After upgrade videos restart ATV!! Help!

I accepted the software update from my Apple TV this morning. However, I am now having problems, and it has restarted several times already. Here's what is happening:
My ATV is connected to my receiver via HDMI, to another input on my receiver via Optical cable and yet to another input of the same receiver via RCA composite cables. This setup is necessary to I can listen in multiple zones in my house.
The issue is that if I have the receiver setup to the optical input so I can only listen to the ATV music, the moment a video comes on in the shuffle, the sound breaks and then it stops and the ATV restarts itself without any explanation. If I am actually watching the ATV (receiver set to its HDMI input), then there's no problem with videos. In other words, unless the receiver is setup to the HDMI input that the ATV is connected to, the moment a video comes on, it restarts itself.
I've had this exact setup for a long time without problems. Does anybody know what changed that would be causing this? Please help! Thanks!

Do you have the opportunity to use component cables to diagnose whether this is due to the HDMI connection. I know this isn't how you want it set up but it would help with diagnostics.
Alternatively can you play your playlist complete with music videos and disconnect your HDMI cable to see if you have the same issue when a music video comes on.

Similar Messages

  • I can't activate my iMessage and FaceTime after upgrading to ios7? Help please!

    I can't activate my iMessage and FaceTime after upgrading to ios7? Help please! TIA

    Try this support document http://support.apple.com/kb/TS4268 for problems with activating iMessage and Facetime.

  • I lost some of my contacts after upgraded to ios6, please help!

    I lost some of my contacts in my iPhone 4S after upgraded to IOS6, please help!

    Backup is your best option if you have one. Reverting software will not bring the contacts back.

  • My macbook pro run slowed after upgrade to Yosemite, please help!

    Why my mac slowed after I upgrade to Yosemite, Please help!

    You might want to update your profile. Helps people trying to help you.
    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy
    Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • After upgrading Video iPod 60 to 1.1 rating a song hangs the ipod

    This is really wierd. i upgraded my ipod to version 1.1 now whenever I rate a song, the screen locks up.
    The current song continues playing but the elapsed time doesnt change and none of the buttons work, all I can do is reset the ipod. If i don't rate any songs it works fine.
    Anyone else had this problem?
    thanks

    My two cents worth, after upgrading to 1.1 today (device owner for 2 days now) I ran into this problem about 2 hours later. Accidentally turned up the volume full blast when using it because I didn't realise that when it locks up when you use the clickwheel it actually changes the volume and not the rating!
    I've also had :
    1 ) Video forward/reverse looks like its not using I-Frame information for preview so the screen is garbled during fastforward or fastrewind. (Not problem with fw 1.0) - This is however on video created with Jodix creator.
    2 ) Crashes and reboots when fastforwarding and fastrewinding video (again video created with Jodix)
    3 ) One random occurance of it rebooting when scrolling through menus.
    Apple for legal reasons they should let users know that the upgrade is not reversable. I don't recall being told by the upgrader that it cannot go back (I could be wrong).
    Perhaps they could also add a list of 'whats new' like how the menu button when pressed and held goes back to the menu rather than turn off the lcd, and add 'undocumented feature - will cause lockups'.
    i815-733->800 i875-3.2Ghz   Windows 2000  

  • Mail application will not open after upgrading to Yosemite. HELP !!

    After upgrading to Yosemite, my mail will not open...
    I get the following message;
    The last time you opened Mail, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again?
    Options are Don't Reopen or Reopen....

    Hi Clickchris,
    CS5 Photoshop is supported on Mac OS 10.5.7 and 10.6.
    It has not been tested on Yosemite as it is a very old version of the product.
    Please refer to below document.
    http://helpx.adobe.com/photoshop/system-requirements.html#main_Photoshop_CS5_system_requir ements
    Thank you for posting on Adobe Forums.

  • After upgrading, videos randomly stop and restart.

