After upgrade to OSX 10.9.2, my wifi is not working

after I upgraded to OX S 10.9.2, my wifi is not working properly. When I connect to the internet via wifi, the wifi disconnects in seconds.
But if I connect to the internet on my phone, it works.
What can be the problem?

You might:
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Similar Messages

  • After upgrading to IOS 8 my iPhone 5 wifi is not working well at all .. and can't connect to any of apple services like apple store even can't upgrade my application

    After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application  .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise

    Hey ahmedfromtanta,
    Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Troubleshooting Wi-Fi networks and connections
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • After upgrading from 4.6C to ECC 6.0 templates not working in smartform

    Hello,
    After upgrading from 4.6C to ECC 6.0 templates not working properly in smartform, although value is flowing to the point the template is getting called and inside the template there are text elements where placeholders are kept to display the value, when the print is taken there are no values being displayed by the text elements.
    Please note - Text elements doesnot have any conditions present in the condition tabstrip.
    Thanks,
    Abhishek

    Hi,
    After the upgrade, you will have to do the security upgrade.
    Please follow these steps.
    1. Go To SU25
    2. Run step 2A to 2D.
    3. In step 2C, you shall get the list of all the affected roles.
    Click on first role. It will take you to authorizations of that role. Click on the "New" tab there to find the new objects added to the role after the upgrade.
    Note: You can open the same role in the unupgraded system to check.
    4. Provide the access to the required authorization objects.
    5. Disable the unwanted authorization objects.
    6. Generate the profile.
    7. Follow the same steps for all the affected roles listed.
    Please note that you will have a list of new objects added.You need to maintain them inorder to avoid any access issues.
    8. After step 2C, complete 2D.
    Regards,
    Imran

  • After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out

    After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out.  There is no function at all.

    Ok I fixed the issue, turns out a couple of weeks ago, I downloaded a program that was suppose to help shrink some of your stuff to use less data, it was called Onavo.  It was suppose to show you how much data you use to help keep you within your limits.  If you have downloaded this, go through your settings and delete it and it will fix the problem.  At least it did for me.  I can now send photo's to non Iphone users via text no problem.

  • After upgrading to maverick my epson WF-2540 scanner will not work. There are no upgrades showing so what do I do?

    After I upgraded to Maverick my Epson WF-2504 scanner will not work.  There is no software update showing necessary either. I have gone to the Epson website but it doesn't offer a download.  It tells me to go to "software update" ???  Any suggestions?

