After upgrading to 10.5.4, CPU keeps maxing out and system runs slower

Hi there,
I upgraded to 10.5.4 last week and quite frequently my CPU starts revving up and stays at a high level until I put my iMac to sleep. When I did my weekly reboot last Friday it seemed to not have the problem for a while, but then it came back again pretty quick. By checking Activity Monitor I found out that my resources are maxed out all the time, I've got about 80% CPU attached to Safari right now. Applications seem to load slower, everything runs a bit slower when it's like this.
I found under System Preferences > Energy Saver that I had my Processor Performance set to Highest, so I switched that to Automatic, but I'm still having this problem.
Can anyone help me with this?
Travis

Thank you, Pondini, that's all I was really asking about in the 3 (4) previous messages. I wanted to know if I could download the combo updater and install it over top of the 10.5.4 version I downloaded through Software Update. Thanks for the confirmation. I did download it this morning after getting your post and have installed it.
Initially, after installation and reboot of the combo update 10.5.4, my CPU maxed out again for a little while, and I checked Activity Monitor and it said a program called "Pattern ?" was hogging the CPU, the ? refers to a second word that I didn't write down at the time, I think it started with the letter M.
I had my iMac turned off for a couple hours after that. When I turned it back on, I was ripping 4 CD's into iTunes and so it sounded like the CPU was running high again through that, but I think that's typical for when I'm ripping a CD. Anyhow, right now the CPU is running normal, about 20% of total cycles used and that Pattern ? whatever program has disappeared from the list. So maybe that was something that the Combo Updater 10.5.4 was using to fix a problem and it might be back to normal again.
So, so far so good, thanks to the people here who have helped. I will post again if the problem persists.
Also, Pondini, thanks for reminding me to check posts in the forum for information. I almost always do that initially, before I post my question. I did that this time, but I had no idea at the time that downloading the combo updater would be the solution as I was scanning the forum for people who had spiking CPU's, not any other type of problem. I suppose in hindsight, after finding that combo updater might be a possible solution to my problem I should have ended this thread and sought new information, posed a new question / post if necessary. But like you say, I would have found other posts about installing combo updater.
Travis

Similar Messages

  • Compaq laptop presario V5000. CPU keeps maxing out and freezing up

    The CPU keeps spiking and maxing out, thus the computer freezes up until the CPU drops back down. This is all visible from the windows task manager @ the performance setting.  The CPU keeps repeating this up and down cycle zero to max.
    This question was solved.
    View Solution.

    2040637 wrote:
    It says process 44.  What do I do next to correct the problem.
    Hi,
    It shuld have a name, just look at the CPU col, which "Image Name" uses CPU ?
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I'm running mainstage on my new macbook pro, and the CPU keeps maxing out. WHY????

    SO, new macbook pro, and logic runs like a dream, 10 instruments, 20 tracks, all is well...
    However, mainstage is killing me. I can see the amazing potential, but the CPU keeps spiking, literally when I try to loopback 1 instrument. It is ridiculous. I'm verging on submitting to Ableton, help me please!
    Robin

    Did you check the I/O buffer size in Preferences/Audio? It can well be, that small buffers like 32 frames may screw the show. Which instruments are you using? MS in single threaded, so everything is processed on a single core.
    Best,
    DaCaptain

  • I had a MobileMe account before... after upgrading to iOS 5, should I keep my account info under iCloud (settings) AND under mail, contacts and calendars (in Settings as well) or only keep the info under the new iCloud setting section?

    I had a MobileMe account before... after upgrading to iOS 5, should I keep my account info under iCloud (settings) AND under mail, contacts and calendars (in Settings as well) or only keep the info under the new iCloud setting section?

    That's not the correct port. It should be 993 for incoming.
    If you signed into iCloud from the System Preferences, it should automatically create the iCloud account for you in Mail. Sounds like it is an account you already had set up for MMe in Mail.
    Open Mail preferences, open the Accounts tab, disable that account in the advanced pane.
    Open Sys Prefs, open the iCloud tab, and sign out of iCloud. Then sign back in and see if a new iCloud account is automatically created.

