After upgrade from SP2010 Foundation to Enterprise, services/features are missing

Hi
I recently upgraded the SharePoint 2010 Foundation, that was installed with TFS 2012, to Enterprise. The upgrade went through. The Products and Configuration wizard ran through to 100% without errors, however there are no Enterprise services available
on the Services on server page.
The main ones that I'm missing (that I really wanted to use) are:
Secure Store
Managed Metadata
Web analytics
SharePoint Server Search
Excel Services
These ones are there (these are non foundation as far as I'm aware)
PerformancePoint services
User Profile and User Profiles Sync
Business Data Connectivity
Also the service applications for the missing services are also missing, where as the services applications for the present services are available to be provisioned.
I've tried re-running the following commands:
Psconfig -cmd helpcollections
Psconfig -cmd services -install
Psconfig -cmd installfeatures
Psconfig -cmd applicationcontent -install
I've also run that Enable upgraded features option in Central Admin that goes through the web apps/Site collections and sites and enables all the enterprise features. That did nothing.
Any ideas?

Run:
Install-SPService
That will install all services on the farm.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

Sharepoint 2013 search broken after upgrade from 2013 foundation to 2013 ent.

Hello
I have tried many of the suggestions that I have found in the forums for this issue but non have worked as of yet.
I have sharepoint 2013 sp1 running on server 2012 R2 connected to SQL 2012 DB, which was upgrade from SharePoint foundation 2013. Everything is working with the exception of the search. the errors are below.
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (1d094485-eab9-458d-a363-4b5e8704048f).
Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Technical Support Details:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
For some reason this is using the farm account which is not the account used for the search service but has full access to the sites and databases. So I'm not sure what or where it is getting an access denied error. Is there any way to find what it is trying
to access? BTW I have disabled the loopback check, verified it has correct access to %windir%\tasks and recreated the search service many times, changed application pool accounts
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (1d094485-eab9-458d-a363-4b5e8704048f).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
Any help you can provide would be greatly appreciated.

Hi ,
According to your description, my understanding is that you encountered the error Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
after you upgraded SharePoint 2013 Foundation to SharePoint Server 2013.
For troubleshooting your issue, please try adding the farm account on the Server local administrator group and see if it is related to permission issue. Then try stopping the Timer Service, clearing
the Configuration Cache and restarting the Timer Service:
http://www.social-point.com/sharepoint-2010-event-id-6482-application-server-administration-job-failed-for-service-instance-microsoft-office-server-search-administration-searchserviceinstance
Best Regards,
Eric
Eric Tao
TechNet Community Support

After upgrade from FB4Beta to FB4, web services no longer returning the same data types.

I just upgraded from FB4 beta to the FB4 release. I'm still running the Flex 3.5 SDK and amnow unable to use a lot of my web services. In the previous FB4 beta, I could generate the proxy classes from the WSDL and would get a ResultEvent that containted either my complex data type or an ArrayCollection of those complex data types.
After I deleted and regenerated the services under the FB4 release, I get a ProxyObject or an ArrayCollection of ProxyObjects. No matter what I try I cannot map those ProxyObjects to my complex data type and it's driving me nuts! The oddest thing is that it didn't break all of my services, just some of them.
I've tried several methods of mapping the ProxyObject to my custom data type but I get a null result every time and no errors.
private function getContactsResult_handleResult(event:ResultEvent):void
    this._contactsList.removeAll();
    if (event.result is ArrayCollection)
        for each (var contact:ContactType in event.result)
            _contactsList.addItem(contact);
    if (event.result is ContactType)
        _contactsList.addItem(event.result as ContactType);
Any suggestions?

It looks like this was a combination of the upgrade,
increasing use of ASP files and not having seperate application
pools in IIS.
We've just starting edding aspx apps, previously we only had
one asp app so we only used the default app;icaton pool in iis.
With the errors in the virtual directory started, we deleted and
remade the VD with it's only application pool. That appears to have
resolved the issues. The only concern I have is one of the VD did
have it's own applicaton pool and still had the very slow response
after the upgrade. But I'll see how this solution works for the
future.
The decesion was made to only have cf8 installed since that
worked well on our testing server, so we did intend to overwrite
the CFIDE folder.
Thanks for checking this out and for your time on this.
At this point I consider this closed. If something else comes
up I'll start a new thread on it.

