After Upgrade Cloud Control from 12.1.0.3 to 12.1.0.4 the user name and password have to be entered more than once

Hi everybody,
we recently upgraded our Cloud Control from 12.1.0.3 to 12.1.0.4.
Now we have the following, a little bit strange behaviour.
Everytime we want to log into Cloud Control we have to enter our password more than once.
Sometimes even more than twice.
It alawys says user name and password are required
Does anybody has the same problem?
I didn't found anything on MOS. So any advice or answer is appreciated.
Greetings,
Daniel

Hi Daniel,
We have seen similar issue when we use non-certified browsers for accessing 12c console
Use certified versions of IE with EM 12.1.0.4 Cloud Control. for instance, Microsoft Internet Explorer 10.*, 9.*, 9 and 8 versions only.
This document can help you to understand the Certified Browsers:
<<Doc ID 1912367.1>> EM12c : Supported Browsers and Adobe Flash Players list
Regards,
Rahul

Similar Messages

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

Try this:
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).

How can I hide the user name and password from the url address?

Good afternoon every body,
I have a form running with Oracle9i Developer Suite Release 2 and when I run the form on the web it shows the user name and password of my data base. Can anyone of you please help me to hide the user name and password, if there's any way of course?.
Thanks a lot!!.

Luis,
Then, as inolau's notice, create logon screen (or use the default one) and force the users to logon at runtime. Do not pass username/password as parameters.
inolau,
True that if the connection is specified in the config it will be the same for everyone. However, every case is different. For example one of our apps gets S3 credentials (from non-Oracle S3) as session parameters. It uses this common db connection to validate some stuff with the database, read security definitions and then it re-connects the forms using the credentials.

How do I remove a password from my macbook pro? I have accidentally allowed my user/password to automatically come up when going into a site and want to set so I do it manually. How do i remove it without making any changes to the user name and password

I have accidently checked a box to show a password and username when opening a site. How do I remove these so I can do it manually without having to change either?

Delete it using the Safari menu > Preferences > Passwords

Forgot User Name and Password for Parental Controls

I apparently have forgotten the user name and password for the parental control feature in itunes. How do I recover the information or unlock the controls?

I tried entering the same information as my computer user name and password and it does not work for locking Parental controls. What is weird is I can Log on to Itunes and my computer but it will not lock parental controls. What I am trying to do is keep anyone from changing the settings. Again I enter the same information as my computer but it DOES NOT WORK!!!!

How to read the data from a file in another computer with user name and password login

How to read read the data from a file in anohter computer which need to login with user name and password?

duplicate post: http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2061478
duplicate post: http://forums.ni.com/t5/LabVIEW/do-need-to-enter-the-user-name-and-password-when-TCP-ip/m-p/2061612
duplicate post http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2060682

After updating to iOS 8 my iPad 2 does not keep my user name and password for isp start page

After updating to iOS 8 my i pad 2 does not store the user name and password for my earthlink start page. In past could go to bookmark and the start
page would automatically come up. Now I must enter the user name and password every time to access the personalized start page. tried to find some settings that needed changing but no luck. is this a problem with iOS 8 Earthlink referred me to apple they could not help any help here

Hello nkrlw,
It may be that AutoFill is disabled in Safari, or that Private Browsing is on.
Go to Settings > Safari > Passwords & AutoFill and make sure that Names and Passwords is on.
Go to your Home screen and open Safari. If Safari is black or dark instead of white or gray, Private Browsing is on. Safari doesn't save account names and passwords when Private Browsing is on. To turn off Private Browsing:
On iPad, tap the the plus icon in the upper-right corner of the Safari page, then tap Private in the lower-left corner.
On iPhone and iPod touch, tap in the lower-right corner of the Safari page, then tap Private in the lower-left corner.
Get help using iCloud Keychain
http://support.apple.com/kb/TS4644
Cheers,
Allen

TS4009 before upgrading to Lion, I switched from MobileMe to iCloud. At that time I used my MobileMe user name and password. I purchased additional storage space to 20GB. I was unabl to send any emails during this time. After researching, I upgraded t

before upgrading to Lion, I switched from MobileMe to iCloud. At that time I used my MobileMe user name and password. I purchased additional storage space to 20GB. I was unable to send any emails during this time. After researching, I upgraded to Lion and changed my icloud mail usuer name and password from the original I used from mobileme. How do I get my upgraded storage to my new account. I intend to delete the first one.
Please help!