  • After upgrading to OS X Yosemite, I keep getting popups asking for my "Local Items" keychain for cloudd, calendar, messenger and on and on...and then it wants me to change my password, only won't accept it when I do.

    After upgrading to OS X Yosemite, I keep getting popups asking for my "Local Items" keychain for cloudd, calendar, messenger and on and on...and then it wants me to change my password, only won't accept it when I do.

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried, testing after each one, until it's resolved. Back up all data before making any changes.
    Step 1
    Follow the directions in this support article.
    Step 2
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Select the iCloud keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password.
    Select
              Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain.
    Step 3
    Open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.
    Step 4
    Open the Keychains folder as in Step 1. There should be a file in that folder with the name "login.keychain". If there is also a file iwith the name "login_renamed_1.keychain", then please do as follows:
    ☞ Rename login.keychain to "login-old.keychain".
    ☞ Rename login_renamed_1.keychain to "login.keychain".
    You can then close the folder. 
    Delete the login keychain from the keychain list in Keychain Access. Choose
               Delete References
    when prompted, not Delete References & Files.
    Select
              File ▹ Add Keychain...
    from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file now named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred. 
    Run Keychain First Aid again. Quit Keychain Access.

  • After upgrading to IOS 7 my iPad keeps restarting - it is now unusable.

    After upgrading to IOS 7 my iPad keeps restarting. I mostly use my iPad as an eBook reader and all I am trying to do is read a pdf in iBooks. I get about halfway down the page and the iPad screen goes black and I get the restart apple logo.
    I have tried restoring the iPad back to factory settings and restoring my conent but issue keeps happening. My iPad has 57Gb capacity and 5Gb free space.
    I need to get this fixed quickly as I rely on access to my pdf documents for work.

    After upgrading to 7.1.2 (my Ipad had about 40% battery life left) my Ipad would constantly reboot.
    I restored the Ipad back to factory setting and restored from back-up.
    When this was done, much to my dismay, it still continued to reboot every 10-30 seconds.
    I was pretty PO'd, so I plugged the Ipad into the wall and went to bed.
    Next morning, the battery was fully charged and the Ipad no longer was rebooting !!!!
    The only problem was that most of my APPs were grayed-out.  So, I deleted each of the apps and reinstall them.
    The Ipad is working great ... I can't explain it !!!!  (only thing I can think of...I should have started to update with a full battery and/or with the charger plugged-in !

  • After upgrading to Lion my videos have a codec error and won't play

    After upgrading to Lion my videos have a codec error and won't play

    Hi waiex,
    I have recently upgraded to Lion and have the same problem as you.  Did you find a solution?
    Thanks in advance.

  • After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector

    After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector

    I'm happy to say that I solved the problem, and for the community (for the "next generation" that will search a solution for this problem) - I will publish the solution for this problem : I defined as new iphone, and then the restore showed up!
    All wishes everyone...

  • I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect.  My Safari keeps kicking out and giving me error message after error message and my computer is really slow.   How do I resolve?   Can I uninstall this ?

    I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect.  My Safari keeps kicking out and giving me error message after error message and my computer is really slow.   How do I resolve?   Can I uninstall this ?   I had to re-connect my iMovie t

    USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
    OWC have a few different ones for sale.
    http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
    Do you also connect the external USB drive to the AC power as well while you use it ?
    Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
    Stewie
    Message was edited by: stewiesno1

  • After upgrading to iOS7, all 'albums' in 'music' are shuffled and I cannot undo.  Anyone have this also?

    After upgrading to iOS7, all 'albums' in 'music' are shuffled and I cannot undo.  Anyone else have this also?

    After doing some more searching, I've discovered the problem, and it is all mine, I'm embarrassed to say. 
    When I adjusted the apps to a larger size, iOS7 only allows 9 apps per page per folder.  If I have more apps, iOS7 just adds more pages within the folder.  So the apps I missed were there all along, just on another page.
    I apologize for any confusion, and thank you for taking an interest in helping me solve it.

