AFTER UPGRADE TO IOS6.1, IP5 CANNOT CONNECT 3G. ***! HELP!
For the life of me, the iPhone 5 just does not have 3G or Edge after the ios upgrade to ios6.1. *** Apple! DO NOT RELEASE AN UPDATE TO SCREW UR USERS! ***!
WHAT IS UR SOLUTION???
Of all my devices, the problem is only associated with an early MBP (2006) 15". I don't have the problem with recent devices, nor with the desktops. Over the past coupla days I tried all proposed solutions, but so far nothing really persisted.
One observation I have has to do with the number of bars indicated by the AirPort display in the menu bar: its always full at 4 bars :-/ Previously, I had areas in my house where the the reception was at 1-2 bars, but not now: its a full 4-bars! This kinda brings to mind the bar-problem that was fixed by Apple after the introduction of iPhone 4.
Similar Messages
-
I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?
Try to perform SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Then try a safe boot:
http://support.apple.com/kb/HT1564
Ciao. -
After upgrading to ios5.0.1 cannot connect to wifi
After upgrading to ios5.0.1 iPhone can find wifi but cannot connect for more than a few seconds. Have tried turning off "enable 3G"and wifi will connect for few seconds then will lose it. After turning "enable 3G" back on it will briefly connect to wifi then drop. Have tested wifi with older iPhone which has no problems connecting. Have tried reset and reset network settings. Have also restored iPhone.
You need to contact Citi -> they may have not updated their extension yet
-
I have upgraded to safari 5.1 through auto update
After restart the safari does not connect to any server saying it cannot find them
other browsers such as Minefield work fine and the internet connection works fine
The computer is connected via airport to a router, firewall is active.
Safary 5.06 worked without any glitch
any ideas?I have the same problem but im on Lion, All my web browsers seem to work perfect but not Safari. : (
-
After upgrade to 10.6.5 cannot connect to a port
Let me apologise upfront - I don't speak the Apple language but need some help. I have upgraded to 10.6.5 (tried update and then also combo). I need to access my work e-mail remotely. This was not a problem before upgrade. It accesses via a port on the work server. I get to the stage of having to enter my password, which the system now says it does not recognise. I have ruled out internet provider. I connect via a speedstick modem with sim card. I can access the work mail no problem on my PC laptop as usual. It worked perfectly prior to upgrade. Anything I can try? Thank you.
Of all my devices, the problem is only associated with an early MBP (2006) 15". I don't have the problem with recent devices, nor with the desktops. Over the past coupla days I tried all proposed solutions, but so far nothing really persisted.
One observation I have has to do with the number of bars indicated by the AirPort display in the menu bar: its always full at 4 bars :-/ Previously, I had areas in my house where the the reception was at 1-2 bars, but not now: its a full 4-bars! This kinda brings to mind the bar-problem that was fixed by Apple after the introduction of iPhone 4. -
I have been having intermittent/no wireless success on the 5GHz band of my Airport Extreme. I'm on an iMac early 2008. It was working fine before upgrading to Mountain Lion. I have tried many things (deleting the wireless network, readding it, changing settings on the AirPort Extreme, deleting the 5GHz network on that and readding it, running diagnostics) but nothing has fixed it. I can switch to the 2.4GHz band and it works flawlessly. This must be a software problem since it only started happening when I upgraded the OS.
Any help would be appreciated. Thanks!No it isn't, I have tried 4 different mountain lion machines connected to a 5Ghz and it works just fine. It is with your machine hence we need to fix it
create a new location and see if that fixes your issue, If not trash Macintosh HD/Library/System Configuration
That is a folder so trash it > restart the computer > create a new location -
When I click on Firefox I see restore session but no options to do so....cannot get firefox to load....it just sits and tries to run but will not load....I have uninstalled Firefox several times and downloaded with NO luck...help!
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls -
Upgraded to iOS5 and now cannot connect to iTunes Store
After upgrading to iOS 5, I cannot connect to the iTunes Store. I was having the problem at home where I was connected to my home network, and now when I'm not connected to a network.
Suggestions?This appears to be an Apple ID issue. I was forced to change my username to my email (which I had already done years ago) after searching and searching for reasons why my password all of the sudden didn't work on my iPhone. This started about 3-4 weeks ago.
