After upgrade from 4.6c to ECC6.0 F4 Help is not coming for few date fields

Hi Friends
Just now we have completed upgrade project from 4.6c to ECC6.0.
After upgrade F4 help is not working for some date fields.
For example its working in MB11,Its not working in va01,vf01 like that.
In abap side we checked ...not able to find any issues in coding level, because its a standard SAP code.
So if any solution is there to correct this issue.Kindly help me to resolve this asap.
Thanks
Gowrishankar
Edited by: gowrishankar p on Nov 17, 2009 7:25 AM

Hi
Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable. Hope this will resolve your issue.
Regards,
JB

Similar Messages

After upgrading from 4.6C to ECC 6.0 templates not working in smartform

Hello,
After upgrading from 4.6C to ECC 6.0 templates not working properly in smartform, although value is flowing to the point the template is getting called and inside the template there are text elements where placeholders are kept to display the value, when the print is taken there are no values being displayed by the text elements.
Please note - Text elements doesnot have any conditions present in the condition tabstrip.
Thanks,
Abhishek

Hi,
After the upgrade, you will have to do the security upgrade.
Please follow these steps.
1. Go To SU25
2. Run step 2A to 2D.
3. In step 2C, you shall get the list of all the affected roles.
Click on first role. It will take you to authorizations of that role. Click on the "New" tab there to find the new objects added to the role after the upgrade.
Note: You can open the same role in the unupgraded system to check.
4. Provide the access to the required authorization objects.
5. Disable the unwanted authorization objects.
6. Generate the profile.
7. Follow the same steps for all the affected roles listed.
Please note that you will have a list of new objects added.You need to maintain them inorder to avoid any access issues.
8. After step 2C, complete 2D.
Regards,
Imran

Report Layout Changed After Upgrade from 4.6C to ECC6

Dear Gurus,
I do functional test of every process in ECC6 after upgrade from 4.6C. I found all report layout changed without variant (it's happen to all Query/SQ01 reports ). So I've to assign manually the fields for the reports, and create a default variant then.
Why it happen ? Is there configuration or setting missed or this is standard while we do upgrade ?
Thx in advance.
Tri Wicaksono

We do re arrange for all ALV report ...

Performance problem for mass transactions after upgrade from 4.7 to ECC6.0

Hi All,
After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade the jobs for FPVA with the same variant takes around 9k-10k seconds. I am unable to figure out the cause for exponential increase in the duration of several mass-jobs (after the upgrade). Are there any SAP notes or do we need to do any customizing setting to solve this problem? Does anyone face this kind of problem?
Thanks in advance
Taj

Hi,
This is normal after upgrade to 6.0, I have faced the same in all upgrades I've done and some others that I have involved also. If you did not requests and going live upgrade check I strongly recomend to schedule an Early Watch Check to minimize the impact. Times won´t be the same but can be very close if the system is tuned well. We have tuned systems that now run with good performance after this services.

Invoice Receipt Warning Message Appear After Upgrade from 4.6C to ECC6

Hi Gurus,
We do upgrade from 4.6C to ECC6. And we do Invoice Verification base on Delivery (Vendor delivery number), in our business process there more than one Purchase Order has same Vendor Delivery Number while GR executed. But only one Purchase order related to Invoice verification, others PO are Free PO (no need Invoice Verification).
The problem is:
In SAP 4.6C, while execute Invoice base on Delivery (Vendor delivery), system automatic select only PO with Delivery (vendor) which related/allow invoice receipt.
In SAP ECC6, while execute Invoice base on Delivery (vendor delivery), all PO selected. So than there are warning messages appear (warning pop screen) for those PO not allow invoice Receipt (message M8035: PO item XXXXX does not allow invoice receipt), and at the end PO which allow Invoice receipt then appear for further Invoice Receipt process.
At overall, the final result SAP 4.6C and SAP ECC6 is same (only PO which allowed Invoice Receipt will processed further).
The Question are:
1. Why in ECC6 appear warning message, while in 4.6C no warning message ? Is there config to ignoring the warning message. I've try to maintain system message for M8035 (t-code: OMRM) to ignoring the pop screen, but can not created.
2. How do we make warning message dissapear (no need warning message), because if the PO's has hundred items so user need to click enter hundred times.
Thanks in advance.
Regards,
Tri Wicaksono

