After Upgrade to PI7.1 getting Simple transformation error

HI Experts,
I have an Issue, the scenario which i', working its working properly in DEV, QA, PROD in PI 7.0, We upgraded the system to PI7.1
Unknown Simple transformation error in converting XML to internal table
Application error in mapping program , error text: Unknown Simple transformation error in converting XML to internal table An exception has occurred.
Can any one suggest related notes are suggestion.
appericate in advance for the solutions which you all provide me
Thank you
Venkat Anil

What kind of mapping is that ? Graphical, Java, XSLT, ABAP ?
The XML parser in 7.1 contains many subtle changes compared to 3.0
But this error sounds like a bug. Is there something special in the XML input ? is it wellformed-XML ?
CSY

Similar Messages

After upgrading to CF8 getting a JRun error

Hello,
After having installed CF8, we're getting the following JRun
error. Any idea as to what could be causing this?

jenn wrote:
> After having installed CF8, we're getting the following
JRun error. Any idea
> as to what could be causing this?
> java.lang.IncompatibleClassChangeError: Expecting
non-static method
>
coldfusion.runtime.CfJspPage._arraySetAt(Ljava/lang/Object;[Ljava/lang/Object;Lj
> ava/lang/Object;)V
> at
>
cfApplication2ecfm1144146628.runPage(C:\blackstone_updates\cfusion\wwwroot\CFIDE
> \administrator\Application.cfm:106)
Blackstone was CF 6.x. You are running a CF 6 CFIDE against a
CF 8
installation. Find the right CFIDE and try again.
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

Simple transformation error in converting XML to internal table

Hi Team,
I have an issue, its working in Dev, QA, and Prod in PI 7.0, once we upgrade it to PI 7.1 I'm getting the below mention error,
Unknown Simple transformation error in converting XML to internal table
Application error in mapping program ZF_INT006_FILE_TO_SAP_FILE, error code: , error text: Unknown Simple transformation error in converting XML to internal table An exception has occurred.
Can any one suggest related notes are suggestion.
appericate in advance for the solutions which you all provide me
Thank you
Venkat Anil

Check the flag "use SAP XML toolkit" for the operation mapping and try, if that works then.
Check the flag for all XSLT and Java mappings which is migrated from PI 7.0

I can't buy elements 13 upgrade. I get this message "Error in Your order"

I can't buy elements 13 upgrade. I get this message "Error in Your order"

Hi Attila74,
Please chat with our Customer Service to receive the upgrade. http://bit.ly/E12_PAU
Ragards,
Sandeep

I am having an issue burning DVDs on Final Cut Pro X. After 15 minutes, I get a QuickTime Error:0. Anybody have a solution to this?

I am having an issue burning DVDs on Final Cut Pro X. After 15 minutes, I get a QuickTime Error:0. Anybody have a solution to this?

I'm sure the pros will be along to ask what your settings are. Although this may not be exactly helpful, I did find compressor to be much more robust for burning DVDs. This could partially be because it includes a template to convert you movie into correct DVD format. I was quite pleased with the outcome after multiple failed attempts using FCPX alone.

I had an iMac with Snow Leopard 10.6.8, I downloaded and installed Lion, did not make me any questions. After the reboot I get this fatal error: Panic(cpu 0 ......) Kernel trap ......

I had an iMac with Snow Leopard 10.6.8, I downloaded and installed Lion, did not make me any questions. After the reboot I get this fatal error: Panic(cpu 0 ......) Kernel trap ......

Please post the Kernel Panic report. You will find it at /Library/Logs/DiagnosticReports per
http://support.apple.com/kb/ht2546
When we look at the KP report we may find some clues why it is occuring.

After upgrading iTunes, I get the error, missing msvcr80.dll, How do I resolve this issue?

