After upgrade to Firefox 6, certain sites can no longer be loaded.

After upgrading from Firefox 5 to FF 6, certain sites will no longer load. These sites both use Typepad and that seems to be where FF6 hangs. Have not had this problem with FF5. Tried clearing cache, deleting bookmarks (to sites that won't load), and typing in address. That doesn't help. Sometimes, the sites load partly (i.e. with only words, no images); other times, load after a long time (several minutes); most often will not load at all.

I've only one hint to you, cause I've mot on Mac-Server.
With 10.7 Apple have switched from Samba (maybe due to licence problems with GPL based stuff) to a own protocol called "XSMB"
This had caused problems with some NAS systems too.
Eventually someone have a glue to solve that, as several users have problems with SMB shares since that.
Lupunus

Similar Messages

After upgrading to Firefox 6.0 I can no longer get ANY youtube video to play. I already did the suggestion regarding my firewall.

When I try to go on to the YouTube site I get a message from Firefox that says:
''''''''* * The connection has timed out
* * The server at www.youtube.com is taking too long to respond.
* * The site could be temporarily unavailable or too busy. Try again in a few
* * moments.
* * If you are unable to load any pages, check your computer's network connection.
* * If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.''''''''
I have already gone through the step you suggested to make sure Firefox is a trusted site with my security program, but nothing has changed.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

After upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in or

After yesterday upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the + mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in order to quickly add an address to an e-mail that I wish to send?
Bob

On the right of the To: field you will see a circled plus sign:
Click it.

I cannot find my 'recently bookmarked' tab after upgrading to firefox 3.6.7, can anyone help?

I've recently upgraded to firefox 3.6.7 and I now find that the 'recently bookmarked' tab in the bookmarks menu has disappeared. Does anyone know how to restore it because I find this a very useful feature. It was next to the 'recent tags' button that I never use.

All your data such as bookmarks, passwords etc., is contained in a folder called a "Profile". See: [[Profiles]]
You can recover your data from the old one if it's still intact and move it to the new profile. This article explains how to go about it: [[Managing Profiles]]

After upgrade to 10.7.1 users can no longer connect to shares

Ok , im not an admin to start off, but after upgrading the OSX lion server to 10.7.1 i can no longer connect to the sharepoints on my mac mini server.
Through SMB or AFP .. i tried using the connect to server on one of my clients and when i attempt to log in , it shakes the login window as if my password were not accepted.
Heres where it gets a little confusing to me, i have 2 mac mini servers both running OSX LION SERVER 10.7.1 .... The one that I CAN NOT LOG INTO is my OD Master... the second one is just used for file sharing...
WHEN i attempt to login into the file share server (which is connected to the OD Master which is rejecting my user logins) i can connect JUST FINE and access the sharepoiints on that server...
A couple more weird things... on the OD MASTER (again the server which is rejecting all user logins) I CAN login with my admin credentials and access the sharepoints... ??
-- when i am locally logged into the OD MASTER server, if i add a new sharepoint from scratch and edit the ACL , NONE OF MY USERS SHOW UP nor any of my user groups... it only allows me to add the Administrator access to that share..
Have i done something very wrong somehwere? this server that is having a problem is only used as a OD master and File share nothing else..
I did not change any settings besides add a new mac mini server to the OD and performa the 10.7.1 upgrade.
ANY HELP WOULD BE HUGE as i have spent a 12 hours trying to figure this out before i resort to a re install.

I've only one hint to you, cause I've mot on Mac-Server.
With 10.7 Apple have switched from Samba (maybe due to licence problems with GPL based stuff) to a own protocol called "XSMB"
This had caused problems with some NAS systems too.
Eventually someone have a glue to solve that, as several users have problems with SMB shares since that.
Lupunus

After upgrading to lion 10.7 I can no longer use my canoscan 9950f, why?

After upgrading to lion 10.7 my canoscan 9950f scanner is no longer recognized. Have I lost thye use of this scanner by going to 10.7?

Not likely. Make sure the scanner is still available in System Preferences > Print & Scan. You might have to delete the old scanner and add it again if your computer cannot "find" it.
Before you do that, and while you are in Print & Scan, see if you can get it to scan by selecting the Scan tab.
In Lion, all scanning functions have been relegated to Preview, the Print & Scan preference pane, and Image Capture.

