After upgrading my windows 8.1 PC to windows 10, my Acer T272HL 27" touchscreen lost touch functions

After upgrading my windows 8.1 PC to Windows 10, my Acer T272HL 27" touchscreen monitor is no longer listed as being touch compliant, has lost all touchscreen functionality, and the hid touchscreen listing has disappeared from the device manager: frustrated! Have, of course, uninstalled & reinstalled the monitor correctly,& windows still denotes it as non touchscreen. Of course, hdmi cable & USB 3.0 cables firmly connected....Thanks much in advance..

cathound7,
There should be something listed in the USB section for the monitor touch functionality. My only suggestion would be to uninstall the drivers for the monitor (again), remove the USB cable, and restart the system. See if it picks up the monitor and tries to install the drivers, then connect the USB cable and see if it tried to install the touch functionality.

Similar Messages

When i used windows 8 i lost touch function

I have brought the woundrful Hp touch smar 600 pc with windows 7 as default os but when i used windows 8 the screen lost touch function and i have heared thatregaing this function could be done by reinstaling this from the hp official site using the id number of the pc but i coud not dothis properly ?

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03488148&cc=us&dlc=en&lc=en
Touch screen doesn't work after upgrading to Windows 8
Follow the steps below if you upgraded to Windows 8 from a previous Windows operating system and your touch screen stopped working.
Activate Windows 8 and install updates:
Press the Windows + W keys, type Activate Windows into the Search field, and then click the icon that appears in the upper left corner of the screen.
In PC Settings, click on Activate Windows , wait for your computer to connect to Microsoft, and then follow the onscreen instructions.
Restart the computer.
Press the Windows + X keys, and select Control Panel from the list.
In the upper right corner of Control Panel, select Large icons from the View by drop-down.
Click Windows Update .
Install touch and/or graphics driver updates.
Restart the computer. If the touch screen still does not work, go on to the next step.
Check for driver updates at hp.com:
Go to hp.com (http://www8.hp.com/us/en/support-drivers.html) and click Drivers & Software .
In the search field, enter your product name or number, and then click Next .
Select your operating systems from the drop-down, and then click Next .
NOTE:For more information about your operating system and system type (32 or 64 bit), press the Windows + X keys, and select System from the list.
If there are any available graphics drivers, click the plus sign next to Driver - Graphics, and then click the driver name.
In the Download options and information window, click Download .
Follow the onscreen directions to download the driver.
Restart the computer. If the touch screen still does not work, go to the next step.
Install an older touchscreen driver from the Windows Update Catalog:
Go to Windows Update catalog (in English).
If prompted to install a 'Microsoft Update Catalog' add-on, install the add-on.
Type NextWindow in the search field and press Enter .
From the list of search results, find the driver named "NextWindow - Input - NextWindow Voltron Touch Screen", version 3.1.6.0, and made for Products Windows 7, Windows Consumer Preview (size 27.6 MB).
Click the Add button next to the name of the driver.
Click View Basket in the upper right.
Click the Download button in the upper right.
Browse to a path on your computer; such as Desktop.
NOTE: If a User Account Control message opens, click Yes .
When the download is complete, click Close .
Browse to the path chosen earlier and open the folder named "NextWindow - Input - NextWindow Voltron Touch Screen".
Double-click the .cab file inside this folder to view the contents of the cab file.
Single-click the first file and then press the keys CTRL + A to select all the files.
Right-click on any selected file and select Copy .
Click the Back arrow in the upper left of the window to go back to the folder named "NextWindow - Input - NextWindow Voltron Touch Screen". The only file in this folder should be the one cab file that was downloaded earlier.
Right-click inside the blank or white portion of this window and select Paste . All of the files from the .cab file are extracted into this folder.
Double-click the file named NVWVoltronSetupLiteDesktop_3.1.6.0.f.exe .
NOTE: If a User Account Control message opens, click Yes .
The driver Setup Wizard opens. Click Next to start the installation. Read and respond to the Windows to install the driver.
After the driver is installed, restart the computer. If the touch screen still does not work, go to the next step.
Disable the graphics card:
Press the Windows + X keys, and select Device Manager from the list.
In Device Manager, click the triangle next to Display adapters to expand the list.
Right-click on the graphics card, and then select Disable .
On the Window that reads "Disabling this device will cause it to stop functioning. Do you really want to disable it?", click Yes .
Restart the computer. If the touch screen still does not work, the computer should be serviced.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

