After upgrading my WRT160N firmware, I cant access the router at all.!!

After upgrading I cant access the router at all.!!
I just upgraded the firmware to WRT160Nv2_v2.0.03.007_US_code.bin from a download.
I had the CD ver 2.00.2 build 8 on it originally. I upgraded because the router would have the DNS problems everyone is talking about both wireless and wired. I tried the all zeros 0.0.0.0 and that did not work.
Now that I upgraded, I cant get into the box at all. I dont get the log in screen. I have reset multiple times and power cycled through. The ip I am trying to get back in is 192.168.1.1
How can I get this box to respond?

Are you able to ping 192.168.1.1 from the wired computer...?
Unplug the modem from the router,hard-reset the router for 1 minute,power cycle the router...Make sure that the computer is connected to the router on the Ethernet port...Now,Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1......If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security software on the computer...
If you get 4 replies then,go to start>>>run>>>and type "//192.168.1.1" and hit enter..If you are able to open the linksys setup page then,connect the modem to the router on the internet port and configure the router as per the ISP settings.

Similar Messages

After upgrading my 5s to ios8, cant pass the activation step by apple id and the phone is useless

after upgrading my 5s to ios8, cant pass the activation step by apple id and the phone is useless

let me explain it by details;
the last night as soon as I saw the IOS 8 notification on my 5s phone, I started downloading and as soon as download finished I clicked on install. Then I saw a sign of cable and iTunes on the phone display.
I started downoalding the ios8 this tme on iTunes by my laptop and then tried to install it on the phone again. it installed and asked location and language which is set by me, then asked the apple id and password but it didn't accept the apple id and password until I thought I have forgotten the apple id. now I don remember the details of the apple id except the password and nothing more!
can u guide me or instruct wot should I do plz?

This morning I was able to access iTunes Store on my computer and iPod 5G - and now I cant access the store at all - something about my network connections - help? ive restarted rebooted

This morning I was able to access iTunes Store on my computer and iPod 5G - and now I cant access the store at all - something about my network connections - help? ive restarted rebooted

Thank you so much for replying. But resetting my apple I'd Password seems to have done the trick. I am able to download apps :). Got me worried I even uninstalled kaspersky 2012 :( got to reinstall back

I cant access the root share of a windows server after upgrading to mountain lion

Hi Guys,
Since upgrading to mountain lion i cant access the shared drives on our windows server. For example in a windows machine if i go to run the type \\server\ i get all the visible shares available. in my previous version i was able to do the same (obviously i would authenticate with my AD account). now when i try to access those same shares i get the message below:
"The operation cant be completed becuase the original item for "/" cant be found"
I can however connect to the shares directly for example if i connect to server path \\server\data it works ok.
I have verified my account details and they are ok - i have also disconnected and reconnected the connection.
This was working fine before the upgrade. can anyone help??

well iv just managed to get to 35 gig free (just deleting iphone backups) and im now able to get past the next screen on bootcamp.
unfortunatly its only allowing me to create a new partition not delete the current.
this is leading me to think the old ones master partition has become damaged and the hard drive dosent know it exists any more.
if this is the case (please tell me im wrong though) what options do i have as i dont want to / have the money to buy another hard drive to back everything up to it with.
thanks again
gareth

After upgrading to the latest version of firefox. I can no longer access the internet and all traces of Mozilla Firefox are gone from my computer. I have no access to the internet, my home page or my e mails. What can be done??

I have been using firefox for years. I downloaded the latest version and at the conclusion of the down load I was refussed access to the internet. Something about Proxy???? I checked my firewalls and security and they said that mozilla was allowed but everytime I attempt to gain access I am refused. I cant access the internet and I cant download another program to access the internet. I uninstalled Firefox and attempted to reinstall but after uninstalling Firefox I have no means to reinstall because there are no traces of it on my computer and I no longer have access to the internet. What do I do? I cant access my e mails, stored messages, favorites etc etc.

No. After I select "Choose" the dialog box expands to provide only three choices. This is a new bug. I have only seen it in the past week or so, but it is maddening. I have observed that, while the Mozilla Foundation focuses on trivialities like which search engine should be the default, the Firefox application becomes buggier and buggier. Most of my family has switched to Chrome, and I will be following shortly. Firefox used to be a great program. Not any more. Getting assistance with a problem has also become very difficult.

After upgrading to ios 6.1, I experienced the following problem: I am no longer able to read the magazine I subscribed (The New Yorker) if I don't have access to internet. If the iPad is on FlightMode I can't read the magazine or the books in iBooks

After upgrading to ios 6.1, I experienced the following problem: I am no longer able to read the magazine I subscribed (The New Yorker) if I don't have access to internet. If the iPad is on FlightMode I can't read the magazine or the books in iBooks. Can you help me?

I am having the same problem. I have a 2nd generation ipad wi-fi only. All was working great until I upgraded. NONE of my downloaded magazines or rss-feeds are accessible. For the magazines, their icons show up on the "shelves" but once you click on one it wont even take you to the "issues" i have downloaded. it jumps back to the shelf page.

Hi, after upgrading to 5.1 I cant use my ethernet cable any more

Hi, after upgrading to 5.1 I cant use my ethernet cable any more for air play or photostream. If I use Wifi instead it works!. Seems like a bug in 5.1. Anyone with similar issue?

