After upgrade to itunes 5.0.1 names of contacts won't display in messages or phone

Updated to iTunes 5.0.1 over wi-fi connection at home and now messages and phone calls only show number instead of name in contact list, how do I resolve this issue?

Operator error! The mute button was on.

Similar Messages

  • Help after upgrade to iTunes 7.5

    After upgrading to iTunes 7.5, my library is gone ... replaced with a blank library. The library files are where they are supposed to be, just empty. I searched my complete hard drive for a previous version of my library, but found nothing. I had copied all my music to my hard drive, so I didn't lose any music, just all my organization, artwork, playlists, etc. With 3,000 songs on there, it would take forever to re-build all that.
    On my iPod, everything's fine. My question is, is there any way to copy all the organization, name changes, artwork, playlists, etc. from my iPod back into the blank library on my laptop?
    If anyone has any ideas, I'd love to hear them. Don't want to spend hours and hours putting all that stuff back together!!

    Someone else may have a better fix, but see my posting under "Bush League Programming." Once I dumped 7.5 and reinstalled my previous version of iTunes, everything showed up just fine. Good luck.

  • Can't Recognized iPod device after upgrading to iTune 7 / 7.0.1

    After upgrading to iTune 7 (and later 7.0.1), my iPod Video 60G (firmware 1.2) has been having problems getting recognized by my desktop.
    Symptoms:
    - Device manager in Windows 2000 reports the device as an Unknown USB Device
    - The iPod won't get recharged nor sync'ed.
    - The "Do not disconnect" screen won't appear on the iPod.
    - Since Windows can't recognize my iPod at all, of course I won't be able to see it in iTune.
    I plugged the iPod to my Dell laptop and got it recognized and recharged properly though.
    After poking around for a long time, I figured that if I disable the USB 2.0 Enhanced Host Controller on my desktop (thru the Device Manager), I can finally get the iPod recognized properly. Problem is, now it takes forever for me to sync my iPod (USB 2.0 disabled, so I'm stuck with the slow USB 1.1)...
    I noticed that after upgrading to iTune 7, the display backlight on the iPod is kept on (though dim). If I remember correctly, on older versions of iTune, the backlight is completely off. I'm suspecting whether the extra current draw required by the dim backlight is screwing up my desktop USB....
    Anybody from Apple gonna look into the issue and consider turning the backlight back to off in the next release??
      Windows 2000  

    I have no problems on my Dell laptop... I'm having problem with my 4-year old non-brand-name desktop only.
    ... which is kinda abnormally 'cause normally you would expect USB 2.0 power problems on laptops only. Btw, I've got the latest drivers installed already for the chipset and Win2K etc...
    What's more interesting... is the fact that on older iPod firmware, everything was running just fine... upgrade to iTunes 7.0 and boom... I'm having problems. And, it's not recognized at the Windows USB device recognition level, so I think we can isolate the problem source to the iPod firmware upgrade.
    Seriously... my bet is on the extra power drain from the backlight being left on during USB connection...
    Guess i'll have to stick with slow USB until Apple has a new firmware...
    This latest upgrade is generating a lot of unhappy customers...... and the sad thing is, Apple did a bad job in backward compatibility and made it extremely difficult to downgrade to an older version of iTune / firmware.... Apple better get these fixed asap...

  • I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

    I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes.  The drivers are up to date
    Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
    Dell Inc. Latitude E6420
    iTunes 12.0.1.26
    QuickTime 7.7.6
    FairPlay 2.7.39
    Apple Application Support 3.1
    iPod Updater Library 12.0
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 8.0.5.6
    Apple Mobile Device Driver 1.65.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 3.06.0.2770
    Gracenote MusicID 3.06.0.2770
    Gracenote Submit 3.06.0.2770
    Gracenote DSP 3.06.0.2770
    iTunes Serial Number 756D13C00C3583C8
    Current user is not an administrator.
    The current local date and time is 2015-01-13 14:47:35.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 12.0.1.26 (x64) is currently running.
    iTunesHelper 12.0.1.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    LowerFilters: SbCeCd (3.2.6.3),
    UpperFilters: GEARAspiWDM (2.2.3.0),
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Drive is empty.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Audio CD in drive.
    Failed Reading table of contents, error 4000.
    Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
    Audio CD reading failed. Error Code:   87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
    iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
    Get drive speed failed. Error Code: 4000.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