Depois de Atualizar para Mac 10.9 não consigo mais baixar Programas - Erro "hardware Gráfico " (After Upgrading to Mac 10.9 I can no longer download Programs - Error "Hardware Graph" (

Ola amigos
Depois de atualizar para o sistema Mac OX 10.9 não consigo baixar programas e Games que tinha na versão anterior.
Aparece um erro de " hardware Grafico não compativel"
_____ Minha dúvida fica, porque antes eu comprei e baixo, e agora não baixa mais ?
Alguem poderia ajudar ???
my mac is Macbook Pro 5,2
=============\\=============\\ in ingles ==========================\\===============\\====================
Hello friends
After upgrading to Mac OX 10.9 system can not download programs and Games that had in the previous version.
Appears an error of "hardware not compatible Grafico"
_____ My question is, because before I bought and down, and now does not download anymore?
Could someone help??

After upgrading to 8.0.2 I can no longer send mail

After upgrading iPad mini to 8.0.2 I can no longer send mail, only receive. Error msg "the recipient was rejected by the server because it does not allow relaying". Have tried rebooting, also resetting network connections, still no good.

Hi maxwell156,
Welcome to the Apple Support Communities!
I know that using Mail on your iPad is very important and is frustrating when it doesn’t work as you would expect. In this situation, I recommend reading over and using the information provided in the attached article to help the troubleshooting process.
iOS: Troubleshooting Mail
Have a great day,
Joe

After upgrading to 10.5.3 I can no longer login to my RedHat ES4 shares

Hello,
I am a new Mac user so please forgive me if there is a simple answer to this question...
Since I installed the 10.5.3 update over 10.5.2 I can no longer login/connect to my RH ES4 (SMB Version 3.0.10-1.4E) shares. I can still login to my CentOS 5 (SMB Version 3.0.25b-1.el5_1.4) and my older RedHat 7.3 (SMB Version 2.2.3a) shares, as well as a few windows shares, without any problem. It is just the RH ES4 shares that I can no longer connect to.
For legacy purposes I configured SMB on both my MacBook Pro and the above mentioned servers to use plain text passwords. To do this on my MacBook this I created nsmb.conf in /etc which contains the following...
[default]
minauth=none
Everything worked perfectly minutes before the upgrade to 10.5.3 and nothing else in the network, software or hardware, has changed.
Any help would be greatly appreciated.
Thanks,
Tom Boilard

Welcome to the forums... unfortunately SMB issues are not fully mainstream.
Anyhow, I have scanned the change log of files touched by the update (searching for SMB - original list courtesy of Rixstep). This yielded:
/Library/Preferences/SystemConfiguration/com.apple.smb.server.plist
/private/etc/smb.conf
/System/Library/CoreServices/SmbFileServer.bundle/Versions/A/Resources/DesktopDe faults.plist
/System/Library/LaunchDaemons/com.apple.smb.server.preferences.plist
/System/Library/LaunchDaemons/com.apple.smbfsloadkext.plist
/System/Library/LaunchDaemons/smbd.plist
/private/etc/smb.conf.template
/System/Library/Extensions/smbfs.kext
/System/Library/Extensions/smbfs.kext/Contents/CodeDirectory
/System/Library/Extensions/smbfs.kext/Contents/CodeRequirements
/System/Library/Extensions/smbfs.kext/Contents/CodeResources
/System/Library/Extensions/smbfs.kext/Contents/CodeSignature
/System/Library/Extensions/smbfs.kext/Contents/Info.plist
/System/Library/Extensions/smbfs.kext/Contents/MacOS/smbfs
/System/Library/Extensions/smbfs.kext/Contents/Resources/load_smbfs
/System/Library/Extensions/smbfs.kext/Contents/version.plist
/System/Library/Filesystems/smbfs.fs
/System/Library/Filesystems/smbfs.fs/Contents
/System/Library/Filesystems/smbfs.fs/Contents/Info.plist
/System/Library/Filesystems/smbfs.fs/Contents/Resources
/System/Library/Filesystems/smbfs.fs/Contents/Resources/English.lproj
/System/Library/Filesystems/smbfs.fs/Contents/Resources/English.lproj/InfoPlist. strings
/usr/lib/sasl2/smb_lm.so
/usr/lib/sasl2/smb_nt.so
/usr/lib/sasl2/smb_ntlmv2.so
/private/var/db/smb.conf
Items highlighted in bold could be relevant.
Have you checked that your entry in nsmb.conf is intact? If it is, could it be overridden by a change to one of the other conf files (or a plist)?

