After upgrade Sap ECC to ehp4

Hi!
Configuration
Two dialog instance. Central instance works on cluster node. DI works on standalone server. Message server and enq server is separate instanse(ASCS) installed on windows cluster
Check TP
'Could not start transport control program tp RFC error: timeout during allocate / CPIC-CALL:'ThSAPCMRCV''
This error happens only on DI installed on standalone server. If checks tp is started on central instance than error does not appear.
dev_rfc.trc
ERROR file opened at 20120224 135020 Russian Standard Time, SAP-REL 701,0,150 RFC-VER 3 1260209 MT-SL
T:9800 Error in program 'C:\usr\sap\QUA\D00\exe\tp': ======> CPIC-CALL: 'CMACCP : rc=20
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       partner 'clusterpqua.internal.russ-ergo.com:3300' not reached
TIME        Fri Feb 24 13:50:20 201
RELEASE     701
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2845
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     1

Hi.......
Unfortunately you ghave raised your question in Wrong Forum.
Please raise it to correct forum where experts can give you right advice and close this thread from here.......
Thanks & Regards,
Rahul

Similar Messages

Smart form Addon after Upgrade to ECC 6 EHP4

Hi,
I have succesfully upgraded my system from R/3 4.7 EXT 1 to ECC 6 EHP4.
During upgrade i had to delete Pre configured smart forms Addon ( According to note 572392 ) .
Since we are on EHP4 and no smart forms configured we are not able to print.
The latest pre configured smart form addon ( Best Practice all in one) available is for EHP3.
Please let me how to proceed with this situation as there may be other compaines who are on EHP4 and use pre configured smart forms.
Appreciate your help.
Thanks,
FBK

If you have old system copy try to copy forms into the new.
Kind regards,
Mirek

Upgrade SAP ECC 6.0 with SPS 12 to EHP4

Hi!
I would like to update a SAP ECC 6.0 system with EHP4.
I am on Windows 64 Bit with Oracle.
My current SP stack of SAP ECC 6.0 is 12.
The questions are:
Does the SPS 12 of SAP ECC 6.0 fullfil the requirements for the SAP EHP4-Upgrade?
If not what is the strategy to upgrade SAP ECC 6.0 system with SPS 12 to EHP4?
Any helpful information will be very appreciated!
Thank you!

Hi
You can check the below notes
Note 1143022 and 1134872 - Installation of SAP Enhancement Package 4 on SAP ERP 6.0
Regards
Uday

Web Service is not working after Upgrade SAP EHP6

Hi ,
Recently we upgraded SAP ECC 6.0 to EHP 6.
We have a custom web service which is consumed in .NET Application to get the Sold To from Sales Order.
the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
When I tested the Service in WS Navigator in SAP, it is working fine.
We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
we did the below steps.
Regenerated the configuration
Re imported the Certificates
Activated the service in SICF.
Please let me know if anybody have same problem or if any steps we are missing.
thanks.
Uma

after changing the .NET Application , Service is working fine.

ERROR MESSAGE IN PPOME TCODE AFTER UPGRADE TO ECC 6.0

Hi Experts,
I have a question.
Recently our system went for upgrade and during testing phase we have found one issue.
Error message is appearing in PPOME transactio code after upgrade to ECC 6.0
The screen is getting defaulted to Budget section and unable to find the subtype as there are no subtypes available there and showing error message as "Fill in all required fields".
Please let me know your solution on this.
Regards,
Sekhar.

Hi,
- you can deactivate the budget tab in the IMG-activity 'Hide/Show Tab Page'
(SIMG_CFMENUOHP1HFW20 alternatively use SM30 on view 'T77OCTABUS')
1. Create new entries for the following KEY:
a) Scenario OME0
b) Object type 'P', 'O', 'S'
c) Tab Page 'PBC_ORIG'
2. for each of this entries, set the 'Exclude Tab Page'-Flag.
- in case you do not want to deactivate the Budget tab:
The error occurs due to missing entries for subtypes in table T778U
for infotype 1516.
Please maintain the according subtyes you want to use if you create a
budget.
Regards,
Ana

Upgrading SAP ECC 5.0 to ECC6 phase GETSYNC_PREUP_FINI_D

I'm in process of the Upgrading SAP ECC 5.0 to ECC6 And, now it is in upgrade phase GETSYNC_PREUP_FINI_D. But, phase in GETSYNC_PREUP_FINI_D the Upgrade already runs to 24 hours.
============================================
The following START modes are available:
- Repeat phase GETSYNC_PREUP_FINI_D to continue
   the upgrade at the point it stopped.
- Initialize phase GETSYNC_PREUP_FINI_D to restart
   this phase from the beginning.
- Initialize and run another upgrade phase
   (caution, refer to your installation guide).
- Exit this program.
> repeat
>> 2008/10/22 11:49:04 UPGRADE/SWITCH: START OF PHASE GETSYNC_PREUP_FINI_D
The parallel running J2EE upgrade needs some more time...
Please be patient...
===============================================
Database: MSSQL2005
What could be the problem. I can skip it and go to the next stage???
Please help me out solution.?
Regards
Marcelo P. Silva

It seems that you have a combined upgrade - ABAP + Java in your system - is that right? If yes, did you start the Java upgrade in parallel?
Markus

Cannot open survey files from email after upgrading SAP gui to 720

Cannot open survey files attachments from email after upgrading SAP gui from 640 to 720.
Tried uninstalling & reinstalling but still error persists,
Error is : cannot split connection string: /h/server name/s/sapdp00 ( from SAP GUI security )
Please advise.

