After upgrading to 3.0 there is no sound

I buy my Ipod touch 2 gen two days ago. I upgraded the firmware to the new version and everything works fine but there is no sound. I mean no sound at all, music, applications, all are muted up. I reset the settings many times, restore it via iTunes and still have the same problem.
But the worst thing its that I can´t even downgrade to the 2.1.1 firmware, because when I do that, my iPod get stuck on the apple logo screen.
Any advice will be much appreciated

Hi Avi,
var/log/messages is full of references to the DS5100 so maybe its all ok?
Feb 2 23:30:11 ovmdl580 kernel: [ 1307.655264] scsi 3:0:1:8: Direct-Access IBM 1818 FAStT 0730 PQ: 0 ANSI: 5
Feb 2 23:30:11 ovmdl580 kernel: [ 1307.657953] scsi 3:0:2:8: Direct-Access IBM 1818 FAStT 0730 PQ: 0 ANSI: 5
Feb 2 23:30:11 ovmdl580 kernel: [ 1307.668701] scsi 3:0:3:8: Direct-Access IBM 1818 FAStT 0730 PQ: 0 ANSI: 5
Feb 2 23:30:14 ovmdl580 kernel: [ 1310.882964] scsi 4:0:0:8: Direct-Access IBM 1818 FAStT 0730 PQ: 0 ANSI: 5
Feb 2 23:30:14 ovmdl580 kernel: [ 1310.888360] scsi 4:0:1:8: Direct-Access IBM 1818 FAStT 0730 PQ: 0 ANSI: 5
Feb 2 23:30:14 ovmdl580 kernel: [ 1310.892143] scsi 4:0:2:8: Direct-Access IBM 1818 FAStT 0730 PQ: 0 ANSI: 5
Feb 2 23:30:14 ovmdl580 kernel: [ 1310.899848] scsi 4:0:3:8: Direct-Access IBM 1818 FAStT 0730 PQ: 0 ANSI: 5
Feb 2 23:44:19 ovmdl580 kernel: [ 2155.117533] sd 3:0:1:8: rdac: array IBM_DS5100_A, ctlr 1, queueing MODE_SELECT command
Feb 2 23:44:19 ovmdl580 kernel: [ 2156.064176] sd 3:0:1:8: rdac: array IBM_DS5100_A, ctlr 1, MODE_SELECT completed
Feb 2 23:44:23 ovmdl580 kernel: [ 2159.393440] sd 3:0:0:8: rdac: array IBM_DS5100_A, ctlr 0, queueing MODE_SELECT command
Feb 2 23:44:24 ovmdl580 kernel: [ 2160.450160] sd 3:0:0:8: rdac: array IBM_DS5100_A, ctlr 0, MODE_SELECT completed
Feb 2 23:44:25 ovmdl580 kernel: [ 2161.502471] sd 3:0:1:8: rdac: array IBM_DS5100_A, ctlr 1, queueing MODE_SELECT command
Feb 2 23:44:26 ovmdl580 kernel: [ 2162.433826] sd 3:0:1:8: rdac: array IBM_DS5100_A, ctlr 1, MODE_SELECT completed
Feb 2 23:44:29 ovmdl580 kernel: [ 2165.606361] sd 3:0:0:8: rdac: array IBM_DS5100_A, ctlr 0, queueing MODE_SELECT command
hopefully?

Similar Messages

After upgrade to iOS 5 there is a large chunk of data ( 9Gb) on the phone labeled as "Other" in iTunes.

After upgrade to iOS 5 there is a large chunk of data (>9Gb) on the phone labeled as "Other" in iTunes. I suspect this is the music library from before the upgrade. How do I delete this data?

Same happened here on my iphone 4. I heard it's something about bad meta data in the music files but I've no idea. It seems to be fixed by deleting the music from the iphone and then syncing it back on. No need to reset so far luckily!

After upgrading to iOS4.1 there any green points problem at camera?

