After upgrade to E2, it won't recognize SD card anymore?

Hi,  I just followed the palm directions to upgrade from a Tungsten E to E2.  Before the hotsync the palm recognized my SD card, but it doesn't recognize it anymore afterwards.  Am I missing something in the hotsync process?
Thank you! 
Post relates to: Tungsten E2

I have a 512mb panasonic SD card from way back that worked on my old Tungesten E, so I am sure that's not the problem.  I went through the recommended upgrade steps faithfully with the new Palm Desktop moving a bunch of my old applications into a folder that aren't E2 compatible, then it went ahead and supposedly restored everything.  However, it failed to recognize my SD card afterwards no matter what.  I found a thread on here that said it may be incompatiblity issues with old software, so I ended up manually restoring my contacts/memos etc and then reinstalling some of the old software.
I must say that I am very disappointed with the whole upgrade process.  I should've bought an used Tungsten E in retrospect so I woulnd't have to deal with all the hassle.
As an aside, now that my E2 is semi functional I found that my screen calibration is off, such that I had a hard time tapping on the bottom of the writing area to get the keyboard.  I played around for hours to see if I can trick the touch screen application into adjusting, but the best I could do is get the keyboard to work but near the upper portion of the screen it's still off.  I do have a screen protector but it's very well plastered to the screen.  Do I have a defective unit?
Thanks. 
Post relates to: Tungsten E2

Similar Messages

  • Phone won't recognize SIM card anymore

    About two months ago I bought the Blackberry Curve 3G from Amazon. I bought it unlocked so that when I go back home (I'm from Holland and I'm currently in the US for a year) I can take it with me and use my old sim card. The phone worked fine up until last week; the battery died and when I turned it on as it was charging, I got a message saying the sim card was not available. I turned the phone off again, unplugged it and opened it to see if the sim card was properly inserted. It looked fine so I turned the phone back on: same thing. I've been very careful with my phone, never dropped it, never got wet etc so that can't be it.
    It's not the sim card because I tried to put in a different card and that didn't work either. When I tried those two cards in a different phone, they did work.
    I contacted Amazon and the company that I bought it from; they told me to contact Blackberry. What can I do?? 

    That can happen when you drop our phone or just some pieces inside the phone near the SIM card are loose. You can contact BlackBerry Customer Support Contact (toll free): 1-877-255-2377 Option #2 and they can help you with this situation but if it is unsuccessful you have to contact Amazon so they can replace your phone immediately..
    Hope it helps!

  • IPhoto won't recognize SD card placed directly into my iMac's SD slot.

    iPhoto won't recognize SD card placed directly into my iMac's SD slot. Image Capture shows the name of the SD card but does not show any photos. If I use the Finder I can see all of the photos on the sd card so I know they are there. I've previously imported lots of photos from teh SD slot directly into iPhoto. Tried a second SD card with the same issue.
    Any ideas? Thanks for the help
    Using iPhoto 8.1.2
    Mac OS 10.6.8

    Make a temporary, backup copy of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    any tips on how to recover those lost photos?
    If you don't recover the photos with the above you'll need to run a recovery app like MediaRECOVER to recover the photos from the memory card.
    OT

  • Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard  fast it lag until I cannot locked or switch off the phone

    Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard  fast it lag until I cannot locked or switch off the phone

    Same issue here both with my iphone 5S as well as my iPad2. THe sync to my macbook air does not complete and it shows a large overcapacity level when connected, but once I disconnect there is plenty of room (4 GB) available, not a 20 GB overage. 

  • After upgrading to Aperture 3.4 it doesn't open anymore.

    After upgrading to Aperture 3.4 it doesn't open anymore. Every listed suggestion in forums did not help.
    After repairing till 99% Aperture closed. It happened with all my libraries, small and great. All of them can be opened in iPhoto.
    After placing aperture.app to the trash can and putting it back to programs again, after a restart, I even couldn't find in preferences com.apple.aperture.plist file anymore. Apple please help!

