After upgrade to 10.7.1 users can no longer connect to shares

Ok , im not an admin to start off, but after upgrading the OSX lion server to 10.7.1 i can no longer connect to the sharepoints on my mac mini server.
Through SMB or AFP .. i tried using the connect to server on one of my clients and when i attempt to log in , it shakes the login window as if my password were not accepted.
Heres where it gets a little confusing to me, i have 2 mac mini servers both running OSX LION SERVER 10.7.1 .... The one that I CAN NOT LOG INTO is my OD Master... the second one is just used for file sharing...
WHEN i attempt to login into the file share server (which is connected to the OD Master which is rejecting my user logins) i can connect JUST FINE and access the sharepoiints on that server...
A couple more weird things... on the OD MASTER (again the server which is rejecting all user logins) I CAN login with my admin credentials and access the sharepoints... ??
-- when i am locally logged into the OD MASTER server, if i add a new sharepoint from scratch and edit the ACL , NONE OF MY USERS SHOW UP nor any of my user groups... it only allows me to add the Administrator access to that share..
Have i done something very wrong somehwere? this server that is having a problem is only used as a OD master and File share nothing else..
I did not change any settings besides add a new mac mini server to the OD and performa the 10.7.1 upgrade.
ANY HELP WOULD BE HUGE as i have spent a 12 hours trying to figure this out before i resort to a re install.

I've only one hint to you, cause I've mot on Mac-Server.
With 10.7 Apple have switched from Samba (maybe due to licence problems with GPL based stuff) to a own protocol called "XSMB"
This had caused problems with some NAS systems too.
Eventually someone have a glue to solve that, as several users have problems with SMB shares since that.
Lupunus

Similar Messages

  • Windows user can no longer connect to my File Sharing IP address

    Hello,
    Since updating to OS X 10.4.9, Windows users can no longer connect to my file sharing IP address.
    I have had no problems when I was using 10.4.8, and I have re-checked both the Windows computer and my Mac to make sure that the file sharing connection should be possible.
    I think this may be some sort of firewall / security issue (?) in that the 10.4.9 update has downloaded something which now "hides" my Mac at this IP address. I am unsure how to resolve this problem.
    Does anyone have a suggestion? Much obliged, in advance.

    Can the Mac connect to the PC?
    Have you checked the Workgroup is the same on the Mac
    in Directory Access>CIS/SMB?
    Have you tried turning off the Firewall for a test?
    Has the IP changed?
    Hello!
    Thank you for the suggestive questions above. I haven't "tested" any of them because I simply became exasperated with the "change" in 10.4.9 and went back to system 10.4.8
    Of course, now everything is right with the world and I can once again have my Windows computer connect to my Mac.
    Thank you for taking the time in trying to help me -- much obliged.

  • When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi.  It gives me a message unable to search for WiFi.  Before the upgrade to Lion it worked fine.  What gives?

    When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi.  It gives me a message unable to search for WiFi.  Before the upgrade to Lion it worked fine.  What gives?

    Could there be a setting I need to adjust in the iPad2?  When I try to turn on WiFi and enter the name of the WiFi that I have established, including the security type and the password, I get the message "Could not scan for wireless networks."  Is there a setting in iCloud or other location that needs to be changed?

  • After upgrading to 10.5.3 I can no longer login to my RedHat ES4 shares

    Hello,
    I am a new Mac user so please forgive me if there is a simple answer to this question...
    Since I installed the 10.5.3 update over 10.5.2 I can no longer login/connect to my RH ES4 (SMB Version 3.0.10-1.4E) shares. I can still login to my CentOS 5 (SMB Version 3.0.25b-1.el5_1.4) and my older RedHat 7.3 (SMB Version 2.2.3a) shares, as well as a few windows shares, without any problem. It is just the RH ES4 shares that I can no longer connect to.
    For legacy purposes I configured SMB on both my MacBook Pro and the above mentioned servers to use plain text passwords. To do this on my MacBook this I created nsmb.conf in /etc which contains the following...
    [default]
    minauth=none
    Everything worked perfectly minutes before the upgrade to 10.5.3 and nothing else in the network, software or hardware, has changed.
    Any help would be greatly appreciated.
    Thanks,
    Tom Boilard

