After upgrade to CS5 Audio does not import / load with video in avi

I updated from Ppro CS3 to CS5 purchased from the Adobe store.
I opened a project created in CS3 in CS5 and followed the prompt to save it as a new project.
All tracks, edits, etc were intact and any given sequence played re-rendered etc., as expected.
I created a new project, imported one of the same avi files used in step 2.  Again, everything worked properly
I ran update from the PPro help menu to 5.0.3.   I ran this process two different times.  The first time I selected all updates.  The second time I only update PPro itself.  I did a system restore in between, the following results were identical in both situations.
Now, when I open either the converted or new projected file, Ppro reports the media as "offline"…it is not.  If I "Link Media" the file, I get this message:   The selected file does not contain audio media used by clip references in one or more sequences.  These audio clip references will be deleted, and cannot be undone.  Do you want to continue?"
Gspot.exe reports the audio codec as MPEG-1 Layer 2 and the video codec as MJPG
The avi files were rendered on a MAC from .MOV's to AVI's.  Here are the file properties that PPRo reports:
File Path: E:\CONVERTED\3-1
Type: QuickTime Movie
File Size: 21.9 GB
Image Size: 1440 x 1080
Pixel Depth: 24
Frame Rate: 29.97
Total Duration: 00:23:47:20
Average Data Rate: 15.7 MB / second
Pixel Aspect Ratio: 1.3333
Something in the update from 5.0 to 5.0.3 is the problem.
Running on Windows 7, x64, latest updates

FWIW,
here is the output for the corresponding .mov file...which PPro will not load
General
Complete name                    : E:\coregenius\1.mov
Format                           : MPEG-4
Format profile                   : QuickTime
Codec ID                         : qt 
File size                        : 14.0 GiB
Duration                         : 1h 15mn
Overall bit rate                 : 26.6 Mbps
Encoded date                     : UTC 2010-11-18 20:09:00
Tagged date                      : UTC 2010-11-18 20:09:01
Writing library                  : Apple QuickTime
Original source medium           : 001
©TSC                             : 2997
©TSZ                             : 100
Video
ID                               : 1
Format                           : hdv2
Codec ID                         : hdv2
Duration                         : 1h 15mn
Bit rate mode                    : Variable
Bit rate                         : 25.0 Mbps
Width                            : 1 416 pixels
Original width                   : 1 440 pixels
Height                           : 1 062 pixels
Original height                  : 1 080 pixels
Display aspect ratio             : 16:9
Frame rate mode                  : Constant
Frame rate                       : 29.970 fps
Bits/(Pixel*Frame)               : 0.555
Stream size                      : 13.2 GiB (94%)
Language                         : English
Encoded date                     : UTC 2010-11-18 20:09:00
Tagged date                      : UTC 2010-11-18 20:09:01
Audio #1
ID                               : 2
Format                           : PCM
Format settings, Endianness      : Little
Format settings, Sign            : Signed
Codec ID                         : sowt
Duration                         : 1h 15mn
Bit rate mode                    : Constant
Bit rate                         : 768 Kbps
Channel(s)                       : 1 channel
Channel positions                : Front: L
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Stream size                      : 414 MiB (3%)
Language                         : English
Encoded date                     : UTC 2010-11-18 20:09:00
Tagged date                      : UTC 2010-11-18 20:09:01
Audio #2
ID                               : 3
Format                           : PCM
Format settings, Endianness      : Little
Format settings, Sign            : Signed
Codec ID                         : sowt
Duration                         : 1h 15mn
Bit rate mode                    : Constant
Bit rate                         : 768 Kbps
Channel(s)                       : 1 channel
Channel positions                : Front: R
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Stream size                      : 414 MiB (3%)
Language                         : English
Encoded date                     : UTC 2010-11-18 20:09:01
Tagged date                      : UTC 2010-11-18 20:09:01
Menu
ID                               : 4
Language                         : English
Encoded date                     : UTC 2010-11-18 20:09:01
Tagged date                      : UTC 2010-11-18 20:09:01

Similar Messages

  • After upgrade to 10.8 does not import movies

    Hi,
    I use Final Cut Pro V 7, MPEG Streamclip and VLC to import video files. I have very recently upgraded my OSX to 10.8.4 and although it plays my movie clips  (downloaded from my SD card to hard drive) in Quicktime and VLC and it will not play after inport into Final Cut Pro and MPEG Streamclip?!
    This is infuriating!!
    Please could someone send me a discussion link or a fix for this.
    Thanks

    I would usually batch transcode using MPEG Streamclip, which is perfect for that. For some reason Streamclip, fcp and imovie all crash with H264 now, which they didnt do before upgrade.
    All should be recoded as Pro Res agreed but cant even import to transcode at the moment on any platform which makes me think its an OSX issue. All this software worked perfectly before upgrade.