    Thanks Arthur,
    I was hoping for a good bubble bursting, but I tried that HP "update" as soon as my printer stopped responding. I really really wanted my bubble popped.
    One needs the Apple supplied driver for this work. It will not work because the driver to basically function on the updated Mavericks is not supplied by Apple Updates, so the HP driver that stops printing an extra page is rendered useless. I spent, wasted two days going back and forth between Support threads, HP chat and on the phone, through all the Mac channels where I was told that the 2011 HP was antique. HP said Apple had the drivers. So, they pointed a finger at one another with this unlucky customer caught in the crossfire. HP said Mac did it and Mac said HP did it. BOOM ! goes the guy in between who spent a good bit of money to have good equipment. What is wrong with expecting a printer to last beyond 3 years, or for a back up drive to last more than 3 years?
    I do appreciate the attempt to help though. It was here in Discussions where I was guided to the gimp driver, drivers which in the past always worked when needed but in this case something wicked about Mavericks prevents it from working. No matter how many times HP says it works on their site all you have to do is try and then speak with customer service to find out that in a parellel universe this may logically hold. It does not hold here.  If it were the case that by working in Lion it would work in Mavericks then there must be something wrong with me. But why, APPLE, is it that one day it works, do the update and then it does not when Lion was the previous OS? I did Everything, every single thing recommended by people who had good ideas and wanted to help but all too often the facts tell us nothing of the world. Facts are tools used to decieve, the world is where it works or does not work and in this case Mavericks has cost me close to $300. Probably not a big deal in some cases, but money is money. When it is gone it is gone.
    I followed the complete uninstall, going into library and removing all HP, then restarting and lo and behold HP driver for 4500 not only was not present but along the way my 500gig back up drive died, as in dead, nothing.
    Of course I will not buy another HP product. If you go to the list of drivers Mac says it carries the HP Officejet 4500 wireless may be present but is not carried by Apple. I have tried Apple update over and over. What I have done is wasted my time and money. In one fell update I lost a printer and a back up drive. No storms, no loss of electricity, no boogie men lurking, no malware, no gremlins, nothing but an innocent customer updating when Apple said "update". Sure it is serendipity that both my printer and back up drive died on the same day at the same time following the Mavericks update. Who am I but a loyal customer? I must be stupid because my equipment stopped responding after the update. It is not new that there are bugs and glitches following updates. I was a beta tester for OS X, it wiped my computer clean, but I understood, it was beta.
    A friend told me the same about planned obsolescence in that since printers are cheap and ink is expensive they don't really care about customer satisfaction. Three years old is antique, out of date. We should and must all be angered by this hatred for the customer shown by manufacturers across the board. Blaming the customer is ridiculous and absurd but not unheard of, in fact it has become the rule of thumb from the other side. The customer is innocent. All we want is to buy premium equipment and to have it behave in a manner befitting the cost. I am an Apple user since 1994. I designed a restaurant on a 333 mhz black and white Mac. You know, the big floppy disc one. I am not new to Apple. Fiercely loyal for 20 years. This is the most angered I have been by the flippant attitude shown to us all.
    Thank you for giving the links and hopeful advice. I tried them all when I first had the troubles. The good people in discussions, not the Apple plants, but the users, tried their best. I thought that by coming back later there would be updates and new links that would help. But no. Maybe one day. HP lost a customer, it means nothing to any of the manufacturers when a customer is ridiculed by their cynical attitude towards the customer. Maybe there will be someone else to come along here that has had similar experiences and found a way to fix. Used to be a gimp driver could do the trick. Used to be a way. I fear we lose control of our equipment more and more every day. This is not a rant. It is a somewhat sad expression of having been ripped off. Discussions here have helped in the past but the more things advance the less we matter. And as in the past when I was mad about an Apple failure a member sent a fix and I printed the fix for others to use in return. We help one another in the best of ways. Please spread the word, maybe there will be a fix to show up here sometime. I kissed my iOmega back up drive and the 500 gigs of writings, photos, backups and music goodbye, gone forever, poof! But the HP printer is still here on my desk. I don't want to give up hope.

  • After upgrade to Yosemite, drag and drop for files does not work, destination folder crashes.

    After upgrading to Yosemite, dragging and dropping files from one location to the destination folder, causes the destination folder crash. However, copying the file and then moving it works fine.
    I'm not sure where to report bugs, but I figured this would be the best option

    http://www.apple.com/feedback/  Feedback
    https://bugreport.apple.com/  BugReporter

  • After upgrading to itunes 7.3.2 system sound does not work

    I recently upgraded my itunes to 7.3.2 and the sound worked for a short time. it then began to cut on and off until ceasing to work completely after a day or so. I have run diagnostics and my computer can produce sound, but not in any programs or any of the system sounds. i reinstalled windows xp and the sound worked, but when i installed itunes again the sound once again stopped completely. i have checked all the drivers, codecs, hardware etc. and they seem to be in order. what is going on?

    I really struggled with this one and my IT people couldn't help.  They suggested that I add my secure corporate website to the Java Exceptions Sites, and use the Java client, but that didn't work.  I tried the CITRIX Native CLient (ICA Client) and that didn't work either.  So, I searched my Mac for all of the instances of CitrixICAClient, or anything else with ICA in it.  I then deleted all of those files, shut down Safari, rebooted my computer and tried again to log into my corporate site using the Native Client conenction option.  I remembered from years ago, that the first time you try to connect using the native client, that Citrix plugin is downloaded.  THat's exactly what happened and I haven't had any more problems.  So apparently, you have to clean up a little adn make sure that any "old" citrix products are removed.

  • After upgrading to mavericks my epson scanner v 600 does not work

    After upgrading to Mavericks my scanner V600 epson does not work, I keep getting a message to re-install the software, but even then is does not work

    I'm having the same issue. The scanning software doesn't launch, the scanner appears in system preferences after a few unplugs and plugins, and software update doesn't give me the recommended ICA update.
    Also the Epson scan utilities aren't updated either and will be "released soon" according to here:
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 139863&prodoid=63084673&infoType=Downloads&detected=yes&platform=OSF_M_X9
    They recommend to use image capture (which is a joke) in the mean time or you could buy vuescan but thats not much better for some things.

