After Upgrade to 3.1 Packages are not displaying correctly.

Upgraded to 3.1 today and now when I try to view the doclib package body under HOME\SQL WORKSHOP\Object Browser the htp.p code from within the package is displayed in large font above the edit window. If I scroll down in the edit window the code stops where the htp.p commands start.
I tried adjusting my browser font settings, deleted cookies, etc. Nothing seems to work. Strange.
I'm running IE version 6.0. Any hints would be helpful. Thanks in advance. ~Elizabeth

I started using TOAD to make code changes to the packages. It has something to do with IE, I can view the code just fine in Firefox. I just wanted to close this thread. Elizabeth

Similar Messages

Permissions are not displaying correctly on Yosemite server

My file and folder permissions are not displaying correctly on my Yosemite server when viewed from a Yosemite client.
I have set these permissions from the server app on the server and have added local network groups for the appropriate folders on the share. When checked from the server's finder, everything looks correct. The server is setup for both AFP and SMB on file sharing. I have also tried setting permissions from the server's finder and seemed to make no difference.
When logged into from local or VPN Yosemite clients using AFP, the permissions do not show anything but postgres user and everyone group. Even though they should have network groups such as skoogfinancial, skoogmarketing, etc.
The server does seem to enforce the permissions correctly though a user cannot get into folders he does not have permissions for.
Therefore, it seems the server is enforcing correctly, but a user may not understand what is going on as the permissions list doesn't list anything meaningful.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Umlauts are not displayed correctly in different programs

Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)

Did you check the locale settings on your Windows machine?

Search for member activities - points are not displayed correctly

Hi experts,
I have a question concerning the search for member activities. I personalized my result list and added the field points (STRUCT.Product_ID), but there the amount of the points is always displayed as zero. When going into the details of the member activity I can see that there are points booked.
Can anyone tell me why the points in the result list are not displayed correctly?
Thanks and best regards
Anne

Sometimes threads are deleted if they violate the Rules of Engagement. If that happens, you'll lose points that were allocated to you. Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this. I'd guess, it's more likely you'd responded to a post that broke the rules.
Really important
1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable).
2. Don't ignore rejection emails or other communications from moderators. They are followed up, and, if warnings are ignored, then accounts will be deleted. Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
matt

Entity Descriptions are not displayed correctly in Combo box dropdown list

In Web Analysis, Entity Descriptions are not displayed correctly in Combo box dropdown list when entity descriptions from HFM contains a dot(.)
Example:
'Entity A. LTD' becomes 'LTD'
'Entity B Inc.' becomes blank
It seems that everything before the dot is not displayed when opening the combobox.
It looks like it is acting like the option to show short description for entities in HR where the parent-child relation is not shown. This behaviour I don't expect for descriptions. And in my opinion is not an option in Web Analysis.
Does anybody knows the sollution or have seen this issue before?

Hi,
This is a known issue with combo box list of values.
Please follow this workaround:
- Remove ComboboxLOV on Deptno
- Create an updateable transient attribute(Say Dname) of type String
- Define combobox lov with following values:
List Data Source: DeptView1
List Attribute: Dname
List Return Values:
Dname - Dname
Deptno - Deptno
UI Hints: Display Attribute - Dname
- Edit Dname(transient attribute) and provide following groovy expression
oracle.jbo.Key key = new oracle.jbo.Key(Deptno);
return DeptView1.findByKey(key, 1)[0].getAttribute("Dname");- Now, you are done and observe that Dname combo box lov shows Description even on selection and change in this combo box sets the Deptno value
Sireesha

Thumbnails are not displayed correctly in Firefox, but displayed correctly in Safari and G. Chrome

Firefox display problems regarding this customers site:
http://gardenia.dk/collections/collection/
Thumbnails are not displayed correctly in Firefox - only a tiny bit of the picture is visible, incorrect scale (displayed correctly in Safari and Google Chrome).
Can I do anything to make it work in Firefox, too?
Kind regards,
Annette

This article might help you-
https://support.mozilla.org/en-US/kb/websites-look-wrong-or-appear-differently

The Forms are not displaying correctly

the Forms are not displaying correctly. Editing mode and printing mode are missing contents of notes/text field (Additional Notes, Background or Need, Project Summary). Second issue is when viewing/printing a Project Profile - Short Form, the text fields
are shrink, they are not displayed full high to show all the text. It was working with IE9, IE10, but now IE10 and IE11 dont work.

tested with Google Chrome and that seems to work the best in terms of viewing and printing the forms.
Then you could try spoofing Google Chrome using a User-Agent string override and Document mode Edge. Or open IECompatData.xml to see if you should have Compatibility View enabling Microsoft's list. Or report your problem symptom and
desired override here:
http://www.modern.ie/report-compat-problem
Ref:
http://msdn.microsoft.com/en-us/library/gg699485(v=VS.85).aspx
Robert Aldwinckle

With IE UIX buttons are not displayed correctly

Hello there,
We have developed an application using UIX. While browsing application using Internet Explorer I noticed that many of the buttons are not displayed correctly. Only some part of the button is displayed. Same thing happens while displaying some of the page logos and stuff. Did anyone have same problem? What's solution?
Thanks,