  • After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.)

    After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.) Help.

    thankyou. THANK you.
    thankyouthankyouthankyou!
    sorry about no screenie but the first option worked (at least so far!)
    THANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOU

  • After upgrade to ios6 iPad does not accept password to wifi, I cannot connect to internet. Pls help me...

    After upgrade to ios6 iPad does not accept password to wifi, I cannot connect to internet. Pls help me...

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

    I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

    Hello there, graciecloyd.
    The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
    iOS: Understanding multitasking
    http://support.apple.com/kb/ht4211
    If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
    Check for app updates.
    Force the app to close.
    Restart your device.
    Update your iOS device.
    Learn more about troubleshooting apps.
    On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • After ATV2 5.0 update Netflix audio is not in sync with video

    As the title says, on ATV2 after the 5.0 update, Netflix audio is not in sync with video.
    Anyone else seeing this?

    I spoke tooo soon.
    Netflix audio is not in sync with video today as well. Any movie, it happens to all.

  • After upgrading to Yosemite iPhoto does not open

    After upgrading to Yosemite iPhoto will not work. Does not work even after installing iPhoto Library Upgrader. Any suggestions

    Does not work even after installing iPhoto Library Upgrader. Any suggestions
    You not only have to download the iPhoto Library Upgrader but you also have to run it on the library.  It'll be in the Applications/Utilities folder.  Double click on it to launch and it will automatically locate the last library you worked with and convert it.

  • After Mountain Lion install,  Mail does not import

    I installed Mountain Lion over a clean installation of Lion. All went well. Entered my AppleID and password, which work fine on my iPhone and MacBookAir. Mail 6.0 (iCloud server) does not import my old mail. iCal and Contacts imported fine. Your help is greatly appreciated!

    Under what circumstances does mail "not leave the mails on the server"?
    If you mean that you delete them (or move them out of the inbox) on one device and then find them not in the inbox on the server when you look from another device, that's how IMAP is supposed to work. (Note that the deletion or moving might be the result of rules you have set up in Mail.)
    If you mean something else, please explain your issue in more detail.

  • After upgrading to Mountain Lion does not to wake up from sleep

    I just upgraded my Mac Book Pro mid 2009 from Lion to Mountain Lion. Everything is ok, but when I try to wake up it from a sleep, white dots fill, only last one remains grey and machine stay forever.
    I really appreciate any suggestions.
    Many thanks!
    Sandro

    My suggestion is that you reinstall Mountain Lion:
    Reinstalling Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Mountain Lion: Select Reinstall Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • After upgrade firmware my iPod does not respond to touch. Help me!

    After upgrade firmware with iTunes my iPod does not respond to touch.
    To be more precise - works, but very, very bad. And around the icons on the display is visible GRAY line of width 1 px.
    Please HELP me! This iPod - the gift for my girl.
    p.s. Maybe this problem arose because I reflash iPod with old cable from the iPhone?

    Thanks all, i solved the problem yourself.
    I helped this one topic: http://discussions.apple.com/thread.jspa?messageID=12641053&#12641053

  • After upgrade to Yosemite iTunes does not sync with iPad or iPhone 5

    iTunes on Mac does not sync with my iPad or iPhone after upgrade to Yosemite

    It just started to sync.  Forget the question.

  • After upgrading to Yosemite, Thunderbird does not recognize email addresses: "syntax error" in recipient address. Fix?

    After upgrading to IOS Yosemite, Thunderbird will no longer send emails to the contacts in my history file that drops down when I "write" a new message. I continue to get a return response that there is a syntax error in the address field of the message although I have tried both my stored emails and manually typed email addresses. What has been changed and how do I recover the use of Thunderbird's great program?
    By the way, how do I eliminate out of date email addresses from popping up and populating email responses rather than the most current ones that are in my contacts? I now have to type each one in separately as the default options that come up are many out of date.
    Thanks much for your great work. Mozilla and Firefox are the best.