    Since upgrading to iTunes 10 purchased videos of TV shows randomly stop and restart. I've had these videos for years and never had a problem, but now every time I watch an episode it sill get around 5 minutes in and spontaneously start the episode over. Anyone else having these problems?

    Hi Fabrizio,
    why do you want to reboot your server every sunday?????
    If you reboot your SAP this often, you'll have performance problems every Monday. All
    of your SAP internal Buffers must be filled again after an reboot. If your DB is on the
    same Host, also your DB Buffer is empty.
    If this is an productive System, i highly recommend you that you not reboot your SAP System this often....
    (By side, thats the difference between an *nix and an Windows System.).
    What is the reason for doing that?
    confused
    Regards Manuel

  • Can't restart after upgrading video card to a Radeon 9200

    Hi All, I just purchased a Radeon 9200 AGP graphics card for my Quicksilver. I removed the old card which worked fine and installed the new card. As soon as I pushed the new card into the AGP slot the computer turned on and it started to start up. Then a rather load beep sound came through the speakers and the light on the front of the computer started to flash. I tried this a couple of times but it still will not start with the new card installed. Everything works fine with the original card.
    Anybody have any suggestions?

    Hi,
    Welcome to the Apple Discussion Forum!
    Did you purchase a regular PC version ATI 9200 video card that was 'flashed' for Mac use? Or, is it just a PC version ATI 9200.
    Either way, a regular PC version won't work in a Mac, even though it fit's the AGP slot. If it's a 'flashed' card from an Ebay Seller it sounds faulty, get a refund.
    ATI only offered a Mac Edition 9200 as a PCI card, not AGP. There was an ATI 9000 Mac Edition in AGP.
    Regards,
    Dave

  • ITunes not syncing apps after upgrading to ios 5 - Help :(

    I downloaded the firmware for ios 5 as it took 60 mins to download last night, and when it got to 10 mins, it errored. I backed up everything, and it gave me the option to restore backup once i had installed the new ios firmware.
    However, all it gave me was my contacts and photos. In my itunes library, i have all my apps there, but i am unable, after 2 hours, to find a way to get the apps in my itunes to go on my ipod. I tried nearly everything:
    Unticked manually manage music and videos
    Restored old back up
    Googled for over an hour
    Authorised my account
    Restarted computer several times
    Uninstalled/reinstalled iTunes a few times
    Pressed "sync" over 50 times
    All my apps are in my library and i have found all the .ipa files on my file browser. The problem isn't redownloading all my apps again, its all the saved levels, settings etc on my games/apps. Here is a pic of my itunes if it helps... http://i51.tinypic.com/34gq1b4.png
    Many thanks in advance,
    Yoni

    I'm having the same problem ! Each time the sync starts it suddenly stops and says finished syncing

  • Iphone 5 has started powering down after upgrade to 7.02, help please.

    My iPhone 5 started powering down after the 7.02 upgrade I did almost a week ago (3 times).  I realize now that it starts after I see a message notification on the home screen and click on the slider to enter my passcode and reply to the message.
    I never get the chance to enter my passcode and the phone turns itself off. The only way I can bring it back is to connect it to my Mac and launch iTunes.  Then it reboots itself and behaves normally for 2 days.
    Any ideas are appreciated.
    Thanks.

    Hi AimanBms,
    If you are having issues with your iPhone restarting unexpectedly, you may find the following article helpful:
    iOS: Device unexpectedly restarts, displays Apple logo, or powers off
    http://support.apple.com/kb/TS5356
    Regards,
    - Brenden

  • After upgrade, video's (with flash 10 10,2,159,1) jumps up and down

    Most videos jumps up and down when watching after I upgraded to firefox 4.
    I have

    Try to disable the hardware acceleration in the Flash Player.
    See [[Cannot view full screen Flash videos]]
    * http://www.youtube.com/swf_test.html (right-click the player: Settings)
    Flash "Display settings" window:
    * http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

  • I can't access Windows 7 through Bootcamp anymore after upgrading to Lion, please help

    Hi All.
    I just recently upgraded my operarting system to the new OS X Lion. I had Windows 7 running through Bootcamp. Now every time i try and start windows like I used to, the computer restarts but then i get a black screen with text on the top left saying something like "no system disk". What i'm saying is that i cannot get into windows anymore since I upgraded. Anyhelp will be highly appreciated please

    It shows only two options and it recognise my ext dvd-rw then i partition for boot camp partition but after the partition that restarts automatically then blank screen displayed infinitely give me solution

  • MBP extremely slow after upgrading to Lion. Help please.

