After upgrade System fail to boot

Hi,
few days ago I did the system upgrade and after reboot i get several errors and the system doesn't boot, the first one in the list is:
FATAL could not load "/lib/modules/3.0-ARCH/modules.dep" no such file or directory
I think the problem is that in my /lib/modules/ dir there is no /3.0-ARCH dir but there is the 3.1.4.1-ARCH and the 3.1 extramodules.
why that? Is this problem coming from the upgrade?
also the network is not recognized
and the RAID disks are not mounted
the only thing I found on internet is this article:
https://bbs.archlinux.org/viewtopic.php?id=129970
but I cannot downgrade because the pkg dir is empty and I cannot connect to internet for get it
can you please help me?
thanks

I found something maybe useful...
in the dmesg I found that the boot disk is loaded as sdc but, I'm sure it was sda before the upgrade.
in the menu.lst there is
- title Arch lunix [/boot/vmlinuz.linux]
- root (hd0,0)
- kernel /vmlinuz-linuz root=/dev/sda3 ro
- initrd /initramfs-linux.img
do you think that changing something in this I can have back my boot partition?

Similar Messages

After upgrade system no longer boots, and (apparently) no USB

So I've got Arch installed on my mom's computer. Apparently she did an update and now this: http://imgur.com/AQBZLQV
ERROR: Unable to find root device 'PARTUUID<stuff>'
It drops to a shell, but the shell doesn't work. Possibly because it's a USB keyboard? The keyboard works in the BIOS just fine, but when it hits that screen - nada.
Of course, she's not *that* savvy, so I don't think she paid any attention to what exactly was updating. So far the only information I've got from her is that she updated, restarted, and death.
I'm assuming it'd be possible to get back in there and rescue it with a disk - maybe grub got pooched? I actually had similar problems when I initially set up the machine and forgot some steps...

hey bro, I had to change my hooks in mkinitcpio.conf. Might be a different problem. might be related.
https://bbs.archlinux.org/viewtopic.php?id=189090
Last edited by ninjaaron (2014-10-29 19:08:32)

[SLOVED] All my USB not work after upgrade system.

Hello all,
I'm new in Arch, and i install my system with your LiveCD (2005).
In the first boot, all work good. But after upgrade (pacman -Syu), all my USB device (Keyboard, Mouse) not work.
I'm not using (yet) with Xorg, just in command shell (tty1), But i can't press anything cuz my keyboard not work.
I try to do that (https://bbs.archlinux.org/viewtopic.php … 19#p906119), but no work to me too.
What i can to do to fix this?
My dmesg:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010
Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf564000 (usable)
BIOS-e820: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
BIOS-e820: 00000000bf5bb000 - 00000000bf5db000 (reserved)
BIOS-e820: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
BIOS-e820: 00000000bf5ec000 - 00000000bf600000 (reserved)
BIOS-e820: 00000000bf600000 - 00000000bf602000 (usable)
BIOS-e820: 00000000bf602000 - 00000000bf603000 (ACPI data)
BIOS-e820: 00000000bf603000 - 00000000bf60b000 (reserved)
BIOS-e820: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
BIOS-e820: 00000000bf615000 - 00000000bf63e000 (reserved)
BIOS-e820: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
BIOS-e820: 00000000bf681000 - 00000000bf800000 (usable)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000023f800000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
No AGP bridge found
last_pfn = 0x23f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 23F800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009ec00 (usable)
modified: 000000000009ec00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bf564000 (usable)
modified: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
modified: 00000000bf5bb000 - 00000000bf5db000 (reserved)
modified: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
modified: 00000000bf5ec000 - 00000000bf600000 (reserved)
modified: 00000000bf600000 - 00000000bf602000 (usable)
modified: 00000000bf602000 - 00000000bf603000 (ACPI data)
modified: 00000000bf603000 - 00000000bf60b000 (reserved)
modified: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
modified: 00000000bf615000 - 00000000bf63e000 (reserved)
modified: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
modified: 00000000bf681000 - 00000000bf800000 (usable)
modified: 00000000fed1c000 - 00000000fed20000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 000000023f800000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fcda0] fcda0
init_memory_mapping: 0000000000000000-00000000bf800000
0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 16000-1a000
init_memory_mapping: 0000000100000000-000000023f800000
0100000000 - 023f800000 page 2M
kernel direct mapping tables up to 23f800000 @ 18000-22000
RAMDISK: 37c44000 - 37e19ab8
ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
ACPI: XSDT 00000000bf5ae068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bf5b7ba0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bf5ae140 09A5C (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bf60cf80 00040
ACPI: APIC 00000000bf5b7c98 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000bf5b7d10 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000bf5b7e18 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000bf5b7e58 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
(13 early reservations) ==> bootmem [0000000000 - 023f800000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 00016d7b38] TEXT DATA BSS ==> [0001000000 - 00016d7b38]
#2 [0037c44000 - 0037e19ab8] RAMDISK ==> [0037c44000 - 0037e19ab8]
#3 [00016d8000 - 00016d826b] BRK ==> [00016d8000 - 00016d826b]
#4 [00000fcdb0 - 0000100000] BIOS reserved ==> [00000fcdb0 - 0000100000]
#5 [00000fcda0 - 00000fcdb0] MP-table mpf ==> [00000fcda0 - 00000fcdb0]
#6 [000009ec00 - 00000fca90] BIOS reserved ==> [000009ec00 - 00000fca90]
#7 [00000fcd24 - 00000fcda0] BIOS reserved ==> [00000fcd24 - 00000fcda0]
#8 [00000fca90 - 00000fcd24] MP-table mpc ==> [00000fca90 - 00000fcd24]
#9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
#10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
#11 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000]
#12 [0000018000 - 000001d000] PGTABLE ==> [0000018000 - 000001d000]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0023f800
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000bf564
0: 0x000bf600 -> 0x000bf602
0: 0x000bf681 -> 0x000bf800
0: 0x00100000 -> 0x0023f800
On node 0 totalpages: 2092659
DMA zone: 56 pages used for memmap
DMA zone: 110 pages reserved
DMA zone: 3816 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765725 pages, LIFO batch:31
Normal zone: 17892 pages used for memmap
Normal zone: 1290780 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf564000 - 00000000bf5bb000
PM: Registered nosave memory: 00000000bf5bb000 - 00000000bf5db000
PM: Registered nosave memory: 00000000bf5db000 - 00000000bf5ec000
PM: Registered nosave memory: 00000000bf5ec000 - 00000000bf600000
PM: Registered nosave memory: 00000000bf602000 - 00000000bf603000
PM: Registered nosave memory: 00000000bf603000 - 00000000bf60b000
PM: Registered nosave memory: 00000000bf60b000 - 00000000bf615000
PM: Registered nosave memory: 00000000bf615000 - 00000000bf63e000
PM: Registered nosave memory: 00000000bf63e000 - 00000000bf681000
PM: Registered nosave memory: 00000000bf800000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880008a00000 s89176 r8192 d21416 u524288
pcpu-alloc: s89176 r8192 d21416 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060321
Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8167004k/9428992k available (3449k kernel code, 1058356k absent, 202696k reserved, 1818k data, 484k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:768
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3311.105 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.13 BogoMIPS (lpj=11037016)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
Booting Node 0, Processors #1
CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
#2
CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
#3 Ok.
CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
Brought up 4 CPUs
Total of 4 processors activated (26499.22 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20091214/nsinit-340)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xfe707000-0xfe70700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xfe706000-0xfe7063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xfe705000-0xfe7053ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: reg 10: [mem 0xfe704000-0xfe7040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 24: [io 0xf020-0xf02f]
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe620000-0xfe63ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe600000-0xfe61ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xfe640000-0xfe643fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: reg 10: [io 0xd040-0xd047]
pci 0000:03:00.0: reg 14: [io 0xd030-0xd033]
pci 0000:03:00.0: reg 18: [io 0xd020-0xd027]
pci 0000:03:00.0: reg 1c: [io 0xd010-0xd013]
pci 0000:03:00.0: reg 20: [io 0xd000-0xd00f]
pci 0000:03:00.0: reg 30: [mem 0xfe500000-0xfe50ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:05:00.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:0b: [io 0x0400-0x0453] has been reserved
system 00:0b: [io 0x0458-0x047f] has been reserved
system 00:0b: [io 0x0500-0x057f] has been reserved
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [io 0x0454-0x0457] has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io disabled]
pci 0000:00:1c.5: bridge window [mem disabled]
pci 0000:00:1c.5: bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem disabled]
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [io disabled]
pci 0000:06:00.0: bridge window [mem disabled]
pci 0000:06:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 06-07]
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [mem disabled]
pci 0000:00:1c.7: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:06:00.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:06: resource 3 [io 0x0000-0xffff]
pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:07: resource 6 [io 0x0000-0xffff]
pci_bus 0000:07: resource 7 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1878k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000979e000 - ffff88000d79e000
software IO TLB at phys 0x979e000 - 0xd79e000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1304838033.699:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15956
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 28 for MSI/MSI-X
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 484k freed
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 20
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 20
ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 20
pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:03:00.0: setting latency timer to 64
pata_acpi 0000:03:00.0: PCI INT A disabled
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-6: WDC WD1200JD-00GBB0, 02.05D02, max UDMA/100
ata1.01: 234441648 sectors, multi 16: LBA48
ata1.01: applying bridge limits
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA WDC WD1200JD-00G 02.0 PQ: 0 ANSI: 5
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max MWDMA2
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.00: limiting SATA link speed to 1.5 Gbps
ata2.00: limiting speed to MWDMA2:PIO3
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.00: disabled
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2: EH complete
pata_via 0000:03:00.0: version 0.3.4
pata_via 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_via 0000:03:00.0: setting latency timer to 64
scsi4 : pata_via
scsi5 : pata_via
ata5: PATA max UDMA/133 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 16
ata6: PATA max UDMA/133 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 16
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:1:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb2 sdb3 sdb4 < sdb5 >
sda: sda1 sda2
sd 0:0:1:0: [sdb] Attached SCSI disk
sda3
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sdb5): mounted filesystem with ordered data mode
<30>udev[901]: starting version 167
Adding 7030776k swap on /dev/sdb2. Priority:-1 extents:1 across:7030776k
Thanks a lots.
Last edited by KingYes (2011-05-08 11:03:55)

