After upgrade of OLTP, is there a report to tell me what needs replicated?

Hello,
We have just upgraded our OLTP system to ECC 6.0. Various steps of our process chains in BI are abending saying we need to replicate the datasource. Without replicating ALL datasources and activating ALL transfer rules, is there a way to know which individual ones need replicated/activated? I guess I'm looking for a report I can run that will tell me if I have anything in BI that will need to be replicated/activated due to timestamp differences.
Thanks,
Diane

Hi
Generally before Upgrading , we should maintain one Check list for the DS that are needed to be replicated . Now, you have to go and see the Process chain / Info Packages for the DS and make list of them and need to replicate, as there is no othergo to list the Ds to be replicated which is used in your project, just try with RSDS Table (Biside SE16) to have a basic idea which are the Ds you were updating before Upgrade.
Hope it helps and clear

Similar Messages

After upgrade itune 10.5 can not report problem in app purchase in app purchase

after upgrade itune 10.5 can not report problem in app purchase in app purchase

I as well have this issue, on some past purchases it does allow me but others it links to apple support??***

After upgrade to iOS 5 there is a large chunk of data ( 9Gb) on the phone labeled as "Other" in iTunes.

After upgrade to iOS 5 there is a large chunk of data (>9Gb) on the phone labeled as "Other" in iTunes. I suspect this is the music library from before the upgrade. How do I delete this data?

Same happened here on my iphone 4. I heard it's something about bad meta data in the music files but I've no idea. It seems to be fixed by deleting the music from the iphone and then syncing it back on. No need to reset so far luckily!

TS3649 Suddenly i can't export iPhoto slideshows to iDVD after upgrading to 10.8.2 I get the message "CouldNotCreateTmpDir" What do i do to overcome this problem?

Suddenly i can't export iPhoto slideshows to iDVD after upgrading to 10.8.2 I get the message "CouldNotCreateTmpDir" What do i do to overcome this problem? I've been making slideshows for ages using iPhoto and iDVD and it's suddenly stopped. Urgent help needed.

Are you saying that you cannot export a slideshow from iPhoto to the Desktop and then drag it from the Desktop (or the Movie frolder where it can be stored) into an open iDVD menu window?
Export the slideshow at the large or medium size:
They drag the movie file into the open iDVD window. NOTE: do not move the movie file once it's been added to iDVD. That's why it should be placed in folder where you intend to keep it permanently or at least until the iDVD project is completed and burned to a disk image and then to disk.
OT

TS1412 My iPod shuffle periodically skips across multiple songs...playing a song or two and then jumping forward or back multiple songs after playing only moments of a song. Please tell me what I can do to fix this. Thanks

My iPod shuffle periodically skips across multiple songs...playing a song or two in full and then jumping forward or back multiple songs after playing only moments of a song. Please tell me what I can do to fix this situation. Thank you very much.

This is in regards to a 4th gen 40gb clickwheel ipod.
Hi, i've also been having a very similar problem with my ipod as well. I find that regardless of which windows-based pc i use (either my xp laptop @ home, or my win2000 desktop @ work) windows and itunes refuses to recognise my ipod. In windows explorer it will show it as a removable drive, but if i click on it, windows freezes. If I try to disconnect it, I cant because windows keeps reporting that 'the device is being used, try disconnecting later' and so then i shut down my laptop to disconnect it safely.
Lately, like you, i've also noticed that clicking sound it makes. It happens when i connect my ipod to my computer - like the drive inside it is constantly restarting or something, and i get it when i'm playing / charging it in my dock. I've also noticed that when it's playing whilst charging, it just freezes on a song, then skips a couple of songs.
I've just discovered the disgnostic tools on my ipod, so i think i'll run a couple of tests (ie HDD scan) and depending on the outcome, i'll go visit the apple store.

Macbook Pro 2009 runs slowly and freezes. Can someone look at this Etrecheck report and tell me what's wrong?