After upgrade Lion to Mavericks, can't run Windows 7 on boot camp because is hidden/disabled

The question is about iMac (21.5-inch, Mid 2011)
It was with Lion, there was a Windows 7 (32bit) partition created by Boot Camp v4.
So, I made the upgrade to Mavericks (no clean install), after this when iMac start and holding "ALT" button no longer appears the option to boot into Windows!
EDIT: I installed rEFit, now I can see Win partition but when I select it system says: "A disk read error occured Press Ctrl+Alt+Del to restart"
I am sure that Win partition there is yet because when I'm booting Mac OS X and opening "boot camp assistant" it says me eventually remove the Win7 partition, and because I can see in the "Disk Utility" there's still the partition (disk0s4).
It's because MBR is broken after upgrade to Mavericks?
Please help me
Thanks

When bootcamp start, between the choises is to create a bootable usb disk. So you need to choose this and put your windows 7 cdrom inside and an empty usb flash disk. Then the program will take the Win7 file from the copy you have and will create a new copy in you usb disk. Then it will use the new copy for the installation and normally no error will appear.

After upgrading to 10.2.2.12 on windows XP SP3 , itunes does not display any summary info or buttons/options. The buttons work but it does not display the text on the button or the options available.

I recently upgraded the iTunes software to 10.2.2.12 on my Windows XP laptop. Since then, iTunes stopped displaying the Summary info
, the text on the buttons, the various drop down options. The buttons seem to be working but I can't tell what that button is supposed to do
or the option I am selecting. This is preventing me from syncing my photos to the laptop.
this was not a problem with the previous version of iTunes.
Actions taken :
- I tried downloading iTunes again and repairing the install. That did not fix it.
- Don't want to uninstall it as I am worried that I would lose all the songs and the purchases etc.
1. Has anyone encountered this ?
2. Is there a solution for this ?
Many thanks in advance for your time and help
Nitin

bmalones44 wrote:
b noir, my Windows 7 machine is having the exact same issue as nsadal, and I have already confirmed that all six of the Segoe UI fonts are installed on my computer. Are any other Windows users having this problem with the 10.2.2.12 iTunes release?
Yeah it does, although the problem predates version 10.2.2.12. It's been around since earlier-on in the version 10s (at least).
It's usually Segoe UI font trouble on the Windows 7 systems too. Unfortunately, the Vortical troubleshooting technique only works on XP and Vista systems, so dealing with the issue on a Windows 7 system is trickier. (There's a bunch of different possible issues relating to the fonts that could be in play, and so the treatment tends to depend on which issue in particular you've got with the Segoe_UI fonts.)
For discussions of various Windows 7 variations of the "Missing text" thing, and possible treatments, see the following (unfortunately, rather long) topic:
iTunes 10.1 Missing Text

Please help - iTunes 10.6 does not launch after upgrade. I'm running itunes on windows XP

This happened to me with an earlier upgrade but I don't remember which files need to be deleted. Has anyone out there run into this?
Thanks

Refer steps here to delete SC file(s):
Win7/Vista http://support.apple.com/kb/TS2363
WinXP http://support.apple.com/kb/TS1776
Then proceed to repair your QuickTime. START > CONTROL PANEL
WinXP - Add n Remove Programs
Win7/Vista - Programs n Features
highlight QUICKTIME and click CHANGE then REPAIR.

After upgrade to Win 10 ENVY TouchSmart 15-j001tx Notebook PC display doesn't respond to touch

I just upgraded to Windows 10 from 8.1 and after I did, my touch screen doesn't respond or work. I basically have a non-touch display... ugh I've searched this forum and the hp support for possible drivers but don't see anything. I've even tried the Win 10 Drivers Update process with no success. Any suggestions?

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY TouchSmart 15-j001tx Notebook and the Touch display doesn't respond to touch after a Windows 10 update. If your computer is having problems finding and installing operating system updates, try using the Windows Update Troubleshooting tool to fix the problem. Here is a document that shows how to update drivers that are not working correctly with Windows 10. Here is a link to your driver page. I would try the section on Driver -Chipsets. Intel Management Engine Interface Driver should help. Restart the Notebook after the install. I hope something here helps you. Thanks.

