After upgrade to Mountain Lion I get the message "AppleWorks 6.app ...no longer supported".
After Mountain Lion upgrade, I get this message: "You can't open the application "AppleWorks 6.app" because PowerPC applications are no longer supported". How do I access the considerable data I hhave in AppleWorks?
Here is a post that I assembled for a similar question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.
Similar Messages
-
Hello, I've just bought a Mac compatible Passport Air external hard drive, which is supposed to be compatible with the OS I am using (Mountain Lion) but I keep getting an error message saying Unable to complete backup. An error occurred while creting the backup folder. I've tried all the help suggestions, but nothing with this actual message comes up - it appears to be partititioned correctly etc, so don't know what I'm doing wrong - any help would be greatly appreciated thank you.
Were you not plugged in via USB to begin with?
I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379 -
What is speechsynthesisserver.app? Twice I received a message from Mountain Lion that this could not be installed due to an error. Is this significant?
Regarding the scrolling, SYSTEM PREFERENCES>TRACKPAD>SCROLL & ZOOM, uncheck 'Scroll direction: natural.
Ciao. -
Why did I lose my Bookmarks?
Clarification:
I believe now you potentially lose all extensions, plug-ins when you use the new reset function, but you will let me know.
If that is the case, your find corrupt file method maybe better. However, I reviewed the two help articles and there appear to be more files than just the delete search.json file and a possible search.sqlite file in the Firefox Profile Folder. I am confused. Then I have to find the folders. I think help articles mentioned how to find the profile containing the files, but not sure. -
After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I've read through several posts that all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist. Any solutions or suggestions?
Did you upgrade from SnowLeopard?
I can't get passed the complete installation
What exactly is happening? Is GarageBand trying to download over and over again?
all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist.
The property list stores your preferences, but also the settings from the last run of the application. If that file is corrupted in some way, you might see third behaviour.
You must have this file, for it will be recreated automatically, if it is missing, or you have a permissions problem with your user library.
Perhaps you did look in he wrong place.
in MacOS 10.7. or later the User Library is hidden. To find the Preferences Files use the Finder's "Go" menu:
Quit GarageBand, if it is running.
Click onto you Desktop to bring the Finder forward.
In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
Log off and on again (don't skip that step!). Retry GarageBand and see if it GarageBand is now downloading the missing content properly.
If that does not fix the problem, post back and explain in more detail what the download problem is.
Why did you "repurchase" GarageBand? If you already owned GarageBand '11, it should be unnecessary.
Regards
Léonie -
After upgrading to Mountain lion the hyperlink button is not seen in Preview. Anyone knows ho to get it back?
Augend wrote:
After upgrading to Mountain lion the hyperlink button is not seen in Preview. Anyone knows ho to get it back?
There have been a few threads about this. The feature seems to have gone missing in Mountain Lion even though the Help for Preview still mentions it.
I've filed a bug report on it.
Matt -
my name now appears on the upper right hand corner of my display after upgrading to mountain lion.. is there a way to get rid of that?
In System Preferences > Users & Groups > Login Options (below the list) > click the padlock and authenticate > Uncheck Show fast user switching menu as: or you can change it to icon.
-
After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5) -
after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.
Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
After upgrading to Mountain Lion my deleted emails keep coming back. I cannot get rid of them.
After upgrading to Mountain Lion my deleted emails keep coming back. I cannot get rid of them.
Hello waybk,
Thank you for using Apple Support Communities.
For more information, take a look at:
Configuring Mail for your email account
http://support.apple.com/kb/ht1277
Check if Mail> Preferences>Accounts> and set the Mail to Delete from the Server
Have a nice day,
Mario -
After upgrading to mountain lion, the movies/slideshows I create using iDVD playback in a jolting start/stop manner. This didn't happen with the prior os - playbacks were flawless. Any ideas, short of uninstalling mountain lion, on how to correct?
I know this is not much help. IDVD and Mountain Lion are working perfectly for me. I know many others that use Mountain Lion with iDVD also.
I think your problem lies elsewhere. -
After upgrading to Mountain Lion my 2009 (early 2010) iMac mutes audio when awaking or when it goes to sleep. Anybody else having the problem? My other iMacs are not having that problem. I'm not sure if I am missing an option somewhere or what is going on.
http://www.reedcorner.net/understanding-upgrade-nightmares/ (Thomas)
See if you have supported applications > http://www.roaringapps.com -
The Airplay Icon is not showing up on My Taskbar After Upgrading to Mountain Lion
Please help. I have 2nd generation Apple TV and a 2011 Imac but the Airplay Icon will not show up on Taskbar after upgrading to Mountain Lion.
Finally after trying to uninstall/reinstall (no luck!)
I'm on Windows 7 64 bit. iTunes 10.7 And I have a solution:
If found a thread about IPv6.
I followed the same directions on Windows 7 64 bit and it worked.
Disable IPv6 on _all_ of your IP ethernet adapters.
That includes Virtual Machines (VMWare... yes those too), including IPv6 for wireless.
Close iTunes. Start iTunes. Works. Airplay Icon is back.
It looks like All of the AirPlay devices may have to be re-setup. At the very least rebooted.
I found that I had to clompletely erase my DHCP addresses from my (non Apple) router.. and that fixed it. Finally.
Even though this is for the Mac... I believe they are onto something. Original thread link:
http://mactips.dwhoard.com/mactips/other-applications/fix-airplay -
When upgrading from osx 10.7.4 to osx mountain lion I get the following Alert! This update requires OS X version 10.8.
Sounds like you downloaded the 10.8.1 update instead of the Mountain Lion installer from the Mac App Store.
You have to purchase Mountain Lion from the App Store to get to 10.8 -
After upgrading to mt lion, i lost the option to 'empty cache' on my safari browser. This interferes with some playing pogo games and other issues related to Java. How can I get the option back or how do I empty the cache?
Go to Safari > Preferences > Advanced and check Show Develop menu in menu bar. Then it's in the Develop menu.
Maybe you are looking for
-
IOS 5.0.1 upgrade on iPhone 3GS,
Prior to iOS 5.0.1 upgrade on iPhone 3GS, I could readily connect to and use a variety of wireless networks at home, work, and on road. Since installing the upgrade as prompted on device, I find WiFi is unstable to unusable. Unless the device is sitt
-
Bizarre import problems in both iPhoto and Aperture
Not sure how to explain this one ..... Tried importing photos (raw) from Cannon D10 into Aperture. Failed to import a significant number and gave a message saying that the following files were not able to be imported - but the list was blank! So I tr
-
Payment advice note to vendors thru e mail
Guys, After executing F110, system generates the payment advices.I updated the master reocrd of vendor with a test email id , system is sending payment advices to this mail id,as its our internal server mail id.But when I update vendor record with so
-
Facetime Camera don't work after 10.9 OS X (Macbook Pro Retina June 2012)
Tried to use both Photobooth and Facetime but the computer can't detect the camera. Anybody else having this problem?
-
Which is better TimerTask or Thread????
Hello! I have a server-client application. Every client that access the server is assigned a corresponding sleep time (the sleep should be done in a separate thread) before proceeding to their "special task". My problem is for example i have 1000 cli