After upgrading to iOs 5.1 the AV composite cable don't work, appear a message: the device is not compatible with iPad2, anyone else had this problem or have a solution for it?

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.
If that does not work, restore the iPad to the factory settings.

Similar Messages

What do I do if I can't upload photos into my photobook? My upload always starts but then stops. All I have the option of doing then is cancel or retry. Has anyone else had this problem and found a solution?

What do I do if I can't upload photos into my photobook? Every time that I try, the upload starts but then stops. Then the only options I have are to cancel or retry. Has anyone else had this problem and how have they solved it?

I solved the problem. Had nothing to do with Mac or iphoto. Problem must be my the internet connection to my provider.
Upload at my office worked without any problem. One problem solved, now i am aware with a lot of discussions with my providers helpdesk ;-)

I have an Iphone4 and recently bought a car that has bluetooth. The bluetooth doesn't work when I tell it a name to call. Has anyone else had this problem?

I have a iphone4 and recently bought a car that has bluetooth. When I tell it a name to call it doesn't work. If I tell it the phone # it works. Has anyone had this trouble and how can I fix it?

pae59 wrote:
I have a iphone4 and recently bought a car that has bluetooth. When I tell it a name to call it doesn't work. If I tell it the phone # it works. Has anyone had this trouble and how can I fix it?
In most cars with built-in BT hands-free systems it is the car's system that does the speech to text conversion and lookup, not the phone's. so there's nothing that can be done in an iPhone forum to help you. Try the customer support site for the car. You can tell it's the car system if the contact list is downloaded to the car and displayed on the car's screen (if it has one).

I plugged my phone into my computer for the first time and it restarted my whole phone so now all my apps say waiting put I'm let my phone sync a view different times and it still doesn't work. Has anyone else had this problem?

I plugged my phone into my computer for the first time and it restarted my whole phone so now all my apps say waiting put I'm let my phone sync a view different times and it still doesn't work. Has anyone else had this problem?

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

After updating to 7.0.6 my iphone no longer shows in itunes. However it is recognised by my PC (windows 8) when click on my computer. I have tried reinstalling itunes and making sure the drivers are up to date. Has anyone else had this problem?

Hi guys. After updating to 7.0.6 my iphone 5s is no longer showing in itunes. Strangley it is recognised by my PC (windows 8) when I click on my computer. I have tried reinstalling itunes and making sure the drivers are up to date, but this has made no difference. Has anyone else had this problem or does anyone have any advice? Thanks

Device not detected in iTunes for Windows

I recently updated my iTunes to the new version. For some reason the titles and details of songs on the SONGS page do not appear, although the songs will play. Has anyone else had this problem? Every other page seems to be ok.

I recently updated my iTunes to the new version. When I opened it I found that there were no details listed on the SONGS page. On all other pages the relevant pictures/details appear. Although there are no details showing on the songs page, the songs are obviously there as when you click on a line it plays the song that should be listed. Has anyone else had this problem? (I am using a Windows XP Pro system on my Laptop).

Did anyone ever suggest you reset your PRAM?
http://docs.info.apple.com/article.html?artnum=2238
Also might want to try resetting the SMC, although I
doubt there's an issue there.
http://docs.info.apple.com/article.html?artnum=304123
I'm getting tired of people who supposedly know what
they're doing simply guessing that resinstalling the
OS might solve the issue. It's like trying to dissect
a frog with a sledge hammer, and wondering why you
didn't learn anything about anatomy in the process.
These sorts of things, although bizarre, should be
(and probably are) fixable without major surgery.
Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
Would TechTool Pro detect a bad HD or RAM?
Thanks....

My ipod touch 4g won't turn on, even if i reset it. If i reset it it just brings up the apple logo for about 10-15 minutes, flashes white, then repeats the before mentioned. Has anyone else had this problem and/or know how to fix it?

My ipod touch 4g won't turn on, even if i reset it. If i reset it it just brings up the apple logo for about 10-15 minutes, flashes white, then repeats the before mentioned. Has anyone else had this problem and/or know how to fix it?

Did you try to connect in recovery mode to restore your ipod? iPhone and iPod touch: Unable to restore

HT204406 some of the songs i have downloaded from iclouds cut out after about 50 seconds? Has anyone else had this problem?

Some of the songs I have downloaded from iclouds cut out after about 50 seconds when i play them? Has anyone else had this problem and if so did you manage to fix it.
Thanks

I've had this happen several times... I suspect the download was interrupted for some unreported reason so it only has a partial file or has a corrupt byte in the file it failed to catch.
Just delete the local copy and re-download from the cloud and they play fine.

I am trying to use firefox as the web lauch for citrix ica but when I go to login into remote site - I get the message waiting to find website but it nver finds the website. Has anyone else had this problem?

