After upgrading to Belle, not able to view number ...

I recently upgraded my Nokia E6-00 to Belle OS. After upgrading, i am not able to view number of characters remaining while composing text msg.
While composing a text msg, we see number of word characters remaing to complete the first part of msg. If that it is completed then second part starts and so on.
For eg., when we open the compose msg window, we see 160(1). Once we start typing-we see the no. or characters remaining - like 130(1), 98(1), and so on.
But after upgrading to Belle, i am not able to view number of characters remaining while composing text msg.
Can anyone help on this?

The problem is not with duplicate contacts. It is with Nokia Suite. It installa a piece of software on the phone after which this link breaks.
How do I know this? I recently tried the leaked belle version by flashing my phone. After which everything was working fine. That is numbers showing up in call log and with messages.
I recently put the official release using Nokia Suite and the problem is back. Hope Nokia figures this out and fixes it.

Similar Messages

I received a massage to upgrade carrier, after upgradtion I am not able to view the APN setting which earlier was showing. Please advice how to resolve the problem as I am not able to use internet on my mobile with my data sim.

Hi,
I am using Qtel data sim at Doha - Qatar. I have receive a message to upgrade your carrier which I did.
Unfortunetly after upgradtion I am not able to view and edit the Cellular data setting & APN setting.
Please help me out as I am not able to access internet.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

After upgrading to Lion, not able to use Quicken 2007. Get the following message: PowerPC applications are no longer supported. Anyone has a solution?

After upgrading to Lion, not able to use a PowerPC Application (Quicken 2007). Any solution?

Quicken Essentials 2010 has less features than Quciken 2007. Keeping track of investments is one feature I need and Quicken Essentials does not include that function. I may have to consider others financial software, such as iBank4, Money4, iFinance, and Money Well.

After upgrade to photos not able to import photos from my kodak M883 camera - says not correct format - still jpeg - worked before update - help!

After upgrade to photos am not able to import photos from my Kodak M883 camera. Program says not correct format - camera files are still jpeg - had no trouble importing before upgrade - Help!

Same thing is happening with me. IPhoto will not import .jpg from my Kodak! It used to all the time. Now it gives me an error msg saying .jpg is in the wrong file format. Can someone help?
Steve

Not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0

Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits
I am not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0 after the forms upgrade 10.1.2.3.0 as per note:Upgrading OracleAS 10g Forms and Reports to 10.1.2.3 (437878.1)
Java/jre upgraded to 1.7.0.45 and JAR files regenerated(without force option). Able to opne forms without any issues.
A)
$ORACLE_HOME/bin/frmcmp help=y
FRM-91500: Unable to start/complete the build.
B)
$ORACLE_HOME/bin/rwrun ?|grep Release
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov
28 14:20:45 2013
Is this an issue? Could anyone please share the fix if faced the similar issue earlier.
Thank You for your time
Regards,