  • After upgrade to 10.4 thumbdrives/cdrom/ethernet port do not work

    so after upgrading a powerbook from 10.2 to 10.4 thumbdrives don't automatically mount and cdroms don't show either..
    I can go through disk utility and mount the thumbdrive manually .. but then when I take it out and put it back in it does not work ..
    in the finder menu preferences .. i have select to show all items in on the desktop ..
    is this some kind of library or permissions issue
    powerbook g4   Mac OS X (10.4)  

    I tried this after a nudge from Carolyn Samit.
    It was a bit trickier than that: I had to delete the current icon in the Dock and then move the Address Book app OUT of the Applications Folder and then it opened.  Then I put it back and all is well.
    I have since discovered all sorts of "gray" .apps (like PhotoBooth.app) that won't open through the Applications folder.     But it will open from the icon in the dock.    Hmmmm.    Is this a Library thing?
    Thank you, Carolyn, for getting my Address Book "back" !

  • After upgrade to 4.3.3 my iphone 3gs ipod not working

    Please.can someone suggest possible fixes for this problem. I have just upgraded the software on my iphone 3gs to version 4.3.3
    and discovered the ipod function not working all the content is still listed but when I try to play a song it just throws me back to the main menu
    after about 3 seconds. What can I do? Have searched this forum and searched online but have not come across a user with the same problem.
    Any advice gratefully received.

    After upgrading to the latest iTunes version (9.2.0.61), iTunes does not recognize my iPhone.
    I have tried:
    switching cables,
    switching USB ports,
    restarting computer,
    repairing iTunes,
    uninstalling and downloading 64-bit version then installing,
    uninstalling and downloading Windows 7 version then it would not install,
    verified that AMDS had started,
    restarted AMDS.
    I have tried all of these things at various times and in various orders. I did get iTunes to see my phone once, but because I have been working on this a few hours, I don't remember the sequence I used. I do know that when I closed and restarted iTunes it no longer recognized my phone again.
    I connected my iPhone to a different computer that does have iTunes latest version, (9.2.0.61) and it was recognized. That computer is a HP Pavilion a6530f PC running Windows Vista Ultimate 64-bit version.

  • MacBook can't see my home wireless network after upgrade to OSX 10.8.5

    After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

    It appears an SMC reset was required:
    HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
    Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
    If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

  • Upgraded to iOS5.1 and now video out is not working. How do I fix this?

    After upgrade to iOS 5.1 the video out is not working! Anyone have this problem? Is there a fix for this? 

    OK so I went to the Apple Store and they said my cable was a third party cable. We tried an apple cable and it worked! So Apple changed the pin out configuration on the OS 5.1 upgrade so only Apple cables will work! So I had to shell out another $40.00 to get that cable!

