After upgrade to 5.0.1, BB 8530 sits on "working"

The Blackberry 8530 worked fine. I could backup and everything. And then a few days after upgrading to 5.0.1, the Desktop Manager says "Working" at the top and doesn't change. The BB is not locked and no passwords are being asked on either screen; it's just showing the two pictures with arrows on the blackberry. Going to pull out 5.0.1 and install 5.0 right now and see if that helps.
Any ideas?

Hello,
I suggest a clean start over the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista/Win7, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
Some have reported that there are more registry keys to remove than are discussed in that KB
Others have reported the use of a registry cleansing tool to also be helpful
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchronizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
7) Start the organizer configuration over:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

After upgrading to Lion can't get Boot Camp to work! Just get "startup dusk cannot be portioned or restored to a single partition"?

After upgrading to Lion can't get Boot Camp to work! Just get "The startup disk cannot be partitioned or restored to a single partition". Anytone?

This message, and threads like yours got asked daily for over two years, now it is only a couple times a week!!
Is it so hard to follow through? you were to have backup already, clones are best, then erase/format and restore.
Then partition.
Some have been able to use Disk Utility booted from OS X DVD or another drive, and repair the drive.
You have to use Boot Camp Assistant (99.9% anyway) to create and achieve a proper Windows Master Boot Record partition.

After upgrade to FCPX 10.1, paste attributes no longer works. Has any one had a similar experience or have an answer?

After upgrade to FCPX 10.1, paste attributes no longer works. Has anyone had this issue or have an answer to it?

Are you sure it does not work at all? Could be a problem with a particular project, or clip.
Create a completely new project, add some clips to it, Cmd-C in one clip, and try Paste Atributes into another. Does it not work?
Also, by "does not work" do you mean it is greyed out, or the window appears but nothing happens when you click "Paste"?

After upgrading to Mavericks, F14/F15 brightness adjustments don't work

After upgrading to Mavericks, F14/F15 brightness adjustments don't work. The screen appears to be "locked" at the dimmest brightness level. How do I adjust the brightness?

I am home now and I just confirmed that I have a brightness control slide in my Sys Pre---> Display. However, this for my Apple Cinema display. When I was using another name brand, this wasn't available to me. Nor could I use F1 and F2.
I also went to Sys Pre---> Keyboard---> Shortcuts---> Display---> Changed those values to F5 and F6, since they were free for me. And they were able to change the brightness for me. Went to test them, and I was just given that error chim and nothing on the display changed.
So I went on down the list... Accessibility---> checked Contrast and changed those to F5 and F6. Ahhh, now I can change that. Now I know that I can use the F5 and F6 for something.
I know that you are talking about brightness, but double check the Contrast settings to see if you were mistaking the two. After years of setting my TV with Video Essentials, I still get the two mixed up from time to time.
KOT

After upgrade my iphone 4 to IOS6, sound doesn't work correctly

After upgrade my iphone 4 to IOS6, sound doesn't work correctly.
During a phone call, there is no sound. But if I turn on the speaker, there is sound. itune works fine since it's on the speaker.

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

After upgrading from it6 to itunes7 my videos doesn´t work

After upgrading from itunes6 to itunes7 my videos doesn´t work. Theres no error message, no reaction. all the music play like befor, only my vids (quicktime), all!! the vids doesnt work after updating..i hope, that someone could help me..
Many thanks
Cross

hmmmm. let's try checking to see if they will still play in your current version of QuickTime.
in itunes, right-click on one of the videos that is causing the grief, and select "Show in Windows Explorer".
right click the icon of the file in the Explorer window that comes up and select "Open With ...", and try to open it with your QuickTime player. does it play there or do you get funny business with that too?

After upgrading to OSX Mavericks my BT peripherals temporarily stop working

I have a MacBook Pro 2009 with 4GB Ram, my only BT peripherals are a Logitech BT keyboard and Apple Magic Mouse. After upgrading to OSX Mavericks the day of it's release the overall performance of my MacBook was increased and I was/am very happy with it. My major gripe/annoyance is that upon opening a new application BT connectivity is totally lost and I have to revert back to my MacBook's keyboard and touchpad for a few seconds before BT comes back, and when it comes back it works flawlessly until I open another app or switch between certain apps. This issue is new since the OSX Mavericks upgrade, and my hardware setup has remained unchaged from day 1. It sounds like a software issue, and I was wondering if anyone else has had the same problem or has discovered a solution. I have cycled power on the machine, and have left it completely off for 24 hrs before booting it back up with the same issue. This isn't major, just annoying. The only other thing I have is with Mail and my GMail account seeming not to sync up correctly. Messeges archived on my iPhone 4S still show as unread on my Mail app even hours after the archive and both devices on the same wireless network, This never happened before the upgrade to OSX Mavericks... Everything used to sync up perfectly... Anyone have any ideas as to what may be going on??? Thanks!!

Thanks Barry!!! I only reset the SMC and after booting up the system, bluetooth has maintained connectivity after switching between apps, open/closing apps works just as before!!! Thanks again!!! I can't believe such a simple work around would fix such an annoying issue. BTW I didn't reset PRAM, didn't see the need to because everything works just fine now. If I could only get the Mail app to correctly sync up I'd be perfect!

