After upgrade iphone3GS now just shows apple logo

after upgrading my iphone 3GS just shows apple logo and is frozen
please help.

Read:   http://support.apple.com/kb/HT1808?viewlocale=en_US&locale=en_US
(I'm assuming the device was not jailbroken)

Similar Messages

  • Failed Leopard installation, now just show apple logo over white screen.

    I just received OS X Leopard (not the new one, I'll buy it tomorrow) in order to upgrade to the new OS X snow Leopard. During the installation (took over 30 minutes to calculate the installation time that it was supposed to be 2 hr 49 min, I don't know if that's the average installation time). After about an hour of installation appeard a big yellow triangle (warning) over a message box saying something like "Installer couldn't verify 'Essentials' on the DVD, please contact the software manofacturer or try to install later". After restart the iMac it never rebooted, just shows the apple logo with the spinning circle, I left it that way last night while I was searching on the net for some help and iMac kept doing the same over 24hrs (apple logo over white screen). After reading on the forums I reboot with command+s and these are the two messages that are coming once and again in an endless loop:
    First Message:
    Aug 29 01:46:56 tony-guerreros-computer com.apple.launchd[1](com.apple.KernelEventAgent[2228]: posix_spawnp("/usr/sbin/KernelEventAgent", ...): No such file or directory
    Second Message:
    Aug 29 01:46:56 tony-guerreros-computer com.apple.launchd[1](com.apple.usbmuxd[2229]: getpwnam("_usbmuxd") failed
    The number [2228] goes to [2229] then [2230] to the fist msg again, then [2231] to the second msg,.... in an endless loop.
    Before this I have never experienced any trouble with this iMac. I don't know what to do now because it doesn't reboot and I don't have any boot disk besides TechTool Deluxe.

    "Ok. But once I got the replacement disk the iMac will boot with the installation disk even though it now stills "gone" and unable to boot by itself? I mean, the installation disk is a bootable disk by itself?"
    Read what you wrote and clarify it. You got the replacement disk? Yes or no. Yes the installer disk is a bootable disk. How else did you try to install Leopard?

  • Plz help!!!!! i have iphone 3g and i have chose the option of reset to factory shipped settings ... but now it does not start .. it just shows apple logo thats it .... plz can anybody help me

    plz help !!!! i have iphone 3g and i tried option to reset my phone to factory shiped settings ..... but now it does not start even .. it just shows apple logo again n again ..... after that i went to recovery mode as stated by apple support and did things as stated .... but then i got the message iphone cannot be restored due to some eror 1015.....can any one please help me .. i will be highly obliged ...

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    From Here
    http://support.apple.com/kb/TS3281
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Note:
    Also consider Deleting any Apps you have Purchased / Downloaded but you now never use...

  • Error 3194 still presist while restoring ipod touch 4g, just shows apple logo and wont start

    Method 1: i have tried almost everything, 'hosts' file editing (adding and deleting that ip gs.apple.com thing)
    Method 2: redsnow, snowbreeze,ireb (custom ispw and fetching thing)...
    now my ipod is in dead case, it just gives apple logo  and wont start.
    Method 3: TS 3.0 and 1.0 checked, certificate xyz... uncheked from intertnet explorer-> internet option -> advanced -> security
    Method 4: netsh xyz  (comand) in cmd...
    Please Help thank you.
    "Details:
    ipod touch 4g
    ios 6.1 installed (lastly)
    jail broken but deleted cydia from it
    then tried to restore it always gave Error 3194,
    then restored it from its backup file after that it didnt opened or just showed apple logo thats it."
    my itunes on dignostic gives this report,
    Microsoft Windows 7 Business Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP xw4400 Workstation
    iTunes 11.1.1.11
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 001AB71808E6CBD8
    Current user is not an administrator.
    The current local date and time is 2013-11-29 04:19:21.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce 8400
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.1.1.11 is currently running.
    iTunesHelper 11.1.1.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {BC8F9388-D244-4F12-92A3-A26318EE6C52}
    Description:    Broadcom NetXtreme Gigabit Ethernet
    IP Address:    192.168.1.102
    Subnet Mask:    255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:    Yes
    DHCP Server:    192.168.1.1
    Lease Obtained:    Fri Nov 29 04:16:55 2013
    Lease Expires:    Fri Nov 29 06:16:55 2013
    DNS Servers:    192.168.1.1
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-11-29 04:18:45.

    lllaass thank u bro, but none worked for me
    i have tried all these methods n above which i mentioned before....
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem
    in the end i went ot market n paid him 1.94$ and he restored it to 6.1.5... and said apple has closed other ios updation except 6.1.5 ...but still thank u soo much learned some new stuff from u...

  • Was updating my iphone 5 s and now is showing apple logo in itunes

    was updating my iphone 5 s and now is showing apple logo in itunes

    Not clear just what you are seeing - does the iPhone screen show the USB cable pointing to iTunes?  If that is what you are seeing then it has entered the recovery mode and has to be restored by following the instructions in http://support.apple.com/kb/HT1808

  • HT201210 how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it :( pls help

    how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it pls help

    From the article that the question was posted from:
    Error 1611
    This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Try reading the solutions you find in the future and follow them.

