After upgrade to 10041 problems with update

After I successfully updated to 10041 I now have a problem with an update. There is an update for an audio driver and the download worked well but after trying to install this update I get the message :  Realtek Semiconductor Corp. driver update for
Realtek High Definition Audio - Error 0x800705b4

Hey amuthan1983, it's
not working for me!!
I followed your steps (till Step 5) and then the update and installation of the driver started....but after
some time it shows me this:
I did it twice but it resulted in same.
Please help me I can't hear sounds on my PC!
Thanks,
Kvaibhav01.

Similar Messages

  • After reinstall to fix problems with update mobile devices still will not sync

    As many noted latest updated hosed iTunes. I followed instructions, deleting everything and re-instaling. iTunes will now play but will not sysc to iPod, Nano, iPad, or iPhone. Any suggestions?

    Try holding down CTRL as you launch iTunes to see if it will repair the drivers.
    Or try Cerbu's post here.
    Or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
    Please let us know which approach works for you...
    tt2

  • Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

    Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

    HELP! i can't get ANYTHING done in the new muse - keeps closing.  once it crashes - i can't get the file back open!
    i've lost all my work!
    from my desktop - when it stared happening was with the updated version:
    Logging in build 2014.2.1.10 started at: Mon Nov 03 13:36:38 2014
    ========================================
    [00:00:42.416] Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:success size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014 highestUID: 3548
    [00:01:03.898] Preparing to Save As over "\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse" exists: true
    [00:01:17.516] SaveAs complete for file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' file size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highest UID:3551
    Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:07 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:21 2014 UTC: Error: CSI: IMS: Connect: Error Code: I-200 Error Message: No Account
    Build 232: Mon Nov 3 19:41:21 2014 UTC: Unknown IMS error 'SHARED_NOACCT_ERROR' has occurred when retrieving IMS token.
    Build 232: Mon Nov 3 19:41:57 2014 UTC: Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version. size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014
    Build 232: Mon Nov 3 19:41:57 2014 UTC: This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version.
    Logging in build 2014.2.1.10 started at: Mon Nov 03 13:43:17 2014
    ========================================
    [00:00:21.481] Opening file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' with status:success size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highestUID: 3551
    [00:00:30.373] AssertInDebug: Unable to run recovery. User file remains locked after 5 second pause.-assertInDebugOnly+DataBase/recover+MuseSite$/recover+MethodInfo-2886+DataBase$/run Recovery+apply+UIComponent/callLaterDispatcher2+UIComponent/callLaterDispatcher+end stack
    [00:00:30.404] Failed to recover file:\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse
    [00:00:30.420] Calling openConnection for file that doesn't exist? C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ Parent folder exists.
    [00:00:34.429] open of SQL connection failed for C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ
    [00:00:34.429] Failed to open mini-save connection B "C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ" Doesn't exist. Folder exists. error:SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'
    [00:00:34.429] EXCEPTION:[SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'-SQLConnection/internalOpen+SQLConnection/open+DataBaseConnectionWrapper/o penConnection+MethodInfo-28954+EventDispatcher/dispatchEventFunction+EventDispatcher/dispa tchEvent+MethodInfo-28938+end stack
    [00:00:34.445] AlertAndExit because of: [SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'

  • Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

    Who can shed some light on my ongoing connection problem.
    After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
    I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
    So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
    I tried all things of resets and forgets. No result.
    I have been fondling with my Airport Extreme 5 , but that did not help much.
    This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
    I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
    Ideas anyone ?

    Yes I tried this manyfold. But did not work.  Reading on, I took Tesserac's advice. Shut down router and computer.
    Start router after 15 minutes and wait another 10 minutes before starting the computer.
    Et voila.... everything is back in working order,
    Regards form Curacao, Dutch Caribean.
    Pete van Linden

  • Sim problems- I updated my ipad2 to ios7 after that , iam facing problems with my sim, it showing no sim card after inserting sim. there is no prbolem with my sim.

