After upgrade System Apache can't start

Hi i work with php5, apache (default) and mysql on my MacBook Pro...
This weekend i have installed the last upgrade of system, but now my server apache don't start..
If i try to start/stop/restart apache from terminal i get this error:
cbmac:~ cbmac$ apachectl start
launchctl: CFURLWriteDataAndPropertiesToResource(/System/Library/LaunchDaemons/org.apache. httpd.plist) failed: -10
org.apache.httpd: Already loaded
cbmac:~ cbmac$ apachectl restart
launchctl: CFURLWriteDataAndPropertiesToResource(/System/Library/LaunchDaemons/org.apache. httpd.plist) failed: -10
cbmac:~ cbmac$ apachectl stop
launchctl: CFURLWriteDataAndPropertiesToResource(/System/Library/LaunchDaemons/org.apache. httpd.plist) failed: -10
the content of the file org.apache.httpd.plist is :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>org.apache.httpd</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/httpd</string>
<string>-D</string>
<string>FOREGROUND</string>
</array>
<key>SHAuthorizationRight</key>
<string>system.preferences</string>
</dict>
</plist>
I have already repaired the files permissions with Disk Utility, but without resolving the problem.
I don't know what to do, someone have idea?
Thanks in advance
Manza

I also have the same error:
http://discussions.apple.com/thread.jspa?messageID=9125362&#9125362
But may have found a solution here in this thread ( Comment by 'parndt' ):
http://discussions.apple.com/thread.jspa?messageID=8689266&#8689266
I havnt tried it yet, As I spent half of yesterday, formatting, then trying to compile Apache, php, mysql, openssl on on a seperate partition, but changing the Apache LAYOUT config, yet the mac wouldn't listen to my changes and kept trying to use the original broken version.
I am formatting now, and going to try on a clean install, so will let you know.
This is a good reference site:
http://diymacserver.com/

Similar Messages

Facetime will not work after upgrade to io6 can anybody advise?

Facetime will not connect after upgrade to IO6 can anyone advise?

Hey there,
Maybe start here
[Troubleshooting Automatic Software Update in Mac OS X|http://support.apple.com/kb/HT1569].
Otherwise, try deleting this file. com.apple.SoftwareUpdate.plist located at /Users/YourName/Library/Preferences. Drag that .plist file from the Preferences folder to the Trash, empty the Trash and restart your Mac.
Have you tried resetting your widgets by hitting Command-R? If that doesn't, work trying trashing the two dashboard preference files.
The two dashboard preference files are in the following directory:
yourusername -> Library -> Preferences ->
The file names are:
com.apple.dashboard.client.plist
com.apple.dashboard.plist
Hope this helps.
B-rock

After upgrading to Lion can't get Boot Camp to work! Just get "startup dusk cannot be portioned or restored to a single partition"?

After upgrading to Lion can't get Boot Camp to work! Just get "The startup disk cannot be partitioned or restored to a single partition". Anytone?

This message, and threads like yours got asked daily for over two years, now it is only a couple times a week!!
Is it so hard to follow through? you were to have backup already, clones are best, then erase/format and restore.
Then partition.
Some have been able to use Disk Utility booted from OS X DVD or another drive, and repair the drive.
You have to use Boot Camp Assistant (99.9% anyway) to create and achieve a proper Windows Master Boot Record partition.

I can't access my i tunes, getting message-System error-can't start because MSVCR80.dll is missing, also i tunes was not installed correctly-error 7(Windows error126)-What do i do to get into my itunes library?

Can someone please help me to get to my i Tunes library? I am getting the following message when trying to access i Tunes=i Tunes. exe-System error-can't start because MSVCR 80.dll is missing-Try reinstalling program. Also i Tunes was not installed correctly-Please reinstall i Tunes.-Error7(Windows error 126).

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

After upgrading E71 I can not reinstall the progra...

After upgrading E71 I can not reinstall the programmers I had before on memory card while I m able to install them if I choose phone memory
but for any new program which was not installed before the software upgrade I can install them in the memory card or phone memory without any problem
is there any advice?
Thank you

do the serach on the internet for all the applications that you want to install and are unable to do, get fresh copies of those files downloaded and try to download the new, fresh file applications to your phone this should work for you.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

After update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

after update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)

Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)
Are others having the same problems?