    Welcome to the forums... unfortunately SMB issues are not fully mainstream.
    Anyhow, I have scanned the change log of files touched by the update (searching for SMB - original list courtesy of Rixstep). This yielded:
    /Library/Preferences/SystemConfiguration/com.apple.smb.server.plist
    /private/etc/smb.conf
    /System/Library/CoreServices/SmbFileServer.bundle/Versions/A/Resources/DesktopDe faults.plist
    /System/Library/LaunchDaemons/com.apple.smb.server.preferences.plist
    /System/Library/LaunchDaemons/com.apple.smbfsloadkext.plist
    /System/Library/LaunchDaemons/smbd.plist
    /private/etc/smb.conf.template
    /System/Library/Extensions/smbfs.kext
    /System/Library/Extensions/smbfs.kext/Contents/CodeDirectory
    /System/Library/Extensions/smbfs.kext/Contents/CodeRequirements
    /System/Library/Extensions/smbfs.kext/Contents/CodeResources
    /System/Library/Extensions/smbfs.kext/Contents/CodeSignature
    /System/Library/Extensions/smbfs.kext/Contents/Info.plist
    /System/Library/Extensions/smbfs.kext/Contents/MacOS/smbfs
    /System/Library/Extensions/smbfs.kext/Contents/Resources/load_smbfs
    /System/Library/Extensions/smbfs.kext/Contents/version.plist
    /System/Library/Filesystems/smbfs.fs
    /System/Library/Filesystems/smbfs.fs/Contents
    /System/Library/Filesystems/smbfs.fs/Contents/Info.plist
    /System/Library/Filesystems/smbfs.fs/Contents/Resources
    /System/Library/Filesystems/smbfs.fs/Contents/Resources/English.lproj
    /System/Library/Filesystems/smbfs.fs/Contents/Resources/English.lproj/InfoPlist. strings
    /usr/lib/sasl2/smb_lm.so
    /usr/lib/sasl2/smb_nt.so
    /usr/lib/sasl2/smb_ntlmv2.so
    /private/var/db/smb.conf
    Items highlighted in bold could be relevant.
    Have you checked that your entry in nsmb.conf is intact? If it is, could it be overridden by a change to one of the other conf files (or a plist)?

  • After upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the   mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in or

    After yesterday upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the + mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in order to quickly add an address to an e-mail that I wish to send?
    Bob

    On the right of the To: field you will see a circled plus sign:
    Click it.

  • After upgrading to lion 10.7 I can no longer use my canoscan 9950f, why?

    After upgrading to lion 10.7 my canoscan 9950f scanner is no longer recognized. Have I lost thye use of this scanner by going to 10.7?

    Not likely. Make sure the scanner is still available in System Preferences > Print & Scan. You might have to delete the old scanner and add it again if your computer cannot "find" it.
    Before you do that, and while you are in Print & Scan, see if  you can get it to scan by selecting the Scan tab.
    In Lion, all scanning functions have been relegated to Preview, the Print & Scan preference pane, and Image Capture.

  • Depois de Atualizar para Mac 10.9 não consigo mais baixar Programas - Erro "hardware Gráfico "  (After Upgrading to Mac 10.9 I can no longer download Programs - Error "Hardware Graph" (

    Ola amigos
    Depois de atualizar para o sistema Mac OX 10.9 não consigo baixar programas e Games que tinha na versão anterior.
    Aparece um erro de " hardware Grafico não compativel"
    _____  Minha dúvida fica, porque antes eu comprei e baixo, e agora não baixa mais ?
    Alguem poderia ajudar ???
    my mac is Macbook Pro 5,2
    =============\\=============\\  in ingles     ==========================\\===============\\====================
    Hello friends
    After upgrading to Mac OX 10.9 system can not download programs and Games that had in the previous version.
    Appears an error of "hardware not compatible Grafico"
    _____ My question is, because before I bought and down, and now does not download anymore?
    Could someone help??

  • After upgrade to Firefox 6, certain sites can no longer be loaded.