After upgrading from Prosight V6 to V7.5 we are having issue with API's

Team,
Current version 6 of prosight upgraded to version 7.5. We are having our external webservice consumes Prosight webservice which defaulted installed under ProsightWS virtual directory. After up gradation we are running into issue in external application ,application unable to communicate to Prosight new version webservices. Fails in the time of calling in Login method itself in the psPortfoliossecturiy service.
Exception as follows:
“System.Web.Services.Protocols.SoapException: Could not create Security Token for specified User and Password at ProSight.Portfolios.WebServices.WS.psPortfoliosSecuritySOAP.Login(String sUser, String sPassword, Int32 lTimeOut) “
Our web application uses a dedicated user account to interact with Prosight webservice and it runs under windows authentication. Application build on ASP.NET 2.0 and later.
The sad part here is , our web application running perfectly with Prosight v6. :( I would appreciate if anyone could help us to resolve this issue. This is blocking our up gradation from 6 to higher version of prosight.
Thanks for your valuable time
Regards,
Jithesh

Here is the offical documentation from version 8.0 on the backward-compatability of the APIs. This document comes the version 8 installer. Not sure this helps you with the 7.5 issues, but hoping it will help:
Considerations for applications using the PPM Open API via COM
Applications which use the Primavera Portfolio Management (PPM) Open API via any interface (COM, SOAP/RCP or Document/Literal) and were developed and used with previous versions of PPM will continue to operate without the need for recompilation, as Primavera Portfolio Management 8.0 provides full binary backwards compatibility for all of the Open API interfaces. New functionality is available only to applications that are written to take advantage of such functionality.
Note however that any process can only load and use one version of the Microsoft .NET Framework. Therefore, applications developed with the .NET Framework 1.1 cannot use APIs to communicate with software developed using the .NET Framework 2.0 if this would cause the same process to need to load both versions of the .NET Framework.
This means that if any part of an application that uses the Open API which was developed using .NET Framework 1.1 communicates directly with PPM using the COM API (which is in-process), that part of the application would need to be recompiled to target the .NET Framework 2.0. If on the other hand, the application developed using .NET Framework 1.1, only communicates with PPM using SOAP RPC or Web Services (which are out-of-process) then there is no issue.
Instead of recompiling, it is usually sufficient to ”force” the existing executables to actually use the .NET Framework 2.0 instead of the native version of the .NET Framework for which they were compiled (1.1). This can be achieved by using an application config file with the following content:
<?xml version ="1.0"?>
<configuration>
<startup>
<supportedRuntime version="v2.0.50727" />
</startup>
</configuration>
The application config file can easily be created using Notepad or something similar. It does not need to be compiled in any way. It should be named with the exact same name as the executable file plus the suffix “.config”. For example: if the application executable file is called “Tester1.exe” then the config file must be named “Tester1.exe.config”. It must be placed in the same directory as the executable file.
The config file “forces” the application to use the .NET Framework 2.0, which would mean that even when using COM (in-process) Open API calls to PPM, there would still be only one version of the .NET Framework involved in the process (.NET 2.0).
----------------------------------------------------------------------------------------

Error deploying Web Service after upgrading from WL 7.0 No Service Pack to SP5

Hello
I have problem using HttpServletResposneWrapper with a ServletFilter in WLW
7.0 SP5. When I apply the filter to JWS file in Development Mode, following
Exception is thrown when I access a JWS.
===================================================================
java.lang.ClassCastException: servlet.MyServletResponse
at weblogic.knex.dispatcher.HttpRequest.getRequestURL(HttpRequest.java:233)
at weblogic.knex.dispatcher.HttpRequest.(HttpRequest.java:51)
at weblogic.knex.dispatcher.HttpServer.doGet(HttpServer.java:291)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
tStubImpl.java:1094)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:437)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
at
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at servlet.MyFilter.doFilter(MyFilter.java:25)
at
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
ebAppServletContext.java:5632)
at
weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:685)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:3213)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2555)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:251)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:219)
===================================================================
I have looked at "weblogic.knex.dispatcher.HttpRequest" class. It seems like
this class tries to cast the response object to "ServletResponseImpl" class,
so ClassCastException is thrown.
Is there any workaround for this issue, since my code is compliance with
J2EE standard. Thank you very much in advanced.
Regards,
Tinnapat C.
PS. These are my codes.
=====================================================================
package servlet;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpServletResponseWrapper;
public class MyServletResponse extends HttpServletResponseWrapper {
public MyServletResponse(HttpServletResponse response) {
super(response);
=====================================================================
package servlet;
import java.io.IOException;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.ServletException;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.http.HttpServletResponse;
public class MyFilter implements Filter {
private FilterConfig config;
public void init(FilterConfig config) {
System.out.println("Filter.init");
this.config = config;
public void doFilter(ServletRequest request, ServletResponse response,
FilterChain chain) throws ServletException, IOException {
System.out.println("Filter.doFilter");
ServletResponse wrappedResponse = new
MyServletResponse((HttpServletResponse)response);
chain.doFilter(request, wrappedResponse);
public void destroy() {
System.out.println("Filter.destroy");
=====================================================================
<filter>
<filter-name>MyFilter</filter-name>
<filter-class>servlet.MyFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>MyFilter</filter-name>
<url-pattern>*.jws</url-pattern>
</filter-mapping>
=====================================================================