I am using Vista 32 bit on an older dell laptop and have been using iTunes for a long time, downloading songs, syncing with my iPhone, and etc, with no problems. After upgrading to the newest version of iTunes 11, I received an error message of "missing MSVCR80.dll, please reinstall the software" when trying to start the iTunes application. I removed the iTunes software and associated apps from my laptop and reinstalled the iTunes software. While the software was installing it indicated that I did not have permission to install the application. Although I started the installation with the option of "Run as Admistrator". Since I could not reinstall the iTunes software, I choose a restore point where my iTunes was working before, and changed to that point. I am still getting "MSVCR80.dll missing". Does anyone know how I can restore the missing MSVCR80.dll? I have found articles on the web of how to do this, but none seem to work.
Thanks

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

After upgrading, I am getting the dreaded "iTunes has stopped working" message. I've followed all of the troubleshooting tips on the forum without success. Fortunately, it works on my other computers. Running Win7 pro.

After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??

My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi

Upgraded to Lion, getting Java runtime error.

I recently upgraded to Lion. Since then I am getting "Java runtime error" and says I need to downoad java, but that I am not connected to the interned. Clearly I am connected to the internet as I am writing this now. Of course Apple wont let me download java myself from the java website.
So heeeeeelp?
thanks!
Braden

Hi Braden,
you cannot d/l Java from http://support.apple.com/kb/DL1421 ?
Have you tried another browser -- maybe that would work?
Otherwise. the easiest way is of course downloading it on another machine, copying it to a thumb drive and plugging that into your Lion Mac then...
Hope that helps,
Thomas

After upgrade OneNote folders cannot sync, show error code: 0xE402005F

I've found many threads discussing OneNote Sync errors, though none of them so far have addressed this error code or specific behavior related to a Sharepoint upgrade. There also doesn't seem to be a fix discussed for this particular problem.
After upgrading from Sharepoint 2010 to 2013, all upgraded OneNote folders fail to sync with the following error message:
"We're sorry, something went wrong during sync. We'll try again later. (Error code: 0xE402005F)"
Very inspecific error, very little information on how to investigate the problem. And no references to this error code can be found.
After the upgrade our URLs are the same, so the notebook path information should be intact. These were mostly folders created by OneNote 2010. I've used the suggestion to run "onenote.exe /safemode" and reset cache files and settings
to no effect. Right now my only solution is to access the folders from our old farm, export the contents and then import each page into a newly created notebook. But, this is just a workaround and not a solution.
Does anyone have advice on what to try next?
Thanks

Hi Brad,
Find a very similar case internaly, it provides the the following approach, which is similar to what you have done.
SharePoint 2010 is migrated to 2013, the Notebooks references are broken, for each notebook we had to fix the references.
1.Downloaded Notebooks to local machine.
2.Then create a new notebook on local machine.
3.Transfer all sections into new notebook.
4.Copy all references folder and files from SharePoint library to desktop
5.For each section built the reference to the folder
6.Close the notebooks and re-launch the onenote.
Thanks
Daniel Yang
TechNet Community Support

After upgrading jdeveloper version getting following errors

Hi,
I created my application using jdeveloper11.1.1.3 and now i upgraded my jdeveloper version to 11.1.2.1. And while using my application in this I am getting following errors.
1. ArrayIndexOutOfBoundException:
TestCase:
I am having modeldriven dropdown searchfield(Combo) in my search form. while selecting the value from it and clicking search button the following errors occurs. It occurs only for combobox field.
2. ADF: Adding the following JSF error message: Missing IN or OUT parameter at index:: 1 java.sql.SQLException: Missing IN or OUT parameter at index:: 1
TestCase:
In my Timesheet form when entering the data and saving it. this error occurs.
please help.....
Edited by: Rebecca on Nov 30, 2011 10:48 PM

hi user,
ArrayIndexOutOfBoundException: check the code gone under some looping. that is in recursion
Missing IN or OUT parameter at index : usual mistake using some bind param. but not defining that bind param variable.
but your subject of your thread is different from your content of your thread. why?