    Hi iTunes-1,
    Welcome to the Support Communities!  The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.  
    iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
    http://support.apple.com/en-us/HT201852
    Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
    To run CD Diagnostics, follow the steps in this document.
    After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
    Here is an example of what section three might look like:
    In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
    If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
    If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
    Run CD Diagnostics again.
    Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
    Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
    Last Modified: Nov 8, 2014
    Also, you mentioned that you have been successful burning a CD with the Windows OS.  Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive.   Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
    I hope this information helps ...
    - Judy

  • QuickTime in Safari cannot play video after upgrading to iTunes 10.2

    After upgrading to iTunes 10.2 and QuickTime 10 on my MacBook Pro, the latest Quicktime version embedded in Safari is behaving strangely. When I want to play video on certain websites like " http://www.lynda.com/Aperture-3-tutorials/essential-training/59221-2.html ", the Quicktime logo on Safari browser appears and just sits there with sound only. I tried it on Firefox, the video can only be played on the lower part of my suddenly splitted screen, there is an "error" message on a Quicktime logo background.
    Could anybody help me solve the problem. By the way, all these videos can be played normally on my Windows 7 desktop using both Firefox and Safari for Windows.

    To make the matter more weird, the QuickTime plays normally on my Safari after I log out and switch to the administrator account of the MacBook Pro. When I change back to a normal account, the QuickTime error takes place again. It seems there must be something I configured wrongly.

  • After upgrading to itunes 10.5, and connecting ipad 2, message appears " IPAD cannot be used it requires itunes 10.5 or later. Go to itunes store and download the latest version." I am windows xp user.

    After upgrading to Itunes 10.5 and connecting the IPAD. I get a following message. How do I resolve this issue. There is no other way to download itunes to ipad other than the itunes on your computer or laptop. I am a windows xp user.

    Dear Mr. Sawyer,
                                To my surprise, the version is shown as 10.0.1.22. I will uninstall itunes and try loading the same again. After uninstalling do we need to delete any registry entries for Windows XP.
    Thanks for your response and concern.
    Regards
    Amit Samel

  • Anyone having issues with USB port power after upgrading to iTunes 11.1?

    After upgrading to itunes 11.1, I can no longer use the USB ports on my wired keyboard to synch my iPhone 4s, ipod Nano, and Ipad 2.  Previously, I could use this port to synch and charge the nano and iphone, and synch (but not charge) my iPad.  Now I simply get an error when I attach any of the devices ("a usb device needs more power").
    I currently use all four of the USB ports on the back of my imac (UPS power supply, aformentioned keyboard, a Lacie backup drive that has its own power supply, and a superdrive).  Interestingly, when I unplug the Superdrive (which is plugged directly into the mac on a separate USB port), the USB port on the keyboard will work.  Unplugging any of the other 2 devices does not allow the port on the  to work.
    I bought the wired keyboard to have the easily accessible UBS port to synch my nano as well as the fact I needed a number pad. 

    Get yourself a good self-powered 7 port USB hub to plug your extra devices into.
    Belkin International, Inc F4U041v - Best Buy
    PROVANTAGE: Belkin F5U237-APL-S Hi-Speed USB 2.0 7-Port Hub for Apple #TB857LL/A
    NewerTech USB2HB7PRO 7 Port Hi-Speed USB 2.0 Hub... in stock at OWC
    MacAlly TRIHUB7 TriHub - 7 Port Hi-Speed USB 2.0... in stock at OWC

  • Some mp3 files do not play after upgrading to iTunes 8.0

    some mp3 files do not play after upgrading to iTunes 8.0
    have upgraded and some songs which used to play on iTunes 7 no longer play. album art is missing. when trying to play on of these songs, nothing appears in the playbar at the top of the window.
    it seems the same problem exists in the mac os environment.