Try this. Worked for me.
- turn off your router
- turn off you Mac's after removing all available printers
- turn off all iDevices
- do a factory reset of your printer remove all cables min. 30 sec.
- turn on your router first
- ran the network set up wizard
- give your printer also a new name like "DeskJet 2015"
Something which you don't have used before.
- turn on your Mac's and add your printer
- turn on your iDevices at least.
Should work after these steps.
It worked for me including all iDevices.
iOS and Yosemite

[SLOVED] All my USB not work after upgrade system.

Hello all,
I'm new in Arch, and i install my system with your LiveCD (2005).
In the first boot, all work good. But after upgrade (pacman -Syu), all my USB device (Keyboard, Mouse) not work.
I'm not using (yet) with Xorg, just in command shell (tty1), But i can't press anything cuz my keyboard not work.
I try to do that (https://bbs.archlinux.org/viewtopic.php … 19#p906119), but no work to me too.
What i can to do to fix this?
My dmesg:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010
Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf564000 (usable)
BIOS-e820: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
BIOS-e820: 00000000bf5bb000 - 00000000bf5db000 (reserved)
BIOS-e820: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
BIOS-e820: 00000000bf5ec000 - 00000000bf600000 (reserved)
BIOS-e820: 00000000bf600000 - 00000000bf602000 (usable)
BIOS-e820: 00000000bf602000 - 00000000bf603000 (ACPI data)
BIOS-e820: 00000000bf603000 - 00000000bf60b000 (reserved)
BIOS-e820: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
BIOS-e820: 00000000bf615000 - 00000000bf63e000 (reserved)
BIOS-e820: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
BIOS-e820: 00000000bf681000 - 00000000bf800000 (usable)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000023f800000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
No AGP bridge found
last_pfn = 0x23f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 23F800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009ec00 (usable)
modified: 000000000009ec00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bf564000 (usable)
modified: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
modified: 00000000bf5bb000 - 00000000bf5db000 (reserved)
modified: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
modified: 00000000bf5ec000 - 00000000bf600000 (reserved)
modified: 00000000bf600000 - 00000000bf602000 (usable)
modified: 00000000bf602000 - 00000000bf603000 (ACPI data)
modified: 00000000bf603000 - 00000000bf60b000 (reserved)
modified: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
modified: 00000000bf615000 - 00000000bf63e000 (reserved)
modified: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
modified: 00000000bf681000 - 00000000bf800000 (usable)
modified: 00000000fed1c000 - 00000000fed20000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 000000023f800000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fcda0] fcda0
init_memory_mapping: 0000000000000000-00000000bf800000
0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 16000-1a000
init_memory_mapping: 0000000100000000-000000023f800000
0100000000 - 023f800000 page 2M
kernel direct mapping tables up to 23f800000 @ 18000-22000
RAMDISK: 37c44000 - 37e19ab8
ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
ACPI: XSDT 00000000bf5ae068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bf5b7ba0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bf5ae140 09A5C (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bf60cf80 00040
ACPI: APIC 00000000bf5b7c98 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000bf5b7d10 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000bf5b7e18 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000bf5b7e58 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
(13 early reservations) ==> bootmem [0000000000 - 023f800000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 00016d7b38] TEXT DATA BSS ==> [0001000000 - 00016d7b38]
#2 [0037c44000 - 0037e19ab8] RAMDISK ==> [0037c44000 - 0037e19ab8]
#3 [00016d8000 - 00016d826b] BRK ==> [00016d8000 - 00016d826b]
#4 [00000fcdb0 - 0000100000] BIOS reserved ==> [00000fcdb0 - 0000100000]
#5 [00000fcda0 - 00000fcdb0] MP-table mpf ==> [00000fcda0 - 00000fcdb0]
#6 [000009ec00 - 00000fca90] BIOS reserved ==> [000009ec00 - 00000fca90]
#7 [00000fcd24 - 00000fcda0] BIOS reserved ==> [00000fcd24 - 00000fcda0]
#8 [00000fca90 - 00000fcd24] MP-table mpc ==> [00000fca90 - 00000fcd24]
#9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
#10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
#11 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000]
#12 [0000018000 - 000001d000] PGTABLE ==> [0000018000 - 000001d000]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0023f800
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000bf564
0: 0x000bf600 -> 0x000bf602
0: 0x000bf681 -> 0x000bf800
0: 0x00100000 -> 0x0023f800
On node 0 totalpages: 2092659
DMA zone: 56 pages used for memmap
DMA zone: 110 pages reserved
DMA zone: 3816 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765725 pages, LIFO batch:31
Normal zone: 17892 pages used for memmap
Normal zone: 1290780 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf564000 - 00000000bf5bb000
PM: Registered nosave memory: 00000000bf5bb000 - 00000000bf5db000
PM: Registered nosave memory: 00000000bf5db000 - 00000000bf5ec000
PM: Registered nosave memory: 00000000bf5ec000 - 00000000bf600000
PM: Registered nosave memory: 00000000bf602000 - 00000000bf603000
PM: Registered nosave memory: 00000000bf603000 - 00000000bf60b000
PM: Registered nosave memory: 00000000bf60b000 - 00000000bf615000
PM: Registered nosave memory: 00000000bf615000 - 00000000bf63e000
PM: Registered nosave memory: 00000000bf63e000 - 00000000bf681000
