After upgrading my Aperture software, the adjustment tools don't work on most my projects. only a few. what happened?
Help... After upgrading, only SOME of my libraries allow the adjustments tools to work. What do I do to regain access that allows me to edit my photos?
I recall that from Aperture 2 to 3 the RAW decoder was updated and some of the adjustments required you to manually reprocess the RAW file using the new decoder. I don't remember the exact button but it appears on top with the RAW decode brick and says something like reprocess RAW. Once you do this, the new adjustments will work.
This only would matter if you are using RAW files.
Similar Messages
-
After upgrading to Mavericks, F14/F15 brightness adjustments don't work
After upgrading to Mavericks, F14/F15 brightness adjustments don't work. The screen appears to be "locked" at the dimmest brightness level. How do I adjust the brightness?
I am home now and I just confirmed that I have a brightness control slide in my Sys Pre---> Display. However, this for my Apple Cinema display. When I was using another name brand, this wasn't available to me. Nor could I use F1 and F2.
I also went to Sys Pre---> Keyboard---> Shortcuts---> Display---> Changed those values to F5 and F6, since they were free for me. And they were able to change the brightness for me. Went to test them, and I was just given that error chim and nothing on the display changed.
So I went on down the list... Accessibility---> checked Contrast and changed those to F5 and F6. Ahhh, now I can change that. Now I know that I can use the F5 and F6 for something.
I know that you are talking about brightness, but double check the Contrast settings to see if you were mistaking the two. After years of setting my TV with Video Essentials, I still get the two mixed up from time to time.
KOT -
Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help. I try to go to settings and the volume won't go up there either I have the home button gesture and still the same. I try resting my iPad and nothing no sound work unless I have my headphones in. Do anybody know how to fix this
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore -
After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??
My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi -
HT5012 Y after upgrade to iOS 7.0.1 wayfai don't work
The wi-fi stop working after upgrade to iOS 7.1 watt can I do pls help me
settings - general - reset - reset network settings.
-
Spot healing, lasso, and the move tool don't work
These tools don't do anything. I can find them and select but nothing happens.
Good day!
Selecting the Tools should not cause anything much to happen yet (apart from the cursor icon and the Options Bar reflecting the Tool selected).
What exactly do you do for example with the Lasso Tool?
Could you please post a screenshot to illustrate the issue?
Regards,
Pfaffenbichler -
After upgrading form FF 5 - FF 6, javascript don't work
I have a site, using the next javascript:<br />
<br />
<pre><nowiki><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=UTF-8">
<HEAD>
<!-- Generate table option menu : http://www.htmlbasix.com/dropmenu.shtml -->
<SCRIPT LANGUAGE='JAVASCRIPT' TYPE='TEXT/JAVASCRIPT'>
<!--
var popupWindow=null;
function popup(mypage;myname;w;h;pos;infocus){
if (pos == 'random')
{LeftPosition=(screen.width)?Math.floor(Math.random()*(screen.width-w)):100;TopPosition=(screen.height)?Math.floor(Math.random()*((screen.height-h)-75)):100;}
else
{LeftPosition=(screen.width)?(screen.width-w)/2:100;TopPosition=(screen.height)?(screen.height-h)/2:100;}
settings='width='+ w + ';height='+ h + ';top=' + TopPosition + ';left=' + LeftPosition + ';scrollbars=yes;location=no;directories=no;status=no;menubar=no;toolbar=yes;resizable=yes';popupWindow=window.open('';myname;settings);
if(infocus=='front'){popupWindow.focus();popupWindow.location=mypage;}
if(infocus=='back'){popupWindow.blur();popupWindow.location=mypage;popupWindow.blur();}
// -->
</script></nowiki></pre>
<br />
and I used the next to call the javascript:
<pre><nowiki><a target="_blank" href="javascript:void(str=prompt(%22Enter Case Number: %22;%22%22));if(str){location.href=%22http://mysite.com/mysupport/index.jsf?CASE_NUMBER=%22+escape(str).split(%22%20%22).join(%22+%22);}">View Case</a></nowiki></pre>
<br />
Prior FF6 it worked as charm, but with FF, it doesn't work anymore.
Anyone, idea ?
BTW - Javascript is enabled in FF.The Problem is with <a href> in FF6 version.
Replace
<a target="_blank" href="javascript:void(str=prompt(%22Enter Case Number: %22;%22%22));if(str){location.href=%22http://mysite.com/mysupport/index.jsf?CASE_NUMBER=%22+escape(str).split(%22%20%22).join(%22+%22);}">View Case</a>
With
<a href="#" onClick="javascript:void(str=prompt(%22Enter Case Number: %22;%22%22));if(str){location.href=%22http://mysite.com/mysupport/index.jsf?CASE_NUMBER=%22+escape(str).split(%22%20%22).join(%22+%22);}">View Case</a>
OR
<a target="_self" href="javascript:void(str=prompt(%22Enter Case Number: %22;%22%22));if(str){location.href=%22http://mysite.com/mysupport/index.jsf?CASE_NUMBER=%22+escape(str).split(%22%20%22).join(%22+%22);}">View Case</a> -
I use iphone 3GS, after upgraded to ios5, my phone restart when i took picture with button and while playing music .. what happened?
Basic troubleshooting steps in the following order.
1. Reset. Press and hold both Power and Home Buttons together till Apple Logo appears.
2. Restore to a backup.
3. Backup, Restore in iTunes and setup as new. -
After upgrading to Aperture 3 I had to 'upgrade' all files. When this was done, there was an Aperture 3 library and the original Aperture 2 library. Are the two libraries identical and can I safely trash the Aperture 2 library?