    Did you find a solution to this issue?  My mail server is doing the same thing.  I've tried six migrations now, and have a couple of tickets open, but they all have issues.  I have worked around all of them except the mail server problem.
    I did some more digging; the problem appears to be that on a migrated server, it leaves all of your mail store in the old location, doesn't move it, and then doesn't appear to upgrade spam-assassin properly.  The net effect is that the mail server gets the SMTP communication, tries to pass the message into spam assassin, and then it goes south.
    I see errors like this littered in the logs:
    Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed:
    Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed: No such file or directory
    Do you see anything similar?

  • After upgrading to Lion, FaceTime does not give me a login screen.  Help!

    After upgrading to Lion, I tried to use FaceTime for the first time.  The login screen never launches.  What can I do to get a login screen?

    update: It seems like the XCode update did interfere with itunes. I reran the XCode install this time with itunes not running. This seems to update all necessary drivers and Library items correctly.
    After this IPad and IPod touch were working fine again.

  • DVI to Viedo adapter stoped working after upgrade to Mountain lion does not show up in displys any more

    I have a dvi to viedo adaptor that no longer shows up in the displays window, and on image shows up on the tv. How do I get the mac book to reconize the adaptor? The Mv book does respond to the adaptor beging pluged in but does not show up in the display window.
    Mike

    Hi there, You just need to update the drivers of your laptop's built-in wireless adapter..
    I assume you have got Athros AR5007 wireless adapter  
    Kashif Khan

  • After upgrading to Mavericks, iPhoto does not work

    I have an iMac early 2011, with dual hard drives. After upgrading to Mavericks, iPhoto and several other apps are no longer "installed". The following apps have a white circle with a line through it in my main Applications folder on my primary hard drive: Calculator, Chess, Font Book, iChat, iPhoto, Mail, Photo Booth, Preview, Safari, System Prefernces. Also, under the Utilities folder, these are inaccessible: Activity Monitor, System Information, Disk Utility.
    I tried following this thread's advice: https://discussions.apple.com/thread/5539268
    I had iPhoto 9.3.2 on my main drive. I downloaded the 9.4.3 upgrade from here: http://support.apple.com/downloads/#consumersoftware
    When I try to install, I get the following message: iPhoto 9.1 or later is required to install this update. Where did my software disappear to?
    Every Apple upgrade so far has been a nightmare. A previous upgrade of iPhoto bricked the computer and had to bring it to professionals to fix. I am dreading the 10.9.2 "critical upgrade" for the OS that keeps poping up. The Mavericks upgrade also wiped out my Adobe Creative Suite install and several other apps.
    Any help would be greatly appreciated.

    You need iPhoto ver 9.5.1 to be Maverick compatable.
    Use the software update, look for the new app in your Applications folder along side your old versions of iPhoto. Drag the new icon down to the Dock.
    Moving from 10.6.8 the old PowerPC apps are no longer supported. I believe Lion you could still run  the Rosetta to keep the old ppc apps alive. No more with Mountain Lion and now Mavericks. Sooner or later you have to keep up with technology and keep apps up to date.
    https://discussions.apple.com/docs/DOC-6161

Maybe you are looking for

  • Data reconciliation from 2 datatargets to  a new data taget

    Hello Gurus, I have a requirement of reconciling data from 2 data targets to a new data target, any suggestions are appreciated. The Scenario is as follows: Cube1 is in key figure model Cube 2 is accounting model Each account in Cube2 corresponds to

  • Downloaded Web Gallery Photos ? (Confused)

    I'm using iPhoto '06. When I subscribe to a friend's Web Gallery ( created with iPhoto '08) the photos are d/l'd into a smart folder in my source list. Two questions: 1. Why are the movies from his digital still camera not d/l'd as well into this fol

  • Trouble connecting my email account using ntlworld

    I have recently purchased an ipad2 and I am having trouble with the settings for my ntlworld email account and cannot seem to get it to send but I can receive emails. Any ideas?

  • Problems updating panel with remove() and add()

    Hi, I have a class which extends JPanel, and everytime I call repaint on it I am trying to add the contents of a Hashtable to the screen. If I do not include the this.removeAll() then it will add those components to the Container...problem is that it

  • Windows OS Provioning Isuue w/ Cisco IAC SE 3.0.1

      Hi All, I have a pretty sharp Partner in Brazil who is having an issue provioning Windows with IAC SE 3.0.1. They can provision Linux and ESX hosts via CSP. Has anyone encoutered this issue before? Is it a known bug? Here is the issue; Drew, We tri