After upgrading to 6.83.14.1 version I can't send ...

Hi,
After upgrading PC suite to 6.83.14.1 (from ver 6.8x), It seems that when Im trying to send sms directly from the contacts to a person that his mobile number is not registered under mobile section but general phone or other definition, then :
mouse right click on the contact name doesn't have the new message option (only if his mobile is registered under mobile).
So my questions are :
1. How to transfer all not mobile defined numbers (but phones) to all contacts in a batch process ?
2. If option 1 is not available , therefore what will be the solution here ?
Regards
Etay G

Hi,
I'm afraid that there is no easy way to do this but you have few options:
- you can sync all contacts to some PIM application, like Outlook Express or Lotus Notes, then change number type and sync contacts back to your phone
- you can open contacts one by one using PC Suite Contacts Editor and change number type
- you can open contacts one by one using your phone's Contacts application and change number type

Similar Messages

After upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings general Network says Not Available Why is this? Did the upgrade cause this?

after upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings>general>Network>says Not Available Why is this? Did the upgrade cause this?
steve

See this tip --> http://support.apple.com/kb/TS1559
If this doesn't resolve it you most likely have a hardware failure. Fortunately, your phone is in warranty, so if you take it to an Apple store they will replace it.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

First, back up all data immediately, as your boot drive may be failing.
Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

TS2755 After 'upgrading' to iOS 7.0.2, I am unable to send or receive photos in iMessage. With the previous iOS, it was no problem. Is there a fix? Apple support is the usual 'black hole' that ***** up endless time.

After 'upgrading' to iOS 7.0.2, I am unable to send or receive photos in iMessage. With the previous iOS, it was no problem. Is there a fix? Apple support is the usual 'black hole' that ***** up endless time.

Apple guys are deleting posts. I have found my posts have been deleted. Apple should MUST let us downgrade at least to previous release from current which was working fine.

HT4623 Since upgrading my iPad 3 to iOS 6 I can't send or receive e mail ?

Since upgrading my iPad 3 to iOS 6 I can't send or receive e mail ?

Have you an Internet connection? If not, unplug router for a few minutes and try again. Power down your iPad and start it up again. If still no success delete the account an set it up again.

Videos not playing in landscape mode after upgrading my Z10 software to latest version

Hello,
Videos in my Z10 iss not playing in the Landscape mode after upgrading my Z10 smart phone software with the latest version. I think it is not sensing when i turn my phone.
Is it a bug in the upgraded software or do i need to do any changes in the settings.
Also -- i dont seem to have Blackberry balance on my Z10. Please advise
regards,
Yogesh

Maybe someone else has another suggestion? I'm running 10.2, not released by VZW Yet. Works fine.
THE BITTERNESS OF POOR QUALITY, LINGERS LONG AFTER THE CHEAPNESS OF PRICE, IS SOON FORGOTTEN.

15 apps cannot be upgraded after upgrading to iOS 8.0.2 version

15 apps cannot be upgraded after upgrading to iOS 8.0.2 what should I do?

Have you tried updating them one at a time? If that doesn't work, then update them in iTunes on the computer you sync with, delete the apps from your device, and then sync the updated ones to it via iTunes.
Cheers,
GB

Please after upgrading to adobe 2014 cc latest version having issues uploading to ftp server

please is anybody experiencing issues uploading after upgrading to ftp server... it show error uploading images and timeout.

I am having the same issue. When is this going to get fixed? It is annoying exporting as HTML than uploading through another client.

After upgrading to 7.6.1, drive letter changed - can't restore

After upgrading iTunes to version 7.6.1 on my Vista, none of the files could be played, giving me a "file not found". The music is still in the same old folder on my M-drive. Though, in the iTunes library file, the drive somehow was set to F, my DVD-drive.
I have tried consolidating, set/reset drive in settings, edit the library xml-file, but it still insist that my music is on the DVD. How can I restore the library without having to import all the music again?

Found the solution. I had to move the library.xml out of the iTunes folder, find and replace all the entries of the wrong drive letter, and the import the XML to iTunes, making it a new library xml file. This makes all the song tagged as imported today, else everything seems to be fine.

After upgrading to itunes 7.3.1.3 I can't run the backup to dics anymore.

After upgradeing to itunes 7.3.1.3.1 I can not run the backup any more. Also the CD burning runs very slow.
The DVD burner run ok with other software.
After it checks for file to be backed up it kept ejecting the blank DVD and asking for a blank disc.
I have even replaced the DVD drive with drive from another computer.I also reinstalled ITUNES once-- It ran as a repair during the install.

I have used this same DVD Burner to backup my list from within iTunes before. I did this back in June just after I purchase 30 songs. I think I was running version 7.1 or 7.2 when the DVD backup worked. If not sopport then why does their diagnostics say DVD/CD Diagnostics. Even so I have the same problem on my other PC with a CD Burner. I think Apple support sound a little like Microsoft. I once had a problem with Windows NT and had to call MS support 5 times before they said their software had a defect and issued a patch.