    After upgrading from Firefox 5 to FF 6, certain sites will no longer load. These sites both use Typepad and that seems to be where FF6 hangs. Have not had this problem with FF5. Tried clearing cache, deleting bookmarks (to sites that won't load), and typing in address. That doesn't help. Sometimes, the sites load partly (i.e. with only words, no images); other times, load after a long time (several minutes); most often will not load at all.

    I've only one hint to you, cause I've mot on Mac-Server.
    With 10.7 Apple have switched from Samba (maybe due to licence problems with GPL based stuff) to a own protocol called "XSMB"
    This had caused problems with some NAS systems too.
    Eventually someone have a glue to solve that, as several users have problems with SMB shares since that.
    Lupunus

  • After upgrading to 8.0.2 I can no longer send mail

    After upgrading iPad mini to 8.0.2 I can no longer send mail, only receive. Error msg "the recipient was rejected by the server because it does not allow relaying". Have tried rebooting, also resetting network connections, still no good.

    Hi maxwell156, 
    Welcome to the Apple Support Communities!
    I know that using Mail on your iPad is very important and is frustrating when it doesn’t work as you would expect. In this situation, I recommend reading over and using the information provided in the attached article to help the troubleshooting process. 
    iOS: Troubleshooting Mail
    Have a great day, 
    Joe

  • HT4205 After upgrading my touch (5 gen) I can no longer find Known networks automatically. It says unable to join network

    After upgrading my Touch (5gen) to ios 7.0  it will no longer connect automatically to known networks.
    sometimes  it will and then disappear     Any help

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • After upgrade to IOS 8.3  iPad Air no longer connects to iTunes

    Today I upgraded my Macbook Air to Yosemite 10.3 and my iPad Air to IOS 8.3
    After upgrading the iPad I was asked to connect it via cable to iTunes in order to allow for wireless sync.
    When plugging the cable in, the iPad starts sending endless alert beeps and the top line of the screen is shaking. On iTunes the error message "iTunes could not connect to this iPhone. This device is no longer connected." appears with every alert beep from the iPAD. No matter how often the OK button is pressed, the message appears rightaway again.
    I made a full backup of the iPad Air before upgrading to IOS 8.3 but I am very reluctant to reset the iPad as the same error might come up when connecting the iPad after reset to iTunes and then I would not be able to restore it at all.
    Does anyone had a similar experience and/or is there any known workaround?
    Many Thanks for any suggestion.
    G.W

    Thanks for your further consideration, much apreciated. I tried a different cable, different port and did reboot and soft reset. I also did reset of settings on iPad, just in case.
    As  I can with no problems use the same USB cable and USB port with my iPhone to connect to iTunes, the issue must be somewhat with the iPad Air and iTunes on my Macbook Air. I also can connect the iPad with the same USB Cable to iTunes on a different Macbook with no issues.
    I think, best is to do a full backup on a different machine and then setting back the iPad to initial state, followed by a restore.
    This I can (hopefully successfully) do with iTunes on a different Macbook.
    Many thanks for you kind support.

  • After upgrading to 27.0.1, I can no longer access one secure site. I now get Error code: ssl_error_bad_mac_alert. This worked before the update.

    I am trying to access the GUI administration page of my wireless controller. It is using a cert issued by the vendor that makes it, so the names do not match. I have created a permanent exception for the certificate. Whenever I try to access the site, I now get the following error every time:
    Secure Connection Failed
    An error occurred during a connection to 172.24.6.10:4343. SSL peer reports incorrect Message Authentication Code. (Error code: ssl_error_bad_mac_alert)
    The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
    This page worked fine before the most recent update.
    Is there a setting or something I can change to allow this page to load?

    Thank you both for your suggestions. I had seen the possible solutions of time and ipv6, but those did not help. I cannot recycle the wireless controller, as that would disrupt my business's network too much.
    Cor-el, your answer was what worked for me. I went through each security.ssl3. setting like you suggested and found that
    security.ssl3.dhe_rsa_des_ede3_sha is where the error was coming from.
    With that one set to false, I was able to connect to the admin page again. When I set it back to true, the error comes back.
    I also found that specifically any one of the following were needed for teh connection to work as long as the one above was false.
    security.ssl3.rsa_aes_128_sha
    security.ssl3.rsa_aes_256_sha
    security.ssl3.rsa_des_ede3_sha
    so I am leaving the one that caused the error disabled and it is working again.
    Thanks!