    The solution I discovered to fix this problem was to create a smart playlist with all song of a kind containing MPEG. Then I went through album by album, and coverted ID3 tags using the value of NONE. This then enabled me to play the songs in iTunes 8.0 and in many cases restored the Album Art.
    Thanks!

  • Lost music files after upgrading to itunes 7

    Hi, can someone please confirm whether or not my music files have been physically deleted from my computer after upgrading to itunes 7. Many of the songs in my playlist, including MOST of the songs purchased through itunes come up with the error that the original file can't be found. I've done searches and can't come up with the files.
    I want to know if they are indeed gone.
    I realize that you click "I agree" to the agreement before installing and as of now this "contract" has held up. However, we'll see how well it holds up when offered software is knowingly removing personal files. I'm sure that if someone were to write a virus that destroys your computer, if it had a warning message with an "I agree" button, it would be a very difficult contract to stand by.
    To my recollection, no software in the past has physically removed personal files from your harddrive on install.
    So, I don't think a precedence has been set for this kind of class action.

    and we refresh.

  • Lost iTunes Library after upgrading to iTunes 7.7 HELP PLEASE

    I have two issues on hand : after upgrading to iTunes 7.7 I opened iTunes and all of my music was gone except for about 1,000+ songs (3.2 GB) when I originally had about 20GB worth of songs. How can I recover my full library into iTunes ?
    Second issue: when importing new CDs into iTunes 7.7 it only plays a fraction of each song before moving on to another song, whereas iTunes shows that I have the full song imported.
    I really appreciate someone's help here, and does the latest version of iTunes have a bug ??

    Further to my last post, I find that the purchased songs have been retained in the iTunes Library of my Mac Book - is there any way iI can restore them to the iMac?

  • After upgrading to iTunes 9.2, unable to type in text/search fields

    Hi,
    After upgrading to iTunes 9.2, I am unable to type into text or search fields within iTunes.
    Haven't tried all fields, but I've seen it in both search in iTunes and the iTunes store, and also trying to create folders on my iPhone (through iTunes only, it works fine on the phone).
    Anyone else seen this or have an idea for a fix?
    Thanks...

    I'm wondering if you figured out this problem. I'm having the exact same issue, which means I can't even log in to my iTunes account. I've even tried uninstalling it and reverting to iTunes 9.1.1, which then won't even open.

  • After upgrading to itunes 7.3.1.3 I can't run the backup to dics anymore.

    After upgradeing to itunes 7.3.1.3.1 I can not run the backup any more. Also the CD burning runs very slow.
    The DVD burner run ok with other software.
    After it checks for file to be backed up it kept ejecting the blank DVD and asking for a blank disc.
    I have even replaced the DVD drive with drive from another computer.I also reinstalled ITUNES once-- It ran as a repair during the install.

    I have used this same DVD Burner to backup my list from within iTunes before. I did this back in June just after I purchase 30 songs. I think I was running version 7.1 or 7.2 when the DVD backup worked. If not sopport then why does their diagnostics say DVD/CD Diagnostics. Even so I have the same problem on my other PC with a CD Burner. I think Apple support sound a little like Microsoft. I once had a problem with Windows NT and had to call MS support 5 times before they said their software had a defect and issued a patch.

  • Problems after upgrading to iTunes version 6

    Hello,
    I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
    1. deleting sidb file
    2. doing the msconfig thing suggested in discussion boards
    3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
    iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
    I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
    Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
    I'm not sure where to go from here.
    Any help would be apppreciated -- I'd like to be able to open iTunes!

