After upgrade from DW8 to DWCS6, 2 problems: uploading/downloading (file structure?)
Hi,
I took a big leap and upgraded from DW8 to DWCS6. Also went from MAC G5 PPC to IMAC with Mavericks.
I transferred my site files over and set up a new site in DWCS6, pointing to the site files. No problem.
However, I have run across two problems since then.
1. If I open a file on the local site on the computer, it does not see the images folder. I can navigate to it and re-associate the image, but it is not automatic. I did nothing to change the structure of the local site, except move it as a whole from one computer to another. If I add an additional ../ to the SRC, then it comes up. If I then upload that page, the link still exists correctly. I don't understand the problem at all...please help!
2. When I want to upload a local file using the put command, I get an error message, something like it cannot create a certain folder in which the file exists. However, that file already exists on the remote end. I can drag the file over and then there is no problem.
I believe I can see that the problem is the same with both uploading and downloading, but can't quite figure out how to fix it. Any ideas? I figure this is probably common, or at least, I hope it is!
Thanks in advance,
Linda
Wow, thanks so much for the super-fast reply:
I will attach three images showing what you asked for. When I went back to check I noticed that the local files actually do seem to link up the images...it is only when I bring them down (get them) from the remote site that there is a problem...I'm embarrassed to say that I don't remember it being this way earlier, but since I have done nothing to 'heal it' it might have been....only thing I did do was piece by piece link them up on the pages on which I was working.
Anyway, here are the screenshots. If you need more, or if they are unclear, let me know.
I really appreciate your help. If you write back and I do not answer immediately, it is only because I am out for a while.
Debbie
#1 /users/Madiba/Documents/Sites/Plumsite
#2 /Users/Madiba/Documents/Sites/Plumsite/images
../../images/DVD2/dvd21001m.jpg
Similar Messages
-
Problems after upgrading from 10.2.3 to 10.2.8
After upgrading from 10.2.3 to 10.2.8, itunes "unexpectedly quits" when I try to purchase a song, and safari "unexpectedly quits" when I visit certain websites. Before upgrading, no such problems.
Hello rick,
First of all, welcome to the Apple discussions.
* How did you upgrade the OSX 10.2.3??
* Did you use the combo update?
* Did you run the dick repair permissions before an after
Here is the Combo Update for OSX 10.x
Combo Update
An here is how you use the disc repair permissions
About Disck Repair Permissions
Applications Quits
Let me know if so ...
Discussions is a ongoing process. Hope to see you around anytime you need us, or can offer help to others.
Dimaxum <]:~)) -
Performance problem for mass transactions after upgrade from 4.7 to ECC6.0
Hi All,
After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade the jobs for FPVA with the same variant takes around 9k-10k seconds. I am unable to figure out the cause for exponential increase in the duration of several mass-jobs (after the upgrade). Are there any SAP notes or do we need to do any customizing setting to solve this problem? Does anyone face this kind of problem?
Thanks in advance
TajHi,
This is normal after upgrade to 6.0, I have faced the same in all upgrades I've done and some others that I have involved also. If you did not requests and going live upgrade check I strongly recomend to schedule an Early Watch Check to minimize the impact. Times won´t be the same but can be very close if the system is tuned well. We have tuned systems that now run with good performance after this services. -
ERROR upload: Error in uploadXMLFiles after upgrading from 10.2.0.4
After upgrading from 10.2.0.1 to 10.2.0.4 on a newly installed Oracle server, I could not use dbconsole any more. It would not display the login page at http://myserver:1158/em. I tried different browser IE, FireFox, and Chrome. It is the same. Then I checked the %ORACLE_HOME/{server_sid}/sysman/log/emagent.trc and found this errors in it:
2010-02-04 14:11:45 Thread-2552 WARN command: Job Subsystem Timeout set at 600 seconds
2010-02-04 14:11:45 Thread-2552 WARN upload: Upload manager has no Failure script: disabled
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovering left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovered 0 left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN metadata: Metric collectSnapshot does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric Disk_Path does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
I tried emctl secure, upload, start and stop many times. It is still the same. It is a new server and a new database. Any idea?
TIA!I did not change password. It is not password issue.
According to Oracle support,
1) the error "2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds" can be ignored.
2) The error: 2010-02-05 02:52:19 Thread-3864 ERROR util.files: nmeufile_remove D:/oracle/product/10.2.0/db_1/orsvp04.OCTAGONRESEARCH.COM_vp/sysman/recv\00000000365.lk: Error in lfidlb. Error = 0 (No error)
could be because I used "emctl start agent" , which are not allowed command for DBconsole. The correct one is "emctl start dbconsole"
Thanks for your input! -
After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?
