After upgrading to iOS 7 on my iPhone 5 recent calls are not showing
Any ideas on how to solve this problem?? At first it was working fine but suddently all the recent call info dissapeared and you don't know how much you use it until it is gone... As with everything.
You got it downloaded and I assume you mean it is installed as well. It was buggy for me.
I had to close and restarted iTunes before I could use it properly.
Then, I had to unplug and replug in my phone before it recognises it.
Just had to try everything. As final choice, update over the air. I try to avoid it as it tends to have more problems than a tethered update.
Similar Messages
-
After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise
Hey ahmedfromtanta,
Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Wi-Fi networks and connections
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.
I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.
-
After Upgrade to iOS 8 the iPhone 5c start freezing, battery life is too short, and to open an app it as to restart the phone.
How to downgrade to iOS 7.
Thanks,
<Re-Titled By Host>Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device without using any backup would be the next step:
Use iTunes to restore your iOS device to factory settings - Apple Support
Maybe also take a look at this page about battery drainage -
I purchased a bunch of songs on my iPhone but they are not showing up on it my computer.
I purchased a bunch of songs recently on my iPhone but they are not showing up in iTunes on my computer. They have always shown up in the past but these few haven't. I usually do a manual upload and backup of my phone, as opposed to doing it via icloud.
In the meantime, I went to the purchases for my account and see that they are listed there and I hit "report a problem". But it doesn't even ask me what the problem is....
Is there anything else I can do?Go to View->Account and verify you're logged into the same AppleID as the iPhone
Then go to iTunes->Preferences->Store and verify that "Show iTunes in the Cloud purchases" is checked. -
my birthday events for only some of my contacts are showing up twice in my iPhone. They are not showing up twice tho on my iMac. No, I do not have duplicate names in my address book either. Any idea how to fix that?
I have uploaded the InDesign file so that you can take a closer look at:
http://www.hsdesign.comuf.com/downloads/
The file is called "Template_File.indd"
So, as discussed the main issues are:
1) The TOC doesn't generate all the listings (only those with the applied paragraph style "Heading 1 - Appendix")
2) When I try to create a new pargraph style and apply it to existing or new text, it reads the pargraph style in the Paragraph Style menu, but the style doesn't actually apply.
Hopefully you can figure something out from this. I really appreciate your help.
Thanks! -
My Iphone calendar events are not showing up in iCal when I sync? Syncing has not been an issue till today?
I found this tip from a 2011 discussion on the same topic.
Open iCal and backup or export your entries. Make a note of the fie name and location, you're going to need them in a minute. Once your backup/export is completed, close the iCal application.
Open Finder and remove everything inside the "Username/Library/Calendars" folder. For instance, if your username is "Joe", then move everything inside the "Joe/Library/Calendars" folder.
Open the iSync application. It's located in the "/Applications/" folder. Once iSync is opened, go into the iSync Preferences (iSync -> Preferences) and push/click the "Reset Sync History" button. Then, close the iSync application.
Re-Open the iCal application and Import (File -> Import) a new calendar. When prompted, use your notes from Step #1 to select the file your created earlier. Once completed, close the iCal application (you should have all of your calendar entries back.)
Open the iTunes application and connect your Apple iPhone to the computer.
Within the Advanced section of the Info tab for the Apple iPhone, check the box the overwrites/replaces the Calendar data on the Apple iPhone.
Click the Apple/Sync button. New, modified and deleted entries should now be syncing correctly.
That's it! You should be all set and iTunes, iCal and our Apple iPhone should all be playing nicely as friends again. We've used the exact method to repair our own Apple iPhone at least once... maybe even twice. -
What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.
It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier! -
On iOS 6.1.3 this can be done without any problem. I have an iPhone 4 that was working perfectly for this function using iOS 6.1.3. After upgraded to iOS 7 / 7.0.2, the iPhone does not show any error on the screen.
This is a user-to-user forum: you aren't talking to Apple here.
I do sympathize with your situation: you are among many for whom upgrading is impracticable, but who are dependent on MobileMe facilities which will be withdrawn next June.
As you say, you will need 10.7.2 to access iCloud on a Mac, and iOS5 for mobile devices.
I can't offer you any easy solutions, but this list may at least clarify the exact situation for you:
Your email, calendars, contacts and bookmarks, and 'Find my iPhone' will be migrated to iCloud.
Your iDisk, together with website hosting and Gallery. will continue to work as before until next June.
You will be able to access email, calendar and contacts on the iCloud website at http://icloud.com provided your browser is reasonably up-to-date.
You will not be able to sync contacts or bookmarks from a pre-Lion Mac.
You will be able to enter the server settings for email manually in the Mail application and access your email.
You will not be able to sync your calendars directly.
Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. BusyCal is an iCal-like calendar application with extra facilities: it can sync with the iCloud Calendar while running on Leopard, Snow Leopard or Lion.
There appears to be no method of syncing contacts (though Address Book on a Mac can be synced with Google or Yahoo address books - I don't know how reliable this is). -
Problems with current location after upgrading to IOS 5 for IPhone 4
I have an Iphone 4 and upgraded to IOS 5, but now my current location isn't working? Any suggestions?
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as NEW.
Go through these steps sequentially until your problem is solved. If after these 4 steps you're still having problems, then you likely have a hardware issue and will need to bring your phone into Apple for replacement. -
After upgrade to ios 6.1 cannot make calls
I upgraded my phone to IOS 6.1, now my phone is gone and I can not make calls or receive calls. Tried reset that did not work. Any ideas?
Same problem
I recently exchanged at Apple Store my iPhone 3GS, which had been desimlocked.
I changed carrier yeserday - phone was OK.