I was also had the green circle problem in take photo at the iphone4
If the ios4.0.2 after upgrading to ios4.1 , will not have this problem occur?
have anyone know that ?
thank you

No, the GM is not an unannounced public release. GMs are still beta and just for developers. All Gold Master means is the feature set is finalized but it can still have minor changes and bug fixes prior to release.
If it were an actual public release, you could get it from iTunes rather than torrent sites.

Uninstall CS2 after upgrade to CS4 - is there a new walktrough

Just upgraded from CS2 Premium to CS4 Premium on Mac 0SX 10.5.6, but left CS2 on there as I wanted to copy over a few preset files etc from CS2 to CS4.
Now I want to remove CS2. I've got an old document link for removing CS2 but it mentions removing directories that I know CS4 has installed or shares (e.g. Adobe Utilities and Adobe Updater)
Is there a new walkthrough or utility to remove CS2 once you have upgraded to CS4?

Buko
That's a bit too succinct and general....
In your apps folder will be a folder call 'Adobe Creative Suite 2'. Within this is an' uninstallers' folder which contains the file 'How to uninstall.pdf'. This file is reproduced (as far as I can tell) at http://kb.adobe.com/selfservice/viewContent.do?externalId=331301
This talks you through the various folders/files to remove.
BUT BEWARE - this was written before CS3/4 existed and as my post (http://www.adobeforums.com/webx/.59b82bde) points out, there will be some folders it suggests you remove, but that CS4 actually need (e.g. Applications/Utilities/Adobe Utilities folder).
I'm seeking a new 'How to Remove CS2 after installing CS4' document myself.
Have spoken to Adobe Tech support today and their suggestion was to "not remove any files/folders you think CS4 may need'.
How flaky is that for Technical Support - some people like to keep their hard drives lean.

After upgrade of OLTP, is there a report to tell me what needs replicated?

Hello,
We have just upgraded our OLTP system to ECC 6.0. Various steps of our process chains in BI are abending saying we need to replicate the datasource. Without replicating ALL datasources and activating ALL transfer rules, is there a way to know which individual ones need replicated/activated? I guess I'm looking for a report I can run that will tell me if I have anything in BI that will need to be replicated/activated due to timestamp differences.
Thanks,
Diane

Hi
Generally before Upgrading , we should maintain one Check list for the DS that are needed to be replicated . Now, you have to go and see the Process chain / Info Packages for the DS and make list of them and need to replicate, as there is no othergo to list the Ds to be replicated which is used in your project, just try with RSDS Table (Biside SE16) to have a basic idea which are the Ds you were updating before Upgrade.
Hope it helps and clear

After upgrading to Firefox 8 there are no bookmarks in the sidebar when it is displayed. The bookmarks are there under the Bookmarks menu. History appears in the sidebar

There are no bookmarks in the bookmarks sidebar. The only way I can access my bookmarks is by clicking on the Bookmarks Menu. All booksmarks and folder then show up in the drop down menu - but when I go to organise them, there is nothing listed under Organise. My history will show up in the sidebar. I can't find a way to sort my bookmarks, and don't know if I can save a new bookmark.

Open or close History Sidebar --> CTRL+H 
Open or close Bookmarks Sidebar --> CTRL+B
Click the small "x" to the right of the word History or Bookmarks in the Sidebar will close that sidebar 
If the History Sidebar is open, CTRL+B will close it and open the Bookmarks Sidebar 
If the Bookmarks Sidebar is open, CTRL+H will close it and open the History Sidebar
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How do I email a pdf from my iBooks Library after upgrading to iOS8? There is no Share button.

I Have upgraded my iPad Air to iOS 8 this morning. I cannot share or email a pdf document in my iBooks Library. Any suggestions on how it works?
Thanks.

I still get the share icon on my PDFs, at the top left of the menu - though on some PDFs I only get the 'Print' option on it, they are presumably protected in some way

I have an iPhone 4S and have not been able to access the new phone features after upgrading to ios6. There is no option to decline

I have an iPhone 4S and upgraded to ios6 but do not have access to new phone features! Any suggestions?