Macbook Pro 2009 runs slowly and freezes. Can someone look at this Etrecheck report and tell me what's wrong?
Hardware Information:
 MacBook Pro (13-inch, Mid 2009)
 MacBook Pro - model: MacBookPro5,5
 1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
 4 GB RAM
Video Information:
 NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
 OS X 10.9.1 (13B42) - Uptime: 6 days 16:17:8
Disk Information:
 FUJITSU MJA2160BH FFS G1 disk0 : (160.04 GB)
 EFI (disk0s1) <not mounted>: 209.7 MB
 MacBook HD (disk0s2) /: 159.18 GB (29.38 GB free)
 Recovery HD (disk0s3) <not mounted>: 650 MB
 HL-DT-ST DVDRW GS23N
USB Information:
 Apple Inc. Built-in iSight
 Apple Internal Memory Card Reader
 Apple Inc. Apple Internal Keyboard / Trackpad
 Apple Computer, Inc. IR Receiver
 Apple Inc. BRCM2046 Hub
 Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
 com.spsys.driver.IOKitDriver (1.0.0d1)
 com.parallels.kext.usbconnect (8.0 18615.948847)
 com.parallels.kext.hypervisor (8.0 18615.948847)
 com.parallels.kext.hidhook (8.0 18615.948847)
 com.parallels.kext.netbridge (8.0 18615.948847)
 com.parallels.kext.vnic (8.0 18615.948847)
 com.parallels.filesystems.prlufs (2010.12.28)
Startup Items:
 StartupComponent: Path: /Library/StartupItems/StartupComponent
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
 [System] com.adobe.fpsaud.plist 3rd-Party support link
 [System] com.fitbit.galileod.plist 3rd-Party support link
 [System] com.spsecure.daemon.plist 3rd-Party support link
Launch Agents:
 [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
 [System] com.spsecure.useragent.plist 3rd-Party support link
User Launch Agents:
 [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
 [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
 [not loaded] [email protected]
 [not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
 iTunesHelper
 AdobeResourceSynchronizer
 Dropbox
 EvernoteHelper
 Fitbit Connect Menubar Helper
 Google Chrome
Internet Plug-ins:
 Flip4Mac WMV Plugin: Version: 2.4.4.2 3rd-Party support link
 FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
 Default Browser: Version: 537 - SDK 10.9
 AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
 AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
 Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
 QuickTime Plugin: Version: 7.7.3
 OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
 AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 3rd-Party support link
 Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
 iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
 BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
 AirPlay: Version: 1.9 - SDK 10.9
 AppleAVBAudio: Version: 2.0.0 - SDK 10.9
 iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
 Move-Media-Player: Version: npmnqmp 071503000004 3rd-Party support link
 fbplugin_1_0_3: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
 Flash Player 3rd-Party support link
 MacFUSE 3rd-Party support link
Bad Fonts:
 None
Old Applications:
 Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
 /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
 /Library/Application Support/Microsoft/MERP2.0
 Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
 Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
 SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
 /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
 Amazon MP3 Downloader: Version: INFO_PLIST_VERSION - SDK 10.4 3rd-Party support link
Time Machine:
 Skip System Files: NO
 Auto backup: YES
 Time Machine not configured!
Top Processes by CPU:
 37% prl_vm_app
 10% WindowServer
 9% Google Chrome
 1% hidd
 1% Agent
Top Processes by Memory:
 602 MB prl_vm_app
 115 MB Google Chrome
 82 MB Google Chrome Helper
 82 MB Mail
 70 MB Microsoft Word
Virtual Memory Information:
 137 MB Free RAM
 782 MB Active RAM
 718 MB Inactive RAM
 1.50 GB Wired RAM
 23.02 GB Page-ins
 1.21 GB Page-outs

Hey greytdogs,
I would give some of the suggestions in this link a shot:
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
Welcome to Apple Support Communities!
Sincerely,
Delgadoh

After upgrading to iOS4.1 there any green points problem at camera?

I was also had the green circle problem in take photo at the iphone4
If the ios4.0.2 after upgrading to ios4.1 , will not have this problem occur?
have anyone know that ?
thank you

No, the GM is not an unannounced public release. GMs are still beta and just for developers. All Gold Master means is the feature set is finalized but it can still have minor changes and bug fixes prior to release.
If it were an actual public release, you could get it from iTunes rather than torrent sites.

Some iPhoto pictures missing after time machine recovery, were there errors reported during backup that I missed?