Hi Andy,
sometimes half of button is displayed and sometimes the whole button image is distorted. if you refresh the page, it becomes perfectly fine. sometimes nothing is displayed but if you put mouse at the place where there should be a button, you would know that there is a button...
it happens with random buttons...
i haven't seen this problem in mozilla. its quite frequent in IE.
our customer is very annoyed by this problem :(

Scientific fluorescence figures are not displayed correctly on iPad

I use the iPad 1 for reading scientific papers, and I figured out that some fluorescence figures are not displayed correctly. The colours are not correctly distinguished, even some colours are completely missing. Is this a limitation of the iPad display or the current version of iOS.
I am really disappointed. So, is there any solution?
Many thanks.
On MacBook Pro
On iPad 1

I am woundering if anyone can suggest any solution? Thank you.

Webpages are not display correctly

Hello,
my problem is webpages are not shown correctly you can see in images
i use chrome Version 41.0.2272.118 dev-m it is shown correctly after certain refreshes please help me this is very irritating.

Hello,
Thank you for posting in the HP Support Forum.
Is this only happening with the HP forum site or with many web-sites ?
Can you try with different browsers - IE, Firefox ?
Please, re-install Chrome and install/run the latest stable Chrome release:
http://www.wikihow.com/Reinstall-Google-Chrome
http://googlechromereleases.blogspot.com/2015/04/stable-channel-update.html
Google uses Windows internal settings for Internet. These instructions refer to IE but will also affect some Chrome settings. Please, follow them:
https://support.microsoft.com/en-us/kb/923737
If the above does not help, please check with your ISP (Internet service provider) about DNS issues and your DNS settings or any other issues.
Check with your antivirus software or firewall (disable protection, disable web-protection, disable firewall or IPS protections and test)
Best wishes,
IT_WinSec
Hewlett-Packard employee | HP Enterprise Services
Although I work for HP, I express my personal opinion.
Visit www.hp.com/makeitmatter
--Say "Thanks" by clicking the Kudos Thumb Up in the post that you find useful.
--Please mark the post that solves your problem as "Accepted Solution"

Vietnamese fonts are not displayed correctly.

The Vietnamese input program worked fine in the previous version but in version 4 the texts are not aligned correctly. See this http://i485.photobucket.com/albums/rr219/september17th/untitled-16.jpg
The character set used is Composite Unicode and input method is VNI. I tried VN forum but no one care about it =.= Also this is the FF problem those texts displayed correctly in Chrome. Those posts are here http://www.tinhte.vn/tin-tuc-su-kien-10/hp-va-dell-cong-khai-chi-trich-ipad-2-cua-apple-644640/index15.html

I also have this problem, hope this problem will be fixed in the next release. More info: http://vozforums.com/showpost.php?p=28008790&postcount=61

Wordpress sites are not displaying correctly on my mac after mountain lion upgrade (on all browsers - chrome, safari, firefox)

I am having trouble viewing anything that is on wordpress, including the wordpress site. This means I cannot view my own wordpress blog too properly - no images are viewable, only plain text and hyperlinked text. This happened immediately after I upgraded to Mountain Lion. My Mac is mid-2010. Everything else works fine. Thanks.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

We have an openerp server with webclient, after upgrade of firefox some icons are not oppening submenus as it used to be, while they are still working on internet explorer 8

We have an ERP application(openerp), where the web client was working very fine.
After one of the upgrades of firefox, some of the icons on the web page that should open a sub-page for selection of items in the main page are not working any more. We click on them, yet no response
I donwloaded the fidler and it record any request sent from the PC when clicking those icons.
I tired internet explorer 8 and the icons are working, so it is not a server side problem

Hi,
There're some "known issuees" with some updates, as described in the following KB:
http://support.microsoft.com/kb/2962872/en-us
I would suggest install the update below which might solve the IE crash issue
http://support.microsoft.com/kb/2977629/en-us
Yolanda Zhu
TechNet Community Support

After upgrading my ipad2 my apps are not working

I have recently upgraded my IPAD 2 after a long time.. but,after upgrade apps are not working!!!

Na!!! I restored factory settings.. now not able to copy aaps from itunes to IPAD

After upgrade to mavericks usb devices are not recognised?

After upgrade from Mountain Lion 10.8.2 to Mavericks external USB speakers do not work and HP Inkjet USB printer is not recognised in control panel.
Pls advise on fault finding solutions
Best regards
Sergey

Back up all data.
In the iCloud preference pane, uncheck the box marked Calendars & Reminders if it's checked. You may get an alert that one or more calendars will be deleted from your computer. Confirm. The calendars won't be deleted from iCloud. Leave the preference pane open.
Quit Reminders if it's running, and also quit Calendar or iCal.
Triple-click the line below on this page to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
If you unchecked the box in the iCloud preference pane, check it again and close the preference pane.
Launch Reminders and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

After Upgrade to 3.1 Packages are not displaying correctly.

Similar Messages

Maybe you are looking for