password auth. The user/password and psk all work in other clients, have re-entered them many times, have deleted then recreated the connection in Network Preferences. Have restarted the racoon service, and even rebooted several times.
    Googled around and found a number of reports of similar problem after upgrade to Lion or Mountain Lion, haven't found anything that works so far. Have disabled my antivirus, have rebooted network router, have changed access control in Keychain Access to allow access from all applications. Can't change the remote side configuration because of other users, need to find a way to solve this on my client side. I do have backups that would allow me to roll back to Snow Leopard, but does anyone have any other solution, would like to have a better alternative. Appreciate any/all suggestions, thanks.

    Thanks again, good point. I wasn't doing this on first few tries but eventually realized I needed to clean up Keychain Access because of all the duplicates I created (orphans) so yes I did delete connection and corresponding keychains then recreate then change access. Along the way I noticed that every time I later applied a change to an existing connection setting I had to return to Keychain Access and change the access control settings again, they revert back to 'confirm' from 'all access' at each change. So even if it worked for me I realize it isn't a permanent fix.
    And iCloud is 'inactive', so I guess Back to My Mac is disabled too, I don't know that app but assume so since it needs iCloud. Is there a better way to be sure it can't interfere? I do think I'm getting some phase 1 traffic out and back to the remote server evidenced by the console log, so seems the ports are not being blocked.

  • I try to purchase pages (after upgrading to maverick) and get this message: Failed to verify the preflight file. It is not signed by Apple.

    I try to purchase Pages (after upgrading to Maverick OS) and keep getting this message:
    Failed to verify the preflight file. It is not signed by Apple.
    How to I get past this?  I cannot find anything referencing preflight file.  Who can identify this?

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ Certificates
    There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to  CRL. Log out, log back in, and test.

  • CMD+ any shortcut doesn't work in Safari after upgrading to Yosemite

    After upgrading from Mavericks to OS X Yosemite 10.10 not a single CMD+ shortcut works?!
    For example CMD+tab works (switching between apps), ctrl+tab works (switching between tabs), but none of these work: CMD+W, CMD+Q, CMD+F, CMD+C, CMD+X, CMD+P...
    They all work perfectly fine in all other apps. It's just Safari.
    Does anyone have any idea why and how to fix this?

    I have a similar pb :
    CMD+SHIFT+1,2,3,... doesn't work in safari.
    I'm using "English interface" with "French keyboard".
    following miladc advice and link (Shortcuts not working on Safari and Firefox),
    I changed my Language pref to French ... so I got "French interface" with "French keyboard" ... and it worked once !!!!
    But it works no more ... very weird
    All I want to do, it's having shortcut for my bookmarklet !