Hello. I used time machine/time capsule to automatically back up my sytem over the last 3 years and I used the backups to recover my system to a new hard drive when the original drive began to fail. After recovery, I noticed there are missing photos in iPhoto.
I'm curios where I should look to see why they weren't backed up, and why it wasn't obvious to me at the time that they weren't backed up.
Does time machine explicitly call out issues when it can't back up a file or does it just squirrel a message away in the system log?
I'd like to know because I'd like avoid this issue going forward.
Full disclosure & History -
The hard drive on my late 2009 27" iMac was exhibiting issues and started to go bad. No problem I thought, I'll get a new one and recover the system from my time capsule.
The full recovery was initiated from the OS install media. Upon recovery, the system wouldn't boot. After booting from the OS install media and reinstalling the OS on top of the recovered data the system booted and seemed to retain almost everything. This may not be the best way to recover but it seemed to work.
I additionally had to:
repatch the OS
reinstall iWork
relicense MS Office (otherwise office seemed to be intact)
When I started looking through my iPhoto libraries, there were some events with no pictures (mostly the newer events). I couldn't find the pictures on the time capsule either so I'm curios if there was anyway I could have known that backups weren't completing successfully. I had run a time machine incremental backup before pulling out the old hard drive and it seemed to complete successfully so I'm at a loss. I can understand that as the hard drive began to fail, there may have been issues backing up the data, but I somehow missed it if/when the problems were reported.
Should I go through the old system logs that were backed up on the time capsule and look for backupd messages/errors? Going forward, how do I know if there are backup issues?
It took me a couple weeks to realize the drive was failing. I had noticed that the system performance was getting bad, and the system would occassionally hang. It would come back OK after a restart. I thought it was because the filesystem was getting close to full (30GB left on a 1 TB drive) so I was chasing down cleaning up some data to make more room. There were suggestions in other forums to try and keep the filesystem 10% free.
While moving data from the internal drive to a new external drive (to free up space) the system would hang. I eventually found a couple disk0 errors in the kernel log and I actually witnessed disk0 disappear while running an iostat. I'm thinking it took me too long to know the disk was going bad, and so the pictures I imported over the last 3-4 weeks may be gone.
I still have the original drive so I'll see if anything else can be salvaged from it.
Looking for some suggestions on
1) the ability to know if time machine backups are successful and are in sync with my system
2) the ability to know when there are hardware issues that I should be aware of
If you got to this point, thanks for taking the time to read through all this.
Regards,
-mike

Hi Mike,
I just saw this post and saw no one has responded. You might have figured out but in case, I wanted to let you know what I found out. I had the same problem. Hard drive failure, they installed a new one and my iPhoto pictures were missing. I couldn't find them on Time Machine either which baffled (and frustrated) me b/c I just backed up my drive and I was missing pictures from over a year ago.
I found this article and it allowed me to at least find my pictures...so they weren't lost after all.
https://discussions.apple.com/message/16029742#16029742
As for why they aren't showing up in iPhoto or Time Machine, the lady at the Mac store said it is probably an OS conflict. Which makes sense since I can see the actual pictures in the iPhoto content file (per the article mentioned above). However, I didn't have my computer with me at the store to have a Genius person help me resolve the conflict.
BUT, if you can find the pictures, then maybe you can reimport them into iPhoto? Just a thought.
Good luck!

Uninstall CS2 after upgrade to CS4 - is there a new walktrough

Just upgraded from CS2 Premium to CS4 Premium on Mac 0SX 10.5.6, but left CS2 on there as I wanted to copy over a few preset files etc from CS2 to CS4.
Now I want to remove CS2. I've got an old document link for removing CS2 but it mentions removing directories that I know CS4 has installed or shares (e.g. Adobe Utilities and Adobe Updater)
Is there a new walkthrough or utility to remove CS2 once you have upgraded to CS4?

Buko
That's a bit too succinct and general....
In your apps folder will be a folder call 'Adobe Creative Suite 2'. Within this is an' uninstallers' folder which contains the file 'How to uninstall.pdf'. This file is reproduced (as far as I can tell) at http://kb.adobe.com/selfservice/viewContent.do?externalId=331301
This talks you through the various folders/files to remove.
BUT BEWARE - this was written before CS3/4 existed and as my post (http://www.adobeforums.com/webx/.59b82bde) points out, there will be some folders it suggests you remove, but that CS4 actually need (e.g. Applications/Utilities/Adobe Utilities folder).
I'm seeking a new 'How to Remove CS2 after installing CS4' document myself.
Have spoken to Adobe Tech support today and their suggestion was to "not remove any files/folders you think CS4 may need'.
How flaky is that for Technical Support - some people like to keep their hard drives lean.

