After Upgrading to 10.6.8 my aperture app starts but hangs trying to read the Lib. I removed the old lib and start with new. but still have the problem. 10.6.8 also made my Shark FX7 do the same thing. Any Ideas? Thanks
After Upgrading to 10.6.8 my aperture app starts but hangs trying to read the Lib. I removed the old lib and start with new. but still have the problem. 10.6.8 also made my Shark FX7 do the same thing. Any Ideas? Thanks
Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Similar Messages
-
Because the sync error is on every single device, and all 3 are running different versions of an OS, I assume this has to do with the new Mountain Lion upgrade. I probably should have waited for 10.8.3! Any suggestions would be greatly appreciated!
A bit more info for those of you reading this.... the problem seemed to be in iTunes. For each connected device , if I clicked on the Photo option I could no longer select the second radio button for limiting the photos by Events, Albums, etc. It was an all or nothing deal. But selecting all would cause the error.
So I had read the other forum posts about the "&" symbol being the cause of the problem. I went through iPhoto and made all of the changes. It did not work. I then looked at iTunes, using the AlbumData2.xml file listed in the other forums as a reference. I found one album with the "&". I edited that one. Still would not work. So then I spent 3 hours on the phone with AppleCare last week. I talked with 4 different advisors. None of them had heard about the "&" error from the forums. We tried everything in iPhoto including repair and rebuild. Finally we created a whole new library and reimported my master photos from my original one. Using this option would allow me to now check off that radio button in iTunes. BUT... I now lost all of my albums and events and would need to rebuid them. I was not happy. They agreed and we set up time to talk this week.
So today I talked with AppleCare again. They now have more info and said the problem has to do with iTunes and the new iPhoto 9.4. It does not like the "&" symbol anywhere in either iPhoto or iTunes. So they now have me going through everything in my iTunes library. Genre is OK but any other item cannot have " & ". I have several dozen to edit and will do it over the weekend and then restore my original iPhoto Library and see if I can finally get it all to sync. I will let you know how I make out, but apparently you need to eliminate " & " from every entry in iTunes and iPhoto.
Quality control is not up to par with Apple these days. -
After upgrading to mavericks, i cannot open mac app store, preview, calendar, etc
Why i cannot open mac app store, preview, calendar, software update, etc after upgrading to mavericks? How can i fix this? please help me
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen, what can I do to correct this problem?
Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device? -
After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?
If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install. -
Hi. I just got the iPhone 6, plugged into itunes and made the mistake of putting an OLD back up on my new phone resulting in losing all contacts after 2013. They are not saved on the cloud. Is there any way to go back to before I screwed up?
If you have performed a sync with the device since you restored this old backup, then don't bother looking for another backup. iTunes writes over the last backup each time you sync. If you were handling contacts in iCloud, you would find them by logging into iCloud. Or you can check settings and iCloud and see if the button it on for Contacts. Otherwise it might have been on the computer, if you had a program that syncs with iTunes and handles contacts, depending on the computer system you use. If Windows, it would be Windows Contacts or Outlook. If a Mac, there is a Mac Address book as well.
-
After upgrade to iOS 6, one of my apps won't load. It seems to, then just ends. Is there an error log I can check?
so your starting it up and its just crashing right away, yes? can you tell me what app it acutally is? as iOS6 is so new my thought would be that its probably incompatable with it at this time, im having trouble with my networks app that just will not let me log in at all!
id suggest going to the page of the app on the app store and look to see if it says if its compatable or not? as for a error log its in usage data, which is in settings > general > about, and i think its near the bottom. -
Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
Thank you for all of your answer.I've seen it mentioned on here that a PRAM reset may solve it:
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
After upgrading to OS 10.8, my Mac App Store is not working. It says: Cannot Connect To The App Store. Kindly Help
Also having that problem - I checked and I am connected to internet (can access other websites or other pages in Apple's website), can login from Snow Leopard (10.6.8) with Mac App Store there, but if I use the (external) drive with ML to start up, no go.
I can get to the "Featured"/initial MAS page, and tried going to the login from there, but same problem as Mitoshacer.
In my case, MacBook Pro (2.66GHz, 8GB RAM, 500GB external with ML - vs. 320GB internal drive with 10.6.8), March/April 2009 model. Have done searches for the problem online, but nothing shows up (except some for older OS X versions). -
I can't update the purchases I made with the old Apple I.D;
how can I sync my old Apple I.D. with new one?Only the Apple ID used to buy an app can update an app. Apple does not merge Apple IDs and Apple does not transfer content biught with one ID to another ID.