FYI, the latest installation CD version is "2010.05". It's best to use the latest. Get it from http://www.archlinux.org/download/
I'm not sure but I believe all other LiveCDs are custom made outside of the official Archlinux development team.
I recommend downloading the CD I mentioned and follow this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide
I've installed arch many times on different hardware and the only time I lost mouse and keyboard was after I removed "10-evdev.conf" and "10-quirks.conf" from /etc/X11/xorg.conf.d/. I copied both back from backups, rebooted and m&k were functional again. My guess is "10-evdev.conf" was the file I needed. Check both these files exist.

How to register Final Cut Studio after upgrading system?

After upgrading my system and changing to a new G5 Final Cut Studio lost Registering Info.
Always after around 5 times booting Final Cut I have a dialog box, that I have to register.
But the "Register Now" button is not aktive!
What to do?
G5 2x2 GB 1,5 GB RAM Mac OS X (10.4.7)
G5 2x2 GB 1,5 GB RAM Mac OS X (10.4.5)

Make sure you have filled out all the fields
If I remember right, there is one field that is left blank (can not remember which one). Fill that one in, and the register button should become active.

After upgrade it won't boot

I have a MBP Mid 2010 13 inch that we had at work that would not boot. I ended up erasing the disk and went out and bought Snow Leopard to install on it. Snow Leopard installed and booted fine but anytime I try to do the updates the system will not boot. I can the go back in reinstall from the DVD and it boots fine but of course without the updates. I have run the Apple hardware test and that did not find any errors.
If I have it go into verbose mode during boot the last thing that gets displayed is AirPort: Link Down on en1. Reason 1 (Unspecified)
The retail version of Snow Leopard that I bought was 10.6.3 and I tried to update to 10.6.8 and had the issue. Then I reloaded and tried again but just to 10.6.4 and had the same issue.
I have probably reloaded it 4 times now and changed the hard disk out for that last reload/update and it did the same thing.
I had hoped to put Lion on this but need to get it to 10.6.8 first. This thing is crazy frustrating..... Anyone got any ideas?
TIA

mwkirk wrote:
Link Down on en1. Reason 1 (Unspecified)
Sound like you have the old Snow Leopard "dropped Wfi" issue.
Seem the recourse is to flush your router and reset it.
Direct connect via ethernet cable to the modem
1: grab firmware updates for router (if not Apple) else Software Update and Airport Update.
2: WPA2 (AES) Personal 20 random character password, one each for Admin and Guest Internet access
3: leave MAC filtering and invisible alone, doesn't work against hackers, just causes connection issues.
https://discussions.apple.com/thread/2142725?start=495&tstart=0

[SOLVED] System fails to boot after upgrade.