    I updated my ipad2 to ios7 after that , iam facing problems with my sim, it showing no sim card after inserting sim. there is no prbolem with my sim.

    arun kumar chenna123 wrote:
    i have updated my iphone to ios4.1. after installation, it is showing as"The SIM card inserted in this iPhone does not appear to be supported. only compatible sim cards from a supported carrier may be used to activate iphone. Please insert the sim card that came with your iphone...."
    how to solve this problem. I don't have any sim cards that came with iphone.
    Please help out to solve this problem.
    It sounds like the phone was hacked or jailbroken, and updating it locked it to the original carrier. As it is not possible to update to any version other than the current one (5.1) the fact that you updated to 4.1 pretty much confirms the phone was hacked. There is no solution that you can get in an Apple forum.

  • Ipad will not start after problems with update to ios5

    Hi all,
    after some problems with update to ios 5 my ipad 2 will not start anymore...
    in itunes it is not visible - So restore is not possible... :-(((
    there are only "reboots" on the ipad screen...
    thank you for help....

    Nothing works...
    It is still the same since 7 hours :
    apple logo appears then an empty progress bar and after that the spinning wheel for about 5 minutes...
    apple logo appears then an empty progress bar and after that the spinning wheel for about 5 minutes...
    apple logo appears then an empty progress bar and after that the spinning wheel for about 5 minutes...
    and so on...
    No chance to switch of the ipad...
    No connection to itunes possible (Laptop and Dektop PC)
    after several resets it's the same problem..........
    ipad 2 | 32gb | WLan + GSM

  • Y510p and problem with Update Nvidia Driver

    Hi everyonei have problem with updating my y510p lenovo laptop nvidia driver ,my current nvidia driver version is 327.62 which i download from lenovo website,Now for better performance in new games like gta v and witcher3 ,i decide to updating nvidia driver,first remove my nvidia graphic driver from add or remove then download nvidia ver 350 from nvidia official web site , which nvidia website confirm it support my graphic card which is Gt755m , then i install new ver and during install i check clean install , after successful install , restart laptop , then there was problem . when i try to open nvidia control panel it wont running and an error showed up and said "You are not currently using a display attached to an NVIDIA GPU" .i try to open a game , game running in really low fps and i find out game run on hd graphic of my laptop and my nvidia graphic wont run .The only way to repair was i install my last nvidia driver 327.62 and run a system restore .guys what is your suggestion and how i can update my y510p nvidia driver ?Thanks   

    Hi Y510Man,
         The video graphics installation order is important. You need to install the Intel Graphics first, and then do the Nvidia. IIRC you should un-install the Nvidia driver, then re-install (or upgrade) the Intel HD Graphics driver. Reboot, and install the new Nvidia driver.
         I don't know why, but every time I upgraded my Y470 Nvidia driver, I had to use this procedure. First install, or re-install, the Intel driver, then install the Nvidia. You can't just upgrade the Nvidia driver without a re-install of the Intel. I think it has to do with the Optimus setting, and the automatic switching.
        Let us know how it goes.
    Cheers
    DragonRider

  • Problems with updating files in the cloud

    problems with updating files in the cloud

    What kind of problems?
    Have you recently upgraded to iCloud Drive on your iOS devices with iOS 8?
    Be aware, be careful, be prepared for iCloud Drive | TUAW: Apple news, reviews and how-tos since 2004

  • Problem with update SCCM client to Sp1 CU3 on Windows 2008 server

    Hi all,
    I have problem with update SCCM client on Windows 2008 Server to 2012 Sp1 CU3. I have sent to deployment package with update (SP1 Cumulative Update 3 - server update) on four servers and after few minutes I have got in Monitoring\Deployment details four
    this same errors in "Asset Details":
    USER Message ID
    Status type Description
    NT\AUTHORITY\SYSTEM  1006
    Error 3003
    I love that types of error... which is har to find answer on google :-( I have tried but I haven't find any constructive :-( Did you met with something similar? Which log I should check (sorry - I'm still noob in SCCM2012) to update actual SCCM Client SP1
    (5.00.7804.1000) to SP1 CU3 (5.00.7804.1400)? 
    Thank you.

    I see in fodler with CU3 updates, are four packages:
    - SP1 Cumulative update 3 - x64 client update
    - SP1 Cumulative update 3 - x86 client update
    - SP1 Cumulative update 3 - server update 
    - SP1 Cumulative update 3 - console update
    It will be stupid but... maybe I should deploy x64 client update package? 