Hi,
could you please check whether the flag "GR-based IV" is set in the purchase orders?
If GR based-IV is ticked, then this pop-up cannot be suppressed.
If you would like to post the invoice first then GR-based IV should not be checked, otherwise this pop-up will always appear. I am afraid that this behaviour is standard.
Please, be aware that this feature is only available if you set in the Purchase Order item the 'GR-based IV' indicator:
   If the GR-IV flag is not set in the PO, then the system does not
   differentiate individual goods receipts. Please see the <f1> help
   for the field "GR-IV" in the PO item detail. Since the individual
   receipts are not differentiated, an invoice is not tied per se to
   an individual receipt and a goods receipt can be reversed despite
   an invoice receipt.
With the GR-IV flag set on in a PO, you can specify which goods
   receipt is being invoiced in an IR and which goods receipt is being
   reversed in a return. It is this correlation between goods receipts
   and invoices that enables you to specify for GR-IV PO's whether an
   item can be returned despite an invoice.
Please refer to the note :457511 Question 10.
Best regards
Erika

Error in Auto Generated Reports after upgradation from 4.5B to ECC6

Hi All,
We are currently upgraded the system from 4.5B to ECC6.
We are having many reports with report names such as
'GP0HRYGE9KG1RM5HN4WY9MXC9E4'
'GP0IZ026BMC4SX5K8BISNZ00FSV' with few syntax errors in it.
Can any one suggest whether these are any auto generared reports , as the report starts from 'GP *'.
If so, please suggest how to regenerate the same.
Thanks.
Regards,

Please check the below SAP Note:
[Note 586786 - Short dump PERFORM_NOT_FOUND with forms from SAPLJ1AY|https://service.sap.com/sap/support/notes/586786]
Regards,
Dipanjan

ESS is not working properly after upgrade from 4.7 to ECC6.0

ESS Scenario in 4.7
4.7 Scenario:
The IMG configuration u201CWork and Life Eventsu201D is done to map them with the PZM3 service (Home Page) to get them as different folders/links on the home page as given below:
List of Services used to set up ESS:
Sl.No     Functionality     Service/EWT/URL Name     Standard/ Customized     Type
1     Home Page     PZM3                                          Standard                 Service
2     Inbox                     BWSP                                          Standard                 Service
3     Calendar                     BWCA                                          Standard                 Service
4     Whou2019s Who     PZ01                                          Standard                 Service
5     CPF Display     http://192.168.0.2:7070/omcpf             NA                                  URL
6     Payslip Display     ZPAYSLIP_USER                          Customized                Service
7     Section 80C     PZ88                                          Standard                EWT
8     Section 80                     PZ80                                          Standard                EWT
9     Form 16                     HRESSIN_F16                          Standard                EWT
10     Address                     PZ02                                             Standard                EWT
11     Bank Information     PZ03                                          Standard                Service
12     Open Appraisals     Not Available                           NA                                 Service
13     Emergency Address     PZ05                                           Standard                 EWT
14     Family/Dependents     PZ12                                           Standard                 EWT
15     Personal Data     PZ13                                               Standard                  EWT
16     Previous Employers     PZ28                                           Standard                 EWT
17     Apply Leave     WS20000081                           Standard               Service
18     Leave Overview     WS01000109                           Standard              Service
19     Leave Balance     PZ09                                             Standard              Service
20     Loan Application     ZLOAN                                          Customized              Service
ECC6.0 Scenario:
In ECC6.0, flow based services are no more supported by ECC6.0 and Dynpro based services are supported.PZM3 (Home Page) is a flow based service.
There is no replacement provided for PZM3 service, so the IMG configuration is not possible for u201CWork and Life Eventsu201D.
OSS ticket raised, but no solution for IMG u201CWork and Lifeu201D events.
List of Services would be used to set up ESS:
Sl.No     Functionality     Service/EWT/URL Name     Standard/ Customized    Type
1     Home Page     PZM3                                       Standard                           service
1)this service is not available
2)SAP does not provide any replacement.
3)PZM3 is not supported in Integrated ITS. No direct solution proposed.
4)Given reference of few notes.
5) A dynpro (module pool screen) based IAC needs to be created and links need to be provided on that screen. Generated HTML page is modified to access the services via URL or by OKCODE.
Screenshot attached below.
2           Whou2019s Who                 PZ01                                      Standard                             Service
1)this service Available
2)Not Working properly.
3) The problem may be because of the dependency with SAP Query. Either Query is missing in the new system or not having the proper authorization. Needs to be debugged and finalized.
7     Section 80C     PZ88      Standard     EWT     Available
8     Section 80      PZ80     Standard     EWT     Available
9     Form 16                HRESSIN_F16     Standard     EWT     Available
10     Address                PZ02     Standard     EWT     Available     Only EWT Available.          Service needs to be created to access the EWT.
11     Bank Information     PZ03     Standard     Service     Available     EWT Available.           Service needs to be created to access the EWT.
12     Open Appraisals     Not Available     NA     Service          EWT Available.           Service needs to be created to access the EWT.
13     Emergency Address     PZ05     Standard     EWT     Available     EWT Available.           Service needs to be created to access the EWT.
14     Family/Dependents     PZ12     Standard     EWT          EWT Available.           Service needs to be created to access the EWT.
15     Personal Data     PZ13     Standard     EWT          EWT Available.           Service needs to be created to access the EWT.
16     Previous Employers     PZ28     Standard     EWT          Service Available
17     Apply Leave     WS20000081     Standard     Service     Available, but not working                                                                               No solution is proposed yet.
18     Leave Overview     WS01000109     Standard     Service     Available, but not working               No solution is proposed yet.
19     Leave Balance     PZ09     Standard     Service     Available, but not working               No solution is proposed yet.