Not exactly sure what happened as the upgrade appeared to go smoothly. Now trying to start just causes an endless cycle of rebooting. I have been unable to even boot into single user mode. Any suggestions are greatly appreciated here.
Using the livecd I can mount all the filesystems, and I have run fsck on all of them so I know they are clean. Here are my grub entries:
# (0) Arch Linux
title Arch Linux
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/569a7fe5-7452-4064-adc1-71b6b2b58b0b resume=/dev/sda7 ro vga=773 elevator=deadline
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/569a7fe5-7452-4064-adc1-71b6b2b58b0b ro vga=773
initrd /boot/kernel26-fallback.img
I have tried using a kernel line of just:
kernel /boot/vmlinuz26 root=/dev/sda2 ro
and get the same results, as soon as grub starts to load the kernel the system reboots and I can't see what's on screen long enough to know what's happening.
pacman.log:
[2009-07-19 16:02] synchronizing package lists
[2009-07-19 16:02] starting full system upgrade
[2009-07-20 14:52] synchronizing package lists
[2009-07-20 14:52] starting full system upgrade
[2009-07-20 14:54] starting full system upgrade
[2009-07-20 15:44] upgraded kernel-headers (2.6.29.3-1 -> 2.6.30.1-1)
[2009-07-20 15:44] Generating locales...
[2009-07-20 15:44] en_US.UTF-8... done
[2009-07-20 15:44] en_US.ISO-8859-1... done
[2009-07-20 15:44] Generation complete.
[2009-07-20 15:44] upgraded glibc (2.10.1-2 -> 2.10.1-3)
[2009-07-20 15:44] upgraded readline (5.2.013-2 -> 6.0.003-1)
[2009-07-20 15:44] upgraded abook (0.6.0pre2-1 -> 0.6.0pre2-2)
[2009-07-20 15:44] upgraded gcc-libs (4.4.0-3 -> 4.4.0-5)
[2009-07-20 15:44] upgraded libgcrypt (1.4.4-1 -> 1.4.4-2)
[2009-07-20 15:44] upgraded gnutls (2.8.0-1 -> 2.8.1-1)
[2009-07-20 15:44] upgraded bash (3.2.048-3 -> 4.0.024-1)
[2009-07-20 15:44] upgraded e2fsprogs (1.41.6-1 -> 1.41.8-1)
[2009-07-20 15:44] upgraded perl (5.10.0-4 -> 5.10.0-6)
[2009-07-20 15:44] warning: /etc/ssl/openssl.cnf installed as /etc/ssl/openssl.cnf.pacnew
[2009-07-20 15:44] upgraded openssl (0.9.8k-2 -> 0.9.8k-4)
[2009-07-20 15:44] upgraded sqlite3 (3.6.15-1 -> 3.6.15-2)
[2009-07-20 15:44] upgraded heimdal (1.2.1-3 -> 1.2.1-5)
[2009-07-20 15:44] upgraded libpng (1.2.37-1 -> 1.2.38-1)
[2009-07-20 15:44] upgraded libjpeg (6b-6 -> 7-1)
[2009-07-20 15:44] upgraded libtiff (3.8.2-4 -> 3.8.2-5)
[2009-07-20 15:44] upgraded libcups (1.3.10-2 -> 1.3.11-1)
[2009-07-20 15:44] upgraded cairo (1.8.6-1 -> 1.8.8-1)
[2009-07-20 15:44] upgraded libthai (0.1.11-1 -> 0.1.12-1)
[2009-07-20 15:44] upgraded pango (1.24.2-1 -> 1.24.4-2)
[2009-07-20 15:44] upgraded gtk2 (2.16.2-1 -> 2.16.5-1)
[2009-07-20 15:44] upgraded aiksaurus (1.2.1-1 -> 1.2.1-2)
[2009-07-20 15:45] upgraded python (2.6.2-2 -> 2.6.2-5)
[2009-07-20 15:45] upgraded boost (1.37.0-1 -> 1.39.0-1)
[2009-07-20 15:45] upgraded libmysqlclient (5.1.35-2 -> 5.1.36-1)
[2009-07-20 15:45] upgraded mysql-clients (5.1.35-1 -> 5.1.36-1)
[2009-07-20 15:45] upgraded mysql (5.1.35-1 -> 5.1.36-1)
[2009-07-20 15:45] upgraded libmng (1.0.10-1 -> 1.0.10-2)
[2009-07-20 15:45] upgraded dri2proto (2.0-1 -> 2.1-1)
[2009-07-20 15:45] upgraded libdrm (2.4.11-2 -> 2.4.12-1)
[2009-07-20 15:45] upgraded libxt (1.0.5-2 -> 1.0.6-1)
[2009-07-20 15:45] upgraded mesa (7.4.4-1 -> 7.5-1)
[2009-07-20 15:45]
[2009-07-20 15:45] > Qt 4.5.1
[2009-07-20 15:45]
[2009-07-20 15:45] Prefix: /usr
[2009-07-20 15:45]
[2009-07-20 15:45] > ATTENTION
[2009-07-20 15:45] Some components are split into separate packages:
[2009-07-20 15:45]
[2009-07-20 15:45] qtmod : Base libraries and tools
[2009-07-20 15:45] qtmod-doc : Documentation
[2009-07-20 15:45] qtmod-demos : Demos & Examples
[2009-07-20 15:45] qtmod-tools : Development Tools (Assistant, Designer, Linguist)
[2009-07-20 15:45]
[2009-07-20 15:45] upgraded qtmod (4.5.1-2 -> 4.5.1-4)
[2009-07-20 15:45] upgraded akonadi (1.1.2-1 -> 1.1.2-2)
[2009-07-20 15:45] upgraded apr (1.3.3-1 -> 1.3.5-1)
[2009-07-20 15:45] upgraded unixodbc (2.2.14-1 -> 2.2.14-2)
[2009-07-20 15:45] upgraded apr-util (1.3.4-1 -> 1.3.7-1)
[2009-07-20 15:45] upgraded apvlv (0.0.6.5-1 -> 0.0.6.7-1)
[2009-07-20 15:45] upgraded libsndfile (1.0.20-2 -> 1.0.20-3)
[2009-07-20 15:45] upgraded jack-audio-connection-kit (0.116.2-1 -> 0.116.2-2)
[2009-07-20 15:45] upgraded wxgtk (2.8.10.1-1 -> 2.8.10.1-4)
[2009-07-20 15:45] upgraded audacity (1.3.7-1 -> 1.3.8-1)
[2009-07-20 15:45] upgraded avifile (0.7.45-3 -> 0.7.45-4)
[2009-07-20 15:45] upgraded imlib2 (1.4.2-2 -> 1.4.2-3)
[2009-07-20 15:45] upgraded libxdg-basedir (1.0.0-2 -> 1.0.1-1)
[2009-07-20 15:45] upgraded lua (5.1.4-3 -> 5.1.4-4)
[2009-07-20 15:45]
[2009-07-20 15:45] ==> awesome installation notes:
[2009-07-20 15:45] ----------------------------------------
[2009-07-20 15:45] During some updates of awesome, the config file syntax changes heavily.
[2009-07-20 15:45] This means that your configuration file (~/.config/awesome/rc.lua) for
[2009-07-20 15:45] any other than this particular version of awesome may or may not work.
[2009-07-20 15:45]
[2009-07-20 15:45] upgraded awesome (3.3-2 -> 3.3.1-1)
[2009-07-20 15:45] upgraded bc (1.06-5 -> 1.06-6)
[2009-07-20 15:45] upgraded binutils (2.19.1-4 -> 2.19.1-5)
[2009-07-20 15:45] upgraded gstreamer0.10-base-plugins (0.10.23-1 -> 0.10.23-2)
[2009-07-20 15:45] upgraded brasero (2.26.2-1 -> 2.26.3-1)
[2009-07-20 15:45] upgraded run-parts (2.31-1 -> 3.1.3-1)
[2009-07-20 15:45] upgraded sed (4.2-1 -> 4.2.1-1)
[2009-07-20 15:45] Updating certificates in /etc/ssl/certs... 4 added, 0 removed; done.
[2009-07-20 15:45] Running hooks in /etc/ca-certificates/update.d....done.
[2009-07-20 15:45] upgraded ca-certificates (20080809-5 -> 20090709-1)
[2009-07-20 15:45] upgraded cairomm (1.8.0-1 -> 1.8.2-1)
[2009-07-20 15:45] upgraded calcurse (2.5-1 -> 2.6-1)
[2009-07-20 15:45] upgraded mjpegtools (1.9.0-1 -> 1.9.0-2)
[2009-07-20 15:45] upgraded cinelerra-cv (20090519-1 -> 20090715-1)
[2009-07-20 15:45] upgraded ctags (5.7-1 -> 5.8-1)
[2009-07-20 15:45] upgraded lcms (1.18-1 -> 1.18-2)
[2009-07-20 15:45]
[2009-07-20 15:45] NOTE for drcaw:
[2009-07-20 15:45] ----
[2009-07-20 15:45] ==> dcraw provides the simple commandline tools for raw conversion. If you
[2009-07-20 15:45] ==> are looking for a more sophisticated way consider gimp-ufraw, which
[2009-07-20 15:45] ==> provides a gimp-plugin and a standalone application that can even convert
[2009-07-20 15:45] ==> to 16-bit tiff files (which you can use in cinepaint eg.) So please do a
[2009-07-20 15:45] ==> 'pacman -S gimp-ufraw' to get it.
[2009-07-20 15:45]
[2009-07-20 15:45] upgraded dcraw (1.410-1 -> 1.425-1)
[2009-07-20 15:45] upgraded libtorrent-rasterbar (0.14.2-1 -> 0.14.4-2)
[2009-07-20 15:45]
[2009-07-20 15:45] >>> Deluge's daemon is running with the "deluge" user. The default download directory is /srv/deluge/
[2009-07-20 15:45]
[2009-07-20 15:45] upgraded deluge (1.1.9-1 -> 1.1.9-2)
[2009-07-20 15:45] upgraded device-mapper (1.02.32-1 -> 1.02.33-1)
[2009-07-20 15:45] upgraded jasper (1.900.1-2 -> 1.900.1-3)
[2009-07-20 15:45] upgraded devil (1.7.8-1 -> 1.7.8-2)
[2009-07-20 15:45] upgraded dhcpcd (5.0.4-1 -> 5.0.6-1)
[2009-07-20 15:45] > Rebuilding MIME database ... DONE
[2009-07-20 15:45] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:45] upgraded kdemod-kdelibs (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:45] upgraded libtool (2.2.6a-1 -> 2.2.6a-2)
[2009-07-20 15:46] NOTE
[2009-07-20 15:46] ----
[2009-07-20 15:46] Add your user to group 'camera' to use camera devices.
[2009-07-20 15:46] upgraded libgphoto2 (2.4.6-1 -> 2.4.6-2)
[2009-07-20 15:46] NOTE
[2009-07-20 15:46] ----
[2009-07-20 15:46] Add your user to group 'scanner' to use scanner devices.
[2009-07-20 15:46] upgraded sane (1.0.20-2 -> 1.0.20-3)
[2009-07-20 15:46] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:46] upgraded kdemod-kdegraphics-common (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:46] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:46] upgraded kdemod-kdepimlibs (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:46] upgraded digikam (0.10.0-2 -> 0.10.0-3)