-
I had made a copy of the main revel file on my mac, and then i put it in my google drive folder for safety. I accidentally deleted one of the two libraries form my iPhone. I opened it up and panicked and thankfully I guess I had a backup of the other library in my spouses phone... but mine is still gone. I don't have them saved to my computer... the pictures are important and I really really need them back. Is there a way for me to get the pictures back from what I believed at the time was a smart way to backup when i made a duplicate of that main mac file to my google drive? The best way to let me know is my email... [email protected] I am really relying on you guys if there is a way?
Hi meghage,
From your code, it is a WebForm project.
This forum is to discuss problems of Windows Forms. Your question is not related to the topic of this forum.
You can consider posting it in asp.net forum for supports . Thanks.
ASP.NET: http://forums.asp.net
Regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?
I'm having a very similar problem.
I'm based in the U.K. and am trying to publish an iBook through the iTunes bookstore. I have made my book in iBooks author 2.0. My iTunes is up to date.
When I try and publish the iBook I have passed and ticked the Pre Publish Check; and the Create Account, but when I try and download iTunes Producer through iTunes Connect I'm told "Your Apple ID does not have permission to access iTunes Content."
When I try and re-set my iTunes Store account I'm told "The iTunes Store Account has already applied to distribute content on the iBookstore." Of course it has I just did that.
If I try and sign in to iTunes Connect through the Publishing pane I'm told "Your ID or Password was entered incorrectly." Even though I've just used it to sign into iTunes (and here), so my password and Apple ID work fine elsewhere.
Is my access to the iTunes Connect being delayed while my submission is processed, i.e. the processing of my tax and account details? Or am I stuck in a loop?
If this is still processing (I started this 20 hours ago) I assume that I have to submit the book itself when I can download iTunes Producer at a later date, as I haven't submitted the book yet?
I emailed the problem to iTunes Store and was refered to [email protected], only for them to say they don't read or reply to emails sent to that address??????
I'm not sure which part of the process I've reached - if any. I feel I'm in limbo. I have an iBook ready to go - but where is Apple?
Any help would be most welcome.
Andy -
After shop did migration, from Pro to new Pro my whole file structure is lost. Everything is in Destop folder, inc all music. Any ideas. tia.
Bring it back to the shop.
-
I did an auto-update on itunes today and now itunes is unresponsive..it gives this error "An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
Wouldn't apple check before releasing new version, I see so many people with same issue..its such a waste of time for everyone now to fix it.
Is there any other way to fix before I try to un-install everything and re-install back?Hello iTunes_Bad_Update,
The following article provides information and troubleshooting steps that can help get iTunes back up and running.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen -
When we tried to open firefox 4, all previous settings and bookmarks were gone. Firefox 4 gives message that it is not supported by our system. IMAC G5 power PC with 2 gigs of Ram. Is there any way to restore the old firefox?
Hi everyone,
Many of you have had problems with Spotify for Mac OS X 10.5. We no longer support Spotify on this operating system which we announced back in November here as a "heads up".
However, we've noticed that many folks have been updating regardless which should not be the case. Our intention was to let anyone using Mac OS X10.5 continue using a "legacy" version of Spotify. In any case, the folks who were using 10.5 were updated, and in many cases these customers have experienced crashes with the newest version of the application (Spotify version 0.8.8. at the time of writing).
To make a long story short, we messed up in updating folks who should not have been updated and we're sorry. We plan on fixing the problem of Spotify updating to the latest version for Mac OSX 10.5 users and we're working on it as I write this. If you're a person who has already upgraded and the application is crashing, we're looking into a solution and we hope to have an update shortly.
Warm regards from your humble community manager,
Rorey
Maybe you are looking for
-
GRC AC 10.0 Mass risk analysis vs. Role level analysis
Hello GRC experts, I urgently need your advice on the issue with deactivated permission objects which are identified as risks in the mass role analysis. For example, in one role we have deactivated the permission object: S_ARCHIVE, and there are No
-
When I use the new Oracle Data Provider for .Net ver 9.2.0.4 I get the following web error: "The located assembly's manifest definition with name 'Oracle.DataAccess' does not match the assembly reference." The Oracle.DataAccess reference is displayed
-
How to Implement MD47 report in BI
Dear Experts, We have a requirement from users to bring the report "Evaluation of Product Group Planning" (tcode: MD47) to BI. However, we are not sure whether there is standard BI Content supporting this report or not. If not, how to implement t
-
2 days ago when I turned my computer on and plugged in my iphone, I got a strange error message and itunes completely shut down. When it restarted, I had lost ALL of my playlists. My songs are still there, but the recently played, 90's, etc. are all
-
We have OCS 10.1.2 on Red Hat Enterprise Linux 3 AS. It is a single-box installation with the default configuration. After logging on to the Collaboration Suite Portal, on accessing the link to the Provisioning Console (oiddas), the Home page of self