  • Integration of APEX in OBIEE 11g fails after upgrade to APEX 4.2.1

    I used a document from the german APEX forum to integrate Oracle Business Intelligence 11g (OBIEE) with APEX.
    After login in OBIEE a APEX page will be called without login in APEX.
    The Document is called "APEX in Oracle Business Intelligence (Oracle BI) integrieren"
    http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/biee-apex/index.html
    In APEX 4.0 this worked great. After login in OBIEE I could call a APEX page without new login.
    But after upgrading to APEX 4.2.1 now the APEX login mask is displayed.
    OBIEE uses this function to create a APEX session and store the APEX session-id and username in the table apex_biee_session:
    -- Function GET_APEX_SESSION_ID
    -- sets up an APEX session for a BIEE user
    FUNCTION get_apex_session_id (p_username IN VARCHAR2,p_days_valid IN NUMBER DEFAULT 1) RETURN VARCHAR2
    IS
    pragma autonomous_transaction;
    l_session_id NUMBER;
    l_valid_to DATE;
    l_count NUMBER;
    l_password VARCHAR2(4000);
    BEGIN
    l_valid_to := SYSDATE + NVL(p_days_valid,1);
    -- Let us delete expired records:
    BEGIN
    DELETE FROM apex_biee_session
    WHERE valid_to < TRUNC(SYSDATE,'DD');
    COMMIT;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN NULL;
    END;
    -- get next APEX session id:
    l_session_id := apex_custom_auth.get_next_session_id;
    -- Insert the BIEE user and the APEX session id in table APEX_BIEE_SESSION
    INSERT INTO apex_biee_session (username, sessioN_id, valid_to)
    VALUES (UPPER(p_username),l_session_id,l_valid_to);
    COMMIT;
    -- define an APEX user session:
    apex_custom_auth.define_user_session(
    p_user => UPPER(p_username),
    p_session_id => l_session_id);
    htmldb_application.g_unrecoverable_error := TRUE; -- tell apex engine to quit
    RETURN l_session_id;
    EXCEPTION
    WHEN OTHERS THEN RETURN '-99';
    END get_apex_session_id;
    CREATE TABLE "APEX_BIEE_SESSION"
    (     "USERNAME"     VARCHAR2(60),
         "SESSION_ID"     NUMBER,
         "VALID_TO"     DATE,
         CONSTRAINT "APEX_BIEE_SESSION_PK" PRIMARY KEY ("USERNAME","SESSION_ID")
    In APEX this page sentry function is called:
    -- Function PAGE_SENTRY
    -- used as page sentry function in APEX applications
    FUNCTION page_sentry RETURN BOOLEAN
    IS
    l_current_sid NUMBER;
    l_biee_userid VARCHAR2(255);
    l_cookie owa_cookie.cookie;
    l_c_value VARCHAR2(255) := NULL;
    l_cookie_tom owa_cookie.cookie;
    l_c_value_tom VARCHAR2(255) := NULL;
    l_session_id NUMBER;
    l_biee_auth     VARCHAR2(1) := 'N';
    BEGIN
    BEGIN
    -- If normal APEX user authentication is used, cookie LOGIN_USERNAME_COOKIE will be used
    l_cookie_tom := owa_cookie.get('LOGIN_USERNAME_COOKIE');
    l_c_value_tom := l_cookie_tom.vals(1);
    l_biee_userid := UPPER(l_cookie_tom.vals(1));
    EXCEPTION
    WHEN OTHERS THEN NULL;
    END;
    l_session_id := apex_custom_auth.get_session_id; -- in APEX 4.2.1 this returns NULL
    -- Do we have a record in table APEX_BIEE_SESSION with the current session id
    BEGIN
    SELECT UPPER(username) INTO l_biee_userid
    FROM apex_biee_session
    WHERE session_id = l_session_id AND valid_to > SYSDATE;
    l_biee_auth := 'Y';
    EXCEPTION
    WHEN NO_DATA_FOUND THEN l_biee_userid := 'Failed';
    END;
    IF l_biee_userid = 'Failed' THEN
    IF l_c_value_tom IS NULL THEN
    l_biee_userid := NULL;
    ELSE
    l_biee_userid := UPPER(l_c_value_tom);
    END IF;
    END IF;
    -- If l_biee_userid is NULL we need to call the APEX login page (done by RETURN FALSE)
    IF l_biee_userid IS NULL THEN
    RETURN FALSE;
    END IF;
    IF l_biee_auth = 'N' THEN
    l_current_sid := apex_custom_auth.get_session_id_from_cookie;
    ELSE
    l_current_sid := l_session_id;
    END IF;
    -- This is the built-in part of the session verification
    IF apex_custom_auth.is_session_valid THEN
    wwv_flow.g_instance := l_current_sid;
    IF apex_custom_auth.get_username IS NULL THEN
    apex_custom_auth.define_user_session(
    p_user => UPPER(l_biee_userid),
    p_session_id => l_current_sid);
    RETURN TRUE;
    ELSE
    IF UPPER(l_biee_userid) = UPPER(apex_custom_auth.get_username) THEN
    apex_custom_auth.define_user_session(
    p_user =>UPPER(l_biee_userid),
    p_session_id =>l_current_sid);
    RETURN TRUE;
    ELSE -- username mismatch. Unset the session cookie and redirect back here to take other branch
    apex_custom_auth.logout(
    p_this_app=>v('APP_ID'),
    p_next_app_page_sess=>v('APP_ID')||':'||nvl(v('APP_PAGE_ID'),0)||':'||l_current_sid);
    wwv_flow.g_unrecoverable_error := true; -- tell htmldb engine to quit
    RETURN FALSE;
    END IF;
    END IF;
    ELSE -- application session cookie not valid; we need a new apex session
    IF l_biee_auth <> 'Y' THEN
    l_session_id := apex_custom_auth.get_next_session_id;
    END IF;
    apex_custom_auth.define_user_session(
    p_user => l_biee_userid,
    p_session_id => l_session_id);
    wwv_flow.g_unrecoverable_error := true; -- tell htmldb engine to quit
    IF owa_util.get_cgi_env('REQUEST_METHOD') = 'GET' THEN
    wwv_flow_custom_auth.remember_deep_link(
    p_url=>'f?'||wwv_flow_utilities.url_decode2(owa_util.get_cgi_env('QUERY_STRING')));
    ELSE
    wwv_flow_custom_auth.remember_deep_link(
    p_url=>'f?p='||
    TO_CHAR(wwv_flow.g_flow_id)||':'||
    TO_CHAR(nvl(wwv_flow.g_flow_step_id,0))||':'||
    TO_CHAR(wwv_flow.g_instance));
    END IF;
    apex_custom_auth.post_login( -- register session in htmldb sessions table, set cookie, redirect back
    p_uname => l_biee_userid,
    p_app_page => wwv_flow.g_flow_id||':'||nvl(wwv_flow.g_flow_step_id,0));
    RETURN FALSE;
    END IF;
    END page_sentry;
    The problem seems to be that in line "l_session_id := apex_custom_auth.get_session_id;" the call of apex_custom_auth.get_session_id is returning NULL in APEX 4.2.1.
    In APEX 4.0 the call of apex_custom_auth.get_session_id returned the APEX session id.
    What can I do to get this working again ?
    Kind Regards,
    Markus
    Edited by: asmodius1 on Jan 10, 2013 2:06 PM