If the upgrade completed successfully and you are running Aperture 3 on the converted library and you're sure all the images that were in the old library are in the new library then you could delete the Aperture 2 library.
However I'm the paranoid type and when it comes to deleting images I'm always hesitant. If you can fine a place to archive the old library that would be your a better option.
At a minimum I would keep the old library around for a month or so after switching to Aperture 3 just to make sure in case something pops up.
regards -
After upgrading my iPhone4 to the latest IO it no longer connects to wifi, how do you fix this?
After upgrading my iPhone4 to the latest IO it no longer connects to wifi, how do you fix this?
knifepainter wrote:
What I know is that the phone worked perfectly fine until I upgraded the software. I've tried resetting the network settings to no avail. I've shut the phone off, put it in a ziplock baggie and then into the freezer for 15 minutes. This made the wifi work temporarily but then it goes back to being grayed out. The wifi does not work at other wifi sites away from my home as well. Seems like an apple issue to me and would appreciate someone coming up with a fix, apparently I'm not the only one having this problem. Thanks for replying to my query, any ideas?
It's likely a hardware issue. The iOS will not directly cause this issue.
Use this article first:
iOS: Wi-Fi settings grayed out or dim - http://support.apple.com/en-us/TS1559
If that fails to resolve it, then try setting it up as new and testing again.
How to erase your iOS device and then set it up as a new device or restore it from backups - http://support.apple.com/en-us/HT4137
If the issue remains even after set up as new, it's a hardware problem, not a software problem. You'll need to contact Apple for you hardware service options. If within warranty it should be free. If not, expect to pay $149 USD + tax if it's an iPhone 4, $199 USD + tax if it's an iPhone 4S. -
My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Existing stacks not working after upgrading to Aperture 3
I am having an issue regarding my stacks after upgrading from Aperture 2 to the new Aperture 3. When I select any of my existing stacks that came over from my Aperture 2 library to Aperture 3's library, my stacks will not expand to show my images associated with that particular stack. Also, when I click to expand the stack, instead of showing how many images are in a stack, it shows "1 of x" (x being the number of images associated with that stack). When I go to unstack, it removes all of the stacked images, only leaving the pick visible in Aperture 3. This only happens with my existing stacks; it does not happen when I create a new stack in Aperture 3. Anyone else having this issue?!? Is there a solution to rectify this problem?
As strange as this sounds, I may have solved my own question! I created a new blank project, and then I took the photos from the "Photos" section in the Library, and clicked and dragged them in -- and low and behold, the stacks were there! It took the photos out of the original project and moved them to the new project -- stacks, edits, and all. If anyone else is having this issue, this might be the fix.
-
Firefox 8 starts after upgrade but none of the windows are visible and it crashes on quit
Firefox 8 starts after upgrade but none of the windows are visible and it crashes on quit
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
* https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
See:
* http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
* https://support.mozilla.com/kb/Mozilla+Crash+Reporter
* https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report -
After upgrading my IPad software to iOS I lost all my picture albums!!! Any suggestions? Why did that happened?
Monmere-
Also check the print queue to see if a print job has gotten stuck. Click the home button twice and you should see recently used programs across the bottom of the screen. Scroll across to find the print queue.
Fred -
Synchronization failure after upgrade to Desktop Software v.7.0
When trying to synchronize with Outlook after upgrade to Desktop Software v.7.0 got a message "CRADSDatabase ERROR (5211): There is an error converting Unicode string to or from code page string". The other options like device backup, synchronization of images and videos, file transfer, work fine. I am on BB Bold9700 (v.6.0, 2949) and Sony Vaio with Windows 7. The direction of synchronization does not matter and the same error pops up when e.g. only Tasks are attempted to synchronize. There were no problems with Desktop Software v.6.
Hello again.
I have a few ideas...including the registry cleansing that you did not do, along with the other things in that thread that you may have skipped over.
In addition, hHere is the list of troubleshooting articles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone due to administrative permissions
KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when user account control is enabled
KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when a full version of Roxio® Media Manager is installed
KB28456 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when USB selective suspend setting is enabled
KB28444 The BlackBerry smartphone is not detected by BlackBerry Desktop Software when connected by USB to a USB hub or a docking station
KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when it is connected via USB
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB00125BlackBerry Desktop Software cannot detect the BlackBerry smartphone
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. Also apologies if any are not presently available...RIM takes them up and down at will as they revise things.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Hi, I have created an ageing report for AR in BW 3.1 My report has two columns. One is Debit amount in Local currency and Debit amount in Group currency (USD) Though the amounts in both the columns is correct; it shows ERROR word in front of the amou
-
Can I Use Designer 6i on Oracle 9i database
Please can I use designer 6i on an Oracle 9i database. I tried it and I could not log on as user SYS . Are there any configurations I need to do. What is the order of installation. Designer 6i - Forms 6i - Oracle 9i database or Forms 6i - Designer 6i
-
Hi dudes, i have made all settings that necessary for batch determination for components in process order, from condtion table to search strategy(COB1), but when i am doing BD for componets in process order, the sorting rule and selection class is no
-
Consolas font rendering issues
Hi All, Consolas font is not getting rendered properly with Konsole on KDE & Openbox. LXTerminal on KDE is displaying the same behaviour. But it works well with LXterminal on Openbox 3.5.2. Any idea where the problem could be? http://aruncpp.blogspot
-
How to define Shipping Type as Item Level?
Hello all, Currently the Shipping Type field (VBKD-VSART) is defined as Header Level. What to do in order to modify Shipping Type as Item Level? Many Thanks, Barbara