[2009-07-20 15:46] upgraded directfb (1.2.8-1 -> 1.4.1-1)
[2009-07-20 15:46] upgraded ghostscript (8.64-5 -> 8.64-6)
[2009-07-20 15:46] upgraded libwmf (0.2.8.4-4 -> 0.2.8.4-5)
[2009-07-20 15:46] upgraded libxml2 (2.7.3-1.1 -> 2.7.3-2)
[2009-07-20 15:46] upgraded imagemagick (6.5.3.2-1 -> 6.5.3.10-1)
[2009-07-20 15:46] upgraded dvdauthor (0.6.14-4 -> 0.6.14-5)
[2009-07-20 15:46] -- Edit config.h in PKGBUILD's directory (generally /var/abs/community/x11/dwm/)
[2009-07-20 15:46] -- and rebuild package if you want to change settings.
[2009-07-20 15:46] upgraded dwm (5.5-1 -> 5.6-1)
[2009-07-20 15:46] upgraded smbclient (3.3.6-1 -> 3.3.6-2)
[2009-07-20 15:46] upgraded mplayer (29318-1.1 -> 29411-3)
[2009-07-20 15:46] installed flam3 (2.7.18-3)
[2009-07-20 15:46] upgraded electricsheep (2.6.8-4 -> 2.7b12-1)
[2009-07-20 15:46] upgraded enblend-enfuse (3.2-2 -> 3.2-3)
[2009-07-20 15:46] upgraded gnome-keyring (2.26.1-1 -> 2.26.3-1)
[2009-07-20 15:46] upgraded libsoup (2.26.2-1 -> 2.26.3-1)
[2009-07-20 15:46] upgraded libgweather (2.26.1-2 -> 2.26.2.1-1)
[2009-07-20 15:46] upgraded evolution-data-server (2.26.2-1 -> 2.26.3-1)
[2009-07-20 15:46] upgraded gtkhtml (3.26.2-1 -> 3.26.3-1)
[2009-07-20 15:46] upgraded evolution (2.26.2-1 -> 2.26.3-1)
[2009-07-20 15:46] upgraded evolution-exchange (2.26.2-1 -> 2.26.3-1)
[2009-07-20 15:46] upgraded feh (1.3.4-4 -> 1.3.4-5)
[2009-07-20 15:46] upgraded ffmpegthumbnailer (1.5.0-1 -> 1.5.4-2)
[2009-07-20 15:46] upgraded filezilla (3.2.4.1-1 -> 3.2.6.1-1)
[2009-07-20 15:46] upgraded fltk (1.1.9-1 -> 1.1.9-2)
[2009-07-20 15:46] upgraded fluidsynth (1.0.8-1 -> 1.0.9-1)
[2009-07-20 15:46] upgraded fox (1.6.35-1 -> 1.6.36-1)
[2009-07-20 15:47] upgraded freeciv (2.1.9-1 -> 2.1.9-2)
[2009-07-20 15:47] upgraded gcc (4.4.0-3 -> 4.4.0-5)
[2009-07-20 15:47] upgraded gd (2.0.35-1 -> 2.0.35-2)
[2009-07-20 15:47] upgraded gedit (2.26.2-1 -> 2.26.3-1)
[2009-07-20 15:47] upgraded gegl (0.0.22-1 -> 0.0.22-2)
[2009-07-20 15:47] upgraded gimp (2.6.6-1 -> 2.6.6-2)
[2009-07-20 15:47] upgraded gimp-ufraw (0.15-2 -> 0.15-4)
[2009-07-20 15:47] upgraded glade (3.6.5-2 -> 3.6.7-1)
[2009-07-20 15:47] upgraded glib-perl (1.221-1 -> 1.222-1)
[2009-07-20 15:47] upgraded glibmm (2.20.0-1 -> 2.20.1-1)
[2009-07-20 15:47] upgraded gmerlin (0.4.0-4 -> 0.4.0-5)
[2009-07-20 15:47] upgraded gnome-desktop (2.26.2-1 -> 2.26.3-1)
[2009-07-20 15:47] upgraded gnome-menus (2.26.1-1 -> 2.26.2-1)
[2009-07-20 15:47] upgraded libwnck (2.26.1-1 -> 2.26.2-1)
[2009-07-20 15:47] upgraded gnome-panel (2.26.2-1 -> 2.26.3-1)
[2009-07-20 15:48] upgraded gnome-themes (2.26.2-1 -> 2.26.3.1-1)
[2009-07-20 15:48] upgraded gnupg (1.4.9-1 -> 1.4.9-4)
[2009-07-20 15:48] upgraded gnupg2 (2.0.11-1 -> 2.0.12-1)
[2009-07-20 15:48] upgraded libxaw (1.0.5-1 -> 1.0.6-1)
[2009-07-20 15:48] upgraded graphviz (2.22.2-1.1 -> 2.22.2-2)
[2009-07-20 15:48] upgraded grep (2.5.4-2 -> 2.5.4-3)
[2009-07-20 15:48] upgraded gstreamer0.10-good-plugins (0.10.15-1 -> 0.10.15-2)
[2009-07-20 15:48] upgraded gtk-recordmydesktop (0.3.8-1 -> 0.3.8-2)
[2009-07-20 15:48] upgraded gtk2-perl (1.220-1 -> 1.221-1)
[2009-07-20 15:48] upgraded guile (1.8.6-1 -> 1.8.7-1)
[2009-07-20 15:48] >>please run /usr/sbin/cups-genppdupdate
[2009-07-20 15:48] >>and restart cups deamon
[2009-07-20 15:48] upgraded gutenprint (5.2.3-1 -> 5.2.3-3)
[2009-07-20 15:48]
[2009-07-20 15:48] NOTE
[2009-07-20 15:48] ----
[2009-07-20 15:48] # If you want to use this driver with sane:
[2009-07-20 15:48] # echo "hpaio" >> /etc/sane.d/dll.conf
[2009-07-20 15:48]
[2009-07-20 15:48]
[2009-07-20 15:48] UPGRADING
[2009-07-20 15:48] ----
[2009-07-20 15:48] # This version no longer uses an init script. You should remove hplip
[2009-07-20 15:48] # from the /etc/rc.conf daemon list.
[2009-07-20 15:48]
[2009-07-20 15:48] upgraded hplip (3.9.4b-1 -> 3.9.4b-2)
[2009-07-20 15:48] upgraded htmldoc (1.8.27-1 -> 1.8.27-2)
[2009-07-20 15:48] upgraded libpano13 (2.9.12-1 -> 2.9.12-2)
[2009-07-20 15:48] upgraded hugin (0.7.0-4 -> 0.7.0-5)
[2009-07-20 15:48] upgraded hwdetect (2009.06-1 -> 2009.07-1)
[2009-07-20 15:48] upgraded icu (4.2-1 -> 4.2.1-1)
[2009-07-20 15:48] upgraded imlib (1.9.15-5 -> 1.9.15-6)
[2009-07-20 15:48] upgraded inkscape (0.46-11 -> 0.46-12)
[2009-07-20 15:48] upgraded iptables (1.4.3.2-1 -> 1.4.4-1)
[2009-07-20 15:48] upgraded iw (0.9.14-1 -> 0.9.15-1)
[2009-07-20 15:48] upgraded iwlwifi-4965-ucode (228.57.2.23-1 -> 228.61.2.24-1)
[2009-07-20 15:48] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:48] upgraded kdemod-kdebase-runtime (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:48] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:48] upgraded kdemod-kdebase (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] upgraded kdemod-kdebase-doc (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdebase-konsole (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdebase-kwrite (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] upgraded kdemod-kdebase-runtime-doc (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdebase-runtime-icons (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdebase-workspace (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] upgraded kdemod-kdebase-workspace-doc (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] upgraded kdemod-kdebase-workspace-wallpapers (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] upgraded kdemod-kdegraphics-doc (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdegraphics-gwenview (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdegraphics-kamera (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdegraphics-kcolorchooser (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdegraphics-kolourpaint (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdegraphics-kruler (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdegraphics-ksnapshot (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] upgraded libdjvu (3.5.22-1 -> 3.5.22-2)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdegraphics-okular (4.2.4-1 -> 4.2.4-3)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdenetwork-common (4.2.4-1 -> 4.2.4-2)
[2009-07-20 15:49] upgraded kdemod-kdenetwork-doc (4.2.4-1 -> 4.2.4-2)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdenetwork-kget (4.2.4-1 -> 4.2.4-2)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdenetwork-kopete (4.2.4-1 -> 4.2.4-2)
[2009-07-20 15:49] upgraded ppp (2.4.4-8 -> 2.4.4-9)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdenetwork-kppp (4.2.4-1 -> 4.2.4-2)
[2009-07-20 15:49] upgraded libvncserver (0.9.7-1 -> 0.9.7-2)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdenetwork-krdc (4.2.4-1 -> 4.2.4-2)
[2009-07-20 15:49] > Rebuilding xdg icon database ... DONE
[2009-07-20 15:49] upgraded kdemod-kdenetwork-krfb (4.2.4-1 -> 4.2.4-2)
[2009-07-20 15:50] >>> Updating module dependencies. Please wait ...
[2009-07-20 15:50] >>> MKINITCPIO SETUP
[2009-07-20 15:50] >>> ----------------
[2009-07-20 15:50] >>> If you use LVM2, Encrypted root or software RAID,
[2009-07-20 15:50] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-07-20 15:50] >>> More information about mkinitcpio setup can be found here:
[2009-07-20 15:50] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-07-20 15:50]
[2009-07-20 15:50] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2009-07-20 15:50] ==> Building image "default"
[2009-07-20 15:50] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-07-20 15:50] :: Begin build
[2009-07-20 15:50] :: Parsing hook [base]
[2009-07-20 15:50] :: Parsing hook [udev]
[2009-07-20 15:50] :: Parsing hook [autodetect]
[2009-07-20 15:51] :: Parsing hook [pata]
[2009-07-20 15:51] :: Parsing hook [scsi]
[2009-07-20 15:51] :: Parsing hook [sata]
[2009-07-20 15:51] :: Parsing hook [filesystems]
[2009-07-20 15:51] :: Generating module dependencies
[2009-07-20 15:51] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-07-20 15:51] ==> SUCCESS