  • After upgrade to OSX Mavericks my 2009 MBP keeps crashing due to kernel panic

    After upgrade to OSX Mavericks my 2009 MBP keeps crashing due to kernel panic (happens every 20 minutes or so). Please help me with this, it's getting very frustrating. Have tried disk utility, there were errors (file system was corrupted), the disk utility managed to repair the disk but the crashes continue.
    Etre-check:
    EtreCheck version: 1.9.12 (48)
    Report generated 26 juli 2014 12:29:37 CEST
    Hardware Information:
      MacBook Pro (13-inch, Mid 2009) (Verified)
      MacBook Pro - model: MacBookPro5,5
      1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
      8 GB RAM
    Video Information:
      NVIDIA GeForce 9400M - VRAM: 256 MB
      Color LCD 1280 x 800
    System Software:
      OS X 10.9.4 (13E28) - Uptime: 0 days 0:14:20
    Disk Information:
      FUJITSU MJA2160BH FFS G1 disk0 : (160,04 GB)
      EFI (disk0s1) <not mounted>: 209,7 MB
      Macintosh HD (disk0s2) / [Startup]: 159,18 GB (26 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      HL-DT-ST DVDRW  GS23N 
    USB Information:
      Apple Internal Memory Card Reader
      Iomega Iomega 500,11 GB
      EFI (disk1s1) <not mounted>: 209,7 MB
      IOMEGA (disk1s2) /Volumes/IOMEGA: 499,76 GB (499,32 GB free)
      Apple Inc. Built-in iSight
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Gatekeeper:
      Mac App Store and identified developers
    Kernel Extensions:
      [not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
      [not loaded] com.caiaq.driver.NIUSBGuitarRigMobileDriver (2.4.23) Support
      [not loaded] com.caiaq.driver.NIUSBHardwareDriver (2.4.23) Support
      [loaded] com.fortinet.fct.kext.avkern (1.0.1 - SDK 10.7) Support
      [not loaded] com.fortinet.fct.kext.fctapnke (1 - SDK 10.7) Support
      [loaded] com.fortinet.fct.kext.fctwfnke (1.0 - SDK 10.7) Support
      [not loaded] com.fortinet.kext.fctrouternke (1 - SDK 10.7) Support
      [not loaded] nl.bjaelectronics.driver.PL2303 (1.0.0d1) Support
      [loaded] org.virtualbox.kext.VBoxDrv (4.2.12) Support
      [not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.12) Support
      [not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.12) Support
      [loaded] org.virtualbox.kext.VBoxUSB (4.2.12) Support
    Startup Items:
      ChmodBPF: Path: /Library/StartupItems/ChmodBPF
      HWNetMgr: Path: /Library/StartupItems/HWNetMgr
      HWPortDetect: Path: /Library/StartupItems/HWPortDetect
      M-Audio Firmware Loader: Path: /Library/StartupItems/M-Audio Firmware Loader
      StartOuc: Path: /Library/StartupItems/StartOuc
      VirtualBox: Path: /Library/StartupItems/VirtualBox
      wpa_supplicant_srv: Path: /Library/StartupItems/wpa_supplicant_srv
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.fortinet.forticlient.appfw.plist Support
      [running] com.fortinet.forticlient.epctrl.plist Support
      [running] com.fortinet.forticlient.fmon.plist Support
      [running] com.fortinet.forticlient.servctl.plist Support
      [loaded] com.fortinet.forticlient.vpn.plist Support
      [running] com.fortinet.forticlient.wf.plist Support
      [not loaded] com.teamviewer.teamviewer_service.plist Support
      [loaded] org.macosforge.xquartz.privileged_startx.plist Support
    Launch Agents:
      [not loaded] com.teamviewer.teamviewer.plist Support
      [not loaded] com.teamviewer.teamviewer_desktop.plist Support
      [loaded] org.macosforge.xquartz.startx.plist Support
    User Launch Agents:
      [failed] com.adobe.ARM.[...].plist Support
      [running] com.spotify.webhelper.plist Support
      [not loaded] org.virtualbox.vboxwebsrv.plist Support
    User Login Items:
      FIREBOX Control
      iTunesHelper
      Dropbox
      Emil
      NIHardwareAgent
      FortiClientAgent
    Internet Plug-ins:
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      CitrixICAClientPlugIn: Version: 11.1.0 Support
      Silverlight: Version: 4.1.10329.0 Support
      iPhotoPhotocast: Version: 7.0
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
      Citrix online plug-in  Support
      Flash Player  Support
      Native Instruments USB Audio  Support
    Time Machine:
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 148.25 GB Disk used: 124.04 GB
      Destinations:
      IOMEGA [Local] (Last used)
      Total size: 0 B
      Total number of backups: (null)
      Size of backup disk: Too small
      Backup size 0 B < (Disk used 124.04 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          8% mds_stores
          4% com.apple.WebKit.WebContent
          2% Safari
          1% WindowServer
          1% diskimages-helper
    Top Processes by Memory:
      190 MB mds_stores
      106 MB com.apple.WebKit.WebContent
      98 MB Safari
      90 MB com.apple.IconServicesAgent
      82 MB Dropbox
    Virtual Memory Information:
      4.64 GB Free RAM
      1.52 GB Active RAM
      947 MB Inactive RAM
      684 MB Wired RAM
      1.20 GB Page-ins
      0 B Page-outs