PM: Registered nosave memory: 00000000bf800000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880008a00000 s89176 r8192 d21416 u524288
pcpu-alloc: s89176 r8192 d21416 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060321
Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8167004k/9428992k available (3449k kernel code, 1058356k absent, 202696k reserved, 1818k data, 484k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:768
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3311.105 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.13 BogoMIPS (lpj=11037016)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
Booting Node 0, Processors #1
CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
#2
CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
#3 Ok.
CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
Brought up 4 CPUs
Total of 4 processors activated (26499.22 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20091214/nsinit-340)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xfe707000-0xfe70700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xfe706000-0xfe7063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xfe705000-0xfe7053ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: reg 10: [mem 0xfe704000-0xfe7040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 24: [io 0xf020-0xf02f]
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe620000-0xfe63ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe600000-0xfe61ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xfe640000-0xfe643fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: reg 10: [io 0xd040-0xd047]
pci 0000:03:00.0: reg 14: [io 0xd030-0xd033]
pci 0000:03:00.0: reg 18: [io 0xd020-0xd027]
pci 0000:03:00.0: reg 1c: [io 0xd010-0xd013]
pci 0000:03:00.0: reg 20: [io 0xd000-0xd00f]
pci 0000:03:00.0: reg 30: [mem 0xfe500000-0xfe50ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:05:00.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:0b: [io 0x0400-0x0453] has been reserved
system 00:0b: [io 0x0458-0x047f] has been reserved
system 00:0b: [io 0x0500-0x057f] has been reserved
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [io 0x0454-0x0457] has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io disabled]
pci 0000:00:1c.5: bridge window [mem disabled]
pci 0000:00:1c.5: bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem disabled]
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [io disabled]
pci 0000:06:00.0: bridge window [mem disabled]
pci 0000:06:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 06-07]
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [mem disabled]
pci 0000:00:1c.7: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:06:00.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:06: resource 3 [io 0x0000-0xffff]
pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:07: resource 6 [io 0x0000-0xffff]
pci_bus 0000:07: resource 7 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1878k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000979e000 - ffff88000d79e000
software IO TLB at phys 0x979e000 - 0xd79e000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1304838033.699:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15956
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 28 for MSI/MSI-X
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 484k freed
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 20
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 20
ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 20
pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:03:00.0: setting latency timer to 64
pata_acpi 0000:03:00.0: PCI INT A disabled
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-6: WDC WD1200JD-00GBB0, 02.05D02, max UDMA/100
ata1.01: 234441648 sectors, multi 16: LBA48
ata1.01: applying bridge limits
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA WDC WD1200JD-00G 02.0 PQ: 0 ANSI: 5
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max MWDMA2
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.00: limiting SATA link speed to 1.5 Gbps
ata2.00: limiting speed to MWDMA2:PIO3
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.00: disabled
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2: EH complete
pata_via 0000:03:00.0: version 0.3.4
pata_via 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_via 0000:03:00.0: setting latency timer to 64
scsi4 : pata_via
scsi5 : pata_via
ata5: PATA max UDMA/133 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 16
ata6: PATA max UDMA/133 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 16
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:1:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb2 sdb3 sdb4 < sdb5 >
sda: sda1 sda2
sd 0:0:1:0: [sdb] Attached SCSI disk
sda3
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sdb5): mounted filesystem with ordered data mode
<30>udev[901]: starting version 167
Adding 7030776k swap on /dev/sdb2. Priority:-1 extents:1 across:7030776k
Thanks a lots.
Last edited by KingYes (2011-05-08 11:03:55)

FYI, the latest installation CD version is "2010.05". It's best to use the latest. Get it from http://www.archlinux.org/download/
I'm not sure but I believe all other LiveCDs are custom made outside of the official Archlinux development team.
I recommend downloading the CD I mentioned and follow this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide
I've installed arch many times on different hardware and the only time I lost mouse and keyboard was after I removed "10-evdev.conf" and "10-quirks.conf" from /etc/X11/xorg.conf.d/. I copied both back from backups, rebooted and m&k were functional again. My guess is "10-evdev.conf" was the file I needed. Check both these files exist.