If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install. -
after upgrade from 10.2.0.1 to 10.2.0.4
on windows enterprise manager is not working
Edited by: 830525 on Mar 24, 2012 9:44 AMF:\Documents and Settings\hakem>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://M1C3:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleor
cl service is starting..........................................................
The OracleDBConsoleorcl service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
F:\Documents and Settings\hakem>NET HELPMSG 3547
A service specific error occurred: ***.
EXPLANATION
A service-specific error occurred.
ACTION
Refer to the Help or documentation for that service to determine the problem.
that's what happen while trying to start db console -
Lost Developer Toolbar after upgrade from 4.1 to 4.2
After upgrading from 4.1 to 4.2.1.00.08, we have lost the Developer Toolbar.
Have others run into this with the upgrade or fresh installation of 4.2.1?
If so, what suggestions are there for fixing, short of reinstallation mentioned in this other thread:
{message:id=10692572}
Following the guidance there to look at the instance ID and other preference settings, I compared our three instances. The two that are not having the problem are both at 4.2.0.00.27.
Here are the preferences that exist on our other instances but are null on the problem instance:
APEX_4_1_0_PATCH_12920544
APEX_4_2_0_PATCH_14777994
APP_EXPORT_TO_DB_ENABLED
HPROF_DIRECTORY
INSTANCE_ID
MOBILE_DEVELOPMENT_ENABLED
PRINT_SVR_HOST
PRINT_SVR_PORT
PRINT_SVR_SCRIPTI have asked our support team to review the upgrade log. Re-installation from scratch is an option.
Any advice is welcome.
SkipThanks, Joel.
You inspired me to take a closer look, and look beyond the upgrade.
After the upgrade, my application passed a superficial checkout. Later, I exported my application and in the export file, the Instance ID was not NULL. I had not noticed any problems with how APEX was working.
The problems of the missing Developer Toolbar, Instance ID = NULL, and a new one, did not occur until I removed my application and tested a clean installation of the workspace and application. This is the sequence of events. The immediate triggering cause is clearly one of the following:
1. Deinstall application (ID 820) from APEX 4.2.1.00.08 instance, running 11g (11.1.0.7.0).
2. Remove workspace (PVA_AH9_R12)
3. (drop the parsing schema, xxpva, and related tablespace)
4. (create tablespace and schema user, xxpva)
5. Import workspace (PVA_AH9_R12) from an APEX 4.2.0.00.27 instance.
6. Import application (ID 820) including supporting objects from an APEX 4.2.0.00.27 instance, running 11g (11.2.0.1.0).
The next day I noticed the Developer Toolbar missing problem, and found that Instance ID is NULL.
Also, after Exporting an application in Database format, I cannot download the file from the Export Repository. When I click the filename link, I get 'Access Denied' instead of the normal download dialog.
Does this suggest anything else I should look into?
Do you think I should post this as a new problem/question with more detail about the sequence of events?
Skip -
SSO and Portal is down after upgrade from AS 10.1.2.0.2 to 10.1.2.3. All others are running fine. Any similiar experience and solution?
Thanks.
Andycn=XXX information is missing for the SSO Server (orasso) when going to http://servername:7777/pls/orasso/orasso.home. Is that causing the problem? If so, how can I resolve it?
Thanks.
Andy -
ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard
After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch. -
y iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3 - any solutions out there?
Thanks - got stuck with the upgrade to 10.6.8, but Apple Support was able to navigate me through that, the date settings caused a problem here.
-
Problem with search
After upgrading from 8 to 9.0.1 I no longer have any search engines installed. I would like to install Google as my default search engine. When I click on “get more search engines” I cannot find Google or Bing or …I resolved my issue. Renamed search.sqlite and reinstalled Firefox 9.0.1
All default search engines are now available. -
Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query
Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
FROM COSP CLIENT SPECIFIED
WHERE GJAHR IN SELR_GJAHR
AND KSTAR IN SELR_KSTAR
AND LEDNR EQ '00'
AND OBJNR IN SELR_OBJNR
AND PERBL IN SELR_PERBL
AND VERSN IN SELR_VERSN
AND WRTTP IN SELR_WRTTP
AND MANDT IN MANDTTAB
GROUP BY (GROUP_LIST).
LOOP AT I_COSP .
COSP = I_COSP .
PERFORM PCOSP USING I_COSP-_COUNTER.
CLEAR: $RWTAB, COSP .
CLEAR CCR1S .
ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
endselect.
SELECT
into table
for all entries in table
where.
use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
e.g in your case
sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya -
Unable to get the login page after upgrade from 11.5.10.2 to R12
Hi ,
We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
Pls let me know if someone has come across this issue.
Thanks&Regards,
Apps DBAHi ,
After compile JSP files manually , now we are facing problem after logging.
Error : You have encountered an unexpected error.