Hello
I have problem using HttpServletResposneWrapper with a ServletFilter in WLW
7.0 SP5. When I apply the filter to JWS file in Development Mode, following
Exception is thrown when I access a JWS.
===================================================================
java.lang.ClassCastException: servlet.MyServletResponse
at weblogic.knex.dispatcher.HttpRequest.getRequestURL(HttpRequest.java:233)
at weblogic.knex.dispatcher.HttpRequest.(HttpRequest.java:51)
at weblogic.knex.dispatcher.HttpServer.doGet(HttpServer.java:291)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
tStubImpl.java:1094)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:437)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
at
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at servlet.MyFilter.doFilter(MyFilter.java:25)
at
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
ebAppServletContext.java:5632)
at
weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:685)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:3213)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2555)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:251)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:219)
===================================================================
I have looked at "weblogic.knex.dispatcher.HttpRequest" class. It seems like
this class tries to cast the response object to "ServletResponseImpl" class,
so ClassCastException is thrown.
Is there any workaround for this issue, since my code is compliance with
J2EE standard. Thank you very much in advanced.
Regards,
Tinnapat C.
PS. These are my codes.
=====================================================================
package servlet;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpServletResponseWrapper;
public class MyServletResponse extends HttpServletResponseWrapper {
public MyServletResponse(HttpServletResponse response) {
super(response);
=====================================================================
package servlet;
import java.io.IOException;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.ServletException;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.http.HttpServletResponse;
public class MyFilter implements Filter {
private FilterConfig config;
public void init(FilterConfig config) {
System.out.println("Filter.init");
this.config = config;
public void doFilter(ServletRequest request, ServletResponse response,
FilterChain chain) throws ServletException, IOException {
System.out.println("Filter.doFilter");
ServletResponse wrappedResponse = new
MyServletResponse((HttpServletResponse)response);
chain.doFilter(request, wrappedResponse);
public void destroy() {
System.out.println("Filter.destroy");
=====================================================================
<filter>
<filter-name>MyFilter</filter-name>
<filter-class>servlet.MyFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>MyFilter</filter-name>
<url-pattern>*.jws</url-pattern>
</filter-mapping>
=====================================================================

After migration from HDD to SSD, thumbnails in iPhoto are missing

Dear Apple-community,
I migrated my system a week ago. I added a SSD to the HDD which is now in an optibay. After adding the SSD I installed Lion from new on the SSD, migrated all programms etc. from the HDD and left only the user-folders on the HDD.
After repairing the rights and linking the user-folders to the system again, I was able to use everything, beside iPhoto.
in iPhoto the thumbnails don't show up. The categories are there, the pictures also, just I don't see them, just black or grey fields. I tried all the options offered by the menu, that appears when you start with cmd-shift. Now I need new solutions, that could help me get back my thumbnails!
Thanks a lot for your help!

I think I would have find the files on the internal HDD after the migration (eventhough they should be visible in Finder after the migration, don't they?) if there were there, even hidden.
I thought they dissappeared, because I made one mistake in following the instructions for the migration of the system to the added internal SSD (keeping user files on the internal HDD): I had to migrate everything but the content of the user folders from time machine to the SSD, but I migrated from my user folder on the internal HDD to the SSD. I had to migrate only the users, not the content of the user-folder. In the end, all this content was deleted from the HDD I migrated the users from.
Anyway, now all this old files on the internal HDD are deleted, because I restored my user-folder from time machine (external HDD) (because there was no folder visible anymore), so I could start the system again with my used options stored in the user-folder. Afterwards time machine started and deleted the old copys on the external harddrive.
Weird.

