After upgrading ipad to ios7.1.2, keep prompting to restore ipad

i have upgraded my ipad from ios4.3.3 to ios7.1.2.
After upgrading, i have to setup my ipad and was stuck at restore. It kept prompting me to restore my ipad but it did not work.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Similar Messages

  • After upgrading iPad to iOS8, cannot sign in to iCloud. Password it not accepted even after resetting it. Sign-in box keeps popping up. Suggestions?

    After upgrading iPad to iOS8, iPad cannot sign in to iCloud. Password is not accepted even after resetting it. Sign-in box keeps popping up. Suggestions?

    This Apple Help page provides contact information for various countries for security problems with an Apple ID:
    http://support.apple.com/en-us/HT5699

  • After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

    After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • I had a MobileMe account before... after upgrading to iOS 5, should I keep my account info under iCloud (settings) AND under mail, contacts and calendars (in Settings as well) or only keep the info under the new iCloud setting section?

    I had a MobileMe account before... after upgrading to iOS 5, should I keep my account info under iCloud (settings) AND under mail, contacts and calendars (in Settings as well) or only keep the info under the new iCloud setting section?

    That's not the correct port. It should be 993 for incoming.
    If you signed into iCloud from the System Preferences, it should automatically create the iCloud account for you in Mail. Sounds like it is an account you already had set up for MMe in Mail.
    Open Mail preferences, open the Accounts tab, disable that account in the advanced pane.
    Open Sys Prefs, open the iCloud tab, and sign out of iCloud. Then sign back in and see if a new iCloud account is automatically created.

  • After upgrading ipad to iOS 7.1 I can no longer close open apps by double clicking home button. Any other way to close open apps?

    After upgrading ipad to iOS 7.1 I can no longer close open apps by double clicking home button.  Any ideas

    Double-tap on the Home button. You will see a preview of the app above the actual icon. Slide the preview up to kill it.
    Please get the iPhone User Guide (For iOS 7 Software)Sep 19, 2013 - 23 MB.

  • After upgrading to OS X Yosemite, I keep getting popups asking for my "Local Items" keychain for cloudd, calendar, messenger and on and on...and then it wants me to change my password, only won't accept it when I do.

    After upgrading to OS X Yosemite, I keep getting popups asking for my "Local Items" keychain for cloudd, calendar, messenger and on and on...and then it wants me to change my password, only won't accept it when I do.

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried, testing after each one, until it's resolved. Back up all data before making any changes.
    Step 1
    Follow the directions in this support article.
    Step 2
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Select the iCloud keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password.
    Select
              Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain.
    Step 3
    Open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.
    Step 4
    Open the Keychains folder as in Step 1. There should be a file in that folder with the name "login.keychain". If there is also a file iwith the name "login_renamed_1.keychain", then please do as follows:
    ☞ Rename login.keychain to "login-old.keychain".
    ☞ Rename login_renamed_1.keychain to "login.keychain".
    You can then close the folder. 
    Delete the login keychain from the keychain list in Keychain Access. Choose
               Delete References
    when prompted, not Delete References & Files.
    Select
              File ▹ Add Keychain...
    from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file now named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred. 
    Run Keychain First Aid again. Quit Keychain Access.

  • My ipad mini is in recovery  mode after upgrading to ios 7. When i tried to restore it through itunes it says an error occured in restoring ... please help.......

    my ipad mini is in recovery  mode after upgrading to ios 7. When i tried to restore it through itunes it says an error occured in restoring ... please help.......

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • Has Anyone Had Good Luck After Upgrading iPad 1 To iOS5e Experiences With iPad 1

    Guessing, but posts here seem 20:1 negative after upgrading iPad 1 to iOS5.
    Most common is huge slowdown in response and crashing.
    I'm a typical user in that I rarely post if not having trouble, so I suspect there are many iPad 1 users that have upgraded to iOS5 and have not noticed any significant hit in performance.
    I'd like to hear from you folks that are happy.
    Due to all the negative posts I'm holding up on upgrading my iPad 1 3G 64GB as my understanding is that there is no going back to iOS 4.3 after the upgrade to iOS5.
    Should I upgrade or wait for an update?

    iPad1, 64GB, 3G. I updated to iOS5 a couple of days after it was released (servers were too slow to connect on the first day. )  I had only one crash, and that was my fault.  (Moved Newsstand to a folder, which is not supported.)  Otherwise, all is fine.  As others have noted, on the iPad1, it's a bit slower, but nothing that's a dealbreaker IMHO.
    The most difficult thing has been the amount of updates to the apps.  Nearly every app I have had an update for iOS5 so it was like I was seeing 3-5 new updates every day.  But I've kept with the updates and I think that has helped with my lack of crashes/lockups.
    My only real complaint is with the way the iPod app changed to the Music app and how it now treats podcasts.  (The "previously played" indicator is now missing.)  And a few minor gripes like not having location based reminders (iPhone only feature. )  But otherwise, I'm reasonably satisfied with the update on my device.
    If I had to make a recommendation, I'd be on the fence.  If there is a "must have" feature you want (e.g.: Airport configuration utility, Messages, Twitter integration,) then go ahead an update.  Otherwise, not updating now is probably not going to inconvinience you.  Eventually, there may be "iOS5 only" apps but by then, you'll probably be ready for a new iPad. 