After recent upgrade I keep getting the HDCP error

This error pops up 5-10 times a day now since the most recent update. If I play the same movies through Netflix on the following there are no errors:
- iMac - fine
- iPad - fine
- iPhone - fine
- Playing through apple tv - constant errors.
Spoke to apple and they were clueless. Kept stating "we are not aware of this error and it's a Netflix issue". Checked all cables/connections and there are no problems with them.
If it was Netflix, then how is it that I can play the same movies on every other device in my home? And why is it happening only after the recent update?

Sometimes CUDA causes problems. Try checking for an update and/or un-installing it. Un-install using the developer’s instructions to make sure you remove all parts of the application.
Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

How to Get a transformation Error from a previous step in cc BPM

Hello gurus!
I have an important situation, in a BPM step I make a SendSync Call, if there is an error, it goes to the exception branch, and then I do a transformation step (to assign some values to an Idoc) and then I send the Idoc to an R3 system to inform the error.
Sometimes, for example in the sync call throws this error: (that can be seen in the abap monitor)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code area="MESSAGE">GENERAL</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.UnknownHostException: safcc.pfc.gov.tt</SAP:AdditionalText><SAP:Stack/><SAP:Retry>M</SAP:Retry></SAP:Error>
My need is to get the error message,and to map it in an idoc field (with an UDF in the transformation exception branch for example), the error is exactly in this part of the result:
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.UnknownHostException: safcc.pfc.gov.tt</SAP:AdditionalText>
Is there any way to achieve this?
Thanks in advance !
Juan.

You wont be able to get the error details....just an indication that an error has occured can be obtained (the exception branch)...no error text can be extracted.
Regards,
Abhishek.

10g stopped working after 11g installed. Getting ORA-12514: error

I had Oracle 10g installed in win2000 sp2. with port 1521.
I have installed Oracle 11g on the same system. with port 1522.
I am able to start both the instances and tnslistener but I am not able to connect to Oracle10g database. Getting following error.
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
I have done the following check.
c:\> tnsping tek10g
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 14-MAR-2
008 13:04:26
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\app\mmurugai\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = PC456)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = tek10g) (SRVR = DE
DICATED)))
OK (50 msec)
2) Checked lsnrctl services
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=PC456.SYNTELORG.COM)(PO
T=1522)))
Services Summary...
Service "orcl11g" has 1 instance(s).
Instance "orcl11g", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0 state:ready
LOCAL SERVER
Service "orcl11gXDB" has 1 instance(s).
Instance "orcl11g", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: PC456, pid: 284>
(ADDRESS=(PROTOCOL=tcp)(HOST=PC456.SYNTELORG.COM)(PORT=2963))
Service "orcl11g_XPT" has 1 instance(s).
Instance "orcl11g", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0 state:ready
LOCAL SERVER
The command completed successfully
LSNRCTL>
I am not able to see my tek10g 10g database details.
I also checked my tnsnames.ora file which has the entries properly.
Sqlnet.ora file has
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
How to solve this issue? Is that possible to run oracle 10g and oracle 11g in same host?
Thanks in Advance...
regards,
Manikandan