How to register Final Cut Studio after upgrading system?

After upgrading my system and changing to a new G5 Final Cut Studio lost Registering Info.
Always after around 5 times booting Final Cut I have a dialog box, that I have to register.
But the "Register Now" button is not aktive!
What to do?
G5 2x2 GB 1,5 GB RAM Mac OS X (10.4.7)
G5 2x2 GB 1,5 GB RAM Mac OS X (10.4.5)

Make sure you have filled out all the fields
If I remember right, there is one field that is left blank (can not remember which one). Fill that one in, and the register button should become active.

After upgrading iTunes I can no longer play my songs. It says that "The song ________ could not be used because the original file could not be found. Would you like to locate it?" I have NO clue where to look.

After I recently Upgraded iTunes I can no longer play any movies or songs. It says that "The song ______ can no longer be playe because the original file cannot be found. Would you like to locate it?" I have no clue where to look as I'm not tech savvy. I did look in previous itunes libraries file and it's empty. Any and all help is appreciated.

The links below illustrate how your iTunes should look if you use default settings in preferences. If you don't use those settings then you have to know what you're doing.
Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/message/13025536 and https://discussions.apple.com/message/17457605
The above links also illustrate the Media folder and its subfolders. Look for a file in there in the logical structure by folder artist and album. If you're lucky, linking one file will get an offer to link others and it iwll all come together again.
I see you are running OSX 10.5.8 it would help to know which version of iTunes you use now and which one you used before.

After upgrading to ios7 can't play an audiobook with the music app.

After upgrading to ios7 I have been unable to play an audiobook from the Music app. I am also not getting a clean sych. The ipad goes through the sych steps through step 8, but just continues to sit waiting to apply changes.Any idea as to what the problem might be? Can I reload ios7?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

After upgrade to Apache 2.4, Invalid Mutex directory in argument file:

I've just upgraded to Apache 2.4, and when I try to restart Apache (using systemctl), I get the following error:
AH00526: Syntax error on line 21 of /etc/httpd/conf/extra/httpd-mpm.conf:
Invalid Mutex directory in argument file:${APACHE_LOCK_DIR}
Originally, the line read
LockFile "/var/log/httpd/accept.lock"
and I was getting an error on the invalid command. A search suggested
Mutex file:${APACHE_LOCK_DIR} default
which is how the line reads currently.
So what is that line supposed to read? Or does it read correctly and there is another problem?
Doug

Hi,
Based on your stack you are using the form of XmlContainer::deleteDocument() that does not take an XmlTransaction, which means it will automatically create one for you (assuming a transactional container, which is also the case here). That transaction is most likely hanging against another transaction that you probably have not yet committed in your current thread. That's my best guess anyway. This sort of issue could have been a latent bug that did not cause problems under 2.2.
Regards,
George

After Upgrade, Windows Service will not start automaticly

I just upgraded from 10.2 to 10.4. When I did the Windows File Service, will not start automaticly. I can start it manually, after a reboot. Any idea on how to fix this?

I am having the same problem on a clean install of Server 10.4.10, AFP & Web starts automatically on restart, but not Windows Service. This is the first time I have run into this, it starts fine on all other servers I administer. Then entry in /etc/hostconfig for SMBSERVER is set to "-YES-", there is no errors or messages of any kind in the console or system log, it just won't start.
This complicated with the problem I am having on the same server where I cannot connect via ARD after reboot without someone there physically plugging a monitor into the video port first (another open post I have - http://discussions.apple.com/message.jspa?messageID=5850246#5850246 ). So, doing maintenance at off-hours is almost unworkable.

[SOLVED]After a logout/in , can't start conky as user.