Ya ramakrishna,
Even easier is for you to send us the mail ID of your client. We will do the work, then send them an idoc of message type INVOICE and for you a post card of course.
Please do the needfull,
Julius

After upgrading from ASA 8.2 to 9.1(2) not able to get web site

Dears,
ASA Version has been upgraded from 8.2 to 9.1(2). Since then, website is not accessible from outside.
Diagnosis:
Many web sites are deployed behind the ASA. When anyone accesses website from outside, the following error is reported: The page cannot be displayed. No issues have been reported with any other websites.
In the ASA, two different public subnets are in use in order to allow accessing the website from the public domain. No issues have been reported so far with the first subnet. The website is mapped to a public address in the second subnet. When the website is mapped to an IP address in the working subnet, the website is accessible from outside. As a workaround, this is applied and the website is up and running.
As the website is working fine with the second subnet, NAT and ACL configuration is fine. We have turned on logging in the ASDM, but no traffic was observed on the ASA for the non-working subnet. On the other hand, the traffic was noticed on the ASDM for the working subnet.
The working subnet is XX.YY.XX.X
Non working subnet is XX.YY.YY.X
The outside interface ip is XX.YY.XX.X (Working Subnet)
Tried to assign one ip address to the PC from non working subnet and connected to the Switch , its pinging from outside

Hi
Have you tried using packet tracer?

Migrating from eVC++4.0 to VS2008: Menu Bar not coming for class inherited from CProterty sheet