    Hi, thanks for the reply. I deleted some of the old stuff that showed up on the report (have removed virtual box long ago but some residual files were apparently left). It didn't help though. Will remove forticlient too as a test.
    Meanwhile here's the new etre-check and crash report:
    last crash:
    Anonymous UUID:       xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    Sat Jul 26 13:21:42 2014
    panic(cpu 1 caller 0xffffff801a2dc24e): Kernel trap at 0xffffff801a5e2e49, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffef811ca9bea0, CR3: 0x000000004274c000, CR4: 0x0000000000000660
    RAX: 0x0000000000000100, RBX: 0xffffff802dd897b0, RCX: 0x00000000e7b76fff, RDX: 0x0000000018489000
    RSP: 0xffffff811ca9be00, RBP: 0xffffff811ca9be00, RSI: 0xffffff8115e0d068, RDI: 0xffffef811ca9be80
    R8:  0xffffff8115d9d078, R9:  0xffffff8115e0d068, R10: 0xffffff811ca9bb90, R11: 0x0000000000000246
    R12: 0x0000000000000000, R13: 0xffffff801a7693d1, R14: 0xffffef811ca9be80, R15: 0x0000000000000000
    RFL: 0x0000000000010282, RIP: 0xffffff801a5e2e49, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffef811ca9bea0, Error code: 0x0000000000000000, Fault CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff811ca9ba90 : 0xffffff801a222f79
    0xffffff811ca9bb10 : 0xffffff801a2dc24e
    0xffffff811ca9bce0 : 0xffffff801a2f3746
    0xffffff811ca9bd00 : 0xffffff801a5e2e49
    0xffffff811ca9be00 : 0xffffff801a5f6733
    0xffffff811ca9be60 : 0xffffff801a5f20be
    0xffffff811ca9bf00 : 0xffffff801a5f1ecf
    0xffffff811ca9bf60 : 0xffffff801a640777
    0xffffff811ca9bfb0 : 0xffffff801a2f3c38
    BSD process name corresponding to current thread: dbfseventsd
    Mac OS version:
    13E28
    Kernel version:
    Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
    Kernel slide:     0x000000001a000000
    Kernel text base: 0xffffff801a200000
    System model name: MacBookPro5,5 (Mac-F2268AC8)
    System uptime in nanoseconds: 3901629665348
    last loaded kext at 3718616795316: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f9c773000, size 49152)
    last unloaded kext at 3844885002402: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f9c658000, size 16384)
    loaded kexts:
    com.fortinet.fct.kext.avkern 1.0.1
    com.fortinet.fct.kext.fctwfnke 1.0
    org.virtualbox.kext.VBoxUSB 4.2.12
    org.virtualbox.kext.VBoxDrv 4.2.12
    com.apple.filesystems.smbfs 2.0.2
    com.apple.filesystems.autofs 3.0
    com.apple.driver.AudioAUUC 1.60
    com.apple.driver.AppleHWSensor 1.9.5d0
    com.apple.driver.AGPM 100.14.28
    com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.AppleHDA 2.6.3f4
    com.apple.driver.AppleLPC 1.7.0
    com.apple.driver.AppleBacklight 170.3.5
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.driver.AppleMikeyDriver 2.6.3f4
    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleHWAccess 1
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.GeForceTesla 8.2.4
    com.apple.driver.AppleUpstreamUserClient 3.5.13
    com.apple.driver.AppleMCCSControl 1.2.5
    com.apple.driver.SMCMotionSensor 3.0.4d1
    com.apple.driver.AppleUSBTCButtons 240.2
    com.apple.driver.AppleUSBTCKeyboard 240.2
    com.apple.driver.AppleIRController 325.7
    com.apple.driver.AppleUSBCardReader 3.4.1
    com.apple.iokit.SCSITaskUserClient 3.6.6
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.6.0
    com.apple.driver.AppleUSBHub 683.4.0
    com.apple.driver.AppleFWOHCI 5.0.2
    com.apple.driver.AirPort.Brcm4331 700.20.22
    com.apple.driver.AppleAHCIPort 3.0.5
    com.apple.nvenet 2.0.21
    com.apple.driver.AppleUSBEHCI 660.4.0
    com.apple.driver.AppleUSBOHCI 656.4.1
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleACPIButtons 2.0
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 2.0
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
    com.apple.nke.applicationfirewall 153
    com.apple.security.quarantine 3
    com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
    com.apple.kext.triggers 1.0
    com.apple.AppleGraphicsDeviceControl 3.6.22
    com.apple.iokit.IOSerialFamily 10.0.7
    com.apple.driver.DspFuncLib 2.6.3f4
    com.apple.vecLib.kext 1.0.0
    com.apple.iokit.IOAudioFamily 1.9.7fc2
    com.apple.kext.OSvKernDSPLib 1.14
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.driver.AppleHDAController 2.6.3f4
    com.apple.iokit.IOHDAFamily 2.6.3f4
    com.apple.iokit.IOFireWireIP 2.2.6
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.driver.IOPlatformPluginLegacy 1.0.0
    com.apple.driver.IOPlatformPluginFamily 5.7.1d6
    com.apple.iokit.IOSurface 91.1
    com.apple.iokit.IOBluetoothFamily 4.2.6f1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
    com.apple.driver.AppleSMBusController 1.0.12d1
    com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.driver.AppleSMC 3.1.8
    com.apple.driver.AppleUSBMultitouch 240.9
    com.apple.iokit.IOUSBHIDDriver 660.4.0
    com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
    com.apple.iokit.IOUSBMassStorageClass 3.6.0
    com.apple.driver.AppleUSBMergeNub 650.4.0
    com.apple.driver.AppleUSBComposite 656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOAHCISerialATAPI 2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
