After upgrade to Yosemity my FCPX app will not work. Cant figure out how to upgrade it for Yosemity.
After upgrading my Mac Pro laptop to Yosemity I cannot open FCPX. Messages says upgrade under Apple software upgrades but computer says no upgrades are avaiable.
There is no "Software Update" option with OS X Yosemite. It has been changed to "App Store," and updates are in the App Store.
It sounds like there's something odd with your install of FCP X. You can always remove it and reinstall it; you shouldn't lose any of your projects or media (though I'd recommend you have a backup). The easiest way to remove it is to activate LaunchPad and then find FCP X and click and hold on the icon. Once it starts to jiggle, just click the "X" in the upper left corner to remove it, like you would on iOS. Once it's uninstalled, try installing again from the App Store.
Similar Messages
-
My children deleted my app store on my iphone 4 and now I cant get it back on my phone. any suggestions?
As the App Store is pre-installed on the device, it can't really be removed. I'm thinking the icon is either stashed on another folder, or it's been turned off. If it's in a folder the only way to really find it is to look through all folders on your device for the icon. To check if it's turned off, go to Settings > General > Restrictions (it will ask for a passcode, if your children went into restrictions they created this passcode if it didn't already exist) and make sure "Installing Apps" didn't get turned off (if it's turned off the icon disappears from the Home screens).
Hope this is helpful
-CG -
2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store? Is there a way to find out if the App will work before you download?
Look to the app developer to provide that information when browsing the iTunes Store.
The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
If you aren't happy then sell it and buy a new one. -
I upgraded to Mountain Lion yesterday, but since doing so I find that my 1Password app will not work. I have checked for 1Password updates but there are none. Is there a compatibility issue
Hmmm...I'm using 1Password Version 3.8.20 (build 31499) with a fresh install (scrape and pave) of Mt. Lion on my iMac and it's working fine.
I use Dropbox to sync 1Password so for my fresh install I simply downloaded 1Password from Agilbits website and installed it.
Have you tried reinstalling 1Password? Depending on how you purchased it, download it from their website or from the Mac App store to reinstall/replace it. (IIRC v3.8.x comes directly from Agilbits and v3.9 from the Mac App store.) You shouldn't have to uninstall it, the new download should overwrite the existing copy.
As with anything else, be sure to run a backup first!
More here:
http://support.agilebits.com/discussions/1password-38-for-mac-from-agilebits-web site/17861-finding-existing-data-file-when-reinstalling-1password
http://support.agilebits.com/discussions/1password-in-mac-app-store/3377-how-to- reinstall
http://support.agilebits.com/discussions/1password-38-for-mac-from-agilebits-web site/13769-reinstall
http://support.agilebits.com/discussions/1password-in-mac-app-store/2394-reinsta lling-1-password
Hope that helps.
D'oh! Mende1 beat me to it! -
TS1702 Certain apps will not work after ios6 install.
Certain apps will not work after ios6 update. Tiger Woods golf will run for about 5 seconds and stop. Have uninstalled/re-installed to no avail.
My husband had the same problem with some apps after I updated his iPad 2 to iOS 5. I checked the app store and there were updates for the apps to support the new software. After updating, all apps work just fine.
-
Soundtrack Pro, with Logic Studio. app will not work, while Garage Band is present on my iMac?
Still new to Logic Pro. Got the Soundtrack Pro when i bought the Logic Studio. am i to understand that this app will not work, while Garage Band is present on my iMac?
if this is true, i'd welcome any suggestions. do i have to delete GarageBand on current machine which has Logic Pro?
appreciate any help
thanks,My MacPro w/ OSX 10.6.8 runs GarageBand, SoundtrackPro and Logic 9 (Express) without issues.
Everything was installed fresh - ie no overwrite OS upgrades and no app version overwrite upgrades.
Just so we are clear - an UPGRADE would be from OSX 5 to 6 or from Logic 8 to 9 and involves a purchase. UPDATES are those decimal increments - 10.6.7 to 10.6.8 or Logic 9.1.3 to 9.1.6 that are free.
Sometimes the sequence of installs can make a difference.
Good luck,
x -
Please help me. My YouTube app will not work. Every time I open it says 'cannot connect to youtube'. I have searched for help and tried resetting my settings and rebooting my ipad2 but nothing has solved the issue.
Yes, I am connected to the Internet through my wifi. Everything is working fine with the e eption of youtube. I have reset all Internet settings and have tried synching to iTunes followed by rebooting. This is all the advice I have found although none of it has been helpful.
