After upgrading from Vista 64 64 bit to Window7 64bit the DVD stopped working

After upgrading from Vista 64 64 bit to Window7 64bit the DVD at first worked just fine but after about 7 months it just stopped responding as if the hardware as in the DVD Dive it compatible with Windows 7. I have reinstalled the full Windows 7 that I got from HP but it still has the same problem and when I try a full recovery it  will start to read the recovery DVD but it take way to long like 15 mins just to start reading and it stops reading with error's after about 2 min's into it.
Were is the errors that I get
This PC in not supported by the system recovery disc. you will not be able to continue to recover this system with these disks.
keep in mind that the problem lies with the DVD drive not working and like stated above it will work if Windows Vista 64 is installed so this error message is not the key to the problem just part of it.

Fixed the mic issue by running Windows Update and installing the latest audio drivers.
AnalogDevices - Audio - SoundMAX Integrated Digital HD Audio
Installation date: ‎11/‎1/‎2009 8:35 AM
Installation status: Successful
Update type: Optional
AnalogDevices Audio software update released in June, 2009

Similar Messages

  • C6150 won't print after upgrade from Vista to Win 7

    Hello.
    I have a C6150 AIO that worked fine under Vista.  Since I've upgraded to Win 7, I cannot get a printout from any application or the Windows test print.  The HP Solution Center test print works fine.
    -  Printer is hooked up wirelessly
    -  I've installed the latest driver from HP that is supposed to be Win 7 ready
    -  I've also installed the patch they recommend after upgrading from Vista
    There is no error.  Print job shows up briefly in the print manager window, then disappears as though it printed.  I'm at a loss, any help would be appreciated.
    Paul
    This question was solved.
    View Solution.

    I hope I have now sorted this problem.....
    After numerous atems to install HP Windows 7 drivers & apps and failing I decided to restore the PCs to the day before I first installed the Drivers etc.
    Then I unistall HP software and reinstalled the new drivers etc. This I had to do a couple of times on the Laptop (restore 3 days back).
    After installing the HP software you can print a test page, print OK. Then goto printer properties and ty to print a test page from there, if this is unsuccessful  restore system and start again.  Most it took me was three attemps.
    Now allI have to do is hope that the windows updates dont mess it all up again!
    Hope this helps you......... Good luck

  • Elements 5 will not start from the windows old file after upgrading from vista to win 7

    Elements 5 will not start from windows.old after upgrading from vista to win 7

    Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
    What exactly happens ? Can you see the processes running in Task-manager?

  • Monitor HP w2338h area shrank after upgrade from vista 64 to 7

    Monitor HP w2338h  area shrank By 3/4in both sides &1/2in top & Bottom  after upgrade from vista to 7 Tried settings to max resolution On HP Pavilion a6857c Please Advise, I also reloaded the drivers for my Video card  a ATI Radoen 5450 HD and all updates for windows 7 home Premeium 64bit & HP updates
    This question was solved.
    View Solution.

    Glad to help!
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • After "upgrading" from trial to FCPX 10.0.3 multi cam does not work

    After "upgrading" from trial to FCPX 10.0.3, multi cam does not work anymore. Everything was fine in the trial version, but now the multicam clip I made in trail is shown, but not with the 4 windows, only the first angle can be seen. And I can not find (import) the cuts I made in the trail. The settings are the same in both versions. Am I missing something? Is it possible that I have to start from scratch and all work is lost?
    When I double click the multi cam clip I see all four angles in the timeline, one underneath the other... 
    Any help is appreciated! Thanks!

    There is an excellent podcast tutorial series called "Creative COW Final Cut Help Tutorials Podcast (SD)"
    in the iTunes Store.
    The latest three are video podcasts and go into great depth concerning the new Multicam in 10.0.3
    Can't recommend them enough.

  • Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgra

    I'm using iPhone 5
    Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgrading to ios7. I now hate apple and I'm thing of getting samsung.

    Basic troubleshooting
    Reset
    Restore with backup
    Restore as new ( better )

  • I upgraded my iPhone 4 to ios 7.4 and the screen stopped working i can not use the phone How to fix it ?.

