After upgrading to 10.7.4 my iMac cannot find my remote external harddrive. any ideas?

i upgraded to osx 10.7.4 today and now my iMac cant find the HD i have connected to my airport. anyone having the same issue?

Yes, me - will wait and see if it resolves itself in next cople of days.  Most annoying.

Similar Messages

  • Hello,  After upgrading my OS to Mavericks my iMac crashes when I log in.  Any suggestions?

    Need some advice,  after downloading Mavericks, my iMac crashes upon logging in... When I log back in it says that I turned off my computer due to a problem.  I cant get any other info on my Mac as I can't log back in, but Its a 2011, 21 inch, iMac.  Any suggestions???

    Try to narrow it down even further. Disconnect everything, including the keyboard, and add things back one at a time, keyboard last.
    The built-in hubs of keyboards have been known to be wonky. It is possible that for some reason it (or another peripheral device) is drawing too much power.

  • After upgrading my RAM to 8GB, the spinning gear freezes during start up. Any ideas to why?

    I made sure it was compatible RAM and I followed proper instruction of installation. Has anyone experienced this before?  My MacBook Pro is a mid 2010 model

    Thanks for the reply, Clinton! So I've attempted AHT's in the past, always getting a message that the test isn't available on my Mac.
    Oddly enough I reseated my old ram and it started up.
    That's just weird because the RAM I purchased is 1066 DDR3 and is even packaged with compatible with Mac stickers. Would you by chance know if PNY is a good brand for RAM?

  • After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl.  Restart gets back to normal, then 40 minutes later need to restart again.  Thought about reinstalling Lion through Lion Recovery, but says my hard disk is locked?

    After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl.  Restart gets back to normal, then 40 minutes later need to restart again.  Thought about reinstalling Lion through Lion Recovery, but won't let me, says my hard disk is locked?  Any suggestions?

    Launch the Terminal app in /Utilities/, run these two commands (copy & paste each one separately and hit the return key):
    sudo chflags 0 /volumes/*
    sudo chmod a+rx /volumes/*
    at the Password: prompt, type in your admin password, carefully since nothing displays on the screen, and hit the return key. These should unlock your drives. You might have to restart.

  • IPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?

    Had to upgrade according to screen.  iPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?
    I have restarted the computer. Brand new iMac intel. v 10.9.4

    You need to upgrade iPhoto for Mavericks. Download the upgrade using App Store.

  • Reinstalled Adobe Acrobat XI Pro after upgrading to windows 8.1 and now cannot scan

    Reinstalled Adobe Acrobat XI Pro after upgrading to windows 8.1 and now cannot scan through Adobe, although Scanner says its combatible with Windows 8. Cannot reinstall drivers because Brother claims they're built-in. Help!

    1. Re: Reinstalled Adobe Acrobat XI Pro after upgrading to windows 8.1 and now cannot scan
    Anubha Goel
    I am using a Brother MFC 8460N and on Brother's site it says its compatible with win 8.1 and that the driver is already installed. When I try to scan I am told there is no preset (there was with win 7 though) and I have to "custom scan." When I try that, I hear a sound as if the printer is trying to scan, but the feeder can't pull the paper through. I then get a blank .pdf as my scan. Thanks for your advice. I will try that.

  • I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

    After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this? 

    If you have this product,
    http://www.symantec.com/business/support/index?page=content&id=TECH165159
    you have to go back to Snow Leopard.
    To re-install SL, back up your home directory, format and re-install.

  • After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2.  After clicking the download button, the screen just turns dark and is frozen.  Any idea what is happening?

    After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2.  After clicking the download button, the screen just turns dark and is frozen.  Any idea what is happening?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • After install of Mavericks, it looks like my system kernal panics and just sits there. I tried waiting over two nights. Tried reinstalling twice, booting r/s. Recovery partition now has Mavericks as OS. Im running a iMac i3 27 inch circa 2011. Any ideas?