[2009-07-20 15:51] ==> Building image "fallback"
[2009-07-20 15:51] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-07-20 15:51] :: Begin build
[2009-07-20 15:51] :: Parsing hook [base]
[2009-07-20 15:51] :: Parsing hook [udev]
[2009-07-20 15:51] :: Parsing hook [pata]
[2009-07-20 15:51] :: Parsing hook [scsi]
[2009-07-20 15:51] :: Parsing hook [sata]
[2009-07-20 15:51] :: Parsing hook [filesystems]
[2009-07-20 15:51] :: Generating module dependencies
[2009-07-20 15:51] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-07-20 15:51] ==> SUCCESS
[2009-07-20 15:51] upgraded kernel26 (2.6.30-5 -> 2.6.30.1-1)
[2009-07-20 15:51] upgraded kismet (2008_05_R1-4 -> 2008_05_R1-5)
[2009-07-20 15:51] upgraded lib32-cairo (1.8.6-1 -> 1.8.8-1)
[2009-07-20 15:51] upgraded lib32-glibc (2.10.1-2 -> 2.10.1-3)
[2009-07-20 15:51] upgraded lib32-e2fsprogs (1.41.6-1 -> 1.41.8-1)
[2009-07-20 15:51] upgraded lib32-gcc-libs (4.4.0-3 -> 4.4.0-5)
[2009-07-20 15:51] upgraded lib32-glib2 (2.20.3-1 -> 2.20.4-1)
[2009-07-20 15:51] upgraded lib32-readline (5.2.013-2 -> 6.0.003-1)
[2009-07-20 15:51] upgraded lib32-gnutls (2.8.0-1 -> 2.8.1-1)
[2009-07-20 15:51] upgraded lib32-openssl (0.9.8k-2 -> 0.9.8k-4)
[2009-07-20 15:51] upgraded lib32-heimdal (1.2.1-3 -> 1.2.1-5)
[2009-07-20 15:51] upgraded lib32-libjpeg (6b-6 -> 7-1)
[2009-07-20 15:51] upgraded lib32-libtiff (3.8.2-4 -> 3.8.2-5)
[2009-07-20 15:51] upgraded lib32-libcups (1.3.10-2 -> 1.3.11-1)
[2009-07-20 15:51] upgraded lib32-pango (1.24.2-1 -> 1.24.4-2)
[2009-07-20 15:51] upgraded lib32-gtk2 (2.16.2-1 -> 2.16.5-1)
[2009-07-20 15:51] upgraded lib32-libdrm (2.4.11-2 -> 2.4.12-1)
[2009-07-20 15:51] upgraded lib32-libgcrypt (1.4.4-1 -> 1.4.4-2)
[2009-07-20 15:51] upgraded lib32-libgl (7.4.2-2 -> 7.4.4-1)
[2009-07-20 15:51] upgraded lib32-libxml2 (2.7.3-1 -> 2.7.3-2)
[2009-07-20 15:51] upgraded lib32-libxt (1.0.5-2 -> 1.0.6-1)
[2009-07-20 15:51] upgraded lib32-mesa (7.4.2-1 -> 7.4.4-1)
[2009-07-20 15:51] upgraded lib32-sqlite3 (3.6.15-1 -> 3.6.15-2)
[2009-07-20 15:51] upgraded libcanberra (0.12-1 -> 0.14-1)
[2009-07-20 15:51] upgraded libevent (1.4.10-1 -> 1.4.11-1)
[2009-07-20 15:51] upgraded libgdiplus (2.4-1 -> 2.4.2-1)
[2009-07-20 15:51] upgraded libquicktime (1.1.1-3 -> 1.1.1-4)
[2009-07-20 15:52] upgraded libwebkit (1.1.10-1 -> 1.1.10-2)
[2009-07-20 15:52] upgraded links-g (2.2-1 -> 2.2-2)
[2009-07-20 15:52] upgraded lvm2 (2.02.47-1 -> 2.02.48-1)
[2009-07-20 15:52] upgraded mercurial (1.2.1-1 -> 1.3-3)
[2009-07-20 15:52] upgraded mtools (4.0.10-2 -> 4.0.10-3)
[2009-07-20 15:52] upgraded mutagen (1.15-1 -> 1.16-1)
[2009-07-20 15:52] upgraded namcap (2.2-2 -> 2.3-1)
[2009-07-20 15:52] upgraded nautilus-cd-burner (2.24.0-1 -> 2.24.0-2)
[2009-07-20 15:52] upgraded ncmpcpp (0.3.4-1 -> 0.3.5-1)
[2009-07-20 15:52] upgraded wpa_supplicant (0.6.9-1 -> 0.6.9-2)
[2009-07-20 15:52] upgraded netcfg (2.1.3-3 -> 2.2.1-1)
[2009-07-20 15:52] upgraded neverball (1.5.1-1 -> 1.5.1-2)
[2009-07-20 15:52] upgraded nmap (4.76-4 -> 5.00-1)
[2009-07-20 15:52] upgraded openmovieeditor (0.0.20090105-3 -> 0.0.20090105-4)
[2009-07-20 15:52] * relogin or source /etc/profile.d/openoffice.sh
[2009-07-20 15:52] * see http://wiki.archlinux.org/index.php/Openoffice
[2009-07-20 15:52] how to use extensions, e.g. for spell checking
[2009-07-20 15:52] see /opt/openoffice/share/extension/install what
[2009-07-20 15:52] is shipped with this package
[2009-07-20 15:52] upgraded openoffice-base (3.1.0-2 -> 3.1.0-5)
[2009-07-20 15:52] upgraded parted (1.8.8-2 -> 1.8.8-3)
[2009-07-20 15:52] upgraded pcmanfm (0.5.1-1 -> 0.5.1-2)
[2009-07-20 15:52] upgraded perl-html-parser (3.60-1 -> 3.61-1)
[2009-07-20 15:52] upgraded perl-uri (1.37-1 -> 1.38-1)
[2009-07-20 15:52] upgraded perl-libwww (5.825-1 -> 5.829-1)
[2009-07-20 15:52] upgraded postgresql-libs (8.3.7-1 -> 8.3.7-2)
[2009-07-20 15:52] upgraded pgadmin3 (1.10.0beta3-1 -> 1.10.0-1)
[2009-07-20 15:52] upgraded pil (1.1.6-5 -> 1.1.6-6)
[2009-07-20 15:52] upgraded pilot-link (0.12.3-4 -> 0.12.3-5)
[2009-07-20 15:52] upgraded poppler (0.10.7-1 -> 0.10.7-2)
[2009-07-20 15:52] upgraded postgresql (8.3.7-2 -> 8.3.7-3)
[2009-07-20 15:52] upgraded pycairo (1.8.4-1 -> 1.8.6-1)
[2009-07-20 15:52] upgraded qingy (0.9.9-1 -> 0.9.9-2)
[2009-07-20 15:52] upgraded qt3 (3.3.8-11 -> 3.3.8-12)
[2009-07-20 15:52] upgraded ruby (1.8.7_p173-1 -> 1.8.7_p174-1)
[2009-07-20 15:52] upgraded ruby-libart (0.18.1-1 -> 0.19.0-2)
[2009-07-20 15:52] upgraded samba (3.3.6-1 -> 3.3.6-2)
[2009-07-20 15:52] upgraded sdl_image (1.2.7-1 -> 1.2.7-2)
[2009-07-20 15:52] upgraded sauerbraten (2008_06_20_ctf_edition-1 -> 2009_05_04_trooper_edition-1)
[2009-07-20 15:52] upgraded sdl_perl (2.1.3-4 -> 2.1.3-5)
[2009-07-20 15:52] Fixing gshadow file ...
[2009-07-20 15:52] upgraded shadow (4.1.3.1-1 -> 4.1.4.1-1)
[2009-07-20 15:52] upgraded silly (0.1.0-2 -> 0.1.0-3)
[2009-07-20 15:52] upgraded smc (1.8-1 -> 1.8-2)
[2009-07-20 15:52] upgraded source-highlight (3.1-1 -> 3.1-2)
[2009-07-20 15:52] warning: extracting /etc/sudoers as /etc/sudoers.pacnew
[2009-07-20 15:52] upgraded sudo (1.7.1-2 -> 1.7.2-1)
[2009-07-20 15:52] upgraded sunbird (0.9-1 -> 0.9-2)
[2009-07-20 15:52] upgraded swftools (0.9.0-1 -> 0.9.0-2)
[2009-07-20 15:52] upgraded syslog-ng (3.0.1-6 -> 3.0.3-1)
[2009-07-20 15:52] upgraded texlive-bin (2008-4 -> 2008-5)
[2009-07-20 15:52] upgraded tftp-hpa (5.0-2 -> 5.0-3)
[2009-07-20 15:52] upgraded thunar (1.0.1-1 -> 1.0.1-4)
[2009-07-20 15:53] upgraded thunderbird (2.0.0.21-1 -> 2.0.0.22-1)
[2009-07-20 15:53] upgraded tightvnc (1.3.10-1 -> 1.3.10-2)
[2009-07-20 15:53] upgraded transcode (1.1.0-5 -> 1.1.3-1)
[2009-07-20 15:53] upgraded transmission-gtk (1.60-1 -> 1.72-1)
[2009-07-20 15:53] upgraded usbutils (0.82-1 -> 0.84-1)
[2009-07-20 15:53] installed libmtp (0.3.7-1)
[2009-07-20 15:53] installed enca (1.9-4)
[2009-07-20 15:53] installed libass (0.9.6-2)
[2009-07-20 15:53] upgraded vlc (0.9.9a-5 -> 1.0.0-5)
[2009-07-20 15:53] upgraded xfce4-clipman-plugin (1.0.1-1 -> 1.0.2-1)
[2009-07-20 15:53] upgraded xfce4-power-manager (0.8.0-1 -> 0.8.2-1)
[2009-07-20 15:53] upgraded xine-ui (0.99.5-4 -> 0.99.5-5)
[2009-07-20 15:53] upgraded xmlrpc-c (1.06.33-1 -> 1.06.35-1)
[2009-07-20 15:53] upgraded xorg-server (1.6.1.901-3 -> 1.6.2-1)
[2009-07-20 15:53] upgraded xz-utils (4.999.8beta-3 -> 4.999.8beta-4)
[2009-07-20 16:08] upgraded codecs (20071007-4 -> 20071007-6)
[2009-07-20 16:09] upgraded muttprint (0.72d-8 -> 0.72d-9)
[2009-07-20 16:11] upgraded openvpn-dev (2.1_rc15-2 -> 2.1_rc18-2)
[2009-07-20 16:11] upgraded perl-xyne-arch (0.66-1 -> 0.68-2)
[2009-07-20 16:11] installed rpmextract (1.0-3)
[2009-07-20 16:14] Before using picasa you must accept the license.
[2009-07-20 16:14] The license files are located in /usr/share/licences/picasa/
[2009-07-20 16:14]
[2009-07-20 16:14] NOTE:
[2009-07-20 16:14] If you're not running gnome/kde please look at the hook files
[2009-07-20 16:14] located in /opt/picasa/info.
[2009-07-20 16:14] Edit them for your default filemanager/browser/email/mime-handling,
[2009-07-20 16:14] and copy them to /opt/picasa/bin.
[2009-07-20 16:14] If you're a gnome/kde user you should not modify these files.
[2009-07-20 16:14] Picasa will use your default DE settings.
[2009-07-20 16:14]
[2009-07-20 16:14] upgraded picasa-beta (3.0_5744.02-1 -> 3.0_5744.02-3)
[2009-07-20 16:14] upgraded powerpill (16.0-11 -> 16.0-12)
[2009-07-20 16:24] synchronizing package lists
[2009-07-20 16:24] starting full system upgrade
[2009-07-20 16:25] upgraded lib32-libgl (7.4.4-1 -> 7.5-1)
[2009-07-20 16:25] upgraded lib32-libpng (1.2.37-1 -> 1.2.38-1)
[2009-07-20 16:25] upgraded lib32-mesa (7.4.4-1 -> 7.5-1)
[2009-07-20 16:25] synchronizing package lists
[2009-07-20 16:25] starting full system upgrade
[2009-07-20 16:28] update desktop mime database... done
[2009-07-20 16:28] update desktop applications database... done
[2009-07-20 16:28] upgraded xaralx (0.7r1785-3 -> 0.7r1785-5)
any suggestions on how to get more info?
thanks
Last edited by webframp (2009-07-21 18:32:58)