Thanks&Regards,
Apps DBA -
Mail server doesn't work after upgrading from SL to ML
My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000" -
After upgrading from SOA 10.1.3.1 to 10.1.4.1 , I cant run any Struts 1 pages from my web application.
I used to have "commons-logging-1.0.4.jar" under j2ee\<INSTANCE_NAME>\applib, and it worked fine before the upgrade, but after I upgraded I get this exception in the application log
11/02/20 18:50:17.31 ClientWeb: Error initializing servlet
java.lang.ExceptionInInitializerError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2315)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4830)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4942)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1144)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:741)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:431)
at com.evermind.server.Application.getHttpApplication(Application.java:586)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1987)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1906)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
at java.lang.Thread.run(Thread.java:595)
Caused by: org.apache.commons.logging.LogConfigurationException: org.apache.commons.logging.LogConfigurationException: No suitable
Log constructor [Ljava.lang.Class;@1c06a6d for org.apache.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError
: org/apache/log4j/Category) (Caused by org.apache.commons.logging.LogConfigurationException: No suitable Log constructor [Ljava.lang
.Class;@1c06a6d for org.apache.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError: org/apache/log4j/Category
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:543)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
at org.apache.struts.action.ActionServlet.<clinit>(ActionServlet.java:209)
... 20 more
Caused by: org.apache.commons.logging.LogConfigurationException: No suitable Log constructor [Ljava.lang.Class;@1c06a6d for org.apache
.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError: org/apache/log4j/Category)
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:413)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
... 24 more
Caused by: java.lang.NoClassDefFoundError: org/apache/log4j/Category
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Class.java:2328)
at java.lang.Class.getConstructor0(Class.java:2640)
at java.lang.Class.getConstructor(Class.java:1629)
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:410)
... 25 more
11/02/20 18:50:17.31 ClientWeb: Error preloading servlet
javax.servlet.ServletException: Error initializing servlet
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4857)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4942)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1144)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:741)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:431)
at com.evermind.server.Application.getHttpApplication(Application.java:586)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1987)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1906)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
at java.lang.Thread.run(Thread.java:595)
11/02/20 18:50:17.31 ClientWeb: 10.1.3.4.0 Started
11/02/20 18:51:35.906 ClientWeb: Servlet error
javax.servlet.ServletException: Error instantiating servlet 'action'. Servlet class org.apache.struts.action.ActionServlet not found
in web-application ClientWeb
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.servletClassNotFound(HttpApplication
.java:4886)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4852
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication
.java:2978)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler
.java:738)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler
.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler
.java:221)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor
.java:303)
at java.lang.Thread.run(Thread.java:595)
I tried moving this jar inside my war module, but problem still occures.
However, if I removed the jar "commons-loging.jar" from "OracleAS_1\webservices\lib", everything works fine!
Any ideas how to solve this problem??It is an old post, but I want to add and ask something anyway:
I had the same problem and solved it through similar steps (didn't get the same errors and added the log4j to my project also) but don't you have the navigation problem?
Now that I have deployed the application the first page that appears after launching the application is my Home.jspx which is not the same page that comes up when I use embedded OC4J to run the application. The Home.jspx is blank and when I enter a link manually:
http://farbod:8888/TestApp/faces/pages/Employees.jspx
instead of http://farbod:8888/TestApp/faces/pages/Home.jspx
I get this error:
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
I also tried changing the initial address throughout the application:
<% response.sendRedirect("faces/pages/Home.jspx"); %>
but I still get the above error.
Thanks,
Farbod
Maybe you are looking for
-
Help required when using Function module F4_INT_TABLE_VALUE_REQUEST
Hi, I wrote the logic as follows. Select-options: s_lgart FOR pa0015-lgart. SELECT lgart FROM t512z INTO TABLE it_temp WHERE infty = '0015' AND lgart IN rlgart. IF NOT it_temp[] IS INITIAL. SORT it_temp BY lgart. DELETE ADJACENT DUPLICATE
-
Error while setting date parameter to an RFC
Hi, I am getting the following error when i am setting a parameter od Date type to an RFC java.lang.ArrayIndexOutOfBoundsException: -1 at com.sap.mw.jco.JCO$MetaData.getType(JCO.java:9201) at com.sap.aii.proxy.framework.core.JcoBaseTypeData
-
Batch input with table control
Hi, i have a problem with the batch input of picking window in vl02n transaction. I need to select a row of the bottom table but i don't know how many lines ara available in the program(different than the number of lines i can see) and it's possible
-
Uninstall Photoshop Elements 6
How do I uninstall Photoshop Elements 6 from my Mac...there's no uninstall anywhere on this computer. I don't want to install Photoshop Elements 10 until I dump #6
-
I am trying to export a movie in Imovie, but I get an error Not enough room inheap room. Can you help me?