Has anyone else encountered this problem? -
Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.
The 8 pin Lightning connector can only output 720p and lacks all iPod Out functionality unlike the full iPod Out functionality and 1080p that the 30 pin connector has and I suspect that they are coding iOS 7 specifically for the new devices which have severely reduced abilities and perhaps skipping adding the code needed for 30 pin devices to use their functionality with HDMI, etc.
-
Radio app will not work on nano
Radio app will not work on nano.
Check and see if there is something in the headphone jack causing an obstruction. If yes, clean it out. If no, take it in for service.
-
Epson Workforce 325 scanner app will not work.
Recently downloaded Maverick X and now my Epson Workforce 325 scanner app will not work. I have checked for updates through Epson and they say its an Apple problem, but there is none available through Apple.
Do I have to go back to the old Mountain Lion 10.8.5 v software?You will have no alternative but to wait for Epson to update their drivers to be compatible w/Mavarick. Why not call them (tech support) or send them an email?
-
i need to upgrade my iphoto on my intel based imac. running 10.5.8. can't seem to figure out how to upgrade this iphoto. i also have a new macbook on which this version of iphoto won't open. the macbook is running 10.6.7. what can i do to run iphoto on both machines??
iLife 11 and iPhoto 9 require OS X10.6.3 as a minimum. So you will need to upgrade your iMac to Leopard or Snow Leopard and then purchase iPhoto 11 from the App Store. If you can find a copy of iLife 11 somewhere you'll get all of the latest iApps.
You're new MBP should be running iPhoto 11 and the other iLIfe 11 apps.
OT -
I just downloaded the latest itunes and i cant figure out how to update my iphone apps on my computer now. I go to the toolbar on the top and press search for updates and it tells me that the latest version of itunes is already downloaded or that there are no updates available at this time. Previously, i would be able to go to the apps page on itunes and then press search for updates and then download all. Then I would sync with my phone and both phone and computer would be updated. Now I can only update on the phone and I know Im going to encounter where it tells me the info for downloading is too large to do it on your phone, hence my first question.....where do I go to update my apps on my computer????
While you're in itunes, with the leftside window open, click on Apps. Then, look across the top middle of your itunes screen. You will see several choices: All, Iphone/iPad Touch, Ipad, Ipod Games, List, and Updates.
Clicking on each of these gives you a different view.
When you select ALL you will see all of your apps. When you select Updates you sill see only the apps that need to be updated. When you are in Updates you will see the Update button in the lower right corner.
Hope this helps. -
I have an old version on my iPad 4.3.3 and can't figure out how to upgrade. Per the manual "Software Upgrades" is not an option from the General Settings.
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
I am using an iphone4. Suddenly one day my factime app does not work anymore!! How do I get it to work again, Could someone please me?
Try a reset or restart of the device. If it still does not appear on any of the home screens and cannot be found in a spotlight search, restore the device.
-
did not download the in-app purchase at time of original App download, now I cannot figure out how to find and download the in-app purchase. Please help!
Hello paddyliverpool,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Refund is an option.
Best of luck,
Mario
Maybe you are looking for
-
Iphone 5 excessive cellular data usage
I am a new iPhone user and I am a bit concerned for how fast my phone burns through data. I have an iPhone 5, ios 7.0.4, and my cellphone provider is Fido in Canada (May be irrelevant info). I manually turn cellular data off whenever it's not in use.
-
How do I connect my NI USB-6259 properly to SCXI?
I have a NI USB-6259 DAQ Module a SCXI-1001 Chassis 3 SCXI-1143 8 Channel Low Pass Filter Modules and a SCXI-1180 Front End Plate I use a SH68-68-EPM Cable for Connecting the USB-6259(Connector 0) to a SCXI-1349. Is it wise to use another Cable to co
-
Nonalphanumeric characters in file names
My company's help files have been plagued with the RoboEngine getting clogged with bad SALSailSearch processes. When these processes hit, the server's CPU hits 100%, and the Search feature is crippled. This is the version of RoboEngine that came with
-
Chat keeps showing me offline when i talk in facebook to people and i am still online and logged in
i chat to people in facebook and i appear offline then when they answer they get the message that i am offline and need to send it as a message ie hello (send as a message) your chat message wasn't sent because madmax was offline . i am logged in all
-
Macbook pro 15 retina graphic card problems
I have a problem that my mac dont wanna run the Geforce gt 650M graphic card.. its saying that is running the geforce but you can tell by the proformance that its using the intel HD graphic 4000.. is it software or hardware problems ? i try running