I logged out of my xfce session. Logged back in and conky did not start.
I now get this error:
xxx@xxx~]$ conky -c ~/AccuW_2/accuw.Toronto.conky
[1] 1442
bash: -c: command not found
[xxx@xxx ~]$ conky: no process found
No changes at all were made to the computer. No software was uninstalled/reinstalled.
Here is my conky config that I've been using for months:
## killall conky && conky -c ~/AccuW_2/accuw.Toronto.conky &
# 1e_Accuweather_USA_Images script by TeoBigusGeekus
# http://crunchbanglinux.org/forums/post/212605/
### Begin Window Settings ##################################################
# Create own window instead of using desktop (required in nautilus)
own_window yes
# Use the Xdbe extension? (eliminates flicker)
# It is highly recommended to use own window with this one
# so double buffer won't be so big.
double_buffer yes
own_window_type normal #override
own_window_transparent yes
#own_window_hints undecorated,below,skip_taskbar,skip_pager
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_colour black
own_window_class Conky
own_window_title tedbell
### ARGB can be used for real transparency
### NOTE that a composite manager is required for real transparency.
### This option will not work as desired (in most cases) in conjunction with
### own_window_type override
# own_window_argb_visual yes
### When ARGB visuals are enabled, this use this to modify the alpha value
### Use: own_window_type normal
### Use: own_window_transparent no
### Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.
#own_window_argb_value 150
#minimum_size 310 0 ## width, height
maximum_width 310 ## width, usually a good idea to equal minimum width
gap_x 10 ### left &right
gap_y 10 ### up & down
alignment top_right
#################################################### End Window Settings ###
### Font Settings ##########################################################
# Use Xft (anti-aliased font and stuff)
use_xft yes
xftfont MonoCondensed:bold:size=10
# Alpha of Xft font. Must be a value at or between 1 and 0 ###
xftalpha 1
# Force UTF8? requires XFT ###
override_utf8_locale yes
draw_shades yes #no #### <<<--- To see it easier on light screens.
default_shade_color black
draw_outline yes #no #### <<<--- Amplifies text if yes
default_outline_color black
uppercase no
###################################################### End Font Settings ###
### Color Settings #########################################################
default_shade_color gray
default_outline_color black
default_color DCDCDC #Gainsboro
color0 ffe595 #Teo Gold
color1 778899 #LightSlateGrey
color2 FF8C00 #Darkorange
color3 7FFF00 #Chartreuse
color4 FFA07A #LightSalmon
color5 000000 #NavajoWhite
color6 00BFFF #DeepSkyBlue
color7 00FFFF #Cyan #48D1CC #MediumTurquoise
color8 FFFF00 #Yellow
color9 FF0000 #Red #A52A2A #DarkRed
##################################################### End Color Settings ###
### Borders Section ########################################################
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_inner_margin 5
border_outer_margin 0
# border width
border_width 0
# graph borders
draw_graph_borders no
##################################################### End Borders Secton ###
### Miscellaneous Section ##################################################
# Boolean value, if true, Conky will be forked to background when started.
background no
# Adds spaces around certain objects to stop them from moving other things
# around, this only helps if you are using a mono font
# Options: right, left or none
use_spacer right
# Default and Minimum size is 256 - needs more for single commands that
# "call" a lot of text IE: bash scripts
text_buffer_size 256
# Subtract (file system) buffers from used memory?
no_buffers yes
# change GiB to G and MiB to M
short_units yes
# Like it says, ot pads the decimals on % values
# doesn't seem to work since v1.7.1
pad_percents 2
# Maximum size of user text buffer, i.e. layout below TEXT line in config file
# (default is 16384 bytes)
# max_user_text 16384
############################################## End Miscellaneous Section ###
### LUA Settings ###########################################################
## Above and After TEXT - requires a composite manager or blinks.
# lua_load ~/Conky/LUA/draw-bg.lua
#TEXT