We are migrating code developed in eVC++4.0 to Visual Studio 2008. We are facing a Problem as descripted below. We are using Pocket PC 2003 emulator.
We are creating a class inherited from CPropertySheet. As below:
In Header File:
class COptionsSheet :
public CPropertySheet
      DECLARE_DYNAMIC(COptionsSheet)
#if(WINVER == 0x400)// This works for MenuBAr inherited from CDialog classes.
      CCommandBar m_cb;
#else
      CCeCommandBar m_cb;
#endif
public:
virtual BOOL OnInitDialog();
We are drawing menu bar on the property window as below:
In .CPP file:
IMPLEMENT_DYNAMIC(COrderSheet, CPropertySheet)
BEGIN_MESSAGE_MAP(COrderSheet, CPropertySheet)
ON_COMMAND(ID_CUSTOMER_COLLECTPAYMENT, OnCustomerCollectpayment)
ON_WM_INITMENUPOPUP()
ON_NOTIFY(GN_CONTEXTMENU, 0, OnContextMenu)
END_MESSAGE_MAP()
BOOL COrderSheet::OnInitDialog()
BOOL bResult = CPropertySheet::OnInitDialog();
m_cb.Create(this);//This we have changed for VS 2008 as menu was not appearing for class inherited from CDialog class as well. In eVC++
4.0 code we have used. Please see m_cb in header file discription
m_cb.InsertMenuBar(IDR_ORDER1);// This calis unable to draw mwnu bar
CMenu *pMenu = CWnd::GetMenu();
//pMenu becomes NULL in very next line as we are passing it as parameter below.
gPromotion.LoadSalesPromotions(pMenu,
"Sales", SRC_TRACE_START);
We tried this as well but it’s also not working:
CMenu *pMenu = new CMenu;
      BOOL cehckStatus = pMenu->LoadMenu(IDR_ORDER1);
SetMenu(pMenu);
      CRect r; GetWindowRect(&r);
      r.bottom += GetSystemMetrics(SM_CYMENU);
    MoveWindow(r);
Do we have to change or add something more for the menu bar in case of Property Sheet. Is there any change between eVC++ and Visual studio 2008 that we need to incorporate here.

This forum is for POSReady. Please try one of the Windows CE forums:
http://social.msdn.microsoft.com/Forums/en-US/category/windowsembeddedcompact
-Sean
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

BW FICA extract structures corrupted after upgrade from 4.6C to ECC6

Hi All. After the upgrade an include (FKKBWP) in the extract structure FKKOPBW_BASIC contained a field belonging to the APPEND structure ZAFKKOPBW_BASIC (originating from enhancing the configured structure). Also ZAFKKOPBW_BASIC is not visible in FKKOPBW_BASIC anymore, although when checking/activating the structure it complains about duplicate fields, which can only happen if ZAFKKOPBW_BASIC is still referenced. Furthermore, some new includes have also appeared in the extract, amongst others FKKOPBW_EVOLVED.
I have not been able to find any documentation regarding this. Two different systems were upgraded and the structures were corrupted in both systems in the same way, so this is not a fluke.
The application dumps when one tries to access it via SBIW->Settings for Application-Specific DataSources->Contract accounts receivable->Define Fields for the Extraction of Open Items, because the config and structures do not match.
All of this also applies to the Cleared Items as well.
Has anybody encountered this or can somebody point me to some documentation referering to this problem?
Regards,
Johan Loock

Hi
Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable. Hope this will resolve your issue.
Regards,
JB

Loan:Loan Partner is disappear after upgrade from 4.6C to ECC6

Hey,gus,
Anybody have the same problems?
When we use t-code:FNVS to display old contract(created in 4.6C),Loan partner is disappar.
But I create new contract in ECC6,the loan partner could be showed.
Why?
Anybody know the answer?How can I do for this issue?
Louise

Did you finish BP Upgrade procedure?
Since SAP BP is used instead of TR BP After ECC version, please refer to upgrade guide and fine "Business partner".

S_ALR_87012178 does not show any data after upgrade from 4.6C to ECC6

Hi Gurus,
We do upgrade and do testing to all functional process realted.
When open S_ALR_87012178 in SAP ECC6 no data showed, but in old version (SAP 4.6C) data showed although we select the same parameter selection.
Any setting missed ? or any suggestion about this issue.
Thx in advance.
Tri Wicaksono

Hi Tri,
Check the following.
I have checked your request, and there are two 'ways' the report
will send out the data:
1. In a 'normal' list
If you call the report in the 'standard' way, the data get displayed
in a normal list. This is the standard.
2. If the 'ACCESSIBILITY_MODE' flag is set in the user parameters.
With this flag, the reports output is done with the ALV Grid display.
About this ACCESSIBILITY_MODE flag, refer to the note 929036,
which describes the 'function' of it.
Regards,
Fernando Evangelista