    Hi,
    this integration relies on session fixation, that's an insecure practice which is not allowed anymore since 4.1:
    http://en.wikipedia.org/wiki/Session_fixation
    Since the cookie value for the session id is missing, Apex rejects the session id and sets it to null, before calling the sentry function.
    If you absolutely want to use this kind of integration, you will have to parse the value of owa_util.get_cgi_env('QUERY_STRING') in the sentry function to get the session id. To make it a bit more secure, the row in APEX_BIEE_SESSION should only be valid for a very short time (e.g. 1 sec). A person from Oracle Support contacted me about possible improvements to this authentication a few weeks ago. I replied with the following suggestions:
    I would at least add a Y/N flag (e.g. SESSION_JOINED_BY_APEX) to the
    APEX_BIEE_SESSION table. The page sentry should only accept the session
    without an accompanying cookie if the flag is still N. It has to set it
    to Y afterwards. This way, you ensure that the session joining without
    cookie can only be done once. Maybe there should also be an alternative
    way to log in to APEX, e.g. via page 101. Currently, this authentication
    only accepts session IDs that were generated via OBIEE.
    Users could log out of APEX or the APEX session could expire. Therefore,
    the APEX app should have a post logout procedure that deletes the row in
    the OBIEE session table. On the OBIEE side, APEX_SESSION_ID should
    therefore be initialized on each request. The initialization code should
    also check APEX_WORKSPACE_SESSIONS to make sure the session still
    exists.
    Regards,
    Christian

  • After upgrading to 10.7.2 Time Machine has failed

    Hi everybody,
    After upgrading to Lion 10.7.2 Time Machine has failed and won't mount the Time Machine drive.
    I use a WD My Book Studio LX for my Time machine and also have a smaller WD My Book daisy chained through it in to the iMac with 2 partitions.
    Both of the partitions on the My Book are loading fine and the Studio LX Drive is on and functioning ... the light is blinking away like a good'un ... but the drive won't mount on to the Desktop.
    Has anyone else experienced this or have any possible solutions for it?
    Thanks
    Simon

    I znever realized that you need to add firmware updates, since Apple sells this but doesn't provide any instruction or information on use. I had my WD external since about May and just looked into adding necessary firmware. This was my second drive and was not aware of this necessary upgrade. If failed to recognize my drive so I contacted Westen Digital and after a series of emails they said sorry but Lion is not supported! I was dumbfounded and in disbelief. They tried to
    Get me to upgrade to another model but didn't tell me about any cost. I called the Apple store where I purchased it and talked to. Manager who brought on the phone a genius. He told me he has one and it does work with Lion! He walked me through adding the firmware and there you go Apple knew more than the Tech support at WD! I am hoping someone at Apple will read this and contact WD management and tech support to get their act together.
    Regards,
    Barry

  • Caldavd failing to start after upgrade to Server 3.2.1

    This problem, caldavd not starting after upgrading to Server 3.2.1, is a variation on the theme of PostgresQL not starting.  It too boils down to a postgres database not having been updated properly.  Below are the steps needed to fix this problem:
    sudo su -
    # Change to the directory with the postgres database for the calendars and contacts
    cd /Library/Server/Calendar\ and\ Contacts/Data/Database.xpg
    # Disable caldavd for now
    launchctl unload -w /Applications/Server.app/Contents/ServerRoot/System/Library/LaunchDaemons/org.c alendarserver.calendarserver.plist
    # move the broken database out of the way and build a new empty one
    mv cluster.pg broken-cluster.pg
    mkdir cluster.pg && chmod 700 cluster.pg && chown _calendar:_calendar cluster.pg
    sudo -u _calendar /Applications/Server.app/Contents/ServerRoot/usr/bin/initdb "/Library/Server/Calendar and Contacts/Data/Database.xpg/cluster.pg" -E utf8 --lc-ctype=C
    # Finish the upgrade job that never completed by explicitly invoking the previous version of postgres:
    sudo -u _calendar /Applications/Server.app/Contents/ServerRoot/usr/bin/pg_upgrade -b /Applications/Server.app/Contents/ServerRoot/usr/libexec/postgresql9.2 -B /Applications/Server.app/Contents/ServerRoot/usr/bin -d /Library/Server/Calendar\ and\ Contacts/Data/Database.xpg/cluster.pg.original_for_upgrade/ -D /Library/Server/Calendar\ and\ Contacts/Data/Database.xpg/cluster.pg
    # Mark the newly upgraded database as no longer in need of an upgrade
    sudo -u _calendar touch cluster.pg/.NoRestoreNeeded
    # Start caldavd back up
    launchctl load -w /Applications/Server.app/Contents/ServerRoot/System/Library/LaunchDaemons/org.c alendarserver.calendarserver.plist
    And everything should be the way it should have been in the first place!