  • After upgrading to Firefox 6.0 I can no longer get ANY youtube video to play. I already did the suggestion regarding my firewall.

    When I try to go on to the YouTube site I get a message from Firefox that says:
    ''''''''* * The connection has timed out
    * * The server at www.youtube.com is taking too long to respond.
    * * The site could be temporarily unavailable or too busy. Try again in a few
    * * moments.
    * * If you are unable to load any pages, check your computer's network connection.
    * * If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.''''''''
    I have already gone through the step you suggested to make sure Firefox is a trusted site with my security program, but nothing has changed.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Windows 7 Users Can No Longer Connect to Shared Xserve Drive

    We've had multiple computers (both PCs and Macs) setup to use a shared Xserve. All the sudden today the mapped network drives stopped working. I've tried using the "Map network drive" option on Windows 7 to add them manually again, but every time I enter the username/password it says it is not correct. I'm mapping the drive to Z and the folder to '\\10.10.10.77\shared' which is the Ethernet 1 of the Server followed by folder name on the Xserve that worked before. I'm confused what username and password it wants here because I've even reset the Xserve passwords and they still don't work and it says underneath that the Domain underneath is the name of the current PC user...
    What's going on here? Am I using the correct Folder format and with the correct username and password? This is driving me crazy!

    After hours and hours of constant searching and testing I still can't get it to work?
    Any ideas?
    I think sharing has changed in Mavericks.

  • Windows Users can no longer connect to Server

    I have an Xserve configured to share via AFP and windows. It is running Open Directory as an Open Directory master. It is connected to a Windows Network that is worldwide, running in a specific subnet and domain. Recently, all the users I have configured on the machine have been migrated to a new Active directory server for their email accounts. I can connect and authenticate against the open directory using AFP, but can not connect using windows file sharing from a Windows computer, nor can I connect using SMB from a mac. Shouldn't the users be authenticating against the Xserve when trying to connect or is it passing off the authentication to another server? Do I need to move the Xserve to the new domain? (in other words, do I have to change its FQDN? )
    thanks in advance,
    Mike
    XServe Dual 2GB G5   Mac OS X (10.3.4)   Windows Domain member

    I just had this same problem on my server. The only difference is it is an Xserve insted of a Mac Mini.
    I restarted the whole operating systems and that appeard to have fixed the problem but I do not know what I cause was.
    Did you figure anything out?

Maybe you are looking for

  • 2011 macbook pro 17 poor airport reception

    Howdy. I have a fairly new MB Pro 17" built in early 2011, details below: Model Name:          MacBook Pro   Model Identifier:          MacBookPro8,3   Processor Name:          Intel Core i7   Processor Speed:          2.3 GHz   Number of Processors:

  • What's the difference between restore from backup and restore to factory settings?

    I have just updated my iPad 2 to os 5.1. I backed it up in iTunes before beginning the download. Do I use the restore button to get my apps and files back? The prompt says it will restore the device to the factory settings. I assume this means the pr

  • SCCM 2012 R2 - Error when marking Service Request as Complete from remote console

    If I attempt to Complete a SR from a remote console I receive the following error. Marking as Complete from the console installed on the Management Server works as expected. Has anyone encountered this ? Date: 22/09/2014 18:37:18 Application: System

  • Multiple Views from "Identify Account" Navigation Bar

    I have created a navigation profile called "Identify Account" and is linked to my Weblcient Profile. However, for ease of use, I would like to have to Views (V1-Individuals and V2 - Organizations) sothat the user can have the option to search for Ind

  • Error connecting to the db while running the .jar

    Hi, i made an application using netbeans ide 4.1, and when i try to run the program with the .jar file i get this error java.lang.ClassNotFoundException: oracle/jdbc/driver/OracleDriver, but when i run the program using the ide it runs normally. I´m