    After placing aperture.app to the trash can and putting it back to programs again,
    How did you put it back to programs? The idea is to make a complete reinstall
    The problem is:
    There is a problem with the Aperture installer. In some cases the installation is not complete, if you update on top of a recent version.
    For most posters here (there must be 20 and more discussions by now) it helped to reinstall Aperture after removing the Application from the Applications Folder and the reinstalling again.
    If you installed Apperture initially from the boxed retail version, reinstall from the CD/DVD.
    If you installed from the AppStore, download again from the AppStore.
    If you unlocked the Trial or bought online previous to the AppStore, use the saved installer or download the Trial again.
    http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
    Upgrade immediately after installing the previous version; you cannot open your current library with the previous version.
    Regards
    Léonie
    Just for the record:
    To remove the preferences:
    The Preferences are in your User Library, Preferences folder:
    The User Library is hidden by default. You can reveal it from the Finder's "GO" menu:
    Finder > Go,   then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences" sub folder and remove the file
    your Home Folder/Library/Preferences/com.apple.Aperture.plist.
    But I'd try to reinstall first - removing the preferences will only be a temporary fix, and the crashing may occur again, if you do not fix the broken Aperture installation.

  • Stuck at login screen after Yosemite Upgrade - 2013 27" imac won't recognize keyboard or mouse

    I installed yosemite without issues on my 2013 macbook pro retina so decided to try it on my 2013 27" imac. Install went fine until I get to login screen. Wireless keyboard and mouse won't pair so I can't type in password. Connected generic wired keyboard and mouse and still won't recognize it.
    However, when I restart it I can hold down option on keyboard and it will bring up list of hard drives to boot from (I also have windows installed with bootcamp) so I know imac pairs the key

    So the iMac was purchased by my father in 2011 shortly before he died.  I thought, why not check if he also purchased Applecare at the same time? Turns out he did! So after calling and trying to reset the SMC, etc. with it not working the Apple tech told me to turn it over to an authorized repair shop here in Louisiana.  Hopefully they can fix it.

  • TS1277 after installing itunes, my computer won't recognize my cdrom/burner any longer.  Worked  ok before and I have uninstalled itunes and it works again and when I reinstall itunes it won't work again.  I have also went into registry files and deleted

    After installing itunes, my desktop computer doesn't recognize my internal cd rom/burner.  I removed itunes and it works ok and when I reinstall itunes it won't work again.  I went into the windows registry files and deleted the lower filter which is one correction for this and it worked ok until the next itunes upgrade and now it won't work again.  If anyone knows what to do please let me know.  My device manager shows a code "10"

    My device manager shows a code "10"
    That suggests an AFS.sys issue. But we'd better doublecheck.
    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". (If you're running iTunes 11.0.x you'll need to bring up your menu bar first to see the Help menu.) Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

  • Upgraded to iTunes 10 - won't recognize phone

    Hi,
    Hate to make another "won't recognize phone" thread, but all I've found and tried didn't work.
    1. I have a iphone 3G
    2. I haven't updated to the new operating system on the phone (didn't need any new features and wanted to avoid sluggishness). Phone works great as is.
    3. I was running older version of iTunes, just upgraded to 10 yesterday.
    I started the older version of iTunes and was getting a "moblilehelperapp has crashed..." or something to that effect with phone plugged in. When unplugged it was fine.
    I figured "I'll upgrade iTunes which should solve the issue". After upgrade no error, but doesn't see the phone. I've tried rebooting both, different ports. It does charge the phone, but doesn't show in iTunes.
    All help is greatly appreciated.
    Thanks.

    I would take a look here regarding iTunes 10 & 3G iPhones: http://discussions.apple.com/message.jspa?messageID=11903365#11903365
    Good luck,

  • After upgrading to Yosemite, Thunderbird does not recognize email addresses: "syntax error" in recipient address. Fix?

    After upgrading to IOS Yosemite, Thunderbird will no longer send emails to the contacts in my history file that drops down when I "write" a new message. I continue to get a return response that there is a syntax error in the address field of the message although I have tried both my stored emails and manually typed email addresses. What has been changed and how do I recover the use of Thunderbird's great program?
    By the way, how do I eliminate out of date email addresses from popping up and populating email responses rather than the most current ones that are in my contacts? I now have to type each one in separately as the default options that come up are many out of date.
    Thanks much for your great work. Mozilla and Firefox are the best.

    Did you find a solution to this issue?  My mail server is doing the same thing.  I've tried six migrations now, and have a couple of tickets open, but they all have issues.  I have worked around all of them except the mail server problem.
    I did some more digging; the problem appears to be that on a migrated server, it leaves all of your mail store in the old location, doesn't move it, and then doesn't appear to upgrade spam-assassin properly.  The net effect is that the mail server gets the SMTP communication, tries to pass the message into spam assassin, and then it goes south.
    I see errors like this littered in the logs:
    Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed:
    Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed: No such file or directory
    Do you see anything similar?