Hi Hussein,
You mean reboot the solaris server and then start database and applications services. We have two databases running on this solaris server.
DBWR Trace file shows:
Read of datafile '+ASMDG002/test1/datafile/system.823.828585081' (fno 1) header failed with ORA-01206
Rereading datafile 1 header failed with ORA-01206
V10 STYLE FILE HEADER:
        Compatibility Vsn = 186646528=0xb200000
        Db ID=0=0x0, Db Name='TEST1'
        Activation ID=0=0x0
        Control Seq=31739=0x7bfb, File size=230400=0x38400
        File Number=1, Blksiz=8192, File Type=3 DATA
Tablespace #0 - SYSTEM rel_fn:1
Creation   at   scn: 0x0000.00000004 04/27/2000 23:14:44
Backup taken at scn: 0x0001.db8e5a1a 04/17/2010 04:16:14 thread:1
reset logs count:0x316351ab scn: 0x0938.0b32c3b1
prev reset logs count:0x31279a4c scn: 0x0938.08469022
recovered at 11/28/2013 19:43:22
status:0x2004 root dba:0x00c38235 chkpt cnt: 364108 ctl cnt:364107
begin-hot-backup file size: 230400
Checkpointed at scn: 0x0938.0cb9fe5a 11/28/2013 15:04:52
thread:1 rba:(0x132.49a43.10)
enabled threads: 01000000 00000000 00000000 00000000 00000000 00000000
Hot Backup end marker scn: 0x0000.00000000
aux_file is NOT DEFINED
Plugged readony: NO
Plugin scnscn: 0x0000.00000000
Plugin resetlogs scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign creation scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign checkpoint scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Online move state: 0
DDE rules only execution for: ORA 1110
----- START Event Driven Actions Dump ----
---- END Event Driven Actions Dump ----
----- START DDE Actions Dump -----
Executing SYNC actions
----- START DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (Async) -----
Successfully dispatched
----- END DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK'
(SUCCESS, 0 csec) -----
Executing ASYNC actions
----- END DDE Actions Dump (total 0 csec) -----
ORA-01186: file 1 failed verification tests
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1:
'+ASMDG002/test1/datafile/system.823.828585081'
ORA-01206: file is not part of this database - wrong
database id
Thanks,

Not able to view catalogs in CCM after clicking on "edit catalog"

Hi all,
I am not able to view a single catalog (supplier, procurement or master) in CCM after clicking on edit catalog.
After clicking on "start" pushbutton, it is giving warning message "Error while editing Master catalog"
Could anybody tell me, what would be the problem ??
Thanks in advance.
Regards,
Vivek !!
Edited by: vivek kulkarni on May 26, 2009 12:18 PM

Hi Jason,
Thanks for reply and solution.....
but this problem is only for my user ID and not for all other user ID.
when we tried with other user IDs, all the catalogs are in green state and working fine. For my ID I am not able to view any catalog into edit catalog screen. When I am trying to search any catalog it is giving me warning message "Error in master catalog". When checked in SLG1 I got error as "catalog (catalog name) not found".
Is it related to any user setting or like that... as this is the issue with my individual ID.
Please suggest.
Thanks !
Vivek

Finder not able to view folders and files on EHD after updating to OS X 10.9.4

I can see still see 'Hitachi' in the 'Devices' Sidebar, but I am not able to view folders and files on this Hitachi XL2000 2TB FAT32 Hard Drive (EHD) that is USB connected to the iMac below.
Late 2013 Apple iMac (27-inch Display 2560 x 1440), 3.4GHz Quad-core Intel Core i5, Turbo Boost up to 3.8GHz, 8GB 1600MHz DDR3 SDRAM - 2X4GB, 512GB Flash Storage, NVIDIA GeForce GTX 775M 2GB GDDR5, Magic Trackpad, Apple Wireless Keyboard and OS X 10.9.4 Mavericks
All was fine until I updated from OS X 10.9.3 to 10.9.4 earlier this week, so now when I double-click on 'Hitachi' it just loads and loads with nothing happening and never displays the folder and file contents of the EHD.
Also, confirmed that Hitachi EHD has been removed from Spotlight indexing per System Preferences > Privacy > + > Hitachi and it was so this does not seem to be an indexing issue.
I have used OnyX and Apple Disk Utilities unsuccessfully to try and fix this problem.
Interestingly, Backblaze online backup still sees the EHD and connecting this EHD to a Win 8.1 PC also sees the EHD.
Further, I ran the commands below in 'Terminal' to make sure the drive was visible and got the following results which shows that the EHD is not hidden.
iMac:Applications john$ chflags nohidden /Volumes/Hitachi/
iMac:Applications john$ GetFileInfo /Volumes/Hitachi/
directory: "/Volumes/HITACHI"
attributes: avbstclinmedz
modified: 07/10/2014 23:26:44
Finally, I installed XtraFinder and am still not able to see the contents of the EHD, but when I installed OmniDiskSweeper I can navigate the EHD folder tree with no problems and can see the contents of the EHD, but when I try and open up a file it opens Finder which loads and loads and nothing happens.