    com.apple.iokit.IOUSBUserClient 660.4.2
    com.apple.iokit.IOFireWireFamily 4.5.5
    com.apple.iokit.IO80211Family 640.36
    com.apple.iokit.IOAHCIFamily 2.6.5
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOUSBFamily 683.4.0
    com.apple.driver.NVSMU 2.2.9
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 278.11.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 7
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.DiskImages 371.1
    com.apple.iokit.IOStorageFamily 1.9
    com.apple.iokit.IOReportFamily 23
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 2.0
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.pthread 1
    com.apple.kec.corecrypto 1.0
    Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, SMC 1.47f2
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341344758334D314131333333433920
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341344758334D314131333333433920
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.6f1 14216, 3 services, 23 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: FUJITSU MJA2160BH FFS G1, 160,04 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS23N
    USB Device: Internal Memory Card Reader
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Iomega
    USB Device: Built-in iSight
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: IR Receiver
    Thunderbolt Bus:
    new etre check:
    EtreCheck version: 1.9.12 (48)
    Report generated 26 juli 2014 13:24:10 CEST
    Hardware Information:
      MacBook Pro (13-inch, Mid 2009) (Verified)
      MacBook Pro - model: MacBookPro5,5
      1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
      8 GB RAM
    Video Information:
      NVIDIA GeForce 9400M - VRAM: 256 MB
      Color LCD 1280 x 800
    System Software:
      OS X 10.9.4 (13E28) - Uptime: 0 days 0:3:27
    Disk Information:
      FUJITSU MJA2160BH FFS G1 disk0 : (160,04 GB)
      EFI (disk0s1) <not mounted>: 209,7 MB
      Macintosh HD (disk0s2) / [Startup]: 159,18 GB (26,73 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      HL-DT-ST DVDRW  GS23N 
    USB Information:
      Apple Internal Memory Card Reader
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Iomega Iomega 500,11 GB
      EFI (disk1s1) <not mounted>: 209,7 MB
      IOMEGA (disk1s2) /Volumes/IOMEGA: 499,76 GB (498,79 GB free)
      Apple Inc. Built-in iSight
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Gatekeeper:
      Mac App Store and identified developers
    Kernel Extensions:
      [not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
      [not loaded] com.caiaq.driver.NIUSBGuitarRigMobileDriver (2.4.23) Support
      [not loaded] com.caiaq.driver.NIUSBHardwareDriver (2.4.23) Support
      [loaded] com.fortinet.fct.kext.avkern (1.0.1 - SDK 10.7) Support
      [not loaded] com.fortinet.fct.kext.fctapnke (1 - SDK 10.7) Support
      [loaded] com.fortinet.fct.kext.fctwfnke (1.0 - SDK 10.7) Support
      [not loaded] com.fortinet.kext.fctrouternke (1 - SDK 10.7) Support
      [not loaded] nl.bjaelectronics.driver.PL2303 (1.0.0d1) Support
    Startup Items:
      ChmodBPF: Path: /Library/StartupItems/ChmodBPF
      HWNetMgr: Path: /Library/StartupItems/HWNetMgr
      HWPortDetect: Path: /Library/StartupItems/HWPortDetect
      StartOuc: Path: /Library/StartupItems/StartOuc
      wpa_supplicant_srv: Path: /Library/StartupItems/wpa_supplicant_srv
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.fortinet.forticlient.appfw.plist Support
      [running] com.fortinet.forticlient.epctrl.plist Support
      [running] com.fortinet.forticlient.fmon.plist Support
      [running] com.fortinet.forticlient.servctl.plist Support
      [loaded] com.fortinet.forticlient.vpn.plist Support
      [running] com.fortinet.forticlient.wf.plist Support
      [loaded] org.macosforge.xquartz.privileged_startx.plist Support
    Launch Agents:
      [loaded] org.macosforge.xquartz.startx.plist Support
    User Launch Agents:
      [running] com.spotify.webhelper.plist Support
    User Login Items:
      Dropbox
      Emil
      NIHardwareAgent
      FortiClientAgent
    Internet Plug-ins:
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      CitrixICAClientPlugIn: Version: 11.1.0 Support
      Silverlight: Version: 4.1.10329.0 Support
      iPhotoPhotocast: Version: 7.0
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
      Citrix online plug-in  Support
      Flash Player  Support
      Native Instruments USB Audio  Support
    Time Machine:
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 148.25 GB Disk used: 123.36 GB
      Destinations:
      IOMEGA [Local] (Last used)
      Total size: 0 B
      Total number of backups: (null)
      Size of backup disk: Too small
      Backup size 0 B < (Disk used 123.36 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          4% mds
          4% WindowServer
          3% Mail
          3% backupd
          1% mdworker
    Top Processes by Memory:
      98 MB com.apple.IconServicesAgent
      82 MB Dropbox
      74 MB Mail
      41 MB WindowServer
      41 MB Dock
    Virtual Memory Information:
      5.66 GB Free RAM
      1.17 GB Active RAM
      346 MB Inactive RAM
      603 MB Wired RAM
      318 MB Page-ins
      0 B Page-outs

