After upgrade OneNote folders cannot sync, show error code: 0xE402005F

I've found many threads discussing OneNote Sync errors, though none of them so far have addressed this error code or specific behavior related to a Sharepoint upgrade.  There also doesn't seem to be a fix discussed for this particular problem.
After upgrading from Sharepoint 2010 to 2013, all upgraded OneNote folders fail to sync with the following error message:
"We're sorry, something went wrong during sync. We'll try again later. (Error code: 0xE402005F)"
Very inspecific error, very little information on how to investigate the problem.  And no references to this error code can be found.
After the upgrade our URLs are the same, so the notebook path information should be intact.  These were mostly folders created by OneNote 2010.  I've used the suggestion to run "onenote.exe /safemode" and reset cache files and settings
to no effect.  Right now my only solution is to access the folders from our old farm, export the contents and then import each page into a newly created notebook.  But, this is just a workaround and not a solution.
Does anyone have advice on what to try next?
Thanks

Hi Brad,
Find a very similar case internaly, it provides the the following approach, which is similar to what you have done.
SharePoint 2010 is migrated to 2013, the Notebooks references are broken, for each notebook we had to fix the references.
1.Downloaded Notebooks to local machine.
2.Then create a new notebook on local machine.
3.Transfer all sections into new notebook.
4.Copy all references folder and files from SharePoint library to desktop
5.For each section built the reference to the folder
6.Close the notebooks and re-launch the onenote.
Thanks
Daniel Yang
TechNet Community Support

Similar Messages

  • I need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009". and after they said "we could not complete your request. There was an error in the App Store. Please try again later (nul

    i need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009".
    and after they said "we could not complete your request. There was an error in the App Store. Please try again later (null)".
    COMPUTER DETAILS: MacBook Pro 13-inch, Mid 2012 OS X Version 10.9.5; Processor 2,5GHz Intel Core i5; Memory 4 Go 1600 MHz DDR3.
    Thanks beforehand!!!

    Error
    what is error code 1009?

  • When i tried to sync my ipod it said "cannot sync. unknown error has occured(-39)

    when i tried to sync my ipod it said "cannot sync. unknown error has occured(-39)"  how do I fix it??

    Are you syncing photos to the ipod? If so, the -39 in this context can sometimes indicate a damaged photo cache. Are you able to sync if you delete your existing photo cache? To find it, see the following document:
    iTunes: Understanding the iPod Photo Cache folder

  • Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?

    Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?
    repeatedly tried from diffierent computers and the same error code pops up (error -1)

    That's a hardware problem which will require a trip to the Apple store for evaluation, unless your phone has been jailbroken, then it's a corrupt hosts file (and we can't help you with that here as it is against the forum's terms of use).

  • I'm now at Sudan. I'm from Bangladesh. After coming Sudan I can't download/install any application from apps store. It shows error code-1009. Now what to do ? can anybody help me....?

    I'm now at Sudan. I'm from Bangladesh. After coming Sudan I can't download/install any application from apps store. It shows error code-1009. Now what to do ? can anybody help me....?

    Are you trying to download apps from the Sudan app store?  If so, you have to have a valid credit card and billing address in the country of the app store to purchase from that app store.
    Some countries also have restrictions on the apps and functions allowed in their countries.

  • Help please! My macbook air (2015) startup showed a folder with question mark so i tried "Command   R" for internet recovery but after few minutes it stopped and showed error.. Please hepl me!

    Help please! My macbook air (2015) startup showed a folder with question mark so i tried "Command   R" for internet recovery but after few minutes it stopped and showed error.. Please hepl me!

    Startup – Question Mark
    Startup Issues - Resolve
    Startup Issues - Resolve (2)
    Startup Issues - Resolve (3)

  • I was downloadin the new software to mi ipod touch 4 gen and it was very slowso i had to cancel the download of the software and i had to synk some stuf but when the synk was done it sed the ipod moyses"s ipod cannot synced anankhown error occurred(13019)

    i was downloadin the new software to mi ipod touch 4 gen and it was very slowso i had to cancel the download of the software and i had to synk some stuf but when the synk was done it sed the ipod moyses"s ipod cannot synced anankhown error occurred(13019)

    Try:
    iTunes: Error 13019 during sync

  • New Ipad and cannot sync contacts; error message unable to load data class info from sync services; reconnect or try again later

    new Ipad and cannot sync contacts; error message on Itunes - unable to load data class info from sync servies; reconnect or try again later

    For Windows - look at this.
    http://support.apple.com/kb/TS1567?viewlocale=en_US
    For Mac - maybe this applies
    http://support.apple.com/kb/TS3744
    I just picked these out by going to the box to the right called - More like This.