That does appear to be my issue, I use jfs with no separate /boot
Edit:
The following steps fixed it:
Mount your / (and /boot partition into this mount) from your Ach system, ex:
sda2 (/) -> /mnt/arch
sda1 (/boot)(if you have a own /boot) -> /mnt/arch/boot
Do a chroot /mnt
and therein a:
pacman -U /var/cache/pacman/pkg/kernel26-2.6.30.1-1-x86_64.pkg.tar.gz (or i686)
further details at the link above.
Last edited by webframp (2009-07-21 18:32:14)

After Upgrade to Snow Leopard booting Stops at Apple sign plus spinning cir

I changes the harddrive in my mac Book pro (Late 2008). Before i had a fujitsu 400 gb harddrive. It was Slow, but it worked. Now i changed it into a hitachi travelstar 500 gb 7k500. Installing Leopard no problem. It worked just Fine. Then i installed the Upgrade to Snow Leopard and after restart it went until the apple sign with the spinnig Circle under it ( Grey screen). and the Circle keeps spinnig for hours and Snow Leopard won't start. Can someone Tell me what the problem is and what i can do about it. I read Lots of posts in other communities andit Sems as if thers had nö Problem with this hard drive but None Said if he had Snow leopard installed. I am starting to freak, because i can't figure it out.
Before the spinnig Circle there's another Odd Thing. The Grey screen with the Apple sign Shows up with Progress bar under it. I don't Know. Never had a Problem like hat before. Hope you can help me.
I just changed the harddrive, all hemother components of my Computer are original.
Tanks for your help

