After upgrading to IO6 my 3G phone battery charger is no longer supported. Phone takes forever to charge. Any Ideas.
Battery charger no longer supported message after upgrading 3gs phone to IO6. Phone now takes forever to charge. Any ideas? Than
You could always check to make sure itunes is updated to 10.7 but im sure gdgmacdude is
right.
thanks
gdgmacdude
Hey dude
are there anymore hardware failure errors u know of
im kinda a novice apple man and could use all the help i can get
capp
Similar Messages
-
After upgrade to 10.2.0.424 - battery charging takes 24 hours and discharge less than 2!
I was surprised to see another post saying that battery performance improved after upgrading to 10.2.0.424 ...
Two days ago I updated over wireless to the latest version 10.2.0.424 and since then:
1- charging a battery takes 24 hours (and sometimes does not even fully charge!),
2- discharge takes a couple of hours,
3- the battery heats up more than before
4- blackbackground to BBM that is making unreadable
For reference - I had none of these problems prior to the upgrade, and I have not installed anything else since
Did anyone witness this problem? How can I downgrade to the previous version?
Thanks
Solved!
Go to Solution.I am not sure how to do downgrade exactly, but guys on crackberry did upgrade to early 10.2 leaks, so I believe it is possible to install 10.1 in preatty much same way.
but before you proceed that way. I would try wipe out in first place - maybe this will clear some bad config files, or something. Later, if it doesn't help, check out BlackBerry Link - there is "Restore Device" function. I assume it is doing some kind of full wipeout and reinstall, but I can not be sure. I even can't check by myself - I have linux Desktop and there is no Link for this OS.
Another thing that cames up to me... - how are you charging your BB? Is it through PC USB, or wall charger? If you have tried original blackberry wall charger included in the box, check is it working properly, is it giving proper current (mA)
Note, that if charger gives not enough current (like PC USB 1.0, or old wall chargers as well), it may charge long, or even not at all as device may consume more power for idle than charger is giving at a time. -
iPhone 4S after upgrading to IO6 has a problem with bluetooth in Peugeot 308 No battery status is shown. With 5.1.1 everything was ok.
https://discussions.apple.com/message/25195858#25195858
-
After upgrading to 6.1.1 phone is not shutting down manually instead it restart immediately.
After upgrading to 6.1.1 phone 4S is not shutting down manually instead it restart immediately.
After upgrading to 6.1.1 phone 4S is not shutting down manually instead it restart immediately.
-
after upgrading to OS5 my i phone is not showing names of incoming callers in my contact directory, i can only see number of incoming caller. Is there any settings to put this right? what can you do?
This started happening to me on my iPhone 4. Some text messages show only the numer they came from and those same numbers do not show the contact name in my calls list, even though the contacts are saved and synced via iCloud. I have tried to save different versions of the number in the same contact, but it won't work. If I call one of the recent numbers though, the conact comes up. I have tried reseting and restoring to no avail.
-
Facetime will not work after upgrade to io6 can anybody advise?
Facetime will not connect after upgrade to IO6 can anyone advise?
Hey there,
Maybe start here
[Troubleshooting Automatic Software Update in Mac OS X|http://support.apple.com/kb/HT1569].
Otherwise, try deleting this file. com.apple.SoftwareUpdate.plist located at /Users/YourName/Library/Preferences. Drag that .plist file from the Preferences folder to the Trash, empty the Trash and restart your Mac.
Have you tried resetting your widgets by hitting Command-R? If that doesn't, work trying trashing the two dashboard preference files.
The two dashboard preference files are in the following directory:
yourusername -> Library -> Preferences ->
The file names are:
com.apple.dashboard.client.plist
com.apple.dashboard.plist
Hope this helps.
B-rock -
After upgrading my ipad to ios7, its battery is getting charged way too fast and it drains at the same rate. I have been waiting for a new software update,to fix this, and nothing yet.....
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
-
Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?
I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week.
Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
Fix:
With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
It also supported AOL, AIM, Google Talk, Jabber.
Guess I miss it frist time... hope this helps... -
After upgrading to the latest ios my imessage and facetime apps do not function.....any one having similar difficulties?
Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode to use. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access. -
Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?
Resolve iOS update and restore errors
-
Hi! My friend told me that her iPhone 5 has problem and the charger is not charging. I gave her mine, but doesn't worked on her too. After that I tried to charge my iPhone 5 and it doesn't work on my phone too. Have you any idea ?? What to do ??? Thanx !
But of course I'm sure! I went to the local apple store and they replaced my charger ! Thank you!
-
after installing "OS X Mountain Lion" it saypowerpc applications are no longer supported" how to fix this, and why they dont say before you install that this might happen!
Office 2004 Applications Won't Work in Lion
You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.) -
i updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks
To show the battery percentage used go to settings
from there click general scroll to usage and select
scroll to bottom of page for battery usage select on.
This will show the icon battery and the percent numbers on the top right.
When phone is connected to an outlet sometimes it does not always show complete charge. I do not understand why but it is what it is.
FYI I sent reply to you not to deggie. You can have your own satisfaction to reply direct. -
I upgrades my iPAD 3 to iOS6 and now I can't open my Safari RSS bookmarks. Any ideas to help?
I upgrades my iPAD 3 to iOS6 and now I can't open my Safari RSS bookmarks. Any ideas to help?
I've installed 3 different RSS readers and none of them "grab" the default flag for RSS feeds.
I've also uninstalled the Podcasts.app, then re-installed a couple of the readers and Safari still has no idea what to do with them.
What's most annoying is that Safari declares it doesn't know what to do with a feed and offers to load the iTunes Store so I can pick an RSS Reader to install, and then the iTunes app declares it can't connect to the store (even when I'm already on the store or downloading an application at the time).
And yeah, I've tried the fixes for the cannot connect errors (Date/Time flip, reinstall bought app, setting DNS to Google even though it was already fine, and clearing Safari's cache just in case).
This is absolutely pathetic. -
I am having issues with MLBtv, when I switch on my ATV it no longer comes up as an option nor does vimeo or the iTunes store, i've tried resets etc and after those they appear. put the tav into sleep mode and mysteriously they don't re appear. Any ideas?
I am having the same issue but mine is with Netflix. And there are only 4 categories now on the main menue when there used to be 5. Something went crazy with ATV software.
Maybe you are looking for
-
Generic Extractor on cdpos & CDHDR - severe performance issues in productio
Hello friends, Can you take a look at my code? I have used a view in cdhdr table for extractor.code executes okay in dev and QA, but had to cancel job after running 48 hours. Any help is appreciated. This is my code in CMOD... FORM Zpurchasing_exit
-
Error status in JMS adapter - sync / async brigde. Message processed ok
Hi guys I'm having som trouble with my scenarion. I'm sending sync message from SAP backend to XI using proxy. From XI onwards to JMS adapter async (and the other way around for the response message). This works OK. However i have a status error in m
-
HT204655 How do I change the Names of a Group photos
How do I change the Names of a Group of photos in the Photos app
-
Beginner: Can't convert a hello.class file into a jar file: HELP PLEASE!!!
Hi, I created a hello.java file, converted into a hello.class file by using the java 2SDk compiler. The problem is that the hello.class file is in a directory I created: C:\JavaBuilder\hello.class I have a problem converting the hello class file into
-
Hi friends! One of our customers wants to use OO instead MS Office to export SBO documents and standart reports to Excel and Word. I've tested it and OpenOffice opens automaticly when we push on the Export tool-button. The problem is in macroses, whi