Apple Support was quite helpful, but in the end I will wait to do a clean install of OS X Yosemite which is due in the Fall and not try and fix OS X 10.9.4 Mavericks.
It turns out that I run backups on my '/Users/john/Library' and the size of this folder before the 10.9.4 update was 1.07 GB and after the update it is 806.9 MB which is baffling, but in the end all of these problems should be resolved with a clean install of OS X Yosemite.
One lesson learned for the future is that I will wait on installing an update until it has been in the wild for awhile as a quick OS X Mavericks Finder Problem search and similar searches show there could be an issue.

After the latest release of iOS 8.1.2, I am not able to view videos

Hi All,
After the latest release of iOS 8.1.2, I am not able to view videos from the below website:
www.startv.in/episodes/santosh-discovers-the-truth/76711
Until the previous iOS version 8.1.1, there wasn't any problem. But now none of the video is playing.
Error message displayed is: This video isn't encoded for your device.
How can this happen as some time back it was all fine until I updated the iOS.
Please help. This is my favourite channel websites for lots of serials online.
<Subject Edited by Host>

The video won't play where I am but this might work for you. Go to the website. Tap the URL field. Pull your Favorites down. Tap request desktop site.

HT1414 I have an Iphone 3GS 16gb which was working on ios 4.1.1 The phone isn't factory unlocked. I upgraded it to IOS 6.0.1 and after that i am not able to search for networks. it shows no services.

I have an Iphone 3GS 16gb which was working on ios 4.1.1
The phone isn't factory unlocked. I upgraded it to IOS 6.0.1 and after that i am not able
to search for networks. it shows no services.

Ok thank you so much! Although I ended up taking the sim card out of my new Iphone and reinserting it into my old one it finally let me restore it! So thanks once again this really helped!

I'm not able to view my photos in ios 5

I'm not able to view my phots(in photo stream) which i took over the iphone 4. also when i take any new photo Camera application is closing and not able to view the phots which i have taken. can some one guide me how to fix this issue.

Some Users have reported that a Restore has Resolved Issues after the Upgrade...
If a Restart and a Reset do not help... Try a Restore from Backup... if the issue persists Restore as New...
iPhone Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

Not able to view PDF in Safari 6.0.2

Hi,
Not able to view pdfs in my Safari 6.0.2. I get a black screen and the following message -The Adobe Acrobat/Reader selected for viewing PDF documents in browsers cannot be found at its installed location; it may have been moved or deleted. Please reinstall or repair the application. (16:9)
I am able to download and view the pdfs though. Hw do I solve the problem.
Thanks,

Reinstall the latest version of Adobe Reader - http://www.adobe.com/products/reader.html - it will install the latest version of the "Adobe Acrobat NPAPI Plug-in, Version 11.0.01" and you'll be able to view any PDF file inline using Safari (Safari does have a 'built-in' PDF renderer that works for some files, but not for any AcroForms, etc.). And Preview is just about the worst PDF reader available - I would make sure that you set Adobe Reader to be your default application for viewing and interacting with PDF files.
Good luck - be sure and restart Safari after the plugin is intstalled. Call back should you have any problems.
Clinton