  • After upgrading to Yosemite iPhoto won't work or upgrade to newest version because" someone else bought or it was deleted" What's up'? I bought it but I did delete my app from my iPad! Did I screw up?

    After upgrading from Lion to Yosemite my iPhoto wouldn't work because it "needed to be upgraded" so I tried to upgrade by got the message that I couldn't upgrade b/c someone else bought it or it was deleted. I deleted my iPhoto app on my iPad about 1 week ago but my iPhoto and 1000s of pix were fine. What's up? Did I screw up by deleting the app?

    No, the versions of iPhoto on the iPad and on OS X are totally different.
    What Apple ID are you using for the Mac App Store? Who else has access to that Apple ID, or what possible other Apple IDs could be in use? It's possible you'll need to purchase iPhoto to get the upgrade, though I'd think Software Update should offer you the correct version.

  • After upgrade LR 5.5 won't open (OS X Mavericks)

    Greetings,
    After upgrading to LR 5.5 via CC's application manager it will no longer open.  Launching LR produces the splash screen where it just stops loading.  Activity Monitor indicates that it is not responding.  Looking in the system logs I see this:
    6/26/14 11:45:49.664 PM Adobe Photoshop Lightroom 5[1024]: Cannot add package named WFCoreTests
    Looked in /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WichitaFoundation.agtoolkit/Versions/A/Frameworks/WFCoreTests.f ramework, /Applications/Adobe Photoshop Lightroom 5.app/WFCoreTests.framework, /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WFCoreTests.framework, /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WichitaFoundation.agtoolkit/Versions/A/Frameworks/WFCoreTests.a gtoolkit, /Applications/Adobe Photoshop Lightroom 5.app/WFCoreTests.agtoolkit, /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WFCoreTests.agtoolkit
    !! Did you remember to add a copy frameworks step to your project?
    6/26/14 11:45:49.665 PM Adobe Photoshop Lightroom 5[1024]: Cannot add package named WFSQLiteTests
    Looked in /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WichitaFoundation.agtoolkit/Versions/A/Frameworks/WFSQLiteTests .framework, /Applications/Adobe Photoshop Lightroom 5.app/WFSQLiteTests.framework, /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WFSQLiteTests.framework, /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WichitaFoundation.agtoolkit/Versions/A/Frameworks/WFSQLiteTests .agtoolkit, /Applications/Adobe Photoshop Lightroom 5.app/WFSQLiteTests.agtoolkit, /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WFSQLiteTests.agtoolkit
    !! Did you remember to add a copy frameworks step to your project?
    6/26/14 11:45:49.666 PM Adobe Photoshop Lightroom 5[1024]: Cannot add package named WFWebTests
    Looked in /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WichitaFoundation.agtoolkit/Versions/A/Frameworks/WFWebTests.fr amework, /Applications/Adobe Photoshop Lightroom 5.app/WFWebTests.framework, /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WFWebTests.framework, /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WichitaFoundation.agtoolkit/Versions/A/Frameworks/WFWebTests.ag toolkit, /Applications/Adobe Photoshop Lightroom 5.app/WFWebTests.agtoolkit, /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WFWebTests.agtoolkit
    !! Did you remember to add a copy frameworks step to your project?
    6/26/14 11:45:49.677 PM Adobe Photoshop Lightroom 5[1024]: Cannot add package named WFOzClientTests
    Looked in /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WichitaFoundation.agtoolkit/Versions/A/Frameworks/WFOzClientTes ts.framework, /Applications/Adobe Photoshop Lightroom 5.app/WFOzClientTests.framework, /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WFOzClientTests.framework, /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WichitaFoundation.agtoolkit/Versions/A/Frameworks/WFOzClientTes ts.agtoolkit, /Applications/Adobe Photoshop Lightroom 5.app/WFOzClientTests.agtoolkit, /Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/WFOzClientTests.agtoolkit
    !! Did you remember to add a copy frameworks step to your project?
    Photoshop 2014 opens just fine.
    Any suggestions?  I kinda really need it to work.  Like RIGHT NOW.
    OS X 10.9.3.  Adobe Photoshop Lightroom 5.5 [968504].  The Apps tab in the CC Application Manager says LR is "Up to date."

    Update:
    Following this procedure worked for me: steps listed in post #92:
    Re: Lightroom . Wont Launch.

