After upgrade to Maverick Mail does not connect to server to download emails

Since I have had my system upgraded to Maverick I can no longer download emails from my server/provider. Mail asks for the password for the user (me) and when I type it in nothing happens.
There is no problem connecting to my server/provider online, so the server is working ok. My guess is that I am missing some crucial ticked or unticked box in the mail set up. I just don't want to mess around with it without knowing what I need to do. If anyone out there has a solution, pls send a step by step.
Any help appreciated, replies might be slow - like I said, no email alerts of mails getting through at the moment (so have to read everything only when I'm online...).

Restart your router and your broadband device, if they're separate. If there's no change, see below.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • After upgrading to Mavericks, iPhoto does not work

    I have an iMac early 2011, with dual hard drives. After upgrading to Mavericks, iPhoto and several other apps are no longer "installed". The following apps have a white circle with a line through it in my main Applications folder on my primary hard drive: Calculator, Chess, Font Book, iChat, iPhoto, Mail, Photo Booth, Preview, Safari, System Prefernces. Also, under the Utilities folder, these are inaccessible: Activity Monitor, System Information, Disk Utility.
    I tried following this thread's advice: https://discussions.apple.com/thread/5539268
    I had iPhoto 9.3.2 on my main drive. I downloaded the 9.4.3 upgrade from here: http://support.apple.com/downloads/#consumersoftware
    When I try to install, I get the following message: iPhoto 9.1 or later is required to install this update. Where did my software disappear to?
    Every Apple upgrade so far has been a nightmare. A previous upgrade of iPhoto bricked the computer and had to bring it to professionals to fix. I am dreading the 10.9.2 "critical upgrade" for the OS that keeps poping up. The Mavericks upgrade also wiped out my Adobe Creative Suite install and several other apps.
    Any help would be greatly appreciated.

    You need iPhoto ver 9.5.1 to be Maverick compatable.
    Use the software update, look for the new app in your Applications folder along side your old versions of iPhoto. Drag the new icon down to the Dock.
    Moving from 10.6.8 the old PowerPC apps are no longer supported. I believe Lion you could still run  the Rosetta to keep the old ppc apps alive. No more with Mountain Lion and now Mavericks. Sooner or later you have to keep up with technology and keep apps up to date.
    https://discussions.apple.com/docs/DOC-6161

  • Since I upgraded to Mavericks Mail does not work at all

    I upgraded to Mavericks yesterday (10.9.1) and now Mail simply will not work. The first time I opened the app it said it was upgrading messages and spent a while working on that. I did not interrupt the process but then it crashed and now it does not even start up.
    I have repaired disk permissions and restarted in Safe Mode but it didn't help.

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Since upgrading to Mavericks, Mail does not display the count of unread messages

    Hi,
    I upgraded to Mavericks from Snow Leopard (on a Macbook Pro mid 2009) when Maverick went out.
    Since then the count of unread messages in the Inbox is not displayed on the Dock Icon, nor in the app itself (the label Inbox does not change to bold with a count of unread messages when I do have unread messages).
    I did when to see the preferences of the app to see if the move from Snow Leopard to Maverick changed anything but I could not see anything odd.
    Anyone having the same problem?
    Thanks in advance.
    Cheers,
    Martin Monnier

    You have posted in an Exchange Server forum, not a Communigate forum.  I recommend that you post in a Communicgate forum, or you can try the Outlook forum: 
    http://social.technet.microsoft.com/Forums/en-US/outlook/threads
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • After upgrade to ios6 iPad does not accept password to wifi, I cannot connect to internet. Pls help me...

    After upgrade to ios6 iPad does not accept password to wifi, I cannot connect to internet. Pls help me...

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • After upgrade to Mavericks mail is crashing when I try to search for an email in a mailbox

    After upgrading to Mavericks, mail is crashing when I enter a sender name in the search box to search for emails from that person.

    https://discussions.apple.com/message/23512376#23512376
    re index
    search not working so well: Try this: Quit Mail > then > Move ~/Library/Mail/V2/MailData/Envelope Index to the desktop > Re-open mail and see if that fixed it
    some are recommending above

  • After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.)

    After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.) Help.

    thankyou. THANK you.
    thankyouthankyouthankyou!
    sorry about no screenie but the first option worked (at least so far!)
    THANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOU

  • Mail does not connect to mail servers after 10.5.7 update

    Updated Macbook Air with 10.5.7 update. The update went without problems.
    After starting the computer, the Mail program does not connect to the mail servers - IMAP, POP, SMTP.
    Otherwise the internet connection is OK for other programs, connection is through WIFI - Airport Extreme, Time Capsule... In all cases the same problem with Mail - showing the following
    The server error encountered was: The connection to the server “mail.mac.com” on port 993 failed (error 1: Operation not permitted)
    The connection doctor shows
    Mail was able to connect to the internet
    and for all the servers - could not connect, check your connection...
    Did repair of keychain and permissions - no change in status of Mail... any ideas?