VMware - I cannot logon to Windows 7 after upgrade to Yosemite

After upgrading to Yosemite, I cannot logon to Windows under VMware Fusion 7.0. It was working fine prior to the upgrade. The message I get when logging onto Window is,
"The User Profile Service service failed the logon.
The User profile cannot be loaded."
I'm running on a Mac Pro Mid 2010 and Yosemite itself is otherwise working fine. VMware was not running during the upgrade and re-start of the Mac. I'm stuck and need to get this resolved any help is appreciated.

I found the solution, I would have found it much earlier but just too tired and stressed from the week I guess
Anyway it is NOT a Yosemite or even VMware issue, it figures it's just a good old Windows issue that dates back to at least 2010, why am I not surprised. Probably as Windows was booting up and giving me the logon it was running anti-virus in the background and the user profile was corrupted, which means that Windows as usual was also not displaying a precise error message, just one that was close enough for Microsoft work.
The solution is easy especially if you can handle booting to Safe Mode and using Regedit, easier still if you have two user profiles in Windows even if one is just a duplicate of emergency uses, say like this. The details can be found here, http://support.microsoft.com/kb/947215
I was up and running within two minutes. Whew.

T440s freezes when plugged in to AC after upgrade to Windows 10

After upgrading to Windows 10 my T440s shows the following behaviour: It boots up fine with the AC adapter plugged in. Now if I unplug power it goes into battery mode, i.e. darker backlight etc just fine. Now plugging the power back in, the screen gets brighter but the UI freezes. The screen freezes and the mouse pointer doesn't move. It doesn't seem to completely lock up though because when I unplug the power again everything comes back to life again. I have installed the latest Windows 10 drivers I could find to no avail. Anybody have the same experience? Thanks, Carsten

I am happy to report that this is fixed after upgrading the Intel HD Graphics driver from Windows Update via Device Manager. Not sure why that hadn't shown up as available directly in Windows Update.

After upgrading from Mac 10.6 to 10.9, firefox creates new windows by an "expanding" animation instead of just appearing. How do I get the old behavior back?

On Mac 10.6.8, when I create a new window by hitting command-N or going to the file menu, or if another page creates a new window, the new window just appears instantaneously. However, after upgrading to Mac 10.9.2, new windows appear by an "expanding" animation, which takes slightly longer than the old "appearing" behavior. (Other apps on my Mac do not exhibit the "expanding" behavior, only firefox.)
Was this behavior intentional? How can I get the old behavior back?
I am using Firefox 28.0.

Hi __trout__,
Go to the mac system preferences and click on Doc. There is a Minimize window using.... select the animation there.
Hope this helps.

Graphics instability and crashing after upgrade from FF 32 to 33

Soon after upgrading from 32.0.3 to 33 (Windows 7), I was seeing occasional flicker-like split-second black flashes. (I *think* this was mostly when opening new pages, but I don't recall for sure...maybe also when scrolling). Then a few minutes later I was scrolling a page with my laptop touchpad and the screen flashed completely black, stayed that way for about a second, and then came back up with a Windows message that Intel Graphics had recovered from a crash. (Which is doubly interesting given that FF set to use my discrete NVIDIA graphics on this computer.). I haven't seen anything like this happen in the nine months I've had this laptop, with or without FF open. There was also a message that FF had crashed.
Then I restarted FF, and all was going OK, except that I believe I still saw a few split-second "in the blink of an eye" black screens as I opened new pages. But then I went to Google Maps, and was dragging a map upwards. But instead of the lower portion of the map moving into view, I only got a blank white screen. The further up I dragged the map, the more of the the screen that was blank white, until it was completely white. Then FF crashed again.
I thought the new FF native H.264 might be causing the issue so I disabled it and restarted FF. But then I went back to Google Maps, tried the same thing and had the same issue (but no associated crash, although I closed FF very soon after I saw the odd graphics behavior recurring so maybe I didn't give it enough "time to crash").
I re-installed 32.0.3 and all the issues went away. FWIW, I've had occasional crashes and slowdowns with 32 and other recent versions. (I could recover from the slowdowns just by restarting FF.) Most of those issues seemed to be associated with Adobe Flash. That behavior was an occasional annoyance but nothing of the magnitude of what happened when I tried FF 33. I don't know if this latter observation adds anything, but I just thought I'd throw it out there. Fyi, the laptop has 2.4 Ghz CPU (Intel i7) and 16GB memory.
Any ideas? Thanks.

