After upgrade to ios 6 usb connection problems with car stereo

Hi Everyone,
after ios upgrade to ios6 i am not further able to use the iPhone 4s as music device - having usb connection problems ("not readable"). I am sure, that the upgrade ist the culprit; worked fine before. My car stereo is built in a Volvo XC 60; the device is connected via the standard usb cable by apple.
Any Ideas?
Thanks
Ivo

(same problem thread): see also https://discussions.apple.com/message/20185146#20185146 (not fixed)

Similar Messages

IPhone 4S after upgrading to IO6 has a problem with bluetooth in Peugeot 308 No battery status is shown. With 5.1.1 everything was ok.

iPhone 4S after upgrading to IO6 has a problem with bluetooth in Peugeot 308 No battery status is shown. With 5.1.1 everything was ok.

https://discussions.apple.com/message/25195858#25195858

Blutooth Problem with car stereo and iPhone5

Got new iPhone 5 yesterday and paired it with car stereo for handsfree use. When I make a call I can use radio answer button and the speakers. When I receive a call I can only use handset. iPhone 4 worked fine so I doubt it is the car. I deleted and repaired the phone yet still the same issue. Help?

Hey nippers1!
It does sound like we have a conflict with your device and your car Bluetooth. Thanks for doing that great troubleshooting! I would like to ask, have you checked with your car manufacture to see if the phone was compatible with your car's Bluetooth? Sometimes different devices that have different Bluetooth profiles will work differently. Can other iPhone 5s connect at all? Can your iPhone 5 connect and use other Bluetooths fully? Also, are you having any problems with making and receiving calls in general? Also, is your device up to date? Please make sure it is on the most current software. Please report back!
MichelleG_VZW
Please follow us on Twitter @vzwsupport

After upgrade to IOS 8.3 sync with iTunes doesn't work

After upgrade iPhone 6, iPad Air to IOS 8.3, the sync (over wifi, as well) to iTunes doesn't work anymore.
On iMAC iTunes, the last sync's hour and day appear different from what is recorded on mobile devices (iPhone and iPad); with IOS 8.2 and the previous iTunes' version the sync worked correctly: the dates are the same only for few seconds after syncronization, then the IOS devices show the syncronization's dates related to two weeks ago.
Thanks

you'll need to contact your carrier.

After upgrade to ios5, there're problems with my Photos!

After upgrade to ios5, i found my Photos have some problems.
The photos cannot be shown clearly but when i use 'edit' it become alright but after i finish the 'edit', it goes wrong again.
Also, the photos are in the wrong order! the very first photo of my phone appears in the latest photos of my phone! but again when i use'edit', it shows the original photos and after the 'edit' it is the wrong photo.... What can i do?

Have the same issue. I ugraded my iphone 4 to ios5, wifi shows no wifi and bluetooth keep searching. Even my iphone automatically shut down after 1 day.
I have reset all the setting, configure my iphone as new iphone, but still the problem remains same.
Can any one provide help on this?

Usb connectivity problems with 2330

i was sold a ca-50 usb data cable to connect my phone to pc. ive downloaded pc suite 7.1 and its just not working. Any ideas? Have I got wrong cable? Or do i need to change the settings on my phone?

You have the Nokia 2330 classic? I don't think that model has a usb connection other than a special connection to use for Nokia care points.

Ios 5.0.1 + Iphone 4 bluetooth connection issue with car stereo

My Iphone 4 will not connect with my new JVC car stereo I have spoken to JVC customer support and they say its an Apple issue that they need to fix (changed something with the bluetooth connection scripts in the latest update update, as they have done before).
The phone finds the stereo and then tries to pair with it, however half way through the pairing process the phone losses connection with the stereo and the pairing is then deleted.
I have deleted all the existing pairing in the phone memory and ensured that the stereo has been rebooted to ensure no conflict of previous installs would effect the process
Does anyone know if Apple are going to fix this glitch in a new softwre update (and if so when is it being released) as at the minute i have an expensive stereo which is cant use to its full ability?

Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all. You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

Nokia 206 connecting problems with car bleutooth

My problem with the 206 is the bleutooth connection between my phone and car.
After a few seconds (10 to 30 seconds) of connection, the phone disconnect hisself, the screen of the phone goes white and the connection goes down. Then after another 10-30 seconds, the screen goes back to normal and the connection is made again.
When i make a call and this happens, the call ends immediately and i have to wait 10-30 seconds to be able to call agian.
And this goes on and on and on. So i can't call with the phone when i am in my car.
Can anybody help me with this problem?
Thx in advance
Solved!
Go to Solution.

update: i did go back to the shop and i got a new one who really works.