    I upgraded my iPhone 4 to ios 7.4 and the screen stopped working i can not use the phone How to fix it ?.

    Hold the HOME and SLEEP buttons at the same time until an Apple logo appears. If nothing has happened after holding for 30 seconds charge the phone for 15 minutes with the wall adapter and try again.

  • PE7 Edit functions Not Working well after Upgrading from Vista to Windows 7

    My PE 7 was working very well under Vista Home Premium - 64 Bit. But after I upgraded (not clean install) to Windows 7 Home Premium - 64 Bit, it appears that the PE7 is working OK except for the EDIT functions.
    I am talking about the Tool Icons on the left side. When I select any icon, the Mouse Curser does NOT chnage to reflect the proper shape. For example, when I click the Crop Tool, my mouse curser chnages to 3 little (tiny) crop icons in a row, and the crop functions don't work like they should.
    Can anyone please help as to waht I need to do to correct this situation.
    Thank you.

    Over at elements village there are a couple threads about this
    on windows 7.
    I have never had this problem, but other users say the solution
    in these threads works.
    So it might be worth a try.
    http://www.elementsvillage.com/forums/showthread.php?t=55922
    http://www.elementsvillage.com/forums/showthread.php?t=54101
    Hope this helps.
    MTSTUNER

  • Can't print from IE 8 after upgrading from Vista to Windows 7

    My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
    I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
    Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
    Any ideas? Thanks for any help.
    Jeff
    This question was solved.
    View Solution.

    (same poster)
    If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
    Specifically, the following steps solved the problem:
    1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
    2. From a command prompt, issue this command:  ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
    Jeff

  • Cleanup after upgrading from Vista to Windows 7

    I have installed (upgraded from Vista)  Windows 7 on my X301 machine.   I am wondering if thedata on the drives Q(lenovo) and S(Servicev003) is still needed?

    only if you want to recover to vista the Q partition is used for creating recovery disc the s partition is used for recovering to factory state which would be vista
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • After upgrading from FM 9 to 11, FM crashes when the Print Book command is used. Suggestions?

    After upgrading from FrameMaker 9 to 11, the program crashes when the Print Book command is selected to print files that were converted from FM 9 to FM11. (Resulting .pdf files are problematic, w/ broken links and non-functioning bookmarks.)  Has anyone encountered this issue, and can you suggest a workaround? Thank you!

    Known bug - already fixed - get the latest FM11 patch

  • After upgrading to ios 7.03 my ipad freezes, but the clock still works

    Hi, after upgrading to iOS 7.03 my ipad freezes, but the clock is still running. So i reset it and it works again. I'm using the logitech solar keyboard folio with it. It has worked flawlessly before the upgrade. It seems to happen intermittently. When it first happened I had the keyboard lock on. Then the screen was black, but when connecting it to my pc, itunes could recognize the ipad and I could backup everything. It happened occasionally, so I removed the keyboard lock. This seemed to help at first, but now it freezes anyways. Only difference is I can see the background and my apps on one of the pages. And the clock is running.
    Help much appriciated.

    Both of you please choose the correct forum to start a new topic thread.  Classic has nothing to do with iOS.
    Site map of Communities and Categories

  • Need to Re-activate CS4 after upgrade from Vista to Windows 7 (32 bit)

    I have a laptop running Vista 32-bit with Lightroom 2.7 and Photoshop CS4 installed.  I'm planning to upgrade the computer from Vista 32-bit to Windows 7 32-bit, upgrading in place to avoid having to reformat and reinstall all the software.  Will Photoshop still be activated after the upgrade or will I need to re-activate it?  If I need to reactivate, will the OS change make the activation process think the software has been moved to a new computer?  It is currently activated on two machines (one of which is this laptop) as it is and don't want the activation wizard to think I'm putting it on third machine in violation of the license.  Should I de-activate it before upgrading the OS and then re-activate once the system upgrade is complete?  After the OS change I plan to upgrade the Adobe software to Lightroom 3 and PS CS5 - does the activation of CS4 even matter in that case?  Anyone done a Vista->Win7 upgrade in place and offer any suggestions?