Lion ical - i don't like the template after upgrade lion i want the old one how can i change back the old one

i dont like the new look of ical after upgrading lion.
i cannot see the small month calendar in the right bottom corner.
and i dont like the brown colour on top.
but it seems there is no way to change.
how can i change it back like the look before upgrading lion.

I have no solution, but I agree. I also want the mini calendar back at the bottom left......

After upgrade on OS and Safari 7.1 I can no longer do 2 finger scrolling. Anyone else find this bug in upgrade?

After upgrade to 10.95 OS and Safari 7.1 I can no longer do 2 finger scrolling. Anyone else find this bug in upgrade? If so, ideas on how to fix it?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

After upgrade to 10.5.2 Itunes wont start can't acces Itunes or Icloud

After upgrading my Itunes I can't open Itunes I have the uninstall and install for 3 times and does not work not even on safe mode... please help

I have the same problem. One blog said to right click on iTunes and select Run as Administrator. That worked, but only on that launch. When I closed and tried to launch again, it does nothing.

Iphoto hangs after upgrading to Yosemite and latest iPhoto version

It tells me the library needs upgrading, and starts to search the library. The progress bar suggests something is happening then hangs after about 99% completion. I have had to force close twice after several hours stuck at that point and then start the whole process from scratch when I restart.

Have you followed these instructions - http://www.fatcatsoftware.com/iplm/Help/rebuilding%20a%20corrupted%20iphoto%20li brary.html
iPhoto Library Manager > Help > Rebuilding a corrupted iPhoto library
Printable help
Rebuilding a corrupted iPhoto library
If you have an iPhoto library that is corrupt and causing iPhoto to crash or otherwise be unusable, iPhoto Library Manager provides the ability to rebuild your library based on the information found in its library data files. Note that iPhoto also has a built-in rebuild function that can be sometimes be used to repair a corrupted library database. You can find instructions on how to use that on Apple's website at http://support.apple.com/kb/HT2638 (iPhoto 6 or later) or http://support.apple.com/kb/HT2042 (iPhoto 5 or earlier).
iPhoto Library Manager's rebuild works differently, in that instead of trying to repair the library in place, it creates a brand new library and tries to reimport the entire contents of the original library into the new one, including reconstructing albums, photo metadata, etc. Note that rebuilding a library has all the same limitations as other photo transfer operations as far as what can and can't be copied between libraries. Also, depending on how badly damaged the library is, iPhoto Library Manager may or may not be able to piece together some or all of the library metadata.
To start a rebuild, select the library you would like to rebuild, then choose the "Rebuild Library" item from the "Library" menu. You will be prompted to choose a location for the rebuilt library, and whether or not you want iPLM to scavenge orphaned photos it finds in the library package. Once you've made your choices, iPLM will examine the library and rebuild the library structure and photos as best it can, then display you a preview of what it was able to find. If your library is badly damaged and the preview is missing a lot of content from the original library, this can save you from going through with a rebuild that won’t end up being of much help.
Once you've had a chance to examine the preview, if you want to go forward and create the rebuilt library, click the "Rebuild" button in the upper right. iPhoto Library Manager will create a new library and start importing the contents of the original library into the new one.
Scavenging photos
In some cases, either the iPhoto library database is too damaged for iPhoto Library Manager to be able to salvage any information from it, or the library data is incomplete and there are photos that still exist inside the library package, but iPhoto has lost track of them. In these cases, you may want to check the "Scavenge orphaned photos" checkbox when choosing a location for the rebuilt library. After iPhoto Library Manager has read the library data as best it can, it will perform an additional pass through the package and locate any photos that are no longer referenced in the library database. Any additional photos that are found will be included in the rebuild, and a new "Scavenged Photos" album will be created in the rebuilt library containing any scavenged photos.
LN

HT4528 After upgrading to iOS 7, my iPhone and iPad can no longer connect to App Store. I did reset all settings, still the same. Please help

I just upgraded my iPhone 4 and iPad Mini to iOS 7, suddenly they both can no longer access to iTunes nor App Store. The message says "Cannot connect to App Store". After some research, I did reset all, and still the same. Can anyone have a clue? Thanks,

As I mentioned earlier, when I clicked on the App Store or iTunes Store, the message reads "Cannot connect to iTunes Store" or "Cannot connect to App Store" depending on which I clicked.
I did check iTunes & App Store, it used to show my Apple ID there, but somehow it shows empty there. I then manually typed in my Apple ID, it just won't work. I know for sure that my Apple ID works as I tried logging online using that ID fine, but my iPhone and iPA
Thanks,

After upgrading to 6.83.14.1 version I can't send ...

Similar Messages

Maybe you are looking for