After upgrading to 3.0 there is no sound

I buy my Ipod touch 2 gen two days ago. I upgraded the firmware to the new version and everything works fine but there is no sound. I mean no sound at all, music, applications, all are muted up. I reset the settings many times, restore it via iTunes and still have the same problem.
But the worst thing its that I can´t even downgrade to the 2.1.1 firmware, because when I do that, my iPod get stuck on the apple logo screen.
Any advice will be much appreciated

Hi Avi,
var/log/messages is full of references to the DS5100 so maybe its all ok?
Feb 2 23:30:11 ovmdl580 kernel: [ 1307.655264] scsi 3:0:1:8: Direct-Access IBM 1818 FAStT 0730 PQ: 0 ANSI: 5
Feb 2 23:30:11 ovmdl580 kernel: [ 1307.657953] scsi 3:0:2:8: Direct-Access IBM 1818 FAStT 0730 PQ: 0 ANSI: 5
Feb 2 23:30:11 ovmdl580 kernel: [ 1307.668701] scsi 3:0:3:8: Direct-Access IBM 1818 FAStT 0730 PQ: 0 ANSI: 5
Feb 2 23:30:14 ovmdl580 kernel: [ 1310.882964] scsi 4:0:0:8: Direct-Access IBM 1818 FAStT 0730 PQ: 0 ANSI: 5
Feb 2 23:30:14 ovmdl580 kernel: [ 1310.888360] scsi 4:0:1:8: Direct-Access IBM 1818 FAStT 0730 PQ: 0 ANSI: 5
Feb 2 23:30:14 ovmdl580 kernel: [ 1310.892143] scsi 4:0:2:8: Direct-Access IBM 1818 FAStT 0730 PQ: 0 ANSI: 5
Feb 2 23:30:14 ovmdl580 kernel: [ 1310.899848] scsi 4:0:3:8: Direct-Access IBM 1818 FAStT 0730 PQ: 0 ANSI: 5
Feb 2 23:44:19 ovmdl580 kernel: [ 2155.117533] sd 3:0:1:8: rdac: array IBM_DS5100_A, ctlr 1, queueing MODE_SELECT command
Feb 2 23:44:19 ovmdl580 kernel: [ 2156.064176] sd 3:0:1:8: rdac: array IBM_DS5100_A, ctlr 1, MODE_SELECT completed
Feb 2 23:44:23 ovmdl580 kernel: [ 2159.393440] sd 3:0:0:8: rdac: array IBM_DS5100_A, ctlr 0, queueing MODE_SELECT command
Feb 2 23:44:24 ovmdl580 kernel: [ 2160.450160] sd 3:0:0:8: rdac: array IBM_DS5100_A, ctlr 0, MODE_SELECT completed
Feb 2 23:44:25 ovmdl580 kernel: [ 2161.502471] sd 3:0:1:8: rdac: array IBM_DS5100_A, ctlr 1, queueing MODE_SELECT command
Feb 2 23:44:26 ovmdl580 kernel: [ 2162.433826] sd 3:0:1:8: rdac: array IBM_DS5100_A, ctlr 1, MODE_SELECT completed
Feb 2 23:44:29 ovmdl580 kernel: [ 2165.606361] sd 3:0:0:8: rdac: array IBM_DS5100_A, ctlr 0, queueing MODE_SELECT command
hopefully?