  • When syncing phone or ipad to mac, I keep getting "cannot sync unknown error occurred (-50) 1726 items  What does this mean?  What do I do?

    when syncing iphone or ipad to imac, I keep getting "cannot sync unknown error occurred (-50) 1726 items " What does this mean?  What do I do?

    Hello, a couple of old possible fixes...
    http://www.edtechhacks.com/2007/12/solved-itunesiphoto-sync-error-50.html
    http://reviews.cnet.com/8301-13727_7-10435935-263.html

  • My ipod classic keeps showing error code 1439 and says its corrupted and nothing on the site that it says to do is working has anyone else had the problem

    my ipod classic 160 gb keeps showing error code 1439 and says it is corrupted and i have done everything the article on it says to do and still reads the same thing. has anyone else had the same problem if so what can i do to fix it. the ipod is only 2 months old

    If it is under warranty, bring it in to Apple Store, most of our suggestions, comes from the Apple support site..
    Besides Restoring the iPod, there are winsocks which have conflict with iTunes, perhaps, disable those plugins and disconnect the Internet and stop antivirus, while you are Restoring or Syncing the iPod.

  • TS3694 I have an Iphone 3G and trying to sync: Getting error code OxE8004002

    I have an Iphone 3G and trying to sync: Getting error code OxE8004002 . Please provide info on how to resolve.

    The iPhone 3G cannot be updated beyond iOS 4.2.1.

  • Once in a while, I get some errors with every tap on the screen, I've been getting this following error since a few days ago, it says" Your request cannot be processed, Error code 1009" . What is it and what should I do?

    What does this error mean?! " your request cannot be processed, error code 1009".

    Read through this article for iTunes Store troubleshooting:
    http://support.apple.com/kb/TS3297

  • I have a problem for download in app store . it shows error code : 1009

    i have a problem for download in app store . it shows error code : 1009

    https://discussions.apple.com/thread/2439043

  • Help, my iphone is in recovery mode, and itunes shows error code 1

    help me, please. my iphone 4 is stuck in recovery mode, and when trying to restore, itunes shows " error code 1, an unknown error occurred"
    please help!!!