The approach I would take, in general is:
1) pick a listener, and only one. Get that working.
2) Make sure all the databases register to that listener
3) Fix the TNSNAMES.ORA files appropriately.
To fix the listener
1) Verify the listener address matches the current environment
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oracle\app\oracle\product\10.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oracle\app\oracle\product\10.2.0\server)     << - MUST point to correct HOME
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
      (ADDRESS = (PROTOCOL = TCP)(HOST = myHOST)(PORT = myPORT))
)where
myHOST is this host's resolvable name or IP address
myPORT is the port (default 1521) that the listener should monitor
The HOST is often a problem if the machine uses DHCP.
2) Register the databases
On startup, database will auto-register to the listener defined in the init parameter 'LOCAL_LISTENER', which defaults to 'HOST={current_host}, PORT=1521'
After startup, if the listener is taken down, you can register each database manually using the DBA command
ALTER SYSTEM REGISTER;
Either way, it should show up in the output of 'lsnrctl status'
While you are accessing the database, you might want to find out which services the database supports. That can be done in SQLPlus using the command
SHOW PARAMETER SERVICE_NAMES
Note that the database name is the default service name.
3) Fix [all] the TNSNAMES.ORA file[s].
Each SERVICE_NAME from the previous list that you want to access from this client, yu should find an entry that looks like
myTEST =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = myHOST)(PORT = myPORT))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = mySERVICE)
myTEST is the alias I want to look up by using it as the connect target string.
myHOST should match the HOST= entry in the LISTENER.ORA
myPORT MUST match the PORT= entry in the LISTENER.ORA
mySERVICE is the Service to which I am asking the listener to connect me, as found in the lsnrctl status output

After upgrade Server 3.1.1 : ical:error = "CANNOT_LOAD_BUNDLE_ERR"