Thanks. Now I could back it up. It even booted. But now I have a new problem. The new hard drive is reallz faster than the old one. But Evers now and then the system just freezes. Not like when it was overworked before with the old system. No it completely freezes. You can just move the mouse then. But you can move windows, can't click on anything. This lasts about 30 seconds, then everything is normal. Is there a size maximum for a internal hard drive or cache max or a speed max. It makes go crazy.
But never the less. You first hit helped. Maybe you have another one.

QuickTime & Security upgrades--system will not boot

Hello. I'm new to the posting/discussion board world, and while I have reviewed other threads I haven't found anything yet to solve my problem.
Let me say that I am not sure of the particular OS version I am using (10.4.8 is a guess). Since I tried to install the QT/security update last weekend, my iMac gets to a point where something (either the hardrive or the fan, or both) are making considerable noise. The machine sounds like it's trying to take off.
Having browsed some other threads, I have done these things:
I booted the computer using my system installation disk; ran Disk Utilities; repaired the disk; and verified disk permissions. Initially, the repair-disk function did not succeed, but I have run it again and it indicated success. I have fixed disk permissions and verified them, again apparently successfully.
When I attempt to boot, the gray screen comes up but after approximately one minute a circle appears where the Apple ought to be and the harddrive/fan ramps up to take-off speed. Out of fear for the system I do not let this condition continue for more than a few minutes and I turn the machine off by pressing the power button for several seconds. It seems clear that it won't boot.
I have not been able to boot into safe mode, either, if that means holding down the shift key upon power up.
I am now lost as to what I can do without attempting to re-install OS X from the disk or seeking other professional help. I sincerely appreciate any assistance in this matter.
Aaron Fultz
Ames, Iowa

BDAqua,
My deepest appreciation for your assistance. Your solution seems to have worked and the system appears to be running as before.
If I may ask two follow-up questions:
1. If I ensure that the disk permissions are repaired/verified, can/should I go ahead and update my system with the 10.4.11 update?
2. Do I maintain the "previous system" file on my harddisk, or can I safely delete it?
Thanks again for your help and guidance. It was rather upsetting having my computer disabled like that. I've definitely learned from this.
Aaron

After upgrade System Apache can't start

Hi i work with php5, apache (default) and mysql on my MacBook Pro...
This weekend i have installed the last upgrade of system, but now my server apache don't start..
If i try to start/stop/restart apache from terminal i get this error:
cbmac:~ cbmac$ apachectl start
launchctl: CFURLWriteDataAndPropertiesToResource(/System/Library/LaunchDaemons/org.apache. httpd.plist) failed: -10
org.apache.httpd: Already loaded
cbmac:~ cbmac$ apachectl restart
launchctl: CFURLWriteDataAndPropertiesToResource(/System/Library/LaunchDaemons/org.apache. httpd.plist) failed: -10
cbmac:~ cbmac$ apachectl stop
launchctl: CFURLWriteDataAndPropertiesToResource(/System/Library/LaunchDaemons/org.apache. httpd.plist) failed: -10
the content of the file org.apache.httpd.plist is :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>org.apache.httpd</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/httpd</string>
<string>-D</string>
<string>FOREGROUND</string>
</array>
<key>SHAuthorizationRight</key>
<string>system.preferences</string>
</dict>
</plist>
I have already repaired the files permissions with Disk Utility, but without resolving the problem.
I don't know what to do, someone have idea?
Thanks in advance
Manza

I also have the same error:
http://discussions.apple.com/thread.jspa?messageID=9125362&#9125362
But may have found a solution here in this thread ( Comment by 'parndt' ):
http://discussions.apple.com/thread.jspa?messageID=8689266&#8689266
I havnt tried it yet, As I spent half of yesterday, formatting, then trying to compile Apache, php, mysql, openssl on on a seperate partition, but changing the Apache LAYOUT config, yet the mac wouldn't listen to my changes and kept trying to use the original broken version.
I am formatting now, and going to try on a clean install, so will let you know.
This is a good reference site:
http://diymacserver.com/

My Macbook has got very slow after upgrading + having truoble while booting

Please let me know what to do, first of all my macbook has slowed down a lot after i have upgraded to leapord. Secondly the big problem i am facing apart from the slow booting is that the login box does not come up when i first start my macbook. so i need to hold the power button and turn the macbook off and then turn on again and then it comes up. please help!

Please let me know what to do, first of all my macbook has slowed down a lot after i have upgraded to leapord. Secondly the big problem i am facing apart from the slow booting is that the login box does not come up when i first start my macbook. so i need to hold the power button and turn the macbook off and then turn on again and then it comes up. please help!

[Solved] After upgrading system/VIrtualbox kernels won't load

After running an update on my system and trying to use Virtualbox I recieve this:
============================================================
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (3.16.4-1-ARCH) or it failed to
load. Please reinstall the kernel module virtualbox-host-modules or
if you don't use our stock kernel compile the modules with
sudo dkms autoinstall
You will not be able to start VMs until this problem is fixed.
VBoxHeadless: Error -1908 in suplibOsInit!
VBoxHeadless: Kernel driver not installed
VBoxHeadless: Tip! Make sure the kernel module is loaded. It may also help to reinstall VirtualBox.
============================================================
I have tried to reinstall virtualbox and the kernels, I've manually reloaded my kernel modules, and I still have no luck.
Does anyone have any ideas?
Last edited by cynicalpsycho (2014-10-25 20:19:22)

Solution: Reboot system.... *Facepalm*

After upgrade , autoconfig failed in adsvcm.cmd

Hi ,
After i've finished the upgrade and started all the services , the concurrent manager service failed to start
i've run autoconfig on db tier , it went successfully but on apps tier failed during execution adsvcm.cmd
here is the error :
AutoConfig Services Phase
Running Service Process 4 of 9 for AD_TOP
Executing script in InstantiateFile:
D:\oracle\TEST\inst\apps\TEST_oratest2009\admin\install\adsvcm.cmd
script returned:
ECHO is off.
ECHO is off.
Sun 01/05/2014 11:05 AM
Enter the APPS Username/Password: adsvcm.cmd exiting with status 128
ERRORCODE = 128 ERRORCODE_END
.end std out.
.end err out.
and when i tried to run the script adsvcm.cmd manually
it resulted the error CCMSVC.EXE (this application failed to start because mfc80.dll was not found )
Actually im stuck and i dont know what should i do !!
OS : windows server 2003R2 SP1 (both apps tier and db tier )
DB : 10.2.0.4
Apps : 11.5.10.2 CU2 upgraded to 12.1.1

sorry for late on reply as i was on vacation .
i've done
$ adrelink.sh force=y link_debug=y "fnd FNDLIBR"
$ adrelink.sh force=y link_debug=y "fnd FNDCRM"
$ adrelink.sh force=y link_debug=y "fnd FNDSM"
all completed successfully without any resulted errors , but issue still the same .
and here is error log from windows event log
Event Type:    Error
Event Source:    Application Error
Event Category:    (100)
Event ID:    1000
Date:        1/8/2014
Time:        9:08:05 AM
User:        N/A
Computer:    ORATEST2009
Description:
Faulting application INVLIBR.exe, version 0.0.0.0, faulting module unknown, version 0.0.0.0, fault address 0x0103631c.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 49 4e 56   ure INV
0018: 4c 49 42 52 2e 65 78 65   LIBR.exe
0020: 20 30 2e 30 2e 30 2e 30    0.0.0.0
0028: 20 69 6e 20 75 6e 6b 6e    in unkn
0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
0038: 30 2e 30 20 61 74 20 6f   0.0 at o
0040: 66 66 73 65 74 20 30 31   ffset 01
0048: 30 33 36 33 31 63         03631c
regards
Ahmed

After upgrade system how to connect to itunes

Hi all, after i upgrade my IOS, system will authomatic ask to connect to itunes, but i try many way it also not working.
and my Ipad is now stuck on the screen as per file attachment, pls help me to solve it.
thx.