    You are a brave man indeed, John.
    An in-place upgrade is still a bad idea though.
    -Noel

  • After upgrading from Vista to Windows 7, Firefox lost all my stored passwords, never asks to save them, even though I've checked box for saving them, have made sure history is not cleared, and am not in Private Browsing.

    In Windows 7, Firefox 8.0 does not ask to save passwords, and does not save, them, even though I checked the box to save passwords. I have confirmed that clearing history is not on and that I am not in Private Browsing. This is so frustrating, it almost makes me want to go back to Vista. I have looked at all the suggestions to fix the problem in "Help" and have followed the suggestions, and none of them help.

    I have the TX2 1012NR and its can upgrade just fine!  Here is a few recommendations "only if u have the HP Upgrade program disks"
    If you have them you can install a clean copy and delete everything... Do not use the use me first disk included because it prompts you to install an older BIOS....  Just use the windows 7 upgrade disk and start the process.  The clean install clears your entire drive but does not void your warranty!   When you use the use me first disk after the install it actually loads everything else needed to get you up in running.  The touchscreen driver and the HP Mediasmart programs will have to be downloaded from the HP support site.  Once again its recommended that if there were any programs installed delete them do not try to update them!  This causes issues and countless errors.  Specifically with touchscreen drivers etc uninstall them before installing the ones from HP support.  I found this was not the easy way to do it but the best way...  I also recommend that when doing any sort of BIOS update that you remove your Battery and leave it connected to a power cord only!  Last but not least if you really mess up and its under warranty... Send it to HP they will set it back up to factory defaults under Windows Vista with the more up to date BIOS installed.  I hope my information helps! Sure you might loose some programs but in the end your computer runs faster and smoother because all the programs installed are made for Windows 7....  Also they did release the Touch Pack for download from the Microsoft website here is a link telling more about the features and benefits and how to get it as it is a totally free download... 
    http://windowsteamblog.com/windows/b/windows7/archive/2009/05/27/introducing-the-microsoft-touch-pac...
    Microsoft Link for download:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=b152fadd-82e4-4ddb-a46a-aebe49944428&displa...

  • Pre7 after upgrade from Vista to Windows 7 (Ultimate 64bit)

    I recently upgraded my Vista Ultimate (64bit) computer to Windows 7 Ultimate (64bit).  This was an upgrade, not a clean, fresh install.  Today is the first time I have tried to run PRE7 under Windows 7.  Prior to the upgrade, I had no problems to speak of with PRE7 and the PhotoShop.com Plus account that I set up with it.  Now whenever I start PRE7 under Windows 7, I get the "Install Full Content" dialog informing me that a reduced set of content has been installed and that I need to install the full set of content from the installation DVD.  Now believe me when I say that the full set of content was installed under Vista and that I never got such a dialog box prior to Windows 7.  In addition, after clicking OK to continue, the PhotoShop.com membership did not log on automatically as I am used to it doing.  I don't remember exactly now what I had to do, but to the best of my recollection, after I logged on to my account it was telling me that I needed to verify my account, which I did.  I subsequently received an email with a verification link in it.  After clicking on the link my account was verified and now when I start PRE7, it automatically logs me on to my PhotoShop.com account, as I am used to it doing.  I still get the "Install Full Content" dialog, though.  I thought I would ask in this forum if anyone else has experienced these two anomalous behaviors after ungrading to Windows 7, before I attempt to go thorough the motions of actually reinstalling the full content, which should not actually be necessary.
    Thank you,
    Charles Lawrence

    Why it's happening is a mystery. My guess would be that the upgrade in the OS is part of the problem, but that is just a guess. Some have reported that Win7 does the upgrade thing better than any previous OS, but others report all sorts of odd problems, when doing it this way.
    If you have the DVD, then I'd try a Repair Install, to see if it picks up the Functional Content.
    Otherwise, I am at a loss as to why, when you upgraded your OS, PrE 7 lost the link to that material.
    Good luck,
    Hunt

Maybe you are looking for