Can't say I have seen this error before but if it is pertaining to the new security module within 7.20, which are much more strict then 6.40, I would look under the SAP GUI configuration options. Focus on Security > Security settings.
There are pages and pages of rules which can be defined.
A test could be to disable all of them on an isolated machine and set them to allow and see if your problem persists. If the error is resolved, it is something in there you need to address.
Regards,
Zecher

Special Characters in Packed Field After Upgradation from ECC 5 to ECC 6

Hi All,
After Upgraded from ECC 5 to ECC 6, we are getting error as 'Packed field contains incorrect BCD format'.
I found the error in below code..
CALL METHOD cl_abap_container_utilities=>read_container_c
      EXPORTING
        im_container           = j_2iextrct-extrctdata
      IMPORTING
        ex_value               = i_rg23part2-i_part2_typ
      EXCEPTIONS
        illegal_parameter_type = 1
        OTHERS                 = 2.
i_rg23part2-i_part2_typ-EXAED = 0.<0
i_rg23part2-i_part2_typ-CESS   = 0.<0
for some packed fields special characters are appearing, which leads to a short dump.
Any Suggestions.....
Thanks,
Satish Reddy.
Edited by: Sathish Reddy on Jun 25, 2010 4:49 PM
Edited by: Sathish Reddy on Jun 26, 2010 11:01 AM
Edited by: Sathish Reddy on Jun 29, 2010 12:58 PM
Edited by: Sathish Reddy on Jun 30, 2010 11:51 AM

HELLO,
Search the form you will get few links.
Also many companies have gone technical upgradation , but not functional upgradation.
Thanks
RK

Statistical-relevent delivery date not showing up in PO after upgrad to ECC

Hi Gurus,
After upgrade to ECC, Statistical-relevant delivery date (PO Item details --> delivery schedule tab) is not showing up when I convert PR to PO from Stock requirements list(MDO7).
Could you please help me out this issue.

Maintain the item category in your material master at sales organisation level and try again.
Also Please Check the delivery item category determination in trxn code 0184 there you define which item category is to be found for the combination of delivery type NL and item category group.
Regards,
Ashok
Edited by: Ashok Kumar Telikula on Aug 27, 2008 2:35 PM

Barcode doesn't work after upgrade to ECC

Hi All,
In sapscript, we used bardcode. But after upgrade to ECC, it doesn't work.
Could you help me about it??
And we don't want to convert the sapscript to smartforms and use the new barcode technique.
Looking forward you help!!
Thanks & Best Regards,

Hi ,
I think some function moule is missed, please check the driver program also. In production you are getting Barcodes ?. Or otherwise goto se73 - we have bar codes types.. system and printer barcodes . please assign the printer bar codes in output devices.
Best Regards,
Narasimha Rao.

Increased number of journal receivers after upgrade from ECC 5.0 to 6.0

After are upgrade from ECC 5.0 to ECC 6.0 on an iSeries machine we have noticed an increase in the number journal receivers being created by SAP approximately twice as many that were being created on are 5.0 system. I've checked all the attributes for the journal receivers and they were set the same on both versions. This hasn't caused use any issues but just wondering if anyone else has experienced this or knows the cause of this. Thanks, Jason Duncan

After are upgrade from ECC 5.0 to ECC 6.0 on an iSeries machine we have noticed an increase in the number journal receivers being created by SAP approximately twice as many that were being created on are 5.0 system. I've checked all the attributes for the journal receivers and they were set the same on both versions. This hasn't caused use any issues but just wondering if anyone else has experienced this or knows the cause of this. Thanks, Jason Duncan

SE07 doesn't show Import status after upgrade to ECC 6.0

Hi,
we were on 4.7 and we recently upgraded to ECC 6.0 EHP4. When we were on 4.7, after a release, we used to monitor the import status of all the transports going in, using transaction SE07. Looks like this transaction wouldn't work anymore in ECC6.
I can access the transaction, but I cannot expand the "Execution" to see the status of the transports which went in today. 4.7 used to show all the transports which were impoerted on that day.
I know we can check the import logs by pulling up each transport, but SE07 will show you a consolidated list with all the detail and will be very easy to find what we are looking for.
We are on Oracle 11g on Solaris 10. Please help.
Regards,
Vijay