    Hello,
    I used Nickroo's post:
    I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
    There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
    UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
    DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
    RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
    It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
    This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
    Windows XP

  • TS2972 Home Sharing with ATV stopped working after upgrade to iTunes 11

    After upgrading to iTunes 11, my two PCs are no longer visible to Apple TV or the iOS Remote App.  I went through all the steps in "Troubleshooting Home Sharing" http://support.apple.com/kb/TS2972 without success.  In additions, I tried:
    Turning Home Sharing off, then on again on both PCs
    Re-created Firewall rules for iTunes
    Ran a factory reset on Apple TV
    Disabled iPV6 on the network adapter, based on a blogger's fix for an iTunes 10 problem
    Some other observations:
    Home Sharing was working with Apple TV an hour before I ran the updates for iTunes 11 and Apple TV. 
    The Apple TV and iOS Remote App are working together, so the network settings must be correct.
    The PCs in question are running Window 8 Pro 64-bit and Windows 7 Pro 64-bit
    The two PCs can see eachother's iTunes.
    It seems likely this is an iTunes 11 issue, but upgrading ATV2 at the same time clouds the diagnostics.
    I was just about to order two more Apple TVs, but now have second thoughts now that my ATV2 is just a doorstop. 
    Any suggestions? 

    You are not alone with issues related to the e1000e (but all they concluded was that reloading the module makes it work again):
    https://bbs.archlinux.org/viewtopic.php?id=145564
    It seems like this is more your issue:
    http://permalink.gmane.org/gmane.linux. … devel/8932
    But if none of those boot flags work for you, then there's not much you can do, and you'll have to write a script to reload the module each time after initial boot finishes I guess until the module gets fixed.
    Also, power management of the PCIe interface causes the e1000e to shut off after a while as well (lots of people on CentOS noticing this):
    http://serverfault.com/questions/226319 … ie-aspm-do
    So you can use that boot parameter to stop that from happening, if that becomes an issue for you as well.

  • Choppy playback after upgrading to iTunes 11

    I am still on OSX 10.6.8 so I can still use Front Row on my laptop. I just recently upgraded to iTunes 11 and now playback of video will become choppy and sometimes stalls and the sound will also become choppy and unsynchronized with the video. This occurs when playing video on iTunes or Front Row. Has anyone else experienced this and if so, have you come up with a solution?? Thanks in advance.

    I was also having this issue on my iMac running OSX 10.6.8 after upgrading to iTunes 11.  Clearing my user Library Cache seems to have solved the issue.
    In case you're not sure how to do that, open a finder window, hit Cmd-Shift-G to go to a folder, then enter "~/Library/Caches". Select all the contents of the Caches folder, and hit Cmd-Delete. You will be prompted to enter your password in order to delete these files.  Restart your machine and empty the bin when you log back in.

Maybe you are looking for

  • Can we associate index with foreign key?

    hello i have searched and could not find the answer to the above; i have a foreign key constraint on the tables; i added an index on that column as well; however when i query the all_constraints, under index_name for this foreign constraint there is

  • Rebate Volume Postings and Subsequent File Production

    Vendors are set up in SAP as suppliers and given a certain number range . We call these the purchasing vendors. The purchasing vendor represents a very big company (like ABCD) that has manufacturing plants all across regions with head offices in one

  • Conditions in Quotation not getting updated in Info record

    Hi, i have created & maintained a quotation having condition type as PBXX, CUIN & ZRA01 with info update indicator as "C" i.e. Update without Plant. When i maintain it & try to save it, system shows the message as "Followig types of conditions i.e. "

  • Never have a 3g connection??

    Hey guys. I am just wondering if this is a hardware issue, basically I have had my 3GS for around 3-4 weeks now, and not once since I bought it have I EVER had a 3g connection, just always edge (E) or limited (o), or wifi (at home). Now I know for a

  • Mac OS X version 10.5.8 how do I upgrade the version?

    I have a Mac OS X version 10.5.8 how do I upgrade the version?