After upgrade Oracle AS to run Webutil, Reports no longer found

Recently we update de configuration of Application Server to use the WebUtil features (FileTransfer, etc) but some clients can not view the reports (the PDF files generated and the previous html page where are passed de parameters to generate de PDF file paramform=yes <--- I mean this parameteter passed to RUN_REPORT_OBJECT_PROC )
The curious thing is that in NetScape it Works fine, but in MS Internet Explorer does not.
Initially we thought that was the problem, a configuration in the client, but after formatting the PC, the problem persists.
In the webutils log (after enable this capabilitiy) does not show anything abnormal:
192.168.0.244:desarrollo: 2006-sep-27 12:19:46.967 WUT[setProperty()] Setting property WUC_SRV_LOGGING to 2
192.168.0.244:desarrollo: 2006-sep-27 12:19:46.967 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.jacob.dll
192.168.0.244:desarrollo: 2006-sep-27 12:19:46.967 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
192.168.0.244:desarrollo: 2006-sep-27 12:19:46.967 WUT[loadSettings()] Local properties file loaded
192.168.0.244:desarrollo: 2006-sep-27 12:19:47.248 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.JNIsharedstubs.dll
192.168.0.244:desarrollo: 2006-sep-27 12:19:47.248 WUT[getProperty()] Getting
In a similar topic we read that it could be a problem with the reports classpath, but why webutils configuration works in some clients and with others does not?
In the RUN_REPORT_OBJECT_PROC function instead using relative address for the reports servlet we changed for a complete adress, I mean
RUN_REPORT_OBJECT_PROC(repid,
'/reports/rwservlet')
replaced with:
RUN_REPORT_OBJECT_PROC(repid,
'http://ias.website/reports/rwservlet')
But the problem persists (we have the reports and forms services in the same server)
and after debugging the RUN_REPORT_OBJECT_PROC function, in this line
rep_status := report_object_status(report_message);
report_object_status returns null
Why happends this?
Could you help us? What information need to be posted to this? what else we need to do?
We configured webutils as mentioned in this document: Oracle® Forms Developer
WebUtil User’s Guide
Release 1.0.6
We're using MS Windows 2003 Server, Oracle AS 10g and Oracle DB 10g
The RUN_REPORT_OBJECT_PROC function (procedure) is the same what is mentioned in
http://www.oracle.com/technology/products/forms/pdf/10g/frmrepparamform.pdf

We added the following lines to webutiljini.htm
For IE
<PARAM NAME="BROWSER" VALUE="InternetExplorer">
<PARAM NAME="MAYSCRIPT" VALUE="TRUE">
For NetScape:
BROWSER="Netscape"
MAYSCRIPT="true"
And adding the frmwebutil.jar to the Reports Server ClassPath the problem was solved

CR2008 hangs after upgrade to SP2 when opening a report w/ invalid printer

Hi,
until CR2008 SP1, when I open a report that was formatted for an unknown printer, a messagebox is displayed with that message an I was able to edit the report and/or assign a correct printer to it. After installing SP2 this behaviour is changed in a an "application hang". CR2008 stops responding. When I open that same report in CR2008 SP1 and delete the printer info, the report opens without any problems in CR2008 SP2
THIS I.M.H.O. A SERIOUS BUG!!!!
Regards,
Adri

From the header of this forum:
+Forum: .NET Development - Crystal Reports
This forum is dedicated to topics related to custom application development or deployment with Crystal Reports in .Net. This includes full versions of Crystal Reports as well as those versions of Crystal Reports bundled with Microsoft Visual Studio .Net+
As your query concerns the Crystal Reports Designer, I am moving the thread to the Crystal Reports Design forum.
Ludek

After upgrading to Firefox 8 there are no bookmarks in the sidebar when it is displayed. The bookmarks are there under the Bookmarks menu. History appears in the sidebar

There are no bookmarks in the bookmarks sidebar. The only way I can access my bookmarks is by clicking on the Bookmarks Menu. All booksmarks and folder then show up in the drop down menu - but when I go to organise them, there is nothing listed under Organise. My history will show up in the sidebar. I can't find a way to sort my bookmarks, and don't know if I can save a new bookmark.

Open or close History Sidebar --> CTRL+H 
Open or close Bookmarks Sidebar --> CTRL+B
Click the small "x" to the right of the word History or Bookmarks in the Sidebar will close that sidebar 
If the History Sidebar is open, CTRL+B will close it and open the Bookmarks Sidebar 
If the Bookmarks Sidebar is open, CTRL+H will close it and open the History Sidebar
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How do I email a pdf from my iBooks Library after upgrading to iOS8? There is no Share button.

I Have upgraded my iPad Air to iOS 8 this morning. I cannot share or email a pdf document in my iBooks Library. Any suggestions on how it works?
Thanks.

I still get the share icon on my PDFs, at the top left of the menu - though on some PDFs I only get the 'Print' option on it, they are presumably protected in some way

I have an iPhone 4S and have not been able to access the new phone features after upgrading to ios6. There is no option to decline

I have an iPhone 4S and upgraded to ios6 but do not have access to new phone features! Any suggestions?

Check Settings > Phone > Reply with Message >
     I'll call you later
     I'm on my way
     What's up?
When you get a call, swipe the telephone icon (on the right side of Answer button) to reply.

After upgrade of OLTP, is there a report to tell me what needs replicated?

Similar Messages

Maybe you are looking for