Check Settings > Phone > Reply with Message >
     I'll call you later
     I'm on my way
     What's up?
When you get a call, swipe the telephone icon (on the right side of Answer button) to reply.

After upgrading to itunes 7.3.2 system sound does not work

I recently upgraded my itunes to 7.3.2 and the sound worked for a short time. it then began to cut on and off until ceasing to work completely after a day or so. I have run diagnostics and my computer can produce sound, but not in any programs or any of the system sounds. i reinstalled windows xp and the sound worked, but when i installed itunes again the sound once again stopped completely. i have checked all the drivers, codecs, hardware etc. and they seem to be in order. what is going on?

I really struggled with this one and my IT people couldn't help. They suggested that I add my secure corporate website to the Java Exceptions Sites, and use the Java client, but that didn't work. I tried the CITRIX Native CLient (ICA Client) and that didn't work either. So, I searched my Mac for all of the instances of CitrixICAClient, or anything else with ICA in it. I then deleted all of those files, shut down Safari, rebooted my computer and tried again to log into my corporate site using the Native Client conenction option. I remembered from years ago, that the first time you try to connect using the native client, that Citrix plugin is downloaded. THat's exactly what happened and I haven't had any more problems. So apparently, you have to clean up a little adn make sure that any "old" citrix products are removed.

After upgrade to iOS 5.0.1, no sounds on 4s

I was prompted today to do the upgrade, and it was smooth. But now, I get no sounds other than vibrate. In settings, everything looks the same and works when I test it. The next thing I will try is turning off vibrate, once I have my husband's phone handy for testing mine. Right now it is the only way I know of a call.
I may be having better luck with audio on connecting an outgoing call. That was hit or miss but easily fixed by hitting speakerphone twice. I need to start counting, but it seems like I am not having that issue as much, if at all.

Operator error! The mute button was on.

Mass storage issues (does not play in car on home stereo) after upgrading to V4.5

I am having issues with Mass Storage after upgrading my 8130 to V4.5. I can no longe hook the device to my home stereo or car stereo to play music. My computer does read the device. It is not my media card. I still have my old blackberry: the card shows up on both phones and computers. It is not my cables as they work with my old phone. I have also done all the obvious things like pull the battery and play with the media card setting
This guy had the same issue though i never saw resolution:
Any idea is appreciated! After upgrading the device software to version 4.5 earlier this week (BlackBerry 8800 with v4.5.0.69 (platform 2.7.0.72)) as proposed by T-Mobile and RIM Germany something has changed with the behaviour when connecting via USB as a mass storage device:
Using a micro-SD card with 2 GB for some months now as a storage for MP3-Files which can be played with my Blue&Me system in my car. This is some kind of Microsoft Windows mobile platform (Automotive) providing playback of MP3-files etc connected via USB. This was never a problem with the previous software. It behaved as it should. Here is an example of what it previously did (taken from http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...):
"On your Blackberry device, you may or may not first see a message about insufficient current. It just means you can't charge your Blackberry with that PC USB port. Hit the escape key once (on your Blackberry device). You will be prompted a question : do you want to activate USB Mass Storage Mode. You can answer YES or NO. Answer YES."
The message about insufficient current is important here because the Blue&Me system does not provide the current as proposed by USB-standards. Anyway after clicking this message/warning away the Blue&Me would recognize the mass storage and start playback.
After upgrading to v4.5 there is no warning about current any more and the mass storage can't be recognized. I've checked both components: The B&M works fine with any other USB-devices connected, and the BB works fine with Windows after connecting via USB (presumably because there is enough current!). All standard settings in Options/Media card for enabling mass storage have been tested but without success.
Hopefully someone whose genius far exceeds mine will help me with this. Thank You.