Hi Tony,
I donot think it is an authorization problem. I have tried with a test user with full permissions and also with DDIC user, but still the same.
Regards,
Vijay

Error AA662 in Asset accounting after upgrade to ECC 6

Hi,
After upgrade to ECC6 from R3 Enterprise, when we try to browse an asset, using transaction code AW01N, and go to posted values/Comparisons tab we get the following error:
SYST: You cannot change the depreciation periods
     Message no. AA662
Asset affected: 000000003983-0000
Diagnosis
    Processing terminated because the number of depreciation periods in company code 1100 has been changed. However, you cannot change the number of
    periods in your live (productive) system.
Procedure
    Change the depreciation periods back to the original value in company code 1100. The number of depreciation periods is determined by the fiscal year version and the use of half-periods. At least one of these parameters was changed.
     If you want to change your system so that you can now work with half-periods, you have to use depreciation keys with time-dependent period control in that company code.
    If you need to make general changes to the number of periods for calculating depreciation per fiscal year, you will have to consult your system administrator.
We were not getting this error in R3 enterprise. We have tried implementing sap note 1009699 but it does not resolve the issue. What we observed is, AA662 occurs if you change the number of period in the fiscal year version or the use of half-periods, after you have already posted to assets. The most common cause is a different value in field ANLB-PERFY which is the number of periods in the fiscal year. If the number entered here does not correspond to the number of posting periods of the fiscal year used, the system raises error AA662 (except for none posted areas for which ANLB-PERFY = 000 or areas with depreciation to the date for which ANLB-PERFY = 365). For us there are many assets with ANLB-PERFY=24.
Is there a way to fix this problem by some config change or data fix. If any of you have come across a similar issue or have any insights on the same, please respond back.
Regards,
Milan
([email protected])

Hi All,
I could not find any solution to fix this in new depreciation calculation method. I also did not get any help from SAP or SDN. So, we decided to switch back to the old calculation method.
There are 3 ways of implementing the old calculation.
1. SAP Note 984161 : Code change at ABAP level.
2. User Level : By setting the user parameter FAA_DC_SWITCH to OLD
3. By default Config : If we make an entry in V_TABWD_VID in SM30 and create a new entry with Acct. Transaction ID to 'AMBUAFAR000000000000', It should use old calculation method.
Thanks,
Milan
+1-310-691-3978
+91-994-571-5063

Upgrading SAP ECC 6.0 NW 7.0 (ABAP) to SAP ECC 6.0 NW 7.4 (ABAP + JAVA)

Good Afternoon Gentlemen,
I need your help understanding what's involved on a upgrade we need to perform.
Right now we have a SAP ECC 6.0 with the following components:
SAP_BASIS       701                 0012    SAPKB70112
SAP_ABA          701                 0012    SAPKA70112
PI_BASIS           701                 0012    SAPK-70112INPIBASIS
ST-PI                  2008_1_700    0004    SAPKITLRD4
SAP_BS_FND    701                 0012    SAPK-70112INSAPBSFND
SAP_BW           701                 0012    SAPKW70112
SAP_AP            700                 0028    SAPKNA7028
WEBCUIF          700                 0012    SAPK-70012INWEBCUIF
SAP_APPL        604                 0012    SAPKH60412
SAP_HR            600                 0090    SAPKE60090
ST-A/PI              01N_700ECC   0000
All other components are 600 or 604.
My functional team agreed with the client a upgrade for components 7.4 in order to install SAP BPC.
In my understanding, the current version is a ECC 6.0 on a NW 7.0 EHP1 (ABAP) and since we're being asked to upgrade to components 7.4, we're going to upgrade to ECC 6.0 on a NW 7.4 (we can choose the EHP freely). Is this correct?
Can you also point me the direction for the right documentation in order to do this the smoother way possible?
I thank you all in advance.
Best Regards,
Pedro Gaspar

Hi,
This is SAP Business one system admin forum. Please find correct forum and repost your discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

Distribution rule creation is not possible in CJIC after upgradation of ecc

We are using settlements for PS in ECC 6.0. Trying to partial settlement for WBS from CJ70 tcode, unable to find Final Settlement button/ icon where we give amount for settlement after some service patch upgrade .Can any one pls suggest any alternative /solution for this. Even it is same with T-Code CJIC too. your information we have undergone upgradation from 4.7 to ecc 6.0.we can be able to run these transactions in 4.7.I know this can be done through CJ88.But due some specific reasons i want to run these t-codes.(CJ70 & CJIC)
Thanks in advance.
regards
Thanna

No in addition to display ,you can maintain settlement rule also. In cj88 we are not able to settle by amount.so will maintain settlement rule by amount in cj70 & we will do settlement by cj88.this we did it in 4.7 version but after upgradation we could nt do it.
thanks for your reply.
regards
hari

After upgrade Sap ECC to ehp4

Similar Messages

Maybe you are looking for