After upgrades iMac will not completely restart.. lost please help

Hi, I am new to the forum but I have been scouring the net for an answer to my problem. I have found some similar problems but nothing exact so I decided to post to make a deadline. Please help.
Yesterday night I got one of those apple software updates. I cant remember what it was for but it was fot 3 different things nothing out of the ordinary. Once they were installed I had to restart my computer. I did this and when I did my computer booted up and froze at the blue screen after the white/grey apple screen and will go no further.
Heres where it gets a little different from other posts I have found. I have a wireless keyboard and mouse so I cannot run the start up disks or get to safe mode. I bought a different usb mouse and keyboard today and am now able to put disks in and out of the disk drive by holding down the left button during start up. The only problem the keyboard came with software that needs to be installed to make it work. So it is still impossible to connect to a keyboard. So I still cant hold shift, control or c to get to safe mode or run my mac disks.
Im not sure where to go from hear. I have a seagate external harddrive backing everything up so hopefully I didnt lose everything. Any help would be great I am lost.
Thanks for your time

When you get the new keyboard, start up from Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Reboot, then repair permissions from your hard drive.

Similar Messages

  • HT204416 My safari will not upload any website please help.

    My safari will not upload any website please help.

    You may have more than one issue, but the most important one is that your internal hard drive is failing, or there is some other hardware fault.
    Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • HT3743 my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

    my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

    If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808

  • HT2128 I am trying to download Java onto my Mac, but it will not allow me. Please help.

    I am trying to download Java onto my Mac, but it will not allow me. Please help.

    From where? What happens when you try?
    Java (2)
    Java 6 Enable
    Java SE 6 Update 20013-004

  • My I phone 3gs will NOT turn on or charge.... I've tried different charges and it will not notice in itunes please help me apple

    My I phone 3gs will NOT turn on or charge.... I've tried different charges and it will not notice in itunes please help me apple

    We here are not representatives or employees of Apple. Looks like your iPhone needs to visit an Apple store for a consultation. Make an appointment.

  • HT1711 How do I get a album that I purchased already to show the whole album. After the lastest upgrade it only shows one song from the album. I tried repurchasing it but it says that is already purchase but will not re download. Please help.

    How do I get an album from Itunes that I have already downloaded to show the complete album again. After the last update it only shows one song. I tried to re purchase the whole album but it will not let me cause I already purchased it. Pease help

    The large text size makes your post almost impossible to read.
    Excessive use of bold or capitals (also) makes posts difficult to read.
    You can drag most of the column headings left or right, or right-click on the header to turn columns on or off.
    Once you've used File > Display Duplicates or Shift > File > Display Exact Duplicates you can use File > Display All or the Display All button at the bottom of the list to restore the display.
    For general advice on organising your library see this article on Grouping tracks into albums.
    tt2

  • Imac will not complete reboot

    imac will come on but not complete reboot process (gray Apple and spinning wheel.  can anyone help?

    Hello,
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214
    Any clues?

  • After upgrade iPhoto will not email using Gmail.  Message " Your email did not go through because the server did not reply."

    After upgrading on both computers at work and at home, iPhoto will no longer email using Gmail (or for that matter any email program I can find).  I've tried the fixes of deleting all accounts in iPhoto and re-entering.   Still doesn't work.  Any other ideas?

    Hi Scooter,
    I'm reposting my response to a similar question here.
    Try this, assuming you're using iPhoto 11 and Mountain Lion:
    Within the iPhoto application, click on iPhoto in the menu bar
    Click on Preferences
    Within Preferences, click on Accounts
    Your Gmail account should be present. Click on Gmail under Accounts.
    Put in the proper information. Your full gmail address is your username (put this under Email address). Outgoing Mail Server is smtp.gmail.com   Port is 465   Password is your password.    Use Secure Sockets Layer (SSL) should be checked.
    Upon making these changes, click on the red "close" button in the top left corner of the pop-up window. Choose to Save Changes.
    Close iPhoto.
    Reopen iPhoto. You should now be able to share photos.
    I hope this helps. One suggestion for you, by the way. It's always best to include the application version and the operating system version you're using when asking for help. The above solution will not apply, at least exactly, to anything other than iPhoto 11 and Mountain Lion.
    Cheers,
    Jeff

  • Imac will not boot up... help.

    imac powers on.  You come to the gray screen with the apple & the circle below it just keeps spooling around.  imac at that point not making much of a sound.  I have powered on & off a bunch of times.  Just stuck & not booting up.  Any suggestions other than bringing it to the store for tech?

    If you have Lion installed:
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
    If you have Snow Leopard installed:
    Reinstall Snow Leopard without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • TS1363 I downloaded ios6 but have lost all my music, i have connected my ipod to my pc but it will not sync can anyone please help me.