    Hi, I have the same issue and Linc Davis pointed me to this thread from Re: Server Calendar migration failed.
    Your solution already got me somewhere, so thanks for that
    I need to note that my machine is on Yosemite (10.10.1) and I'm running Server 4.
    The only issue I have is that I get an error message when running pg_upgrade, the log says:
      pg_upgrade run on Fri Jan 23 09:31:30 2015
    command: "/Applications/Server.app/Contents/ServerRoot/usr/libexec/postgresql9.2/pg_ctl" -w -l "pg_upgrade_server.log" -D "/Library/Server/Calendar and Contacts/Data/Database.xpg/b$
    waiting for server to start....LOG:  database system was interrupted; last known up at 2013-11-02 12:21:52 CET
    LOG:  creating missing WAL directory "pg_xlog/archive_status"
    LOG:  starting archive recovery
    LOG:  restored log file "000000010000000000000002" from archive
    LOG:  invalid magic number D075 in log file 0, segment 2, offset 0
    LOG:  invalid checkpoint record
    FATAL:  could not locate required checkpoint record
    HINT:  If you are not restoring from a backup, try removing the file "/Library/Server/Calendar and Contacts/Data/Database.xpg/broken-cluster.pg/backup_label".
    LOG:  startup process (PID 12315) exited with exit code 1
    LOG:  aborting startup due to startup process failure
    ........................................................... stopped waiting
    pg_ctl: could not start server
    Examine the log output.
    The log talks about removing the backup_label file. When I do that the log says the following:
      pg_upgrade run on Fri Jan 23 09:41:34 2015
    command: "/Applications/Server.app/Contents/ServerRoot/usr/libexec/postgresql9.2/pg_ctl" -w -l "pg_upgrade_server.log" -D "/Library/Server/Calendar and Contacts/Data/Database.xpg/b$
    waiting for server to start....LOG:  database system was interrupted; last known up at 2013-11-02 12:21:52 CET
    LOG:  starting archive recovery
    LOG:  invalid magic number D075 in log file 0, segment 2, offset 0
    LOG:  invalid primary checkpoint record
    LOG:  could not open file "pg_xlog/000000010000000000000001" (log file 0, segment 1): No such file or directory
    LOG:  invalid secondary checkpoint record
    PANIC:  could not locate a valid checkpoint record
    FATAL:  the database system is starting up
    .LOG:  startup process (PID 15068) was terminated by signal 6: Abort trap
    LOG:  aborting startup due to startup process failure
    stopped waiting
    pg_ctl: could not start server
    Examine the log output.
    Thanks already for the help

  • YC_GEN app engine failed after upgrading from EPM 8.9 to 9.1 Rev1

    we tried upgrading our EPM 8.9 + tools 8.49.23 application to EPM 9.1 + tools 8.53.08. After upgrading when we tried to run the YC_GEN app engine it failed with the below error.
    Error:
    17449 20.26.27 0.000111 321: &ln_1 = &lbi_1.Execute();
    17450 20.26.27 0.017373 ErrorReturn-> 2 - Interlink Definition: Execution failed. (122,2) DERIVED_CG_BAT.CG_BATCH_PRV.FieldFormula Name:LoadDepends PCPC:27203 Statement:321
    Called from:YC_GEN_TBLS.MAIN.GBL.default.1900-01-01.UpdDpnds.OnExecute Statement:2
    17451 20.26.27 0.000080 <<< end-ext Nest=01 LoadDepends DERIVED_CG_BAT.CG_BATCH_PRV.FieldFormula Dur=2.480543 CPU=1.190000 Cycles=94840
    17452 20.26.27 0.000028 <<< end Nest=00 YC_GEN_TBLS.MAIN.GBL.default.1900-01-01.UpdDpnds.OnExecute Dur=2.486408 CPU=1.190000 Cycles=94874
    17453 20.26.27 0.008761 Database Options: override_connection_reset: 0
    we tried using libpsfidrvr.so file which delivered with EPM as well as with tools both is not working.

    I resolved my issue. Renamed search.sqlite and reinstalled Firefox 9.0.1
    All default search engines are now available.

  • Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

    Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

    Arghhhhhhhhhhhhhhhhhhh!!!!!!
    After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
    Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
    Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
    The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
    I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive.  But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
    How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
    Words, almost, fail me.

Maybe you are looking for