Special Characters in Packed Field After Upgradation from ECC 5 to ECC 6

Hi All,
After Upgraded from ECC 5 to ECC 6, we are getting error as 'Packed field contains incorrect BCD format'.
I found the error in below code..
CALL METHOD cl_abap_container_utilities=>read_container_c
 EXPORTING
 im_container = j_2iextrct-extrctdata
 IMPORTING
 ex_value = i_rg23part2-i_part2_typ
 EXCEPTIONS
 illegal_parameter_type = 1
 OTHERS = 2.
i_rg23part2-i_part2_typ-EXAED = 0.<0
i_rg23part2-i_part2_typ-CESS = 0.<0
for some packed fields special characters are appearing, which leads to a short dump.
Any Suggestions.....
Thanks,
Satish Reddy.
Edited by: Sathish Reddy on Jun 25, 2010 4:49 PM
Edited by: Sathish Reddy on Jun 26, 2010 11:01 AM
Edited by: Sathish Reddy on Jun 29, 2010 12:58 PM
Edited by: Sathish Reddy on Jun 30, 2010 11:51 AM

HELLO,
Search the form you will get few links.
Also many companies have gone technical upgradation , but not functional upgradation.
Thanks
RK

Search Service Application problems after upgrading from Foundation to Enterprise edition of SharePoint 2013

Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Technical Support Details:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
as well as:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
Search Administration page, the "System Status" shows the following message:
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
try again
Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
running.
Does anyone know how I can resolve this problem?
Thanks!

Hi Joaquin,
According to your description, the error occurred when you re-created the Search Service Application.
Based on the error message, I recommend to verify the things below:
   1. Check if the association between the Search Service Application proxy and the web application is configured.
Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
   2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
    3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

After upgrade from 10.2.0.1 to 10.2.0.4 enterprise manager not working

after upgrade from 10.2.0.1 to 10.2.0.4
on windows enterprise manager is not working
Edited by: 830525 on Mar 24, 2012 9:44 AM

F:\Documents and Settings\hakem>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://M1C3:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleor
cl service is starting..........................................................
The OracleDBConsoleorcl service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
F:\Documents and Settings\hakem>NET HELPMSG 3547
A service specific error occurred: ***.
EXPLANATION
A service-specific error occurred.
ACTION
Refer to the Help or documentation for that service to determine the problem.
that's what happen while trying to start db console

Remote Desktop Connection stop working after upgrade from 10.5.8 to 10.6.1

I too could not connect to a W2K3 server with RDC 2.0.1 after upgrading from Mac OS X, 10.5.8 to 10.6/10.6.1. I have another Mac which is on 10.5.8 and connect fine with the same version of RDC 2.0.1 as well as other PC with Terminal Service Clients.
There is no change on the server side. I have uninstalled and reinstalled RDC 2.0.1 several time and it did not resolve the issue. To rule out firewall/network, I tested with another remote desktop application called CoRD (for Mac) on the same laptop running SL 10.6.1 and it connected to the same W2K3 server fine.
One thing that is worth mentioning (in my case), when it does not connect, RDC totally quit (not running anymore. Not minimize, no cannot connect error message, no little dot on the Dock for RDC, nothing) right after I put in the credential in. When looking at the log entries that are related to RDC in the Console application, I see the following
machine 10.6.1. with RDC 2.0.1 (non-working)
9/22/09 1:17:16 PM [0x0-0x3a03a].com.microsoft.rdc[468] objc[468]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . One of the two will be used. Which one is undefined.
On the 10.5.8 machine with RDC 2.0.1 (working), I see the following entries
9/22/09 1:13:23 PM [0x0-0x24f24f].com.microsoft.rdc[5502] objc[5502]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . Using implementation from /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL .
9/22/09 1:13:39 PM Remote Desktop Connection[5502] * _NSAutoreleaseNoPool(): Object 0x16a25c20 of class NSCFArray autoreleased with no pool in place - just leaking
Stack: (0x9277af4f 0x92687432 0x93062bf5 0x926ce0fb 0x9723dff5 0x9268d52c 0x92fd447a 0x92fd4753 0x92fd4a48 0x930375da 0x530bac 0x4831a2 0x483750 0x483c0b 0x47a811 0x4796ac 0x485dad 0x47d475 0x5099dc 0x574c70 0x4ade03 0x4ae65d 0x4ae6f7 0x4ac8dd 0x53260c 0x534187 0x4ae76a 0x4ae7d0 0x4ae88e 0x493925 0x4ae13d 0x533b1a 0x53da6c 0x94a48057 0x934b3155 0x934b3012)
Any help would be appreciated

Doing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.

ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

Performance problem for mass transactions after upgrade from 4.7 to ECC6.0

Hi All,
After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade the jobs for FPVA with the same variant takes around 9k-10k seconds. I am unable to figure out the cause for exponential increase in the duration of several mass-jobs (after the upgrade). Are there any SAP notes or do we need to do any customizing setting to solve this problem? Does anyone face this kind of problem?
Thanks in advance
Taj

Hi,
This is normal after upgrade to 6.0, I have faced the same in all upgrades I've done and some others that I have involved also. If you did not requests and going live upgrade check I strongly recomend to schedule an Early Watch Check to minimize the impact. Times won´t be the same but can be very close if the system is tuned well. We have tuned systems that now run with good performance after this services.

Unable to get the login page after upgrade from 11.5.10.2 to R12

Hi ,
We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
Pls let me know if someone has come across this issue.
Thanks&Regards,
Apps DBA

Hi ,
After compile JSP files manually , now we are facing problem after logging.
Error : You have encountered an unexpected error.
Thanks&Regards,
Apps DBA

ORA-12541: TNS:no listener after upgrading from 11.1.0.6 to 11.1.0.7

After upgrading from 11.1.0.6 to 11.1.0.7, I get the error: ORA-12541: TNS:no listener.
I have attached my tnsnames.ora, listener.ora and my sqlnet.log.
I have tried deleting the listener and re-adding it and I get the same error.
I have tried adding a new database and it errored at 97% because it couldn’t connect to the listener, but still seemed to create the database.
Any suggestions would be appreciated
My tnsnames.ora file:
# tnsnames.ora Network Configuration File: C:\Oracle\product\11.1.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = tebxjt)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
my listener.ora file:
# listener.ora Network Configuration File: C:\Oracle\product\11.1.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = tebxjt)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
my sqlnet.log:
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=tebxjt)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)(CID=(PROGRAM=C:\Oracle\product\11.1.0\db_1\jdk\jre\bin\java.exe)(HOST=tebxjt)(USER=739179))))
VERSION INFORMATION:
 TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
 Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 21-JUL-2010 16:53:37
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0

Hi,
What is your ORACLE_SID name of your database. Have you checked in given above output there is two things:
1.
Service "orcl.us.oracle.com" has 1 instance(s).
Instance "orcl", status BLOCKED, has 1 handler(s) for this service...
Service "orcl_XPT.us.oracle.com" has 1 instance(s).
Instance "orcl", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
The status BLOCKED is coming instead of READY
2. From
+"+
+my listener.ora file:+
+# listener.ora Network Configuration File: C:\Oracle\product\11.1.0\db_1\network\admin\listener.ora+
+# Generated by Oracle configuration tools.+
+LISTENER =+
+(DESCRIPTION_LIST =+
+(DESCRIPTION =+
+(ADDRESS = (PROTOCOL = TCP)(HOST = tebxjt)(PORT = 1521))+
+(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))+
+)+
+)+
Here what i feel complete linstner.ora should be have two parts one LISTENER and another SID_LIST_LISTENER :
LISTENER =
(ADDRESS_LIST=
 (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
 (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
SID_LIST_LISTENER=
(SID_LIST=
 (SID_DESC=
 #BEQUEATH CONFIG
(GLOBAL_DBNAME=salesdb.mycompany)
(SID_NAME=sid1)
(ORACLE_HOME=/private/app/oracle/product/8.0.3)
In your case SID_LIST_LISTENER part is missing.
In this part you have to set SID_NAME and ORACLE_HOME value of new 11g home.
Hope this will help you.
Regards
Rajinder