  • Excel file can't open via email after upgrading to OSX 10.9.2

    After upgrading to OSX 10.9.2, my Excel files are not readable when sent by email. My version for Excel is 2008 for Mac V12.3.6.
    I have no trouble opening Excel on my computer but cannot seem to send Excel files via email.

    Thanks. Tried that and it works but I had found another alternative.
    Didn't realise but my Excel file had the extension missing even though it was saved as xlsx. To solve the problem, I just clicked on 'Append the File Extension' when I 'Saved As' and it worked. Thanks for the alternative help anyway.

  • I cannot view my videos after upgrading to OSX

    I cannot view my videos after upgrading to OSX. Each video I try to open the message on the black background is Blocked Plug-In. In system preferences I have the latest Java but Flash Player does not upgrade to Flash 12 after numerous attempts.

    HI MortenEJ,
    Thanks for your responce.but already done doing "Restore factory settings" .. and when Im doing "back up from" ..
    I still encounter the same problem. I have important messages in my inbox I want to keep. 
    I even try to upgrade to the newest version. IOS 5.0.1. but still the same..My main problem is my contacts. I dont have "+" add contact button and inside each contact.. I dont have the "edit" button..

Maybe you are looking for

  • Custom Miro Popup in MIGO.

    At the time of preparing 105 MIGO of local purchase. We get  field of Custom MIRO in local purchases. In previous same transaction we did not get such field of custom MIRO.How this popup of custom MIRO comes? Edited by: Pritesh kumar on Aug 17, 2010

  • ERRORS IN 3.0 (iTunes ENGLAND)

    There are a couple of errors in iTunes on the iphone 3G, 1.VIDEO-FILMS-GENRES-ALL GENRES (there is a spelling mistake when you open up this All Genres is spelt ALLE. 2.MORE-AUDIOBOOKS (there is a tab at the top right which says FEATURED CATEGORIES,th

  • Flash Will NOT Install - Tech Note 19166 Didn't Work

    All of the sudden my Flash player stopped working in the browser. Use to work fine, then didn't one day. I get the "Failed to install" message referencing me to http://www.adobe.com/go/tn_19166 I've gone through every step at least 5 times with admin

  • Service Consumption of Enterprise Serices

    Hello @ All, I have published a Service definition from a SAP SWCV for SAP IS-U but the problem it has no Endpoint. I have tried to configure one. But i didn´t find its name on Services under SOAMANAGER. Because i think this Service definition don´t

  • Concept Clés en francais pour Canada Francais?

    Est-ce possible d'avoir tout le texte de description des concepts clés en francais, que ce soit pour le Canada-Francais ou n'importe quel autre pays ???ca reste bloqué en anglais - cé tu possible ???ca serait vraiment cool et ca serait la moindre des