Getting Ora-04030 after upgrading from 9.2.0.6 to 10.2.0.1 for same quey

We recently migrated our database from 9.2.0.6 to 10.2.0.1
The qurey (hefty one wth about 1000+ parameter list in where clause) runs fine in 9.2.0.6
but returns ORA-04030 Out of process memory Error in 10.2.0.1
I have tried to keep all the init.ora paramters same except in 10.2.0.1 I have enabled dynamic Shared memory management.
Any ideas /clues or advice
Thanks
Sunil

Here;s the info
O7_DICTIONARY_ACCESSIBILITY = TRUE
audit_file_dest = /opt/oracle/admin/aos2/audit
background_dump_dest = /opt/oracle/admin/aos2/bdump
core_dump_dest = /opt/oracle/admin/aos2/cdump
cursor_sharing = SIMILAR
db_cache_size = 16M
db_file_multiblock_read_count = 64
db_files = 80
db_keep_cache_size = 400M
db_writer_processes = 2
dml_locks = 1000
fast_start_mttr_target = 900
java_pool_size = 0
job_queue_processes = 5
large_pool_size = 32M
lock_sga = TRUE
log_archive_dest = /opt/oracle/admin/aos2/arch
log_archive_format = 'aos_arch_%t_%s_%r.log'
log_buffer = 14306304
log_checkpoint_interval = 10000
log_checkpoint_timeout = 0
max_dump_file_size = 10240
nls_date_format = YYYY/MM/DD
optimizer_features_enable = 9.2.0
optimizer_mode = FIRST_ROWS_10
parallel_max_servers = 24
parallel_min_servers = 2
pre_page_sga = TRUE
query_rewrite_enabled = TRUE
session_cached_cursors = 50
sga_max_size = 1504M
shared_pool_reserved_size = 30M
shared_pool_size = 0
sort_area_retained_size = 1048576
sort_area_size = 5242880
timed_statistics = TRUE
user_dump_dest = /opt/oracle/admin/aos2/udump
workarea_size_policy = AUTO
compatible = 10.0.0.0.0
control_files = ('/opt/oracle/admin/aos2/datafiles/data01/aos2_control01.ctl', '/opt/oracle/admin/aos2/datafiles/data02/aos2_control02.ctl', '/opt/oracle/admin/aos2/datafiles/data03/aos2_control03.ctl')
db_block_size = 8192
db_name = aos2
open_cursors = 1000
pga_aggregate_target = 500M
processes = 400
sga_target = 1104M
undo_management = AUTO

ABAP Query in Upgradation from 4.7 to ECC6.0

Hi there,
We are upgrading SAP system from 4.7 to ECC6.0. We have s/w component SAP_BASIS = 700.
It would be of great help if anybody share their thought on handling ABAP queries after upgradation from 4.7 to ECC6.0.
We have refered SAP notes 132813 and 672784 where in we need to change the default query area.
Also, do we need to re-genarate the queries? If yes then how can we achive the same.
Thanks in advance.

Hi,
It may happen that some times, the queries are not generated after the upgrade.
Hence call the FM: RSAQ_GENERATE_PROGRAM
Pass the Query name and user group.
For all global queries: refer table AQGQCAT and local/client specific queries: Refer to AQLQCAT.
This can help to regenerate the queries.
You can also write a small program to generate using the above FM(one time program) that runs after upgrade
Hope this helps
Regards
Shiva

I have this empty black box in middle of screen with cursor in it after upgrading from SnowLeopard to Mavericks - any help???

I have this black outlined box with cursor stuck in it after upgrading from Snow Leopard to Mavericks -- any help??? I can't get rid of it.

From another thread.
https://discussions.apple.com/message/24902799#24902799
Go to accesibility/zoom/more options/show rectangle... and uncheck that.
Strange outline rectangle on my screen...

After upgrade from 4.6c to ECC6.0 F4 Help is not coming for few date fields

Similar Messages

Maybe you are looking for