After upgrade to 22.0 when sidebar is open, some pages no longer fit in window like in version 19.
After seeing suggestions I tried adjusting the about.config CSS setting from -1 to 1, etc. But this just changes the size of all pages. Not a fix because some pages are okay to begin with, so they don't need shrinking. All Pages seem to fit until I open the bookmark sidebar. Then about half of the pages I visit (facebook for example) don't fit on the page & I have to scroll back & forth horizontally to read them. Other pages (http://www.ric.edu/ for example) fit the window perfectly.
If web pages needs to be adjusted after changing this pref then you can look at the Default FullZoom Level or NoSquint extension.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
Use this extension to adjust the font size for the user interface:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/
Similar Messages
-
After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2. After clicking the download button, the screen just turns dark and is frozen. Any idea what is happening?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
After upgrade to ios7.0 , I can not open my phone
iphone 4s ------after upgrade to ios 7.0 , can not open my iphone , because it need me to enter the open iphone passcode , but I did not set up open passcode before? strange ?? now can not use my iphone , urgent ! how to solve it . how to open iphone ? (once set up passcode when use ios6.0 but cancel it long time ago. I bought it in USA. and before upgrade , it works well ) . pls kindly help !!
Hi unlac,
Thanks for using Apple Support Communities. This article has steps to use when you are unable to unlock your iPhone:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
- Ari -
After upgrading to IOS 5 on my iPad only some books in iBooks show content. They were fine before the upgrade. I made a new version of the book in Pages and reinstalled them on the iPad. Still nothing. What is the fix?
I just got the iBooks update and that fixed the problem, except the book covers look like they were done in a government printing office.
-
After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading. I have no special software like numbers or anything else installed on either device. Just using the default viewer provided by apple for viewing email.
The attachment is an .xls excel 97-2003 spreadsheet. I viewed the file in the email and did not edit it with any software. I can forward the file to anyone that is may want to check it out to see if they can help me. I was wondering if there was some way of forcing another ios6 install on my phone and maybe that would solve it.
Is there anyone out there that is viewing .xls files in email using ios6 w/o any other software installed like numbers or any other add ons? I am not upgrading my ipad from ios5 to ios6 so I can still continue to view the emails on my ipad. Is there an email viewer .xls plug-in that will be availablle in the next ios6 update? -
Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden -
After upgrading to OS Mountain Lion my separate mailboxes under Gmail no longer appear on the screen. How can I view them? They are still there because I tried to set up another mailbox with the same name & couldn't "because it already exists".
Move your cursor down slowly to the right of the Gmail Mailbox and it should say show or hide.
-
HT4528 after upgrading to IOS 7.1 the camera on my 5s no longer works
after upgrading to IOS 7.1 the camera on my 5s no longer works. Prior to the upgrade, I had no issues with the camera
Hi JoieC,
If you are having issues with the camera on your iPhone after a recent update, you may find the Camera troubleshooting portion of the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
- Brenden -
Question
After upgrading to FF 4.0, I'm getting many advertisements popping up in separate windows apparently triggered by my navigating around websited. FF pop up blocker is on, and I so no further options to prevent these ads.http://kb.mozillazine.org/Popups_not_blocked
-
I have an iphone and after upgrading it`s system i can not open videos now.Please help me
Trash the prefs in the preferences folder.
Important Directories
Mylenium -
Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears:
"The licensing of the product does not work"
Fault 6
How should I proceed?
Have the program installed on only one computer.Download the Adobe Licensing Repair Tool.
Run the License Service Update.
Mac OS X 10.7 and above:
a. Double-click the LicenseRecovery111.dmg It will extract the folder. Open the folder.
b. Double-click your Hard Drive.
c. Double-click Applications.
d. Double-click Utilities.
e. Double-click Terminal.
f. Type sudo python
Note: There is a space following “python”. Do not press Return.
g. Drag LicenseRecover.py from the LicenseRecovery111 folder onto the Terminal Window and press Return.
It should look like this:
h. Enter your administrator user name and password when prompted and click OK.
(Note: the cursor will not move and you will not see stars or dots, just enter your password anyway.
i. Let the script run, it will tell you when it is finished. Quit terminal and restart Photoshop
Gene -
Hi there,
After upgrading to Firefox 8 for mac osx I am unable to close a browser window using command w, or command shift w?
Is there any way I can correct this as it is very annoying?
Cheers
Guy
imac 2.93 GHz Intel Core i7
osx 10.6.8It only happens for me on pages where I've allowed some Flash element to play (I have Flashblocker) such as a YouTube video.
-
Firefox crashing when i wanna open or close a tab or a window, also while wanna open any page, now what to do for solving the problem?
Disable McAfee siteadvisor and check the problem still persist or not?
-
I cant seem to open some photos on Iphoto. I downloaded like 3 months ago from my phone into the iphoto. I could access ALL of my photos back then but when I try and access them now I cant seem to open the file. When i open iphoto and open the folder thats on it, i can see ALL the photos that are there but when I click on different ones some appear in the larger screen but A LOT of them dont appear. Iphoto seems to have erased the file or I dont know.
Also I tried clicking on the photo that doesnt appear and making it "Reveal it on finder" - "original file" and it says 'The operation can’t be completed because the item can’t be found.".
I really want those photos because they involve a really special family vacation, please help me find those photosA LOT of them dont appear.
What do you see in the window when you click on those? A blank, black window? An exclamation mark? What?
Maybe you are looking for
-
How to create a inline message for report region...
Hi, Can any one pls tell me the document link for to create a inline error message for report region? im trying to do a dynamic validation for report region.i've manually created a report region with apex item. im searching it for long time, im cant
-
I keep on getting Kernel panic approximately every four days. THis is the panic log. Any input will be helpful. I tried running HW Test .. It works fine This is my hardware configuration *Hardware Overview:* Model Name: Mac Pro Model Identifier: MacP
-
Mail and iPhoto integration not working
Very frustrating! I am using OS 10.4.5, iPhoto 5.0.4 and Mail 2.0.7. When I select a picture on a slideshow in Mail to send to iPhoto, it looks like it's being sucked up and iPhoto opens but the picture does not appear in the Library of the iPhoto ap
-
How do I use Windows Vista with Lion?
Hi - I wonder if you can help. I want to use a copy of Windows Vista I have through Bootcamp but have recently upgraded to OS X Lion. I understand Snow Leopard supported Vista and if I had installed Vista prior to upgrading it would continue to work
-
Maximum characters allowed in Edit Box, how to set?
I have an Edit Box in a screen designed using screen painter. I want to restrict the user not to type more than 20 characters. Is there any properties available in the Edit Box, like set max length = 20 ? BTW i am using 2004.2B