Welcome to the Apple Community.
Unfortunately you can't, the additional storage belongs to your first account, you can't transfer it.

HT204053 I have an Apple ID and use I Cloud with my Ipad and Iphone. I am trying to publish a website from my macbook but my user name and password is not recognised when I try?

I have an Apple ID and use I Cloud with my Ipad and Iphone. I am trying to publish a website from my macbook but my user name and password is not recognised when I try?

Ken.Lloyd wrote:
Sorry for the delay. System preferences icloud is not an option for me. Syst preferences mobileme is
The minimum requirement for iCloud is Lion 10.7.2 - earlier systems don't show the iCloud preference pane. If you want to use iCloud you will have to upgrade to Lion or Mountain Lion (assuming your computer meets their requirements) but even so you won't be able to publish web pages to iCloud because it does not provide web hosting. This page examines that situation in more detail:
http://rfwilmut.net/missing2

I upgraded to lion. I now have the spinning wheel on the startup screen when I try to enter my user name and password. I tried shutting down and restarting, no luck

I upgraded to lion. I now have the spinning wheel on the startup screen when I try to enter my user name and password. I tried shutting down and restarting, no luck

Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. Yahoo was absouletly no help whatsoever; can you solve the mystery? Thanks

On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. I tried uninstalling and reinstalling FF; no change. Yahoo was absolutely no help whatsoever; can you solve the mystery? Thanks

HI Emmet,
thanks so much for your posts back. I really appreciate it and yes that does help to know that you could not get it working.
I did have some success, in removing the SSL Authentication checkbox in the smtp server settings - I found that this allowed my friend to be able to send mail from the mail app via his sbcglobal (yahoo) account.
So that did help but of course the messages do not have ssl encryption and I'm not sure how big a deal that is for an individual. He is able to receive mail but unless the SSL authentication box is unchecked, he cannot send.
i hope that helps anyone out there also!
Thanks also for the tip about sparrow - yes I have heard of it and it is very popular, he may end up using that in the end.
Thanks again, much appreciated.
Felix

I am trying to deauthorize my audible account. It says the user name and/or password are incorrect after I had just deauthorized the computer using the same user name and password. They should be different correct?

I am trying to deauthorize my audible account. It says the user name and/or password are incorrect after I had just deauthorized the computer using the same user name and password and logging in to post this. They should be the same password correct?

Deauthorize Audible Account... always appears as a menu selection, even if you deauthorized Audible or never even had an account.
Audible is a different account from iTunes and does not require the same username / password.

I had a power failure 2 days ago, have power now, but cannot send email from my iPad. Everything was fine before that. The box says cannot send mail, the user name or password for Gmail is incorrect. I haven't changed anything. I need help. Thanks

Hi
I had a power failure 2 days ago, my computer is running again, but now I cannot send email from my iPad using Cox or my gmail account. I am receiving mail in my Cox account but not my gmail account.It was working fine until the power failure. It keeps telling me, the user name or password for Gmail is incorrect. I have not changed anything. I don't know what is wrong. Can anyone help me? Thanks

I agree, unplug and replug your router, then reset your iPad by holding down the sleep and home buttons, ignore the red power down slider, and wait til you see the silver apple. let it reboot and then try your connection.
Chances are rebooting the router will help. You may also need to talk to cox. They may need to reset something on their end.

After Upgrade Cloud Control from 12.1.0.3 to 12.1.0.4 the user name and password have to be entered more than once

Similar Messages

Maybe you are looking for