Bad performance on CF9 after upgrade from CF8

Hello and happy new year for everybody
I'm stuck with a problem after upgrade from CF8 entreprise to CF9 entreprise.
We are using IIS6 on WIN2003R2 (SP2).
There are a lot of "503 Server Error" with no content. (about 0.05% of request). This can be occured on big or small CFM, graphic ressources, etc...
For each error I can see the following error on the connector logs (jrun_iis6_wildcardYYMMDD.log).
2011-01-02 19:00:05 jrISAPI[1456:3940] returning error page for JRun too busy or out of memory
I've never seen this message in previous CF connector version.
And on the jrun log (coldfusion-outXXX.log), I read the following errors:
02/01 20:53:31 error unexpected end of part
java.io.IOException: unexpected end of part
    at com.oreilly.servlet.multipart.PartInputStream.fill(PartInputStream.java:96)
    at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:191)
    at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:152)
    at com.oreilly.servlet.multipart.FilePart.write(FilePart.java:257)
    at com.oreilly.servlet.multipart.FilePart.writeTo(FilePart.java:215)
    at coldfusion.filter.FormScope.fillForm(FormScope.java:252)
    at coldfusion.filter.FusionContext.SymTab_initForRequest(FusionContext.java:376)
    at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:33)
    at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
    at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)
    at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:126)
    at coldfusion.CfmServlet.service(CfmServlet.java:200)
    at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
    at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
    at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
    at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
    at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
    at jrun.servlet.FilterChain.service(FilterChain.java:101)
    at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
    at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
    at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
    at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
    at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
    at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
    at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
02/01 20:53:31 error (JRun Service: ProxyService [jrun.servlet.jrpp.JRunProxyService@4006ca]) JRunPRoxyServer.invokeRunnable:
java.lang.IllegalStateException
    at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
    at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
    at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
    at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
    at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
    at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
    at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
    at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
java.lang.IllegalStateException
    at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
    at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
    at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
    at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
    at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
    at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
    at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
    at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Connector settings (jrun_iis6_wildcard.ini) :
verbose=false
Buffer=true (I've tried with false)
serverstore=C:/ColdFusion9/runtime/lib/wsconfig/1/jrunserver.store
bootstrap=127.0.0.1:51800
apialloc=false
maxworkerthreads=100 (I've tried to increase/decrease this value)
JRUN settings:
Threads number: 150
Max queued jrun threads: 150
Is anyone have experience the same issue ? How can I try to solve this ?
Big thanks!

@Charlie:
in the cf\runtime\logs there is only that kind of information:
05/01 10:28:44 error unexpected end of part
java.io.IOException: unexpected end of part
    at com.oreilly.servlet.multipart.PartInputStream.fill(PartInputStream.java:96)
    at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:191)
    at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:152)
    at com.oreilly.servlet.multipart.FilePart.write(FilePart.java:257)
    at com.oreilly.servlet.multipart.FilePart.writeTo(FilePart.java:215)
    at coldfusion.filter.FormScope.fillForm(FormScope.java:252)
    at coldfusion.filter.FusionContext.SymTab_initForRequest(FusionContext.java:376)
    at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:33)
    at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
    at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)
    at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:126)
    at coldfusion.CfmServlet.service(CfmServlet.java:200)
    at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
    at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
    at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
    at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
    at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
    at jrun.servlet.FilterChain.service(FilterChain.java:101)
    at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
    at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
    at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
    at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
    at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
    at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
    at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
05/01 10:28:44 error (JRun Service: ProxyService [jrun.servlet.jrpp.JRunProxyService@16c00e2]) JRunPRoxyServer.invokeRunnable:
java.lang.IllegalStateException
    at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
    at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
    at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
    at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
    at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
    at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
    at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
    at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
java.lang.IllegalStateException
    at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
    at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
    at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
    at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
    at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
    at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
    at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
    at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
There is no line about a memory issue!
These errors happening on random request not ALL!! (arround 0.05%), and there is no real link between load and this... Our applications handle a lot of POST download, but like I've described before, error can occured on classic cfm page and static ressource...
What I mean with upgrade CF8 to CF9, is with our 10 other servers running on CF8, I've never see that 503 issue outside a real jrun problem (like a memory crash, restart, etc...)
@Carl:
Server is running on WIN2003R2SP2 32 bits OS (dual Xeon E5506, 4Go RAM). Here is the jvm.config arguments:
# Arguments to VM
java.args=-server -Xms1024m -Xmx1024m -Dsun.io.useCanonCaches=false -XX:PermSize=256m -XX:MaxPermSize=512m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars
Do you know if it should be possible to try old JRun connector used by CF8 ?

After upgrade from SP2010 Foundation to Enterprise, services/features are missing

Similar Messages

Maybe you are looking for