  • TS4429 after upgrading to IOS8 my iPhone5 doesn't make calls and doesn't eceive calls

    after upgrading to IOS8 my iPhone5 doesn't make calls and doesn't receive calls

    Hey ckampff,
    If you are having an issue with being unable to send or receive phone calls on your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    If you can't make or receive calls on your iPhone - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • HT201412 After upgrading my iPhone 4S to IOS 8, Opendoor App doesn't run. I have deleted and downloaded the app several time, but the problem still exists

    After upgrading my iPhone 4S to IOS 8, Opendoor App doesn't run. I have deleted and downloaded the app several times, but the problem still exists

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Contact the developer/go to there support site
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • I have a macbook pro 4,1 early 2008 model running on 10.6.8 snow leopard was wondering if upgrading to moutain lion will make my system run slow?

    MBP 4,1 running 10.6.8 snowleopard and it runs great but i was wondering if upgrading to moutain lion will make run slower?

    Lion is still available but you have to Call Apple to order it and then they send you a Redemtion Code to your Apple ID Email address that you use on the Mac App Store to download it.
    But in all honesty even Lion is going to make your system run slower then it now does. Lion, like Mt Lion, uses more system resources then Snow Leopard. I can see the difference on my 2011 MBP with 8GBs of RAM and a fairly fast hard drive. Snow Leopard boots and runs faster then Lion and more so then Mt Lion.
    What you need is a New or Newer MBP. If that is not an option then the only thing I can say is give Lion a try. That is AFTER you do a complete Time Machine Backup of your current Snow Leopard install just in case you need to go back.
    By the way Apple replaced the Logic board in your system with the same Faulty NVidia chip install in it. Apple Never Updated the NVidia chip used on those logic boards. So odds are sometime in the future, Near or Far, that board will fail again.

  • HT1689 i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

    i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

    It sounds like it still has her information on it, so it might be efficient to navigate to Settings, then General, then Reset, then Erase All Content and Settings. You can then set up the phone again, using your information. This way the phone will be yours, officially, and her data and information will be removed.

  • Hi there can anyone help. I am connected to the internet by ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no internet connection. the other wireless laptop in my flat works well.

    Hi there can anyone help. I am connected to the Internet by Ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no Internet connection. the other wireless laptop in my flat works well. Could the other wireless laptops being used in my flat be affecting my connection. what can I do to get connected, keep connected. Thanks for any ideas out there.

    My network connected for a few hours then went back to timing out. I have not changed anything. However there four additional laptop users in my family who do not seem to be having any problems using their wireless connection. Could their film and music downloads be causing the timing out of my connection and if so is there a way I could prioritizes my computer or limit their use?

Maybe you are looking for

  • Master-detail: detail field not displayed after changed by master field

    I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the

  • "Save as text" problem in Reader 9.4.5

    Hello! I'm trying to save a PDF as text in Reader 9.4.5 under windows and I've run into a formatting problem. Line wrapping within a paragraph seems to be broken, as soft returns are not being converted to spaces. The last word in each line runs into

  • How to include two different tables in view concept..

    I have to make the innerjoin between these two tables.. i.e, BUT000-PARTNER = PA0002-PERNR.. here PARTNER is CHAR(10) and PERNR is NUMC(8)..in this i had two probs..one is how to convert this PERNR into CHAR(10) and second is how to match those field

  • How do you submit a podcast to iTunes? The instruction page is outdated

    I spent 8 hours today trying to figure out how to submit my podcast to iTunes. The PODCASTING AND ITUNES: TECHNICAL SPECIFICATION page has outdated information. For instance where it says under TESTING YOUR FEED to select "Subscribe to Podcast" in th

  • Schlechte Qualität bei Ausgabe von DVD und Bluray in Encore CS6

    Guten Tag Ich muss für ein Schulprojekt dringend eine DVD UND eine Bluray brennen. Wie bekomme ich hier nun die beste Qualität hin? Der Film ist praktisch fertig, doch beim Ausgeben des Films via Dynamik Link in Encore, kommt eine miserable Qualität