Today when I noted that Lenovo still hadn't released an updated driver specifically for the Intel Graphics, I went back and installed a Lenovo NVIDIA Optimus update that I had tried 4 or 5 months ago but had subsequently reversed because it had created problems with Firefox. (Specifically, it was causing Firefox context menus to render slowly and incompletely.) Not only does the NVIDIA update no longer cause the FF context menu problem, it seems to have *solved* the problem I posted about here. It updated the NVIDIA driver ("GPU #2" above) from version 9.18.13.1269 to version 9.18.13.3302.
This makes some intuitive sense, since -- as I said above -- I have Optimus set to use the NVIDIA graphics with Firefox instead of Intel. (I had thought that, based on what I read in Lenovo support, the NVIDIA Optimus update might install a new Intel Graphics driver as well, but the Intel driver is still shown as the same version listed above (8.15.10.2725). (I don't know whether or not these driver numbers might be Lenovo-specific.)
Anyway, the NVIDIA Optimus update fixed my problem, so thanks for pointing me in the direction of graphics drivers. (I suppose there's also a small possibility that something had simply gone awry with my first update to FF 33, and that what really solved things was simply reinstallingl...)

Fafter upgrading to mavericks,I had problems with windows 8.1, so deleated partion to start over. Everthing went fine until The fact I was using an upgrade disc instead of a bootable version. Now everthing is loocked up and none of the hotkeys work

after upgrading to mavericks, I had problems with windows 8.1. I deleated the partition to start over. Upon try ing to reinstall 8.1 everthing locked up. I had an upgrade disk instead of bootable. Now every time I turn the computer on "it asks for bootable media"; none of the hot keys work to get back eo mac os

You mised the last part where none of the hotkeys are working,neither options nor "X" it goes ms 8.1 boot up and asks foe a bootable disc. I am about to pull the HD put it into a case attach it to another computer and delete the file

Sync issues after upgrading to ios 7

After upgrading to iOS 7 on my iPad 3 with no problem at all, I lost all my music. When I try and sync with iTunes 11.1 (on Windows 7) it hangs on the last step "waiting to apply changes", and the little sync icon on the iPad disappears. I can't even add or remove apps. Any solutions out there?
Thanks in advance.

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Impact on Precalc servers after upgrade...

Question on precalc servers impact after upgrade...Currently the config is Windows 2003, GUI 6.40 and 3.x Precalc Server and all our workbooks are on 3.x, although the backend is 7.0...We will be upgrading the GUI to 7.10/7.20, also upgrading from Windows 2003 to Windows 2007. We wanted to find out if there will be any issues after the upgrade with the 3.x workbooks? I looked for docs but could not get a clear understanding.
Please let me know if you need any additional information.
Thanks much,
Ann

Anybody?

Anyone else having volume icon on ipod touch 4gen just popping up and not working properly after upgrading to ios 6.1?

Hi, has anyone experienced issues with there volume control icon randomly popping up after upgrading to ios 6.1 from 6.0 .
I have a 4th gen ipod touch which until upgrading to 6.1 from 6.0 was working perfectly.
Minutes after the upgrade I noticed the volume icon just popping up for no reason. I can turn the volume up now, but not down and it randomly appears on screen without anyone touching it. Weird! Can someone shed some light on this issue,I have reset and reloaded to factory several times now to no avail.
thanks!

I am having this same issue on my iPhone 4. The most recent update to iOS 6.1 didn't fix it either. Has anyone found a fix for this problem? It doesn't happen often, maybe every third day or so but requires power off, power on to bring the sound back.

Lightroom sliders don't have color after upgrading OS X

After upgrading my Mac to OS X 10.9.3, the sliders in Lightroom3 have lost their gradient color and are now just white. Is there a known resolution to get the color sliders back?

bob bobkins wrote:
After upgrading my Mac to OS X 10.9.3, the sliders in Lightroom3 have lost their gradient color and are now just white. Is there a known resolution to get the color sliders back?
What Jao vdL said.
This issue is fixed in Lightroom 5.2 and later. All other versions up to and including Lightroom 5.1 will have white sliders in OS X Mavericks.

After upgrading my windows 8.1 PC to windows 10, my Acer T272HL 27" touchscreen lost touch functions

Similar Messages

Maybe you are looking for