You are connecting the iPad to your computer, and you have the latest version of iTunes installed (and open) on that computer ? If your computer's iTunes isn't recognising that an iPad in recovery mode has been connected to it then see if these troubelshooting pages help :
PC : http://support.apple.com/kb/TS1538
Mac : http://support.apple.com/kb/TS1591

[SOLVED]system fails to boot since adding udev rules for automounting

Hello
I have recently been trying to use udev rules to automount, and putting together stuff from the wiki, forums and general googling around have produced the following set of rules:
# automounts usb hdd and pendrives as usbhd-sdx; no messing around with
# volume labels or other confusing stuff
# matches all sdx devices except the internal hdd, sda
KERNEL=="sd[b-z]", NAME="%k", SYMLINK+="usbhd-%k", GROUP="users", OPTIONS="last_rule"
# imports filesystem information
ACTION=="add", IMPORT{program}="/sbin/blkid -o udev -p %N"
# creates mount points and sets up symlinks
ACTION=="add", KERNEL=="sd[b-z][0-9]", SYMLINK+="usbhd-%k", GROUP="users", NAME="%k"
ACTION=="add", KERNEL=="sd[b-z][0-9]", RUN+="/bin/mkdir -p /media/usbhd-%k"
ACTION=="add", KERNEL=="sd[b-z][0-9]", RUN+="/bin/ln -s /media/usbhd-%k /mnt/usbhd-%k"
# global mount options
ACTION=="add", ENV{mount_options}="relatime"
# filesystem-specific mount options (777/666 dir/file perms for ntfs/vfat)
ACTION=="add", ENV{ID_FS_TYPE}=="vfat|ntfs", ENV{mount_options}="$env{mount_options},gid=100,dmask=000,fmask=111,utf8"
# automount ntfs filesystem with ntfs-3g driver
ACTION=="add", KERNEL=="sd[b-z][0-9]", ENV{ID_FS_TYPE}=="ntfs", RUN+="/bin/mount -t ntfs-3g -o %E{mount_options} /dev/%k /media/usbhd-%k", OPTIONS="last_r$
# automount all other file systems
ACTION=="add", KERNEL=="sd[b-z][0-9]", ENV{ID_FS_TYPE}!="ntfs", RUN+="/bin/mount -t auto -o %E{mount_options} /dev/%k /media/usbhd-%k", OPTIONS="last_rule"
# unmounts and removes the mount points
ACTION=="remove", KERNEL=="sd[b-z][0-9]", RUN+="/bin/rm -f /mnt/usbhd-%k"
ACTION=="remove", KERNEL=="sd[b-z][0-9]", RUN+="/bin/umount -l /media/usbhd-%k"
ACTION=="remove", KERNEL=="sd[b-z][0-9]", RUN+="/bin/rmdir /media/usbhd-%k", OPTIONS="last_rule"
This seemed to be working very well unitl I tried to boot this morning and the boot process stopped at "processing UDev events" with the following message:
iTCO_wdt: Unexpected close, not stopping watchdog!
It pauses at this point for 10-15 seconds and then reboots.
Having searched a bit, I found the following similar post on the forums: http://bbs.archlinux.org/viewtopic.php?pid=459375
Which suggests that the problem might lie with this line:
ACTION=="add", IMPORT{program}="/sbin/blkid -o udev -p %N"
I have renamed the file so that it no longer has the udev .rules extension and now the system boots fine. Does anyone have any suggestions as to why the above rules might be causing this behaviour and how I might go about fixing it?
Thanks
Last edited by useradded (2010-07-02 22:58:14)

Hey falconindy
That was the final kick up the logical a$$ that I needed to get some kind of grip on udev rules. I now have a fully functional rule that applies only to /dev/sdxy and not to everything else as well, so no more boot trauma, THANK YOU.
I will mark this thread as solved and post my new rule for the benefit of anyone who might read this.
New rule (no boot problems):
# automounts usb hdd and pendrives as label or as usbhd-sdxy if no label present
# ensures the following is _only_ run for sdxy devices excluding internal hdd, sda
KERNEL!="sd[b-z][0-9]", GOTO="personal_usb_automount_settings_end"
# imports filesystem information
# provides access to following variables:
# ID_FS_UUID; ID_FS_UUID_ENC; ID_FS_VERSION; ID_FS_TYPE; ID_FS_VERSION; ID_FS_LABEL
# accessible via ENV{variable}; $env{variable}|%E{variable}
IMPORT{program}="/sbin/blkid -o udev -p %N"
# Get a label if present, otherwise name usbhd-%k
ENV{ID_FS_LABEL}!="", ENV{dir_name}="%E{ID_FS_LABEL}"
ENV{ID_FS_LABEL}=="", ENV{dir_name}="usbhd-%k"
# creates mount points and sets up symlinks
ACTION=="add", SYMLINK+="%E{dir_name}", GROUP="users", NAME="%k"
ACTION=="add", RUN+="/bin/mkdir -p /media/%E{dir_name}"
ACTION=="add", RUN+="/bin/ln -s /media/%E{dir_name} /mnt/%E{dir_name}"
# global mount options
ACTION=="add", ENV{mount_options}="relatime"
# filesystem-specific mount options (777/666 dir/file perms for ntfs/vfat)
ACTION=="add", ENV{ID_FS_TYPE}=="vfat|ntfs", ENV{mount_options}="$env{mount_options},gid=100,dmask=000,fmask=111,utf8"
# automount ntfs filesystem with ntfs-3g driver
ACTION=="add", ENV{ID_FS_TYPE}=="ntfs", RUN+="/bin/mount -t ntfs-3g -o %E{mount_options} /dev/%k /media/%E{dir_name}", OPTIONS="last_rule"
# automount all other file systems
ACTION=="add",ENV{ID_FS_TYPE}!="ntfs", RUN+="/bin/mount -t auto -o %E{mount_options} /dev/%k /media/%E{dir_name}", OPTIONS="last_rule"
# unmounts and removes the mount points
ACTION=="remove", RUN+="/bin/rm -f /mnt/%E{dir_name}"
ACTION=="remove", RUN+="/bin/umount -l /media/%E{dir_name}"
ACTION=="remove", RUN+="/bin/rmdir /media/%E{dir_name}", OPTIONS="last_rule"
# exit
LABEL=="personal_usb_automount_settings_end"
Last edited by useradded (2010-07-02 22:59:20)

Time machine bug after upgrading system

Hello,
I just upgraded my macbook pro from Lion to Mountain Lion.
After this upgrade, I created a new admin account and tried to install back my previous account with my entire files thanks to migration assistant with a time machine data.
Unfortunately, it seems that my 150go of personal data are in my hard drive after time machine'work but I can see my last account with my entire file. I have just the choice to loggin to my new ML admin account. Moreover, I can use some application with this new account but the fact is that I can found my important files.
Do you have any solution in order to find my previous account?
Thank you,
Regards,
Niels.

See the pink box in Problems after using Migration Assistant for an explanation. One of the workarounds in the green box (probably #4) should set things right.

After upgrade System fail to boot

Similar Messages

Maybe you are looking for