#${lua conky_draw_bg 10 0 0 0 0 0x000000 0.6}
## ${lua conky_draw_bg corner_radius x_position y_position width height color alpha}
## OR Both above TEXT (No composite manager required - no blinking!)
lua_load ~/Conky/LUA/draw-bg.lua
lua_draw_hook_pre draw_bg 5 0 0 0 0 0x000000 0.0
####################################################### End LUA Settings ###
# The all important - How often conky refreshes.
# If you have a "Crey" try: 0.2 - smokin' - but watch the CPU useage go UP!
update_interval 1
## ${image ~/Conky/images/red_1.png -p 0,15 -s 67x40}
## ${image ~/Conky/images/red_1.png -p 165,52 -s 125x75}
## $HOME/AccuW_2/Toronto/acc_int_images
default_bar_size 100 12
# stuff after 'TEXT' will be formatted on screen
TEXT
${color0}${time %A %d %b %Y} ${color1}--${color0} Scarborough, ON ${color1}--${color0} ${time %T}${color}\
${texeci 500 bash $HOME/AccuW_2/Toronto/acc_int_images}\
${image $HOME/AccuW_2/Toronto/cc.png -p 220,25 -s 67x40}
${execpi 600 sed -n '1p' $HOME/AccuW_2/Toronto/messages}
${font Instruction:size=20} Now ${execpi 600 sed -n '29p' $HOME/AccuW_2/Toronto/curr_cond}${goto 120} FL ${execpi 600 sed -n '30p' $HOME/AccuW_2/Toronto/curr_cond}${font}
${color0}Wind: ${color}${execpi 600 sed -n '31p' $HOME/AccuW_2/Toronto/curr_cond} ${execpi 600 sed -n '32p' $HOME/AccuW_2/Toronto/curr_cond}\
${color0}Today Tonight${color}
${color0}Hum: ${color}${execpi 600 sed -n '33p' $HOME/AccuW_2/Toronto/curr_cond}\
${font Toronto Subway:size=14}${goto 170}${color6}${execpi 600 sed -n '26p' $HOME/AccuW_2/Toronto/first_days}${color}\
${goto 210}${color9}${execpi 600 sed -n '27p' $HOME/AccuW_2/Toronto/first_days}${color}\
${goto 245}${color6}${execpi 600 sed -n '32p' $HOME/AccuW_2/Toronto/first_days}${color}\
${goto 290}${color9}${execpi 600 sed -n '31p' $HOME/AccuW_2/Toronto/first_days}${color} ${font}
${color0}Bar: ${color}${execpi 600 sed -n '34p' $HOME/AccuW_2/Toronto/curr_cond}\
${image $HOME/AccuW_2/Toronto/tod.png -p 160,100 -s 67x40}\
${image $HOME/AccuW_2/Toronto/ton.png -p 235,100 -s 67x40}
${color0}Cloud: ${color}${execpi 600 sed -n '35p' $HOME/AccuW_2/Toronto/curr_cond}
${color0}UVI: ${color}${execpi 600 sed -n '36p' $HOME/AccuW_2/Toronto/curr_cond}
${color0}Vis: ${color}${execpi 600 sed -n '38p' $HOME/AccuW_2/Toronto/curr_cond}
${color0}DP: ${color}${execpi 600 sed -n '37p' $HOME/AccuW_2/Toronto/curr_cond}°
${color0}Sunrise: ${color}${execpi 600 sed -n '39p' $HOME/AccuW_2/Toronto/curr_cond}\
${goto 160}${color0} Sunset: ${color}${execpi 600 sed -n '40p' $HOME/AccuW_2/Toronto/curr_cond}
${color0}Moonrise: ${color}${execpi 600 sed -n '41p' $HOME/AccuW_2/Toronto/curr_cond}\
${goto 160}${color0}Moonset: ${color}${execpi 600 sed -n '42p' $HOME/AccuW_2/Toronto/curr_cond}
${color0}9 DAY FORECAST ${color1}${hr}${color}
${color1}${execpi 600 sed -n '5p' $HOME/AccuW_2/Toronto/first_days}\
${execpi 600 sed -n '10p' $HOME/AccuW_2/Toronto/first_days}\
${execpi 600 sed -n '15p' $HOME/AccuW_2/Toronto/first_days}${color}\
${image $HOME/AccuW_2/Toronto/6.png -p 5,232 -s 67x40}\
${image $HOME/AccuW_2/Toronto/11.png -p 120,232 -s 67x40}\
${image $HOME/AccuW_2/Toronto/16.png -p 220,232 -s 67x40}
${font Toronto Subway:size=11}
${color6}${execpi 600 sed -n '8p' $HOME/AccuW_2/Toronto/first_days}°\
${color6}${goto 180}${execpi 600 sed -n '13p' $HOME/AccuW_2/Toronto/first_days}°\
${color6}${goto 283}${execpi 600 sed -n '18p' $HOME/AccuW_2/Toronto/first_days}°
${color9}${execpi 600 sed -n '9p' $HOME/AccuW_2/Toronto/first_days}°\
${color9}${goto 180}${execpi 600 sed -n '14p' $HOME/AccuW_2/Toronto/first_days}°\
${color9}${goto 283}${execpi 600 sed -n '19p' $HOME/AccuW_2/Toronto/first_days}° ${font}${color}
${color1} ${execpi 600 sed -n '20p' $HOME/AccuW_2/Toronto/first_days}\
${execpi 600 sed -n '1p' $HOME/AccuW_2/Toronto/last_days}\
${execpi 600 sed -n '6p' $HOME/AccuW_2/Toronto/last_days}${color}\
${image $HOME/AccuW_2/Toronto/21.png -p 5,310 -s 67x40}\
${image $HOME/AccuW_2/Toronto/last_2.png -p 120,310 -s 67x40}\
${image $HOME/AccuW_2/Toronto/last_7.png -p 223,310 -s 67x40}
${font Toronto Subway:size=11}
${color6}${execpi 600 sed -n '23p' $HOME/AccuW_2/Toronto/first_days}°\