    Hello,
    I'm using a MacBook Pro and just loved it while it was still on Snow Leopard. I upgraded to Lion a month ago and thought the reason for my MBP delay in EVERYTHING was because it was still indexing all the files or getting used to the new OS. However, after a month, when I turn my computer on it takes 5-9 minutes with the loading page of Apple.
    It takes another 5-8 minutes for it to normally function after logging in but it isn't consistent though. I really need help over here guys.
    My line of work requires a fast notebook and quite honestly, I'm very disappointed with the new os.
    Thank you in advance,
    Yano

    If it is a new installation, spotlight can take forever to do the first indexing. I put my Sleep option in Power preferences to "never" (On mains power that is) and leave the computer lid open / on all night.
    There are also other things going on, like, software updates,(both from Apple and third party), maintenance scripts (that run on schedule at night), Backup, iDisk and iCloud syncs (the first uploads can be large), etc.
    Once the initial cludge is cleared things get much better. But get that RAM upgrade. Crucial delivered mine within 24 hours of ordering 
    You'll need a very small screwdriver!

  • No sound after upgrading video card on Pavilion Slimline?

    Note: Solution follows this post.
    I submit this due to the fact that I could not find a suitable resolution for this problem in these forums.  Hopefully someone else can receive some benefit from it.
    I just upgraded my video card in my Pavilion Slimline to an PCI-E ATI 4650.  After the upgrade I get no sound whatsoever from the Realtek HD sound (onboard).  In checking the property sheet of the soundcard, I can see that the Realtek device is set to use HDMI output.  This is fine except for the fact that HDMI is not being used.  I am using the Analog plug on the rear of the soundcard.
    Windows 7 x86
    4G Ram
    ASUS TV Tuner
    ATI 4650 PCI-E Video

    The resolution that worked for me is as follows:
    1.) Open device manager and disable any other installed audio devices.  (For me this was the ATI HDMI audio device that is installed with the ATI Video Card and also the Audio device used by the ASUS TV Tuner I have)
    2.) With only the Realtek Audio device enabled, reboot.  Be ready to press F10 to get into your BIOS setup options.
    3.) Within your BIOS find the settings for your onboard Audio device.  Change that setting from "Auto" to "Enabled".  Save your changes and reboot.  (This step may or may not be necessary but is included here as a precautionary measure just in case.)
    Upon reboot your sound should be working properly. (Mine was) 
    4.) Now go back into Device Manager/Audio properties and "Enable" the devices you disabled earlier.  Check to make sure sound is still working afterwards.  If all is still working, reboot and check it again just to be sure.  

  • N95 hang after upgraded to v30, please help

    Hi,
           I upgraded my N95 using Nokia Software Updater to v30, NSU shown updated completed. After power down the phone and powe up again, the N95 unable to power up and show the "NOKIA" logo only.
          I removed the baterry and power up again, it only showing the "NOKIA" logo only, pleae help.
    Thanks,

    Try booting it without the memory and sim card in.
    If that fails to work try the hard reset which will revert it to a fresh out of the box state with all data wiped.
    Hard reset:
    1. Switch off the phone.
    2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
    3. While holding these buttons, hold the power button for a second to switch on the phone.
    4. Release when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
    It may take a few attempts and very flexible fingers.
    If that still fails then your only option is the nokia care point.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

Maybe you are looking for