  • I resets my iphone without disabling touch ID lock, it restarts, apple logo appears, and it stays like that, it never starts till now, just the apple logo appears and stays that way, please give a solution???

    I resets my iphone without disabling touch ID lock, it restarts, apple logo appears, and it stays like that, it never starts till now, just the apple logo and stays that way, please give a solution???

    Hi ahmedsgh,
    I'm sorry to hear you are having issues with your iPhone. If it isn't responding or starting up past the Apple logo screen, you may find the troubleshooting steps outlined in the following article helpful, in particular this portion:
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Regards,
    - Brenden

  • Why my iphone 3gs isnt opening,just showing apple logo? plzhelp me

    few days ago some one help me to breakup the lock. after that im trying to restore itunes but that was hang and showing apple logo .

    Plug it into your computer running iTunes and restore it. You may have to force it into recovery or DFU mode.

  • My iphone 4 is not starting it is just showing apple logo

    after updating to ios 7.0.4 it was working well but after a month it started misbehaving like it shutdown's and automatically
    if it is charged 100% it only workes for 5-10 min
    when i connect to my laptop is just start showing the logo and when i plug it into the charger it starts and when i again connect to laptop it shows the logo
    so is there any solution for it

    Hello, Harshilg. 
    Thank you for the question.  You may find this article helpful in troubleshooting your issue.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If the issue persists, see step 6 of the article.
    Regards,
    Jason H.

  • 3g just shows apple logo and timer

    OK so need a bit of help here
    My iphone just keeps showing the apple logo and timer
    I have tried to restore it a number of times and it just goes back to the same thing.  It also wont let me restore it from the back up and have to do it as a new phone been like this for a week.
    Any ideas what else i can try
    Oh dont know if this is important but the logo doesnt go dull even when i leave the phone only turns of after the battery has died.
    Thanks

    Next step, try DFU Mode Restore.
    Connect iPhone with USB cable to iTunes. Hold both Home and Power buttons for exactly 10 seconds, then let go of Power button, keep holding Home button until iTune detects iPhone in Recovery Mode, usually this take less than another 20 seconds. If the iPhone screen is black, this is DFU Mode. If anything is on the screen this is not DFU Mode. Keep trying the above process until you get DFU Mode (which is Recovery Mode with Black Screen). Then Restore the iPhone Firmware.

  • Macbook pro: first screem just show apple logo

    I have a macbook pro and I was updating some softwares, according to the automatic update and when it finished my computer did not turn on . It stays on the screem with the apple logo and does not move foward. How can I fix it?

    The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime. If your startup volume is encrypted with FileVault, you’ll have to unlock it in Disk Utility before you can do anything with it.
    Mac OS X: Gray screen appears during startup

  • HT201263 iPad 3: it just shows apple logo and even with force shut down it comes up to same.. Last time it went in recovery mode and itune couldnt resotre.... real s````t product... not happy.

    is any one can help? it that a system or just some app issue? and why it happens during charging or just after charging........

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iphone is unlocked I was using it but one day tried to restore and since than its just showing apple logo on screen and phone is dead it does not get verification for serial number and imei from apple

    Hi
    My iphone became dead apple not verifying its serial no not the imei so should I throug in dustbin

    If it was officially unlocked by the carrier it was originally locked to, then it should have been fine.
    If it was hacked in any way to make it function as if it were unlocked, then upon restore the iOS firmware failed to re-install correctly and it is now a brick - so in that case, yup, might as well toss it in the trash.

  • IPhone 5c just showing Apple logo and won't go any further

    Tried swithching it off but will not respond and actually power up

    Plug into your iTunes and do a restore.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    PJRS

  • I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????

    I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????

    It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
    If that still won't work, post back with detailed information as to what exactly does happen as you go through the process.

Maybe you are looking for

  • How do I move a face from one photo to another  in pse 12?

    How do you move a face from one photo to another in PSE 12?

  • Why have my notes and contacts been deleted and my applications won't launch

    I tried using my iPad mini today but both my notes and contacts have been deleted and my applications either won't launch at all or launch for a few minutes and then shutdown. I also tried to download another app which said had been downloaded but I

  • OS 9 Classic?

    I had a HD crash and when I installed a new one, then reinstalled Tiger OS 10.4 it did not install OS 9 Classic in the applications. Can I get it back? If so how?

  • Missing episode - killing series 2

    Hi I've just watched the first three episodes of the killing season two and I notice that episode four is missing. Thanks C

  • IViews in a Web Dynpro?

    Hi everyone! I have a scenario where we have various J2EE applications deployed on the WAS. I am trying to create a simple WD application that integrates these applications together and also providing a few intermediate steps which are other Web Dynp