  • I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.

    I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.

    WORKAROUND FOUND ! Download and install "Awesome Camera" app and take a picture with that app. After 1-2 seconds of standby, it will work. Then you can go back to default Camera app which would work again.Please let me know

  • Finder keeps prompting a 'Restore Windows'

    After installing Lion, Finder went nuts and started prompting a 'Restore Windows' warning. I've tried everything but but just doesn't go away... Other programs work but Finder. I'm in the process of reinstalling Lion again from Recovery.
    If anyone has had the same problem please advise me. Thank you

    I'm afraid that deleting Trash didn't help me.
    We're still getting the loop of Finder crashing and restarting with the "Restore Windows" prompt which disappears before we can click on an option.
    Currently using Spotlight to run commands like Console !
    I've tried Repiaing Permissions and restarting with the Restore Windows button unchecked to no avail.
    - Paul
    Console shows
    ============================
    26/07/2011 08:07:55.489 com.apple.launchd.peruser.502: (com.apple.Finder[4390]) Job appears to have crashed: Segmentation fault: 11
    26/07/2011 08:07:55.843 ReportCrash: Saved crash report for Finder[4390] version 10.7 (10.7) to /Users/niki/Library/Logs/DiagnosticReports/Finder_2011-07-26-080755_kitchenmac. crash
    26/07/2011 08:07:55.846 ReportCrash: Removing excessive log: /Users/niki/Library/Logs/DiagnosticReports/Finder_2011-07-26-080722_kitchenmac. crash
    26/07/2011 08:07:57.106 com.apple.launchd.peruser.502: (com.apple.Finder[4392]) Job appears to have crashed: Segmentation fault: 11
    26/07/2011 08:07:57.483 ReportCrash: Saved crash report for Finder[4392] version 10.7 (10.7) to /Users/niki/Library/Logs/DiagnosticReports/Finder_2011-07-26-080757_kitchenmac. crash
    26/07/2011 08:07:57.489 ReportCrash: Removing excessive log: /Users/niki/Library/Logs/DiagnosticReports/Finder_2011-07-26-080723_kitchenmac. crash
    26/07/2011 08:07:58.929 com.apple.launchd.peruser.502: (com.apple.Finder[4394]) Job appears to have crashed: Segmentation fault: 11
    26/07/2011 08:07:59.454 ReportCrash: Saved crash report for Finder[4394] version 10.7 (10.7) to /Users/niki/Library/Logs/DiagnosticReports/Finder_2011-07-26-080759_kitchenmac. crash
    26/07/2011 08:07:59.462 ReportCrash: Removing excessive log:
    and
    Process:         Finder [3263]
    Path:            /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
    Identifier:      Finder
    Version:         ??? (???)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [218]
    Date/Time:       2011-07-26 07:47:25.138 +0100
    OS Version:      Mac OS X 10.7 (11A511)
    Report Version:  9
    Crashed Thread:  4  Dispatch queue: com.apple.root.default-priority
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000

  • Problems after upgrading iPhone5 till IOS7...

    After upgrading my iPhone5 till IOS7 my two dictionary apps from Gyldendal (English large and Spanish mini) does not work at all. In contrast the German dictionary - also from Gyldendal - is running well. I already have tried to move the app from the iPhone and reinstalled it from the App Store without success. What to do? Best regards OleF

    In relation to the English dictionary apps from Gyldendal it was succeded. But still the Spanish dictonary is not working. But at the App Store page of the Spanish dictonary the system tells that there might be some problems running this App... - and an updating is comming soon. Anyway thanks for the good advice. :-) OleF

  • Digital AV Adapter: "Accessory not supported" and "TV Out" settings gone after upgrading iPad 2 to iOS 5.0.1