  • After upgrading to ios8 iCloud won't recognise password on iPhone and iPad only on my Mac Mini and Macbook Air

    After upgrading to ios8 my iPad and iPhone could not sign in to iCloud. The error was either 'server error' or verification failed. I reset the password and verified I could log in via my Mac Mini and Macbook Air but I still get the error on my two iPads and iPhone that verification failed.

    somehow, after delinking my apple(icloud) id with iphone, i erased my iphone to start with new, in hope that it should work now, but nothing seems to be working,
    now my iphone is blank, i erased all data and after trying several times, its showing while setting up iphone.
    Could Not Sign In
    There was an error connecting to icloud.
    also after upgrading to ios8. i m unable to login even at website icloud.com
    there is something like this
    Connection error
    icloud encountered an error while trying to connect to the server.

  • X205-sli1 64bit windows 7 won't recognize sony camera anymore and SLI mode flicker

    I suspect this is more a windows 7 driver issue than a laptop issue, but does anyone have any ideas?
    background:
    so, started with X205-sli1 default a month ago, since then it has gotten... 4gb ram, dual 500gb drives, and a T9500 CPU  (was running at 85c when idle before so as long as I was redoing the heatsink compond I upgraded the CPU, now runs at 40c when idle and faster).... anybody need a T7250 that works? pm me.
    afterwards formated and put windows 7 64bit on it...   since then loaded all the drivers from toshiba website and everthing seems to work fine except it won't recognize the sony DSCW90 camera as a mass storage device like it did before.  The camera still works fine on another system running ubuntu, so I know the camera/cable are good.
    second problem, even with the latest nvidia driver I get a nasty flicker when I enable the SLI mode, seems to be driver related....
    Thanks,
    Robert
    p.s. the instructions lorddethstalker's signature are spot on for how to do the upgrade... thanks.

    I long ago learned when I do an OS install I do a clean one with a complete wipe of the drive... read the instructions and seems about right...
    I seem to recall something from way back with a similar problem when I first got the camera... I just don't remember the solution...
    Clean installs were the way to go in my thinking as well. However, because of some glitches like this, I would mention a couple of things.
    Probably the best way to go, would have been to first have done a full system Toshiba Recovery of your Vista 32 OS, drivers, etc, to your system's factory default out-of-the-box setup. Nice and clean no messy software/hardware updates/installs to mess it up. Then, after that to have done an in place upgrade to Windows 7 32bit. I think you would have had the least amount of trouble from everything I've learned on this forum, and from my own personal experience.
    Next, while I fully understand the hyped benefits of the Windows 7 64bit version, the reality can be somewhat different. First, though it has a 64bit capability, your system was originally designed as a 32bit system, supplied with the appropriate 32 bit OS, and as such, it can only take a maximum of 4GB or RAM. Despite your percieved benefit of seeing/using the full 4GB of RAM, this is probably, at the very least, un-done by the fact that your old 32bit software actually runs faster on Windows 7 32bit. If your system could handle more than 4GB of RAM, and especially if you were willing to invest in new 64bit software, it would have been worthwhile to install Windows 7 64bit. Otherwise, I sincerely doubt that it was.
    The main chipset and its drivers are what handles the USB ports. If you did (re)install those, from the links I gave you before, there's not much else you can do there. While it is not the same problem you are experiencing, the only other suggestions I have is to follow the instructions in Method 3 of this article:
    USB port may stop working after you remove or insert a USB device
    Did you ever try the system reset I mentioned before?
    Good luck.
    Mike

  • A665-s5184​x won't recognize SD card

    I bought a used Satellite a665-s5184x with a dead hard drive. I replaced the drive and ordered the restore DVDs from Toshiba. It's up and running, but it won't recognize a 2GB SD card plugged into the computer's SD card slot. It WILL recognize the card if I use an external USB card reader.
    I've downloaded and installed the SD card driver from the Toshiba web site and restarted the computer but it made no difference.
    Any suggestions?

    Everything should have been working after using the recovery media. If the SD drive never worked after that, it sounds like it may be hardware failure that happened at the same time.
    - Peter

  • Deskjet 3050 won't recognize wireless network anymore.

    Product:  HP Deskjet 3050
    Operating system:  Windows 7-64 bit
    Printer quit printing wirelessly.  Using the control panel on the printer, I restored defaults.  Now it won't recognize any wireless networks.  I have unplugged computer, but that didn't help.  I don't want to unplug my router, because I will lost all my DVR items (we are on AT&T uverse).  Any tips?

    Run a Wireless Network Test from the Network menu of the front panel.  What does it say?
    If everything is OK (which I suspect), re-install the printer with the temporary use of a USB cable just as you did originally when you installed it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for