    This is what shows up in console: (maybe someone who can understand this can help us!)
    15.05.09 16:38:26 Mail[1478] GET /internetservices/issupport/1_27a4cv2b6061/clientConfig.plist (FAILED), httpStatusCode:-1, errorType:100 (domain=NSPOSIXErrorDomain, code=1), transactionState:5, txnId:2F42C0AC-8189-4309-B914-AB3759688961, auto-retries=2, manual-retries=0
    15.05.09 16:38:26 Mail[1478] GET /internetservices/issupport/1_27a4cv2b6061/clientConfig.plist (FAILED), httpStatusCode:-1, errorType:100 (domain=NSPOSIXErrorDomain, code=1), transactionState:5, txnId:DD2C955C-DAD7-4CAF-BFD7-79B75F6C93E0, auto-retries=2, manual-retries=0
    15.05.09 16:38:27 Mail[1478] POST /Info.woa/wa/XMLRPC/accountInfo (FAILED), httpStatusCode:-1, errorType:100 (domain=NSPOSIXErrorDomain, code=1), transactionState:5, txnId:D4B63982-058D-4AF4-ADBB-CF84E9DDE8EF, auto-retries=2, manual-retries=0
    15.05.09 16:39:32 Mail[1485] GET /internetservices/issupport/1_27a4cv2b6061/clientConfig.plist (FAILED), httpStatusCode:-1, errorType:100 (domain=NSPOSIXErrorDomain, code=1), transactionState:5, txnId:13DE143D-0FE5-443B-834E-253082F0E448, auto-retries=2, manual-retries=0
    15.05.09 16:39:32 Mail[1485] GET /internetservices/issupport/1_27a4cv2b6061/clientConfig.plist (FAILED), httpStatusCode:-1, errorType:100 (domain=NSPOSIXErrorDomain, code=1), transactionState:5, txnId:EAE08B1B-6DEE-459B-8903-0E4700B3087B, auto-retries=2, manual-retries=0
    15.05.09 16:39:32 Mail[1485] POST /Info.woa/wa/XMLRPC/accountInfo (FAILED), httpStatusCode:-1, errorType:100 (domain=NSPOSIXErrorDomain, code=1), transactionState:5, txnId:ABEB15F4-5650-4230-BDA8-ED1512B59443, auto-retries=2, manual-retries=0

  • After upgrading to Yosemite iPhoto does not open

    After upgrading to Yosemite iPhoto will not work. Does not work even after installing iPhoto Library Upgrader. Any suggestions

    Does not work even after installing iPhoto Library Upgrader. Any suggestions
    You not only have to download the iPhoto Library Upgrader but you also have to run it on the library.  It'll be in the Applications/Utilities folder.  Double click on it to launch and it will automatically locate the last library you worked with and convert it.

  • TS3276 OS X Mavericks Mail does not sync with Exchange Server

    After moving to Mavericks, mail, contacts, anc calendars do not sync with our exchange server. It will set up the first time and then stop sycning. Is there a way to delete the mail app and reinstall. All other Apple devices sync with the exchange server with no issues.

    It was my DNS settings. I had my Airpot pointing to OpenDNS, and for some reason iCal and Address Book could not find their way to my exchange server. I changed the setting to use my ISP's DNS and now everything works fine.

  • Can't get my mail say not connect to server but I'm on facebook

    Cant get my mail says not connected but on facebook

    Please provide more information about the issue you are experiencing. What mail provider? What is the exact error? Do you mean that you can get onto your Facebook page via the internet? How do you see these as being related?
    Cheers,
    GB

  • In e mail can not connect to server i fill out the info and get this

    when i try to get e mail i get "you can configure e mail in just a few steps" when i follow the directions i get"can not connect to server"? thanks

    On another note Im just checking the external and internal web server names on my server just to be sure that its not an internal server issue - here is the weblink I have been going through - I will test and let you know .
    Mac Mail is set to auto discover the settings http://premnair.wordpress.com/2010/07/03/configure-ews-autodiscover-owa-oab-ecp- on-exchange-server-2010/

  • Mail account not connecting to server

    Email on iPhone 5 not connecting to server even though setup is identical to another hone that works.

    Try deleting the account and then adding back.

  • Does anyone know why after upgrading to Mavericks, Safari will not display PDF files, is there a solution?

    I cannot get Safari to display PDF files, it shows a blank screen with the comment that Safri has blocked PDF, however when you unblock it still does not show the PDF, I have had to rely on Firefox for this, which I find not too good. Any help very much appreciated.

    Update to 10.9.1
    Adobe Reader
    http://helpx.adobe.com/acrobat/kb/blocked-plugin-alert-safari-7.html
    Best.

  • After upgrading to Mountain Lion does not to wake up from sleep

    I just upgraded my Mac Book Pro mid 2009 from Lion to Mountain Lion. Everything is ok, but when I try to wake up it from a sleep, white dots fill, only last one remains grey and machine stay forever.
    I really appreciate any suggestions.
    Many thanks!
    Sandro

    My suggestion is that you reinstall Mountain Lion:
    Reinstalling Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Mountain Lion: Select Reinstall Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Maybe you are looking for

  • I bought iphone 3gs from japan now its not working in Nepal what do i do now

    so what should i be doing do apple help me or should i go with unlocking software if yes how to make the iphone now work in nepal thanks

  • Looking for Users but Terminal says No such file or directory

    Hi I'm trying to delete something out of my DVD Studio Pro cache but when I look for the Library it has gone. I've tried calling it up in Terminal with 'chflags nohidden ~/Library' and it comes back with No such file or directory. Has anyone lost the

  • HELP: Run-time array dimension in LabVIEW formula node

    I need to dimension an array at run time within a formula node as follows: int32 i,N; N = sizeOfDim(inputArray,0); float64 outputArray[N]; for (i = 0; i outputArray[i] = myfunction(inputArray[i]); However, LabVIEW complains "Formula Node: index list

  • 3 inch cd - HELP!!!

    Duh, put a 3" CD into the the drive. Didn't need to,  but . . . . It does not show on the desktop, or in Disk Utility. How can it be ejected? Thanks! Gottsheer

  • Condition Types used in a particular country

    Hi Experts, I am trying to pull a report of changes made to the condition types using VK13. Before doing this, I would like to know what are the condition types used for a particular country. How can I find out the condition types used for a particul