FIxed my problem!
Go to System preferences
Go to Ethernet
Go to Advance
Go to Hardware
The just make the changes like in the pictures below
it work for me

After upgrade to latest firmware canon network printer won't print

after upgrade to latest firmware canon network printer won't print. It's a canon MP540 on a wireless network. It will print a test page but won't print from any application, just sits there with the message 'copying print data'!
Running Mac OS X Lion 10.7.2 (11C74), with firmware SMC Version (system): 1.73f63.
Any help gratefully received.

First off if you can print a test page there is absolutely no reason you wouldn't be able to print from a application...none. But stranger things have happened now that we have Lion. Within the application are you selecting the wireless printer........just had to check.
I have the MP620 which is simlar to your MP540 and have no problems printing from my MBA (June 2011). I too have the latest firmware and software......without problems printing.
A few things I'd try would be to remove the wireless printer from your computer (in Preferences, printers), restart, and repair permissions. Then add the wireless printer back, and see if it works. If not.....power OFF the printer and turn back on.
If the above fails reinstall the printer driver (yours) I think you will have to plug in the USB cable.
Keep me updated and I'll tyr and help!

After upgrading my iphone firmware i'm unable to activate via wifi and is not able to recognise my sim card

after upgrading my iphone firmware i'm unable to activate via wifi and is not able to recognise my sim card

Try a reset: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

I have a macbook and after i've done the upgrade to lion os i cant eject the cd from the tray! any suggestions???

I have a macbook and after i've done the upgrade to lion os i cant eject the cd from the tray! any suggestions???

Restart the computer (e.g. via the Apple menu). At the point you hear the startup chime (or sooner), hold down the trackpad or mouse button, and keep holding it down until after the point the Apple logo appears during startup.
The CD should be ejected by the time the Apple logo appears.

After upgrading my i tuns i cant open says quick time needs to be 7.5.5 or more wth

after upgrading my i tuns i cant open says quick time needs to be 7.5.5 or more wth

Hello amyluvscarolyn
Depending on what version of Mac OS X you are running, you may have a newer version. If you are needing QuickTime 7, then check out the article below for the correct links to download for your system.
Installing QuickTime Player 7
http://support.apple.com/kb/HT3678
Regards,
-Norm G.

After upgrading my iphone 5 to IOS 7, the iTunes Store won't open. Is there a fix for this?

After upgrading my iphone 5 to IOS 7, the iTunes Store won't open. Is there a fix for this?

I had the same thing yesterday. After google gave me nothing and after I was sure my phone had enough charge to restart, I did a reset on my phone...
Holding down the Power button, volume button and selector button on the front - for about 30 secs (or untill I knew the beeping had stopped).
I cant remember if I then restarted it or it it restarted itself, but now its back to normal! No memory loss from the phone either.
Freeked me out as its a new iphone 4s but glad to have it back! Without having to take it to get fixed by a pro.
Hope that helps

I have disabled my 4s.. when i connect to i tunes to restore it says its not a trusted computer and waiting for code... i cant access the phone to get the code.. what do i do

how can i fix my phone its a 4s.. disabled.. when i connect to i tunes to restore it wont allow me as it is not a trusted computer. obviously i cant access the phone to allow trust, it picks it up as my own phone but wont restore... please help!!!

Hello feeling dumb
You will need to put your iPhone into recovery mode by following the steps highlighted below.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Regards,
-Norm G.

I cant access the istore on version 10.5.x. How do I get this going??

I've upgraded my itunes to version 10.5.x and now I cant access the istore.
How do i get this resolved??

Choose About this Mac from the Apple menu and check the processor.
If it's a G4 or G5, buy a retail Mac OS X 10.5 DVD from a source such as Amazon or eBay; Apple still might have copies in stock if you phone them.
If it's an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store, install it, and run Software Update. If your Mac is compatible, you can then upgrade to 10.7 or 10.8; Mac OS X 10.7 requires a Core 2 Duo or better CPU.
(80984)

5800 applications cant access the net..

in my 5800, opera mini is working fine, but no other application cant access the internet..looking forward for a solution.
Solved!
Go to Solution.

Hi turtlebuster,
Welcome to Nokia Support Discussions!
Can you further elaborate on your concern? Which internet connection are you using? Have you tried using a WLAN connection to access the internet? Is there any error message? Can you access the internet using the phone browser? Can you name some of the applications you have on the phone?
We can try some basic troubleshooting steps to isolate the issue:
1. Clear your phone browser's cache. Refer to the manual for the instructions: http://nds1.nokia.com/phones/files/guides/Nokia_5800_XpressMusic_UG_en.pdf
2. Under settings, check your default access point. Make sure that you are using this access point for the other applications you are using.
3. In your phone browser, you can set the access point to "Always ask". This will enable you to choose which connection to use when using the phone browser:
Internet> three lines> Settings> General> Access Point> Always Ask.
If the above steps did not work, you can follow these steps:
1. Perform a power cycle on the phone. Turn off the phone and remove the battery for a few seconds. Place the battery back and turn on the phone.
2. You can factory reset the phone. This will not delete any personal data but it will restore the phone's default settings.
Settings>Phone>Phone mgmt>Factory settings
The default code is 12345 unless otherwise changed. After the factory reset, you can customize your settings on the phone. For internet settings, you can check with the operator.
3. Check for updates using the Nokia Suite. If none, you can try to reinstall the phone software. For video tutorials, check www.nokia.com/nokiasuite
4. If there is no progress, you can reformat the phone. This will wipe all data, thus make sure to have a backup file first to prevent data loss. You can create a backup file through Nokia Suite. To format the phone, dial *#7370# on the dialer.
Hope this helps.

After upgrading my WRT160N firmware, I cant access the router at all.!!

Similar Messages

Maybe you are looking for