    Hi all can anyone help a man who knows very little about computers but is desperate for some help, i down loaded the new ios6 and lost all my data incuding my music, i just need to sync from my pc but it will not sync at all can anyone tell me what to do.

    I have the same problem, since the update two days ago, appears when you always unlock the Apple logo and a loading bar (see file below). Have been three times all over itunes set to the factory settings and reload. Still the same. Now also in use, always on the screen with the Apple logo. Please help me, what's up?

  • I downloaded the new iphoto and the upgrade and now iphoto will not open correctly anymore. please help

    I downloaded the new iphoto and the upgrade and now iphoto will not open correctly anymore. it stays on the opening screen and the message
    shows up that I must update the mediathek. If I click on update the program shuts down. How can I fix this?

    I downloaded the new iphoto and the upgrade
    Does that mean, you are running iPhoto 9.6 on MacOS X 10.10.1 Yosemite? Or are you using an older MacOS X? "New" iPhoto is relative and depends on your system.
    If I click on update the program shuts down. How can I fix this?
    Does "shut down" mean it crashes?  Then post please the error log from the error panel here - copy and paste the report into your next answer (the first 50 lines should suffice)
    Where is your iPhoto Library (Mediathek) stored? Have you moved it to an external drive, or is it still in your Pictures folder (the order "Bilder")?

  • I've downloaded Logic and after I opened it once, it will not open again. Please help

    I've downloaded Logic Pro and once it opened the first time, it hasn't opened since. Please help.

    Hi roderick93!
    Here is an article that will help you troubleshoot this issue:
    Logic Pro X: Troubleshooting basics
    http://support.apple.com/kb/HT5859
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Macbook Will Not Boot Up Correctly - PLEASE HELP

    Hello,
    So my MacBook Pro 17" boots up to the login screen where I have two names. One of the login names works fine, but the other will not let me sign in. After I put my password, the desktop background for that name comes up then it freezes and just has the spinning mouse rainbow. I really need to get back in that name as it has all of my programs and projects. How do I fix this?
    Thanks, Joe

    well, it boot up fine now. i ran one boot in safe mode, then restarted and now it boots up fine. i don't really know how safe mode works, but it seemed that one boot fixed the problem!

  • Premiere pro cc 2014 just abruptly shut down and now will not open my project please help...

    I am trying to open a project file that just abruptly shut down - "serious error occurred" and now my project will not open at all.  I have no idea what to do other than start over completely!!  Multi cam mix with camera over 1 and 15 minutes of video - hoping my work is not lost forever.

    Yep that is what I had to do...Thank you for your help

  • Firefox will not open...please help.

    My Mozilla Firefox will not open any windows, although it does start and show as running in my task manager. I have uninstalled and reinstalled it twice now and restarted my computer twice.
    I CANNOT start Firefox in safe mode by holding down shift or using the "firefox/safe" in the run box.
    I've tried it with applications closed, and open....I've tried it online and offline, I tried to run it in compatibility mode, I checked my computer for viruses...nothing helps.
    I have read every troubleshooting item here but they only say try safe mode, or do something from Firefox when it is open such as reset it. I have no add-ons or extensions on Firefox and it just worked yesterday...also my computer is brand new Windows 8.1 12GB ram 2TB harddrive and everything else works fine.
    please help

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.
    <!-- VERY important to include-->
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>

Maybe you are looking for

  • Need HELP FAST! Edited in FCP, need to burn a DVD of HD footage to SD PAL

    I have tried to read the threads and sort out my problem, but no luck. I really hope someone can help. Here's the gist.... I show up for a rehearsal for an event I have to shoot tomorrow. They asked me to shoot something today. I shot and edited a 10

  • Strange problem with select options, problem in my code or standard bug?

    I have a selection screen with no intervals. In my select option When i give a range for example BT(Between) 1 to 3 and then if i  remove 3 (s-high) value and press enter the BT changes to EQ automatically which is correct. Suppose i select BT as my

  • Positioning navigation bar  vertical rather than horizontal on side on web

    Is it possible and I think it is to place the webitem navigation_block bar on the side of the page rather than the default position on the top, without modifying the web template ( at runtime) Even during the design time I am not able to make it vert

  • Muvo2 1.5gb prob

    hi, anyone noe wats the estimated price for replacing new hdd or anything for it.. was having problem as it stuck when loading at the start and also display media error for all the option in recovery mode

  • IWeb Missing Details Page

    In iWeb, if you put an album on your site, you are suppost to be able to click on one of the photos and a details page will come up with the one picture and text, with the mini slide show at the top. But after I got the 09 version, I could only see t