${color6}${goto 180}${execpi 600 sed -n '4p' $HOME/AccuW_2/Toronto/last_days}°\
${color6}${goto 283}${execpi 600 sed -n '9p' $HOME/AccuW_2/Toronto/last_days}°
${color9}${execpi 600 sed -n '24p' $HOME/AccuW_2/Toronto/first_days}°\
${color9}${goto 180}${execpi 600 sed -n '5p' $HOME/AccuW_2/Toronto/last_days}°\
${color9}${goto 283}${execpi 600 sed -n '10p' $HOME/AccuW_2/Toronto/last_days}° ${font}
${color1} ${execpi 600 sed -n '11p' $HOME/AccuW_2/Toronto/last_days}\
${execpi 600 sed -n '16p' $HOME/AccuW_2/Toronto/last_days}\
${execpi 600 sed -n '21p' $HOME/AccuW_2/Toronto/last_days}${color}\
${image $HOME/AccuW_2/Toronto/last_12.png -p 5,385 -s 67x40}\
${image $HOME/AccuW_2/Toronto/last_17.png -p 120,385 -s 67x40}\
${image $HOME/AccuW_2/Toronto/last_22.png -p 225,385 -s 67x40}
${font Toronto Subway:size=11}
${color6}${execpi 600 sed -n '14p' $HOME/AccuW_2/Toronto/last_days}°\
${color6}${goto 180}${execpi 600 sed -n '19p' $HOME/AccuW_2/Toronto/last_days}°\
${color6}${goto 283}${execpi 600 sed -n '24p' $HOME/AccuW_2/Toronto/last_days}°
${color9}${execpi 600 sed -n '15p' $HOME/AccuW_2/Toronto/last_days}°\
${color9}${goto 180}${execpi 600 sed -n '20p' $HOME/AccuW_2/Toronto/last_days}°\
${color9}${goto 283}${execpi 600 sed -n '25p' $HOME/AccuW_2/Toronto/last_days}° ${font}
${color0}COMPUTER ${color1}${hr}${color}
${font Instruction:size=7.5}
${color1}CPU0:${goto 70}${color7}${cpubar cpu0}${goto 70}${color1}${cpubar cpu4}${goto 80}${color5}${cpu cpu0}%${color}${goto 190}${color7}${execi 8 sensors | grep 'Core 0:' | cut -c16-17}°
${color1}CPU1:${goto 70}${color6}${cpubar cpu1}${goto 70}${color1}${cpubar cpu4}${goto 80}${color5}${cpu cpu1}%${color}${goto 190}${color6}${execi 8 sensors | grep 'Core 1:' | cut -c16-17}°
${color1}RAM:${goto 70}${color4}${membar}${goto 70}${color1}${cpubar cpu4}${goto 80}${color5}${memperc}%${color4}${goto 190}$mem/$memmax${font}
${color0}DISK ${color1}${hr}${color}
${color1}sda: ${color9}Write: ${diskio_write /dev/sda} ${color3}Read: ${diskio_read /dev/sda} ${color8}Temp: ${color8}${execpi 15 hddtemp -n /dev/sda} °
${font Instruction:size=7.5}
${color1}/:${goto 70}${color2}${fs_bar /}${goto 70}${color1}${cpubar cpu4}${goto 80}${color5}${fs_used_perc /} %${color2}\
${goto 190}${fs_used /}/${fs_size /}
${color1}/home:${goto 70}${color8}${fs_bar /home}${goto 70}${color1}${cpubar cpu4}${goto 80}${color5}${fs_used_perc /home} %${color8}\
${goto 190}${fs_used /home}/${fs_size /home}
${color1}../sda3:${goto 70}${color0}${fs_bar /media/sda3}${goto 70}${color1}${cpubar cpu4}${goto 80}${color5}${fs_used_perc /media/sda3} %${color0}\
${goto 190}${fs_used /media/sda3}/${fs_size /media/sda3}${font}
${color0}NETWORK ${color1}${hr}${color}
${color1}wlan0: ${color9}Down: ${downspeedf wlan0}${color3}Up: ${upspeedf wlan0}
${color8}RX${goto 110}${color8}TX${goto 200}${color8}Total
${color0}Today:${color}
${color} ${execi 300 vnstat -i wlan0 | grep "today" | awk '{print $2 $3}'}\
${color}${goto 110}${execi 300 vnstat -i wlan0 | grep "today" | awk '{print $5 $6}'}\
${color}${goto 200}${execi 300 vnstat -i wlan0 | grep "today" | awk '{print $8 $9}'}${color}
${color0}Yesterday:${color}
${color} ${execi 300 vnstat -i wlan0 | grep "yesterday" | awk '{print $2 $3}'}\
${color}${goto 110}${execi 300 vnstat -i wlan0 | grep "yesterday" | awk '{print $5 $6}'}\
${color}${goto 200}${execi 300 vnstat -i wlan0 | grep "yesterday" | awk '{print $8 $9}'}${color}
${color0}Last Week:${color}
${color} ${execi 300 vnstat -w -i wlan0 | grep "current week" | awk '{print $3 $4}'}\
${color}${goto 110}${execi 300 vnstat -w -i wlan0 | grep "current week" | awk '{print $6 $7}'}\
${color}${goto 200}${execi 300 vnstat -w -i wlan0 | grep "current week" | awk '{print $9 $10}'}${color}
${color0}${time %B}:${color}
${color} ${execi 300 vnstat -m -i wlan0 | grep "`date +"%b '%y"`" | awk '{print $3 $4}'}\
${color}${goto 110}${execi 300 vnstat -m -i wlan0 | grep "`date +"%b '%y"`" | awk '{print $6 $7}'}\
${color}${goto 200}${execi 300 vnstat -m -i wlan0 | grep "`date +"%b '%y"`" | awk '{print $9 $10}'} ${color}
Can anyone tell me how to get it to be able to run as user again. I've traced the problem down to that.
Thanks,
Last edited by tedbell (2012-08-14 11:22:09)