    me to ;/
    [23:05:36.0982] [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
    [23:05:36.0982] [nand_part_core:INF@3169] next 98 pages of boot blocks written with LLB image of size 150080 bytes
    [23:05:36.0982] [nand_part_core:INF@3172] final 156 pages of boot blocks written with random data in full page format
    [23:05:36.0982] entering update_gas_gauge
    [23:05:36.0982] entering update_ir_mcu
    [23:05:36.0982] looking for mcu nub...no entry from path!
    [23:05:36.0982] TiSerialFlasher not supported on this platform. Exiting.
    [23:05:36.0982] entering update_baseband
    [23:05:36.0982] update_baseband: registering for progress notifications
    [23:05:36.0982] create_baseband_update_options: Got imeisv: 16
    [23:05:36.0982] baseband updater options = <CFBasicHash 0x17533030 [0x59b710]>{type = mutable dict, count = 7,
    [23:05:36.0982] entries =>
    [23:05:36.0982]     0 : <CFString 0xcf1e38 [0x59b710]>{contents = "SystemRoot"} = <CFString 0x1761cb70 [0x59b710]>{contents = "/mnt1"}
    [23:05:36.0982]     5 : <CFString 0xcf1dc8 [0x59b710]>{contents = "DisallowFusiing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
    [23:05:36.0982]     6 : <CFString 0xcf1f48 [0x59b710]>{contents = "autoSetupEnv"} = <CFBoolean 0x59b918 [0x59b710]>{value = false}
    [23:05:36.0982]     7 : <CFString 0xcf1e48 [0x59b710]>{contents = "DataRoot"} = <CFString 0x1761e8e0 [0x59b710]>{contents = "/mnt2"}
    [23:05:36.0982]     8 : <CFString 0xcf1d98 [0x59b710]>{contents = "forceUpdate"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
    [23:05:36.0982]     9 : <CFString 0xcf1f58 [0x59b710]>{contents = "disablePing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
    [23:05:36.0982]     10 : <CFString 0xcf1eb8 [0x59b710]>{contents = "IMEISwVersion"} = <CFNumber 0x17533010 [0x59b710]>{value = +16, type = kCFNumberSInt32Type}
    [23:05:36.0982] }
    [23:05:36.0982] update_baseband: querying baseband info
    [23:05:36.0982] bbupdater: BEGIN: Querying info at stage first
    [23:05:36.0982] bbupdater:     BEGIN: Preparing first stage
    [23:05:36.0982] bbupdater:         Requested boot mode:  kBBUBootModeNone
    [23:05:36.0982] bbupdater:         Creating transport, attempts remaining 5...bbupdater:         FAILED(kBBUReturnIOError)
    [23:05:36.0982] bbupdater:         powercycling modem
    [23:05:36.0982] bbupdater:         Creating transport, attempts remaining 4...bbupdater:         FAILED(kBBUReturnIOError)
    [23:05:36.0982] bbupdater:         powercycling modem
    [23:05:36.0982] bbupdater:         Creating transport, attempts remaining 3...bbupdater:         FAILED(kBBUReturnIOError)
    [23:05:36.0982] bbupdater:         powercycling modem
    [23:05:36.0982] bbupdater:         Creating transport, attempts remaining 2...bbupdater:         FAILED(kBBUReturnIOError)
    [23:05:36.0982] bbupdater:         powercycling modem
    [23:05:36.0982] bbupdater:         Creating transport, attempts remaining 1...bbupdater:         FAILED(kBBUReturnIOError)
    [23:05:36.0982] bbupdater:         powercycling modem
    [23:05:36.0982] bbupdater:         Creating transport, attempts remaining 0...bbupdater:         FAILED(kBBUReturnIOError)
    [23:05:36.0982] bbupdater:     END(kBBUReturnIOError): Preparing first stage
    [23:05:36.0982] bbupdater: END(kBBUReturnIOError): Querying info at stage first
    [23:05:36.0982] send_bbupdate_status: sending baseband update status to host
    [23:05:36.0982] update_baseband: calling CFNotificationCenterRemoveEveryObserver
    [23:05:36.0982] update_baseband: bbupdater error: The operation couldn\U2019t be completed. (BBUpdater error 3 - Failed creating a communication transport to baseband.)
    [23:05:36.0982] 0: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
    [23:05:36.0982] 1: BBUpdater/3: Failed creating a communication transport to baseband.
    [23:05:36.0982] unable to convert ramrod error 1004
    [23:05:36.0982] restore failed with CFError:
    [23:05:36.0982] 0: AMRestoreErrorDomain/ffffffff: failed to update device firmware
    [23:05:36.0982] 1: AMRestoreErrorDomain/ffffffff: ramrod firmware update failed
    [23:05:36.0982] 2: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
    [23:05:36.0982] 3: BBUpdater/3: Failed creating a communication transport to baseband.
    [23:05:36.0982] waiting for host to acknowledge final status received...
    [23:05:36.0982] void AppleUSBDeviceMuxXXXXXXXXXXXXXXXXXXX(mbuf_t) received reset, closing 0x97b1e4d0
    [23:05:36.0982] recv(12, 4) failed: connection closed
    [23:05:36.0982] unable to read message size: -1
    [23:05:36.0982] received NULL message from host, expected final status
    [23:05:36.0982] attempting to dump restore log
    [23:05:36.0982] writing log file: /mnt1/restore.log

  • TS3297 What can I do for Message 'Your request cannot be processed Error code: 1009  ?

    Message 'Your request cannot be processed Error code: 1009
    What can I do for above error?

    iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - includes list of iTunes error codes
    If you are asking questions about using iTunes for Windows, there is a forum for that.  This is the iTunes for Mac forum.

Maybe you are looking for

  • Utilities Applications grayed and crossed out, "No longer supported"?

    Originally I wanted to Verify and Repair my Disk Permissions since I've been having difficulty with my disk drive [playing the Sims 3, it told me that there was an error in the Disk Authorization and that the disk was not found in the drive]. Followi

  • Ok on Windows XP but not Windows 7

    Hi, I made an AIR desktop application using Flashbuilder 4.5. I used a Mac with OS Lion for this and the application works fine. My client tested the application on Windows XP and it was fine but when tested on Windows 7 some part of the application

  • BAPI_DOCUMENT_CHANGE2 - Characteristic Number of User-Defined Data Type

    We are using classifications in the DMS system (it is the same classification system as the sales order and a few other transaction types). We also have defined our own characteristic data types.  If we manually go into CV01n and enter in values into

  • Nokia N8 Can not see who's calling / display won't...

    Hi, I have the problem that when I get a call my phone will ring but there is nothing seen onto the display. When I use the unlock button on the side of the phone it unlocks and then I can see who's calling and take the call. When I want to hang-up,

  • Urgent: How to run a form

    Hello, I am using Form Builder 6i. How can I run a form without running it from Form Builder. It is a client/server form. Thank you very much!