After upgrade to 6.1 later in the day, the phone was simlocked on the former carrier ! -
BB Passport: After upgrading to 10.3.1, the USB key are not seen by the OS
Blackberry Passport:
After upgrading to 10.3.1 Any kind of USB key is not seen by the OS, even after restarting the operating system.
With original OS 10.3 could connect USB key to transfer my photos with file manager.
Any suggestions?There a lot of issues being discovered by users doing the upgrade OTA or using Link. And they are varied. It's had to say whether your problem another of these issues or something else. Those I trust are recommending a clean OS install using an autoloader as so far there are not the same problems afterward.
You could try the autoloader route. Do a backup first. After the clean OS install, test before you do a restore and install app. If problem is gone, then you know the clean OS works. The next question will be if the problem returns when you restore or add apps.
- Ira -
I think this happened after upgrading to lightroom 4.2, but I am not sure as I haven't used Lens profile correction in some time.
When I enable the "Enable profile corrections" checkbox in "lens corrections" The Make and model of the lens is recognized, but the profile field has only 2 optoins, "canon EOS 1D MK III" and "Adobe". It does not have any other options including the EOS 7D that I use. Tried uninstalling and installing again, that didn't help.
I found in the forum that for Win 7, lens profile is supposed to be stored in "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0", in my case the LensProfiles directory does not exist. There is a CameraProfiles directory(C:\ProgramData\Adobe\CameraRaw\CameraProfiles).
How do I solve this?There is nothing wrong with your lens profiles.
The issue is that you are adjusting a JPG not a raw file. When adjusting raw files the camera model is not listed with the profile because it doesn’t matter and all of them say Adobe as their source for Canon cameras at least, but when adjusting JPGs the camera may have done certain adjustments internally so it does matter and is why you see the wrong lens-distortion occurring when choosing the 5D Mark III profile with your 7D JPGs.
For the record, I have profiles in both the locations mentioned: under Program Files\...\CameraRaw and under ProgramData\...\Lightroom 4.x. This makes sense because I have both Photoshop CS6 and Lightroom installed. The ones under Lightroom are all dated 12/2012 while the ones under Camera Raw are mostly dated 2/2012 with some from 11/2012 and other dates. The profiles are probably the same, but the Camera Raw ones retain the date of the original profile creation whereas the Lightroom ones all get updated to the same date. Lens profiles can also be installed with the DNG Converter, although I'm not sure which of the two locations those install to. -
After upgrade to Aperture 3 last year, combined albums are not recognized
On many events, I work with a second photographer who does his own editing of his raw images. To combine our work in the previous version of Aperture, I would import the other photographer's Aperture project, create Albums within my Aperture project and combine photos from the 2 projects (drop the photos from both projects into the Albums), re-order and edit them as needed.
With the upgrade to Aperture 3, I re-imported the Library/Projects, and the Albums appear but do not include the combined images from second project file? This would mean that I lost all of the hours spent re-ordering 8-10 events will need to be re-done for a final export.
Has anyone else experienced this issue, and is there any way around having to re-do all of that work?Liz,
when you view your first Library 1 with the combined album that appears to be empty, what is the number of items beside the album?
(to turn on the display of the number of items open the Aperture Preferences and enable "Show number of versions for projects and albums in the "Appearence" tab).
This will tell you, if the versions from your second project really are not included in the library or are only hidden.
Do you see your project from the second library when you click on the projects view button or is the second project missing entirely?
If the second project is there but looks empty, and if the album has more image versions than shown, then look at the search fields and check, if you have any filters set that hide the images. The search field in the Brower pane should show "Showing All", the search field in the Library Inspector should show "All items".
Are your master images referenced or managed? And if they are referenced, did you move your libraries/projects recently? Can it be that your images from the second project are not included in the first library beause they are referenced and on an external drive?
Regards
Léonie -
I just upgraded my iPhone 4 and iPad Mini to iOS 7, suddenly they both can no longer access to iTunes nor App Store. The message says "Cannot connect to App Store". After some research, I did reset all, and still the same. Can anyone have a clue? Thanks,
As I mentioned earlier, when I clicked on the App Store or iTunes Store, the message reads "Cannot connect to iTunes Store" or "Cannot connect to App Store" depending on which I clicked.
I did check iTunes & App Store, it used to show my Apple ID there, but somehow it shows empty there. I then manually typed in my Apple ID, it just won't work. I know for sure that my Apple ID works as I tried logging online using that ID fine, but my iPhone and iPA
Thanks,
Maybe you are looking for
-
Unable to send email POP3 email from Outlook 2013 unless signed on as local admin
Windows 7 Outlook 2013 I recently upgraded from Office 2010 to 2013. For several weeks everything ran smoothly but a few days ago I noticed that my Verizon POP3 account was unable to send mail - items just sit in outbox. I have deleted/added the ac
-
Trying to reuse my 1TB HD which was in my iMac as an external bootcamp drive
I've read that bootcamp will not function from an external HD. So here's my question. a few weeks back, my iMac's main 1 TB HD failed; i took it to an Apple approved vendor who installed a new 1TB HD. (call this HD:new) (The problem: it wouldn't boot
-
Where is the home/application support/address book folder in Lion? Can't find it to put in a backup. I made a mistake. I want to find the home/library/application support/address book - not the application itself. The whole library is not there -
-
AnyConnect VPN Client on IOS Router
Hi Guys, I configured AnyConnect SSL VPN on Cisco 2811 router. It works perfectly when I login via web and run secure mobility client. However, when I connect directly from the mobility client connection fails. It does not even ask me for username an
-
How do i connect my MX432 to my HTC phone?
I am trying to "find" my printer on my home wifi and my HTC phone can't locate it. Do i have to do something to make my printer visible for the phone to find it?