All services were working fine until last night upgrade to Server version 3.1.1
Calendar and AddressBook now broken
Any idea how to fix ?
The details are as follows :
serveradmin status ical
ical:error = "CANNOT_LOAD_BUNDLE_ERR"
serveradmin status addressbook
addressbook:state = "STOPPED"
addressbook:setStateVersion = 1
addressbook:readWriteSettingsVersion = 1
I do not know where the addressbook.log is but in
the ical log : /var/log/ical/caldavd/servermgr_calendar.log
I find
[cal] 30/03/14 11:27:56 GMT+2 : Asking calendarserver_config for a readConfig
[cal] 30/03/14 11:27:57 GMT+2 : Returned from calendarserver_config
[cal] 30/03/14 11:27:57 GMT+2 : Error while parsing calendarserver_config output
Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Unexpected character I at line 1) UserInfo=0x7fd6f9816720 {NSDebugDescription=Unexpected character I at line 1, kCFPropertyListOldStyleParsingError=The data couldn’t be read because it isn’t in the correct format.}
[cal] 30/03/14 11:27:57 GMT+2 : Could not get settings from calendarserver_config
[cal] 30/03/14 11:27:57 GMT+2 : Read settings returning:
[cal] 30/03/14 11:27:57 GMT+2 :   configuration = {
[cal] 30/03/14 11:27:57 GMT+2 :   }
[cal] 30/03/14 11:27:57 GMT+2 :   readStatus = 0
[cal] 30/03/14 11:27:57 GMT+2 : getState returning: {
    calendarState = STOPPED;
    contactsState = STOPPED;
    readWriteSettingsVersion = 1;
    setStateVersion = 1;
    state = STOPPED;
[cal] 30/03/14 11:27:57 GMT+2 : setState returning: {
    calendarState = STOPPED;
    contactsState = STOPPED;
    readWriteSettingsVersion = 1;
    setStateVersion = 1;
    state = STOPPED;
[cal] 30/03/14 11:27:57 GMT+2 : Command setState duration 67.91 seconds
[cal] 30/03/14 11:27:57 GMT+2 : setState releasing request lock
[ab] 30/03/14 11:27:57 GMT+2 : setState returning: {
    readWriteSettingsVersion = 1;
    setStateVersion = 1;
    state = STOPPED;
[ab] 30/03/14 11:34:17 GMT+2 : Read Settings
[cal] 30/03/14 11:34:17 GMT+2 : Command readSettings received
[cal] 30/03/14 11:34:17 GMT+2 : readSettings attempting to acquire request lock...
[cal] 30/03/14 11:34:17 GMT+2 : readSettings acquired request lock
[cal] 30/03/14 11:34:17 GMT+2 : Read Settings
[cal] 30/03/14 11:34:17 GMT+2 : calendarServerOperationWithRequest
[cal] 30/03/14 11:34:17 GMT+2 : Calling agent...
[cal] 30/03/14 11:34:33 GMT+2 : Agent failure: The request timed out.
[cal] 30/03/14 11:34:33 GMT+2 : Agent returned...
    error = "The request timed out.";
[cal] 30/03/14 11:34:33 GMT+2 : Asking calendarserver_config for a readConfig
[cal] 30/03/14 11:34:34 GMT+2 : Returned from calendarserver_config
[cal] 30/03/14 11:34:34 GMT+2 : Error while parsing calendarserver_config output
Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Unexpected character I at line 1) UserInfo=0x7fc4c8c4f4d0 {NSDebugDescription=Unexpected character I at line 1, kCFPropertyListOldStyleParsingError=The data couldn’t be read because it isn’t in the correct format.}
[cal] 30/03/14 11:34:34 GMT+2 : Could not get settings from calendarserver_config
[cal] 30/03/14 11:34:34 GMT+2 : Read settings returning:
[cal] 30/03/14 11:34:34 GMT+2 :   configuration = {
[cal] 30/03/14 11:34:34 GMT+2 :   }
[cal] 30/03/14 11:34:34 GMT+2 :   readStatus = 0
[cal] 30/03/14 11:34:34 GMT+2 : Command readSettings duration 16.62 seconds
[cal] 30/03/14 11:34:34 GMT+2 : readSettings releasing request lock
[ab] 30/03/14 11:34:34 GMT+2 : readSettings returning: {
    configuration =     {
    readStatus = 0;
[ab] 30/03/14 11:34:59 GMT+2 : getState begin
[cal] 30/03/14 11:34:59 GMT+2 : Command getState received
[cal] 30/03/14 11:34:59 GMT+2 : getState attempting to acquire request lock...
[cal] 30/03/14 11:34:59 GMT+2 : getState acquired request lock
[cal] 30/03/14 11:34:59 GMT+2 : getState begin
[cal] 30/03/14 11:34:59 GMT+2 : Read Settings
[cal] 30/03/14 11:34:59 GMT+2 : calendarServerOperationWithRequest
[cal] 30/03/14 11:34:59 GMT+2 : Calling agent...
[cal] 30/03/14 11:35:15 GMT+2 : Agent failure: The request timed out.
[cal] 30/03/14 11:35:15 GMT+2 : Agent returned...
    error = "The request timed out.";
[cal] 30/03/14 11:35:15 GMT+2 : Asking calendarserver_config for a readConfig
[cal] 30/03/14 11:35:15 GMT+2 : Returned from calendarserver_config
[cal] 30/03/14 11:35:15 GMT+2 : Error while parsing calendarserver_config output
Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Unexpected character I at line 1) UserInfo=0x7fb901c65a50 {NSDebugDescription=Unexpected character I at line 1, kCFPropertyListOldStyleParsingError=The data couldn’t be read because it isn’t in the correct format.}
[cal] 30/03/14 11:35:15 GMT+2 : Could not get settings from calendarserver_config
[cal] 30/03/14 11:35:15 GMT+2 : Read settings returning:
[cal] 30/03/14 11:35:15 GMT+2 :   configuration = {
[cal] 30/03/14 11:35:15 GMT+2 :   }
[cal] 30/03/14 11:35:15 GMT+2 :   readStatus = 0
[cal] 30/03/14 11:35:15 GMT+2 : getState returning: {
    calendarState = STOPPED;
    contactsState = STOPPED;
    readWriteSettingsVersion = 1;
    setStateVersion = 1;
    state = STOPPED;
Thanks for suggestions or fixes
p.

Replying to myself:
There was probably some mismatch between old and new stuff. Actually ical appeared in servives list but it does not exists anymore and is called calendar.
So "CANNOT_LOAD_BUNDLE_ERR" makes sense as it just does not exists.
Now settings:calendar -> empty
Attempts to fix that have failed for now.
Any comments ?

After Upgrade to PI7.1 getting Simple transformation error

Similar Messages

Maybe you are looking for