Not able to view text while typing beyond the top edge of the keyboard

I have an iPad mini with updated iOS 8.1.3 ......
Honestly I was very happy with iOS 7 it was perfect. The iPad was working fast and effortlessly. Just like how any apple product should be.
Until iOS 8 spoiled the show. There are many problems I'm facing after the update, but I want a solution for my major problem.
Problem 1: (Major –Blinded by the Keyboard)
I'm not able to view the body text beyond the edges of the keyboard while I’m typing; may it be in Notes, Pages, Numbers, Keynotes, calendar or any other app, which requires typing. Earlier I could just swipe it up and so it got scrolled to the end of the document. I extensively use notes, Calendar, pages, numbers, and keynote on iPad but sad that I can't see anything, though it is typing beyond the edge of the new keyboard. It's just stuck. Presently I'm copy-pasting, by typing at the beginning of the document cause after it reaches the edge of the keyboard I'm blind can't see. Please fix it soon before people realise this.
Problem 2: (updating)
iOS 8.1.2 is slow for iPad mini 1. When the processor is not able to manage this update then why does Apple give the option of updating. iOS 7 was just perfect. I was forced to update it because my app updates wouldn't update. Soon as I click update it opens the app and there you have it 'nothing'.
Problem 3: (Siri)
what is the use of Siri when it is slow to react, (in 3G). It just opens up slow.
Problem 4: (Photos app)
Photos app response time is very slow on iPad.
Problem 5: (assertive touch)
The assertive touch button on screen just goes dud sometimes on iPad.

For your keyboard problem: Hold down the home & sleep/wake buttons simultaneously until the Apple Logo appears then let go & let the iPad boot up normally.
For your other issues, & if you do not wish to update to iOS 8.2, do a general reset:
Settings->General->Reset->Reset All Settings. You won't lose any data but will have to log back into your wifi networks.

MM not able to view icon's

Hi people
i am getting some problem in message mapping that problem is, i am not able to view (delete and hide all,show all. this type of all button's)
means below of design tab icon's, how can i see that, i want to map 1:1mapping but it not showing to create, if any settings is there to view that.
when ever we create MM name it should show, but problem is not showing any time after saving before saving after editing before editing
what is this problem first time i am getting this
please tell me ASAP
regards
shekar

Hi,
Check with your JDK version it shld be 1.4.2_XX
Check with this
Message Mapping .. Some Icons under Design Tab grayed out
Regards
Seshagiri
Edited by: N V Seshagiri on Mar 26, 2008 8:46 AM

Not able to view the created respository in ACS server

Dear All,
I am not able to restore the taken backup & even it is not showing me option which is disabled in GUI.
I have tried to restore the same though CLI.
But i am not able to view my created backup repository.
Below is the command which i used;
MMKNDACS/acsadmin# show repository ACS_BACKUP
% Protocol does not support listing directories
MMKNDACS/acsadmin#
this is error i am getting while executing.
Please help me to resolve the issue ASAP.
Thanks & regards ,
sakthivel P

MMKNDACS/acsadmin# show run
Generating configuration...
hostname MMKNDACS
service sshd
repository ACS
url ftp://190.3.166.133/
user test password hash 71a6b29f4625151a11984ddbb6fffeff0a592a4f
repository ACS_BACKUP
url tftp://10.2.152.51/ACS
repository FTP
url ftp://190.3.70.45/
user admin password hash cc14bc179d2708cc31cbc21ee6a679cd22c095ae
repository TEST
url ftp://190.3.70.45
user test password hash 97dc37c94236ec1b4c56871c2e482cbd6f56bd33
repository upgrade
url ftp://190.3.70.45/
user admin password hash cc14bc179d2708cc31cbc21ee6a679cd22c095ae
logging localhost
logging loglevel 6
kron policy-list policyList_acs
cli acs scheduled_backup acs repository ACS_BACKUP
kron occurrence occurrence_acs
at 22:00
recurring
policy-list policyList_acs
icmp echo on

After upgrade to Belle- Nokia E6

After upgrade to Belle- E6, my E-6 Keeps hanging

Hi rabinder,
Welcome to the Nokia discussion boards!
It might be worth you trying to do the following resets:
Soft Reset:
Enter into your keypad *#7780# and when prompted, enter the default passcode 12345. If you have changed the code, it will be the code you changed it to.
A backup will not be needed as this will not delete any data.
Hard Reset:
This will erase all data on your device, so a backup is recommended before you do this.
Once backed up, enter *#7370# and when prompted, enter 12345 as the default passcode.
Hope this helps.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

After upgrading to Belle, not able to view number ...

Similar Messages

Maybe you are looking for