Iphone bluetooth problem with car stereo

I bought a third party bluetooth adapter for my car stereo. Hooking it up with any other device ( other mp3 players, my husband's windows phone ) all work and stream music. Pairing it with my iphone 5 causes constant crackling and static like blown speakers. Same with the ipod touch. Is there a setting in the phone that will fix this?
Thanks

I had same issue on iPhone 4 using "ebay" type adapter but improved it
with Blackberry bluetooth receiver
I however now have iPhone 5 wired in for perfect results

Desktop manager 6 USB connection problems with BB bold 9780

Hello,
I am running Windows 7 Home premium 64 bit on a DELL XPS 8100 PC.
The latest version of the desktopmanager 6 is 6.2010 (Bundle 21).
The desktop manager is not able to connect to my BB 9780 bold via USB.
It short of partially connects to the device. It is able to display its model, PIN and device software version. However when I go to the organize tab and I press the "Configure settings button" an error message is displayed telling me that the device is not connected.
In the control panel there is a device "BlackBerry 9780".
I have tried various things so far without success
1) Uninstalled/ installed desktopmanager software
2) Tried different USB ports
3) Tried to connect via HUB
4) Reset my 9780 device by removing the battery
When I connect my 9780, the device pops up a menu with 3 choices:
1) mount as USB device"
2) synchronize media"
3) charge only"
I tried 1 and 2, no luck.
I just had the BB 9780 for one day. Without a working synchronize option
I can not use it.
Is there anyone who can give some advice ?

I finally solved the problem. The USB mass storage device failed to install because of a conflict.
The conflict was caused by the software package NTI Shadow&Ninja. After removing NTI Shadow &Ninja and reinstalling the BB desktop software, all the USB drivers installed correctly.
The bold is now recognized by the BB desktop manager. It also shows up as a drive in the explorer.

USB connection problem with Windows XP

When I connect my device with my Windows XP computer, the computer can't see the device. I have a Treo 700wx. I used to be able to connect with no problem -- but now nothing. I am running ActiveSync 4.5. I tried soft reset on the Treo with no luck. Not sure what to try next??
Help!
Post relates to: Treo 700wx (Alltel)

mimiandbop wrote:
I am a newbie, (to the site, not to Palm) looking for some guidance with old technology. I am still using the Palm IIIXE with a Dell computer running XP Home. My question is this: What do I use to connect my cradle, which was serial port, to the computer's USB port?
I have been using an infrared adapter for USB but recently had to do a wipe and reload of the XP and was hoping there might be something better then that method.
Any help will be appreciated.
Post relates to: Palm IIIxe
This question is Off-topic for this section of the forum. Questions here concern MicroSoft ActiveSync.
Please start a new thread in the Hardware section to get an answer.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Bluetooth connection issue with car stereo

Hi,
I have a N8-00, with the current belle software on it.
With my car Bluetooth it will connect and function properly when I first add the device (N8) to the car Bluetooth, but if I turn the ignition off and then back on again it won't pair, if I try to manually do it, it just comes up with error without a code.
Deleting the device and trying to re-pair it wont work unless I restart my phone, and I am unable to turn Bluetooth off on my phone until after restarting it.
This is getting very frustrating.
Please help!!

Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all. You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

Help! Nano problem with car stereo transmitters

We've bought 2 different FM transmitters from Best Buy - were told either would work with the Nano. Both did work with the Mini, but we get total silence when we connect the Nano. Took one back - still have the Griffin model. Anyone else having this problem?

There's a problem some here have reported (and I've experienced once) in which the nano won't output sound through the dock connector without a reset.
From the support site:
"Reset your iPod by toggling the Hold switch on and off (set it to Hold, and then turn it off again). Then press and hold the Center and Menu buttons for at least 6 seconds, until the Apple logo appears."
Give that a try and if it doesn't work, it may need to be replaced. Note that only the FM transmitters that work with the dock connector will probably work with the Nano. I know the Monster ICarPlay does work, as I use it with my nano frequently.
-- Mark

FIle check problem with car stereo

Have a IPod photo, using an iPod compatible JVC stereo in the car, with Ipod adapter.
Was working fine for a couple of weeks, but now just keeps saying file check. Used to file check for a few seconds and then the Ipod could be accessed through the deck. Now file check just keeps flashing.
The Ipod itself says "ready to disconnect", with the menu flashing up every few seconds for a split second, as if it is about to connect (but then it doesn't do so).
Help!?!

I had same issue on iPhone 4 using "ebay" type adapter but improved it
with Blackberry bluetooth receiver
I however now have iPhone 5 wired in for perfect results

After Upgrade to IOS 6.1, find my iPhone's map cannot see the street or city, especially in China, can we change back to google map in this app?

After Upgrade to IOS 6.1 also with "find my iPhone" app, the map when locate my iphone cannot see the street or city, especially in China, can we change back to google map in this app?
If the map cannot show details, how can we find my iphone? And it seem Apple just have an good idea for customer only but it is not function, why need to use Apple map in "Find my Iphone" if we all know it is not a good map!
So stupid Apple!!!!!

https://itunes.apple.com/us/app/google-maps/id585027354?mt=8
It won't help find your iPhone, however.

After upgrade to ios 6 usb connection problems with car stereo

Similar Messages

Maybe you are looking for