    After install of Mavericks, it looks like my system kernal panics and just sits there. I tried waiting over two nights. Tried reinstalling twice, booting ro the repair partition and repairs permissions/drive/verify , with no problems. Tried reseting PVRAM(or whateverit called). Recovery partition now has Mavericks as OS. Im running a iMac i3 27 inch circa 2011. Any ideas? Can still bootcamp into windows.
    Thank you

    bhadotia wrote:Anyway's the file downloaded from dell to update the partition for Studio 1555 is corrupted (checksums don't match). My partition still doesn't boot. I'm working to fix this and will update my post when I'm done.
    The file seems to create the CD/DVD/Image and USB just fine. So I used this only to create a CD image which I then wrote on a blank CD which seems to work fine. Also, I played around a bit and had some partial success in booting the partition. I've updated my original opening post with the new findings.
    Whew!! what a waste of time! Never want to do all of this again .
    Last edited by bhadotia (2012-03-03 00:05:22)

  • After upgrade to 4.3.3, my Ipad cannot turn on . Why?

    After upgrade to 4.3.3, my Ipad cannot turn on . Why?

    Not sure why it will not turn on but you could try to reset it and see if that works.
    Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears - ignore the red slider - let go of the buttons.

  • My Creative SBS250 speakers no londer work after upgrading to Snow leopard.  Where can I find the driverinstalling

    My Creative SBS250 speakers no longer work after upgrading to Snow Leopard.  Where can I find the driver?  Thanks

    Everyone in my household who has upgraded to Snow Leopard has had the same problems with program crashes and the computer "forgetting" registration codes.
    In fact, after re-entering codes, and then upgrading to 10.6.1, we had to re-enter them again because it forgot (again) that we had bought/registered the software. It was a lot of fun digging through old emails and such looking for the codes, let me tell you.
    I'm pulling a Vista and downgrading my computer back to 10.5.x. That was stable and remembered my software, at least.

  • Recently "lost" a purchased song, (Plus the accompanying artwork) from my i-tunes library, after upgrading my O.S. from windows XP to windows 7.  Is there any way to get the original song back, or, at least, re-purchase it?... I tried t

    recently "lost" a purchased song, (Plus the accompanying artwork) from my i-tunes library, after upgrading my O.S. from windows XP to windows 7.
    Is there any way to get the original song back, or, at least, re-purchase it?... I tried to do the latter, (It's still available in the itunes store) but, when I clicked on the buy link, I was informed that I had already bought it and was only given the option to, either, copy the link or send it to Facebook/Twitter
    I also, inadvertently, deleted a couple of default playlists (Notably recently added) while attempting to get the song back.
    Can someone out there, please, help me out. with the solution(s). (preferably step by step if possible, as I'm a bit of a Homer Simpson when it comes to this sort of thing) .. Doh!! :-(

    Hello, MrKite549. 
    Here is an article that will walk you through download any past purchases that are missing from your iTunes library. 
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    Cheers,
    Jason H. 

  • After upgrading iphone 5 to iOS 7, I cannot install new apps

    After upgrading iphone 5 to iOS 7, I cannot install new apps.  I get the message that I must first read and agree to iTunes terms and conditions.  I read the terms and conditions online, but I don't see a way to agree when I install or re-install iTunes 11.1.  I can update existing apps ok, though. 
    Anyone have this problem and find solution?

    Delete & ReInstall the App Store...

  • My iPhone 4 can not reboot after upgrading to iOS 6; keeps trying and cannot shut off either.

    My iPhone 4 can not reboot after upgrading to iOS 6; keeps trying and cannot shut off either.

    I FINALLY got it to work on BOTH iPhone 4 and iPpad 3.  Here is what I had to do:
    Had to DELETE all e-mail accounts including icloud.
    Did a hard reset (hold down button on top right corner and round button on bottom center)
    Then once it came back on, the iPhone had ALL of the accounts still on it and it was receivng e-mail.
    The iPad receive e-mail until I did the steps above 5 times.  Plus, I had to add back all of the e-mail accounts vs. on the iPhone 4 they were there when my phone came on.
    Now I am receiving e-mail on both devices normally.
    No clue why this happened, but Apple needs to find a fix ASAP.

  • After iOS7 upgrade, iTunes only gives blank screens.  And Netflix won't load.  Any idea on what to do?

    After iOS7 upgrade, iTunes only gives blank screens.  And Netflix won't load.  Any idea on what to do?

    Yep. I did some more poking around and found that one. Downloaded it and tried to run it and got more errors. Did some more searching and found a fix for the installer on Vista. Ran the fix and tried the ipod software again. It got further, but then hung up again. I'm still trying to figure this all out. Anyone got any answers it'd be much appreciated.

Maybe you are looking for