I am trying to use firefox as the web lauch for citrix ica client but when I go to login into remote site - I get the message waiting to find website but it nver finds the website. Has anyone else had this problem?
When I installed firefox, it asked if I wanted to use safari settings and I said yes but I think this might be causing the problem. Safari is no longer compatible with citrix ica client. When I reinstalled firefox it automatically installs the safari info. Does anyone know how to re-install firfox without installing safari info?

Did anyone ever suggest you reset your PRAM?
http://docs.info.apple.com/article.html?artnum=2238
Also might want to try resetting the SMC, although I
doubt there's an issue there.
http://docs.info.apple.com/article.html?artnum=304123
I'm getting tired of people who supposedly know what
they're doing simply guessing that resinstalling the
OS might solve the issue. It's like trying to dissect
a frog with a sledge hammer, and wondering why you
didn't learn anything about anatomy in the process.
These sorts of things, although bizarre, should be
(and probably are) fixable without major surgery.
Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
Would TechTool Pro detect a bad HD or RAM?
Thanks....

When trying toedit a text message on my iphone5 the edit bubble will pop up but it is no responsive for about thirty seconds before it will respond to the key functions. It just lags behind. Has anyone else had this problem and if so is there a fix?

When trying to edit a text message on my iphone5 the edit bubble will pop up but it is non responsive for about thirty seconds before it will respond to the key functions. It just lags behind. Has anyone else had this problem and if so is there a fix?

I rarely record automation, and when I do I never do a second pass (usually hand draw automation in) but I have had problems with Logic 7 no longer playing back automation. I've been told its fixed in Logic 8, but in the mean time here is a work around.
Select the region where the automation is (if there is no region, create one using the pencil tool and expand it to cover all automation) and go OPTIONS menu -> TRACK AUTOMATION -> "Move current track data to region data." Now everything should play back as expected. If you want to edit the data, simply select "move current region data to track data" and edit away.
For some reason, Logic 7 will sometimes stop reading track automation data, but I have yet to have it stop reading region automation. This is a bug, and according to other users, has been fixed in Logic 8. Hope this helps until we eventually upgrade

HT1430 my ipad randomly shut off and when i go to turn it on it shows a cord connecting to the itunes symbol. my ipad is not disabled by the way. has anyone else had this problem? if so does anyone know how to fix it?

my ipad randomly shut off and when i go to turn it on it shows a cord connecting to the itunes symbol, my ipad is not disabled by the way. has anyone else had this problem? if so does anyone know how to fix it?

Glitchs like that sometimes happen
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If sit still reocurrs a lot, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT4623 I keep getting an error message "cannot connect to the internet." Is this a problem with my internet provider, or has anyone else had this problem.

I keep getting an error message "cannot connect to the internet." Is this a problem with my internet provider, or has anyone else had this problem.

I get that problem once in a while and I will not be able to connect to the Internet with any of the 5 or 6 (or 7 or 8 ) web browsers that I use on my iPad. The one thing that I do that has never failed to work for me is to close all apps on my iPad and reset the device. I can't guarantee that it will work for you, but this works for me every time I get the server failed to load/can't connect to the Internet message.... Or whatever the exact message is.
If you have a ton of apps in the multitasking display, it can take a while to close them all, so you could just trey resetting the iPad first and that might be all that you need to do.
Closing apps in iOS 7 works like this. Drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I recently downloaded the latest version of SnowLeopard and now I can't open any pdf files. Has anyone else had this problem?

I recently downloaded the most recent version of snow leopard to my imac. Now I can't open any pdf files. I just get a dark gray screen when I try to pull one up. Has anyone else had this problem? Please advise.

See TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
tt2

When I go to my downloads folder on my dock and click the file all the content shows up but as soon as I go to open it in the finder, I get a blank window. Has anyone else had this problem, if so, How do you fix it.

When I go to my downloads folder on my dock and click the file all the content shows up but as soon as I go to open it in the finder, I get a blank window. Has anyone else had this problem, if so, How do you fix it. I also cant delete anything from this folder because of it. Any help would be greatly appreciated.

Hey Allen,
I am having the same issue here in September. How did yor situation get resolved. My iPad Siri works great. My iPhone 5 Siri has been out of comission (OOC) for almost a month and I am beginning to get a little frustrated since Siri works so well in July....ANY assistance would be highly appreciated... Thanx

I have the latest version of Pages 5.2 but I keep getting a message saying I must download the newest version to open my file, has anyone else had this problem?

I have the latest version of Pages 5.2 but I keep getting a message saying I must download the newest version to open my file, has anyone else had this problem?

You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.01 can not open Pages 5.2 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Once opened and saved in Pages 5.2 files can not be opened in Pages 5.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

After upgrading to iOs 5.1 the AV composite cable don't work, appear a message: the device is not compatible with iPad2, anyone else had this problem or have a solution for it?

Similar Messages

Maybe you are looking for