So my password needed to be re-set when I tried to access my iTunes on my computer, and my iTunes balance disappeared. My username was still my email address (as it had been for years) but my gift card balance was gone and so was ownership of all my apps and music
Now, after upgrading to iOS5 my ONLY Apple ID now works with the re-set password, but it lost all of my apps. They are there, but when I go to update them through the iTunes store, I get that "cannot connect to itunes store" error message because after that weird 'update' to my Apple ID it seems to have lost all history I've had with Apple.
This is so upsetting, as I'm finding out that Apple does not allow recovery of these purchased items between these ID's. So, now I'm wondering where in the heck is my "old" apple id?? I can't sign in with my "old" info....
Lame. -
After upgrade to ios6 iPad does not accept password to wifi, I cannot connect to internet. Pls help me...
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have an iphone 4s and upgrade to ios6. It wont connect now after the upgrade to itunes and the itunes doesnt regonize the device. Im so freaking sad. Please somebody give me a fix. Why did I have to upgrade to ios6? Please somebody let me see the light.
I cant even get into itunes because it wont recognize it to do a reboot or a rollback.The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
How can you change apps store when you travel around the world?
After upgrading to IOS6, suddently my iPad has switch me to the greek apps store instead of leaving me into my canadian apps store.
Therefore, I cannot upgrade 60+ apps on my iPad.
Does someone know how to revert this situation?
Thanks for your help!Try this:
1. App Store>Feature>Apple ID (at bottom of page)
2. Tap on Apple ID>View Apple ID
4. Enter your password
5. Country/Region>Change Country or Region -
After upgrading to Yosemite, I lose my connect in SOAS, university of London. Overtime, it rejects me as Authentication fails in this network. Even the school technicianer cannot fix. I wonder how to downgrade or any solution? I never encounter this issue with Mavericks or the one before.
I also have the internet diagnostic report, but it is nonsense to me to read it.
-
After upgrading to Itunes 10.5 and connecting the IPAD. I get a following message. How do I resolve this issue. There is no other way to download itunes to ipad other than the itunes on your computer or laptop. I am a windows xp user.
Dear Mr. Sawyer,
To my surprise, the version is shown as 10.0.1.22. I will uninstall itunes and try loading the same again. After uninstalling do we need to delete any registry entries for Windows XP.
Thanks for your response and concern.
Regards
Amit Samel -
Apps store icon no longer available, book shelf will no longer access the store, and my mac pro will not sinc apps with my iPad. What's up?? How do I correct? This is after upgrading to iOS6 and Mountain Lion.
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
after upgrading to mountain lion I cannot use my HD TV as a display anymore using thunderport and HDMI , which worked before , does this mean I have to buy apple tv to mirror onto my HD TV
can it be something related to wi-fi? I have read other posts talking about loss of connection using wifi. I'm connecting my G5 through an airport express which is expanding my wifi generated from my Apple Time Capsule. It is quite difficult for me to relocate the server close to the Time Capsule and vice versa but if it works, at least that would be something. It was working with Lion about 3 months ago - showing up in Finder, etc.
Maybe you are looking for
-
How to load a class dynamically in the current/system class loader
I need to dynamically load a new jdbc driver jar to the current/system class loader... Please note that creating a new classloader will not help since the DriverManager refers to the systemclassloader itself. Restarting the application by appending t
-
I had a mirrored RAID where one of the drives failed. I've backed up the data and broken the RAID. I'd like to create a new RAID with the good drive from the old RAID and a new drive. When I create the RAID, will the Disk Utility ask me which driv
-
What's the use of Skype if it can't receive calls?
The community of Skype users have been struggling with this issue and its variations for years now: "iPad doesn't ring"; "iPad won't ring"; "Skype on iPad does not ring"; "Skype calls not ringing on iPad"... I am an iPad Skype user, and one of the re
-
Hi, I have moved country and because I have .82 cents in credit on my account it won't let me change country ? I have tried buying something in the hope that it will use my credit and just take the additional from the CC but that doesn't work. Any i
-
Hi all, In our Jdeveloper application, we have around 18 root application modules (with no nested application modules). For a new project, we want to build a another model project on top of this application. Is it possible to do so? and if so what ar