DSpider wrote:
tedbell wrote:
P.s. In never needed the '&' to run this. If it matters, I edited my bash rc to alias the command to just 'conky'
alias conky='killall conky && conky -c ~/AccuW_2/accuw.Toronto.conky &'
Ok, there's your problem. When you're running "$ conky -c ~/AccuW_2/accuw.Toronto.conky", you're effectively running:
$ <insert 'conky' alias here> -c ~/AccuW_2/accuw.Toronto.conky
Or in other words:
$ killall conky && conky -c ~/AccuW_2/accuw.Toronto.conky & -c ~/AccuW_2/accuw.Toronto.conky
Heh. Told you this belongs in the newbie section.
There's an "-c ~/AccuW_2/accuw.Toronto.conky" appendage at the end that Bash doesn't know how to interpret.
I guess I never noticed the problem because conky always autostarted. I deleted the line and restarted and everything works now. Thanks!
Mods. move this to newbie or better yet delete it, it's embarassing.

After upgrade System fail to boot

Hi,
few days ago I did the system upgrade and after reboot i get several errors and the system doesn't boot, the first one in the list is:
FATAL could not load "/lib/modules/3.0-ARCH/modules.dep" no such file or directory
I think the problem is that in my /lib/modules/ dir there is no /3.0-ARCH dir but there is the 3.1.4.1-ARCH and the 3.1 extramodules.
why that? Is this problem coming from the upgrade?
also the network is not recognized
and the RAID disks are not mounted
the only thing I found on internet is this article:
https://bbs.archlinux.org/viewtopic.php?id=129970
but I cannot downgrade because the pkg dir is empty and I cannot connect to internet for get it
can you please help me?
thanks

I found something maybe useful...
in the dmesg I found that the boot disk is loaded as sdc but, I'm sure it was sda before the upgrade.
in the menu.lst there is
- title Arch lunix [/boot/vmlinuz.linux]
- root (hd0,0)
- kernel /vmlinuz-linuz root=/dev/sda3 ro
- initrd /initramfs-linux.img
do you think that changing something in this I can have back my boot partition?

After upgrade System Apache can't start

Similar Messages

Maybe you are looking for