After upgrading to OS 7.1.1 Maps no longer works correctly. It is constantly "locating" and does not do real time updating. Tried "Scout" map app it does the same thing. Do I have something not properly set up for viewing Maps the way I used top?

After upgrading my iphone 4s to 7.1.1 the Maps application does not work properly. It updates very slowly and is constantly "locating". Why is this happening after the upgrade? I also tried SCOUT App it is does the same thing. It seems like it is losing the GPS position. Is there a fix for this?

Any change after turning Airplane mode off and on and/or or after turning Location Services off and back on?
If not, any change after doing a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?

After upgrade to 4.1 connection to radio doesn't work

My car radio has a usb connection to my Iphone 4 and it allows for charging and audio to play through the USB cable. After my upgrade to iOS 4.1, the audio no longer works properly. It will play sound for 5 to 10 seconds and then it will stop for about 1-3 seconds and then start playing again. It continues this cycle non stop.
It worked perfectly before my upgrade to 4.1....Well actually 4.0.1 didn't work. 4.0.2 worked perfectly...and now 4.1 doesn't work.
Any advise as to how to fix it?
If it matters...this is my radio.
http://www.pioneerelectronics.com/PUSA/Products/CarAudioVideo/In-Dash/DVD-Receiv ers/AVH-P3100DVD

Another with the same problem, AVH 3100-DVD Pioneer headunit, just updated to 4.1 and am getting frequent random audio dropout when playing audio.
Have confirmed it is only with USB audio playback, happens on car stereo stated and with Magnasonic alarm clock w/ dock adapter.
Checked w/ Pioneer the firmware I have on my headunit is up to date based on SN#. And have done a full DFU restore, fresh ripped tracks from CD in AAC and still occuring.

After upgrading, I am getting the dreaded "iTunes has stopped working" message. I've followed all of the troubleshooting tips on the forum without success. Fortunately, it works on my other computers. Running Win7 pro.

After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??

My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi

My macbook pro 13 early dont see ssd transcend 256 gb after upgrade.if i put him in usb,ssd is working.i do something wrong?

my macbook pro 13 early dont see ssd transcend 256 gb after upgrade.if i put him in usb,he work!i do something wrong?!help me,please!

You showed a kernel panic file from OS X, apprantly Log Me In is installed into OS X or running when you log in.
You should be using the developers installer/unistaller to remove Log Me In from OS X.
Somehow it's in OS X, I don't know, but it's there and you need to remove it. I'm not dealing with Windows, just OS X.
Talk to Log Me In people and find out what is installed where so you can do a manual deletion out of OS X.
If that doesn't work, you have to reboot holding the Shift key down manually search for any Log Me In or Himachi files on your computer, in your System/Library/Extensions folder too, use the free Easy Find.
https://s3.amazonaws.com/DTWebsiteSupport/download/freeware/easyfind/4.9/EasyFin d.app.zip

After upgrading my Aperture software, the adjustment tools don't work on most my projects. only a few. what happened?

Help... After upgrading, only SOME of my libraries allow the adjustments tools to work. What do I do to regain access that allows me to edit my photos?

I recall that from Aperture 2 to 3 the RAW decoder was updated and some of the adjustments required you to manually reprocess the RAW file using the new decoder. I don't remember the exact button but it appears on top with the RAW decode brick and says something like reprocess RAW. Once you do this, the new adjustments will work.
This only would matter if you are using RAW files.

After upgrading to FF4 my link history in bookmarks doesnt work anymore how do i fix it?

all the history of the links in bookmarks i had already clicked on has been deleted after upgrading to FF4 and i can no longer tell which links i hve previously used. this worked perfectly in FF3.6 but no longer woks. how do i switch it back on or fix it?

i have this problem too! the wake/sleep button is apperantly jammed, Apple dont seem to be doing anything about it sadly.

After upgrade to 10.9 my hp110 scanner doesn't work

After I upgraded to 10.9 my scanner stopped working. I can control the scanner, and it scans okay, but when the file is saved to my Macbook Pro it's just fuzzy lines. Printing is fine....the problem seems to be in how the computer receives the image file for storage.

Are you using Image Capture app? If not trying it from there.

After upgrade to Mavericks shutdown with start button doesn't work

Hallo!
I have a MacBookPro 15"/ 2,66 GHz/ Intel i7 (before upgrade to Mavericks OS 10.9.x was installed):
It was always possible to press the start button for about 1 second and this opened a popup where you could chosse "shut down", "sleep" or "cancle". After the upgrade to Mavericks this function doesn't work any more. When I press the start button the MBP goes into the sleep mode.
Any idea what happened to this feature?
Thanks

The feature is still there, but the power button function changed with Mavericks to be like this:
one-click = put the machine to sleep
click and hold (3 secs) = display shutdown dialog box
click and hold (10 secs) = hard power off

After upgrade to 5.0.1, BB 8530 sits on "working"

Similar Messages

Maybe you are looking for