  • Problems with updating my ipod

    I own the ipod with click wheel (20 GB) and since i updated itunes and the software on the ipod i have problems with updating
    when in connect my ipod to my windows pc it says i should not connct on both itunes and ipod but after at least 2 mins the ipod just connects, itunes still say its still updating and i can't disconnect the ipod from itunes
    i reinstalled the software on my ipod and now the same thing happens, but absolutely no songs being transfered...before it just stopped at 1800 songs...nothing happened
    i kinda suppose its because of my usb drive, it's too slow, but it worked fine before...
    what should i do??? it's pretty frustrating
    M9282LL   Windows 2000  

    Sorry, my fault...
    i wanted to say, the ipod just disconnects itself from the pc...usually there's the sign on it "Do not disconnect" when its updating, but now it just goes back to the menu, while itunes is still updating, at least it say. In the end there are no songs at all copied on the ipod...
    hope this is understandable...

  • After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

    After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
    iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

    columbus new boy wrote:
    How crap is that?
    It's not crap at all.
    It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
    There has to be a solution.
    Why not simply make a playlist with the songs you want on the iPhone?
    and maintain a current backup of your computer.

  • Problem with updating the PC Updater software

    Good evening (from Germany). I have a problem with updating my Nokia Software Updater. I can download the setup and I can execute this. But when the installation starts (0%) a error message appears. It's a problem with Windows Installer but I don't know how to solve the problem. Here is a picture with the exactly error message:
    http://img-up.net/?up=Nokia_probES8HJXXg.jpg
    I hope somebody knows the anser with this software...
    Greetings
    OS: Windows XP SP2
    Phone: Nokia 3110 classic Firmware: V 5.50
    Message Edited by dernamenlose on 24-Apr-2008 08:56 PM

    Good morning (from Denmark).
    I hve the same problem.
    OS: WinXP SP2
    Phone: N73.
    Greetings.

  • HT201210 nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and somet

    nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and sometime just hear from other user that it 's difficult to use then force they change phone that use to handle to another.

    It is a feature to discourage the theft of iPhones by making them useless if resold. It's not going anywhere. It's simple: just don't buy a phone until you make sure that the activation lock has been disabled.

  • Adobe Photoshop Elements Problem with update 9.0.3

    Problem with updates Elements 9.0.3
    Message title was edited by: Brett N

    Then follow the rest of the directions here:
    Error "Patch cannot be applied" | Photoshop Elements 9.0.3 update | Windows
    http://helpx.adobe.com/photoshop-elements/kb/error-patch-cannot-applied-photoshop.html

  • Problem with update Photoshop, Illustrator and Indesign CS6

    Hi all. I have problem with update Photoshop, Illustrator and Indesign CS6 on OSx 10.8.4. Application are OK but update (bug fixies) not working. Update failed. (U44M1P7)

    Hi El Gondo,
    The following might explain and help solve the problem...
    U44M1P7 - Updates :
    http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html
    U44M1P7, U44M2P7 - Creative Cloud Help / Can't apply Extension Manager update 6.0.2 | Mac OS :
    http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manage r-update.html
    Thanks!
    Ankit

Maybe you are looking for

  • Not getting updating in a table....

    Hi friends, Currently i working on integration of apex with ebs R12.....And i have successfully integrated following the rod west document.... I created one DB application in my sample schema that is associated with apex 4.0..... Application details:

  • How to get details about Exception catched in Exception branch of the Block

    Hello Experts, Is it possible to get details about Exception catched in Exception branch of the Block in Integration Process (BPM)? In the Exception branch System Error is catched, but from time to time different type of System Errors are happening d

  • How do I send attachments by email from my iPad

    How do I send attachments by email from my iPad

  • System Parameter - Destype

    Hi, I'm making a report in 6i. I have user parameters in my parameter form and I have added the system parameter 'destype' in my parameter form. I want to write a code so that when I choose 'File' in my destype, it should print it out as a txt file i

  • Name of data_dictionary table that holds...

    oracle dudes...does anyone know the name of the data_dictionary view that holds the name of the column of a table and indicates if it is a primary key or not? much appreciated satnam