HT4205 After upgrading my touch (5 gen) I can no longer find Known networks automatically. It says unable to join network

After upgrading my Touch (5gen) to ios 7.0 it will no longer connect automatically to known networks.
sometimes it will and then disappear Any help

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

After upgrading to 27.0.1, I can no longer access one secure site. I now get Error code: ssl_error_bad_mac_alert. This worked before the update.

I am trying to access the GUI administration page of my wireless controller. It is using a cert issued by the vendor that makes it, so the names do not match. I have created a permanent exception for the certificate. Whenever I try to access the site, I now get the following error every time:
Secure Connection Failed
An error occurred during a connection to 172.24.6.10:4343. SSL peer reports incorrect Message Authentication Code. (Error code: ssl_error_bad_mac_alert)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
This page worked fine before the most recent update.
Is there a setting or something I can change to allow this page to load?

Thank you both for your suggestions. I had seen the possible solutions of time and ipv6, but those did not help. I cannot recycle the wireless controller, as that would disrupt my business's network too much.
Cor-el, your answer was what worked for me. I went through each security.ssl3. setting like you suggested and found that
security.ssl3.dhe_rsa_des_ede3_sha is where the error was coming from.
With that one set to false, I was able to connect to the admin page again. When I set it back to true, the error comes back.
I also found that specifically any one of the following were needed for teh connection to work as long as the one above was false.
security.ssl3.rsa_aes_128_sha
security.ssl3.rsa_aes_256_sha
security.ssl3.rsa_des_ede3_sha
so I am leaving the one that caused the error disabled and it is working again.
Thanks!

After upgrading to Firefox 4.0.1, it no longer will open external links - anything from emails, IMs, databases won't open - how can I fix this?

No links from external programs will open - this is usually kind of ok since I can cut and paste, but some links from databases don't provide copy-able links, meaning I cannot access information via Firefox.

Hi BladedxRayne,
You should look at the article [http://kb.mozillazine.org/Preferences_not_saved Preferences not saved].
Hopefully this helps!

Certain "sites" taking too long to load - spinning wheel

To clarify, I'm not talking about "sites" that are live on the web, but rather the "sites" that you can select in the files dropdown menu. Almost all of them load instantly, but one in particular takes the better part of 20 minutes or more to load when I select it. I get the spinning beach of of death for a loooong time. Once it does load, everything works fine.
I've uninstalled Dreamweaver CC, and reinstalled, but the issue still exists.
I'm using OS X Yosemite, V 10.10.1 on a MacBook Pro.
Thank you!!

Thank you, Jon and Nancy! Creating a new site definition didn't exactly do the trick, but it led me down the right path... After creating the new instance, I noticed that it took ages to rebuild the site cache. Disabling that in the site's advanced settings took care of the problem. I didn't think the site was particularly huge, but couple of the WordPress plugins seem to contain a large number of files.
In conclusion, the spinning wheel seemed to be caused by Dreamweaver attempting to rebuild the site cache, even though it never showed a progress bar or message indicating that.
Thank you!

Can't get past home page of instructables after upgrading to firefox 13

I can load the home page, but if i click on anything past it, it acts like it continually loads, nothing comes up on the page, it sticks at "Transferring data from www.instructables.com..." or "Read www.instructables.com" it seems to only have happened after upgrading to firefox 13. I have an old version of firefox aurora that came with the tor browser suite and tried instructables on there. worked perfect, and i was going to instructables on a regular basis before the update, so it's gotta be from the update right? what can i do to fix it?
P.S. It's not just the specific URL under "URL of affected site" because none of the pages will load after the home page.

did that solve the issue? i still believe it has more likely to do something with faulty cache (maybe the restart of the browser really triggered it );
if it was an issue with dns prefetching it would be rather strage since you already were on the domain instructables.com & wouldn't have had to resolve the domain for the subsites again. and since the server, your isp or your local hardware might not support ipv6 fully yet, it can always cause some glitches too...

After upgrading to firefox 7, I can't use many of the features on my schools secure website. So, how do I install a previous version of firefox?

After upgrading to firefox 8, I can't use many of the functions on my schools website like opening the textbook and sending emails. I spoke the school's tech. support & they informed me that my version of firefox was not compatible with their system. So, how do I install a previous version of firefox (firefox 6 to be exact)?

You can download Firefox 6.0.2 for Mac OS X 10.5 from ftp://ftp.mozilla.org/pub/firefox/releases/6.0.2/
Backup your '''Profiles''' folder before new installation.
edit: replaced random third-party download site link.

After upgrade to Firefox 6, certain sites can no longer be loaded.

Similar Messages

Maybe you are looking for