I have exactly the same issue with my car stereo equiped with USB and my 8130 device. OS 4.3 works fine (and displays the "insuficcient current" message) and after upgrading to 4.5 mass storage mode not works anymore. And of course it works with regular desktop/notebook computers. I've made many experiments with different storage cards (now I use SDHC 8G from SanDisk). The card works fine if I attach it through card reader in my car, it even see multiple drives which cardreader creates.
Even more I wrote the small blackberry application in java (i'am professional programmer) and ordered BB keys for $20 to deploy it to device. The program uses the RIM api call Device.requestStorageMode() which in my opinion should turn on storage mode of device. But the result was the same - car audio don't see the mass storage with OS 4.5.
Interesting fact that in OS 4.3 the message about "insufficient current" appears BUT the device CHARGES via this USB without a problem. The same case with OS 4.5 - charging device is possible.
Also, I can't switch to OS 4.3 because it have the serious problem with bluethooth connections - it suddenly lost my handsfree link and its very bad if I get incomming call during driving and my handsfree not work.
Forgot to mention - now I have the OS 4.5.0.127
Michael.
Message Edited by djm132 on 04-09-2009 01:01 PM

"manually manage music and videos" setting disabled after upgrading iTunes!

Hello every one.
I used to manage my musics and videos manualy , so naturally "manually manage music and videos" check box was always "cheked"
Now after i upgrade my itunes to latest version (11.1.3.8), i find out that option is "Unchecked"!!
So i am not able to copy any music or video or book too my iphon !
If i try to enable that option again, it will clear my libraries and i will lose anything.
Why this happened? what can i do ? any workaround? seems like a bug to me. i didnt do anything just updated my itunes. that option was enabled on my iphone for like 3 years! now i just upgrade my iTunes and that check box is unchecked.
It seems stupid itunes think its another machine and says " it is synced with another library"
Any suggestion please?

Yea, i managed to fix my issue in a wild fashion way But I DONT suggest it to anyone.
I like to hear why it happened after upgrading iTunes and if there is any peaceful solution.
Bythe way, here is how i fixed it :
1-i checked "manually manage music and videos" checkbox and clicked on "Sync" button
2-It showed a threating message that it will erase my music and videos ,......
3-I clicked on OK button and let iTunes do any thing she said , but the second it started to delete my treasures from my iphone, i disconnected my phone by pulling USB cable.
Now i have my musics and videos untouched and got that Option enabled again and i can manage my Music/Videos and Books manually.

Firefox will lot load web pages after upgrading to version 3.6.6

After loading 3.6.6 I can no longer access the internet. Norton Internet Security 2010 has quarantined 3 Firefox files: nssdbm3.dll, freebl3.dll, softokn3.dll
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.6. Firefox worked fine prior to upgrade. After upgrade, Norton told me there was a security incident and I needed to reboot. I have not been able to use Firefox since rebooting.

Thanks for the reply. It doesn't have to process the php, it just has to show the HTML content. It did that just fine before the last upgrade but won't now.
I've seen that page you referenced: http://kb.mozillazine.org/File_types_and_download_actions.
It doesn't help. The things it says to look for aren't there for me, specifically:
browser.download.pluginOverrideTypes
plugin.disable_full_page_plugin_for_types
I followed the rest of the instructions but it didn't help.
I did get it to quit opening tabs, instead it prompts me what it should do with the file every time now. What it should do, and used to do, is open the php page and display the HTML content.
Any other ideas?

HT4623 Usatoday crashes after upgrading to ios 8

SInce I upgraded to ios 8, when trying to open usa today app, it opens for about 10 seconds, then closes.
THis happened after upgrade to ios 8

Hi there Flcuomo,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
-Griff W.

Forms problem after upgrade

Dear all,
We recently upgrade our applications from 11.5.10.2 to r 12.13.
After upgrade, we noticed that there is an asset module form , where the asset number is being
displayed.We noticed that there is a one letter blank space infront of the asset number. I tried regenerating the forms too..
What could be the problem as the data is fine in the database ?

Hello,
It seems best to create a Service Request for this issue.
Regards, Carlo.

After upgrading to 3.0 there is no sound

Similar Messages

Maybe you are looking for