    I've used the digital AV Adapter (bought in Apple Store) nicely on iPad 2 with iOS 4.3.x.
    After upgrading to iOS 5.0.1 the TV Out settings have disappeared from the General Settings menu (no matter if adapter is plugged in or not).
    I thought that maybe it was time to do a full reset (just in case), so I did that, while the adapter was still plugged in.
    When the iPad finished resetting I got a popup message on the lock screen saying:
    "This Accessory is Not Supported by iPad"
    The adapter sort of works, i.e. there is a picture on my TV, but I cannot control the TV output settings which I could in iOS 4.3.x.
    The TV Out settings are completely missing from the General Settings menu (if they were moved in iOS 5.0.1 somewhere else, I could not find them).
    The "TV Out" menu item is not there at all.
    I cannot select between PAL/NTSC output anymore which is crucial for me as it seems that the iPad current setting is PAL, while I need to be it NTSC, otherwise video drop frames/stutters when played back over a TV.
    What I would like to know if there is anybody out there who has iOS 5.0.1 and actually can see the "TV Out" settings under the General Settings (I think it should follow the "iTunes Wi-Fi Sync" directly), because no matter what I did I cannot the settings menu to be displayed (I've reset the device, plugged and unplugged the adaptor and HDMI cable multiple times, tried different TVs, etc)
    Or, if the settings are in fact, gone by design, then how am I supposed to play 23.976 or 24 FPS media on a 1080p50 TV without stuttering (don't answer that, I know it is impossible, I am just frustrated). This is the first ever device I bought from Apple and I must say I am not that impressed by such turn of events.
    I mean, what kind of update removes essential features and makes the officially produced accessory suddenly "not supported"? Did they even test their own official accessory?? Seems not to me.
    This thread is talking about sort of similar issue (although it is about the VGA adapter):
    https://discussions.apple.com/thread/2413622?start=0&tstart=0

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • Purchased iBook disappeared after upgrading iPad to iOS 8.  Unable to re-download.

    A student at my school recently lost an iBook after upgrading his iPad to iOS 8.  After the upgrade, the book was just no longer on his bookshelf.  Now, when trying to re-download from his Purchased list, the book just appears grayed out and does not download. He can download the book on his iPhone, which is iOS 7.  We've tried:  closing/re-opening iBooks, signing out/in of his Apple ID, Home button-Power button resetting the iPad, signing out of iTunes, checking storage despite not getting any errors (has 3GB available, book is under 10MB).  No luck with any of that.. just a grayed out book that won't download.  Does anyone have any suggestions?  Thanks

    Thank you SO much Stephaniefromlancaster -
    I tried your solution and you're not nuts   It worked!!!

  • C1000A CenturyLink modems freezing after upgrading iPad Air and 5S to 8.0

    I have discovered that after upgrading to 8.0, my C1000A modem stops working when I connect with my 5S and iPad Air.  I thought my modem was going bad, but when I went to my mother's house the same thing happened.  There is something different with 8.0 that is causing the C1000A modems to stop working.   Has anyone else ran into this issue?  I would hate to go somewhere and shut down the WiFi at Culver's for instance because 8.0 has some sort of weird bug. 

    It looks like Apple has a another bug to squash.  It appears the issue with locking up my C1000A has to due with IPV6.  I hit the reset button on my modem and IPV6 was turned off.  I turned IPV6 back on and while I was testing connectivity with http://test-ipv6.com  my modem locked up.  I turned off IPV6 and no issues so far.

  • After upgrading iPad won't even turn on

    How do you get it on? After upgrading, and out of town, I am frustrated it won't even work. Why does upgrading destroy them? That is what it seems happens!

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

Maybe you are looking for

  • 5K iMac - how to run 2 Displays at 60Hz

    We are having issues getting the Dell P2715Q monitor to run at 4K and 60HZ. We have a 5K Retina iMac and the display is connected through Dell's miniDP to Displayport cable that came with the display. All is great (4K and 60Hz), but the minute we plu

  • How to optimise the intermedia search query  when using contains?

    HI there, I have a query to search my database in two tables on eight columns. So that I have eight indexes which are in a different tablespace. Now I have written a query like select * from table1,table2 where contains(col1,'wordlist1', 1)>0 and con

  • Performance of multiple Iterators

    Hi, my question is, which alternative will be faster. I have a class and I'm running several Iterators after each other. However, the elements in the Iterators are of the same type, so there are two possibilities: //case 1: create a new Iterator and

  • Copy/paste report with a macro.

    Hi all, I want to know if a macro VBA able to copy/paste a report (the equivalent of report action --> Copy report / Paste report) exists ? Thank you in advance.

  • Login crashes at loading home directories

    I hope someone can point me in the right direction. About 2 weeks ago I replaced our network router with a brand new one. There were no directions for manual install, just a "wizard" to run for setup. BECAUSE I AM AN IDIOT I used the closest computer