After upgrading to ios5.0.1 cannot connect to wifi
After upgrading to ios5.0.1 iPhone can find wifi but cannot connect for more than a few seconds. Have tried turning off "enable 3G"and wifi will connect for few seconds then will lose it. After turning "enable 3G" back on it will briefly connect to wifi then drop. Have tested wifi with older iPhone which has no problems connecting. Have tried reset and reset network settings. Have also restored iPhone.
You need to contact Citi -> they may have not updated their extension yet
Similar Messages
-
Upgraded to iOS5 and now cannot connect to iTunes Store
After upgrading to iOS 5, I cannot connect to the iTunes Store. I was having the problem at home where I was connected to my home network, and now when I'm not connected to a network.
Suggestions?This appears to be an Apple ID issue. I was forced to change my username to my email (which I had already done years ago) after searching and searching for reasons why my password all of the sudden didn't work on my iPhone. This started about 3-4 weeks ago.
So my password needed to be re-set when I tried to access my iTunes on my computer, and my iTunes balance disappeared. My username was still my email address (as it had been for years) but my gift card balance was gone and so was ownership of all my apps and music
Now, after upgrading to iOS5 my ONLY Apple ID now works with the re-set password, but it lost all of my apps. They are there, but when I go to update them through the iTunes store, I get that "cannot connect to itunes store" error message because after that weird 'update' to my Apple ID it seems to have lost all history I've had with Apple.
This is so upsetting, as I'm finding out that Apple does not allow recovery of these purchased items between these ID's. So, now I'm wondering where in the heck is my "old" apple id?? I can't sign in with my "old" info....
Lame. -
Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access. It will connect if I connect to my iPhone hot spot via wifi. Any ideas?
If you follow this video you'll see how to delete your WiFi AP from the OS, this will allow you to select it again which I feel will correct your problem.
https://app.box.com/s/fe7v7h7kywjr23spumqp -
I have upgraded to safari 5.1 through auto update
After restart the safari does not connect to any server saying it cannot find them
other browsers such as Minefield work fine and the internet connection works fine
The computer is connected via airport to a router, firewall is active.
Safary 5.06 worked without any glitch
any ideas?I have the same problem but im on Lion, All my web browsers seem to work perfect but not Safari. : (
-
After upgrade to 10.6.5 cannot connect to a port
Let me apologise upfront - I don't speak the Apple language but need some help. I have upgraded to 10.6.5 (tried update and then also combo). I need to access my work e-mail remotely. This was not a problem before upgrade. It accesses via a port on the work server. I get to the stage of having to enter my password, which the system now says it does not recognise. I have ruled out internet provider. I connect via a speedstick modem with sim card. I can access the work mail no problem on my PC laptop as usual. It worked perfectly prior to upgrade. Anything I can try? Thank you.
Of all my devices, the problem is only associated with an early MBP (2006) 15". I don't have the problem with recent devices, nor with the desktops. Over the past coupla days I tried all proposed solutions, but so far nothing really persisted.
One observation I have has to do with the number of bars indicated by the AirPort display in the menu bar: its always full at 4 bars :-/ Previously, I had areas in my house where the the reception was at 1-2 bars, but not now: its a full 4-bars! This kinda brings to mind the bar-problem that was fixed by Apple after the introduction of iPhone 4. -
I have been having intermittent/no wireless success on the 5GHz band of my Airport Extreme. I'm on an iMac early 2008. It was working fine before upgrading to Mountain Lion. I have tried many things (deleting the wireless network, readding it, changing settings on the AirPort Extreme, deleting the 5GHz network on that and readding it, running diagnostics) but nothing has fixed it. I can switch to the 2.4GHz band and it works flawlessly. This must be a software problem since it only started happening when I upgraded the OS.
Any help would be appreciated. Thanks!No it isn't, I have tried 4 different mountain lion machines connected to a 5Ghz and it works just fine. It is with your machine hence we need to fix it
create a new location and see if that fixes your issue, If not trash Macintosh HD/Library/System Configuration
That is a folder so trash it > restart the computer > create a new location -
When I click on Firefox I see restore session but no options to do so....cannot get firefox to load....it just sits and tries to run but will not load....I have uninstalled Firefox several times and downloaded with NO luck...help!
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls -
AFTER UPGRADE TO IOS6.1, IP5 CANNOT CONNECT 3G. ***! HELP!
For the life of me, the iPhone 5 just does not have 3G or Edge after the ios upgrade to ios6.1. *** Apple! DO NOT RELEASE AN UPDATE TO SCREW UR USERS! ***!
WHAT IS UR SOLUTION???Of all my devices, the problem is only associated with an early MBP (2006) 15". I don't have the problem with recent devices, nor with the desktops. Over the past coupla days I tried all proposed solutions, but so far nothing really persisted.
One observation I have has to do with the number of bars indicated by the AirPort display in the menu bar: its always full at 4 bars :-/ Previously, I had areas in my house where the the reception was at 1-2 bars, but not now: its a full 4-bars! This kinda brings to mind the bar-problem that was fixed by Apple after the introduction of iPhone 4. -
I cannot edit my contacts after upgrading to IOS5 .
I cannot edit my contacts after upgrading to IOS5 . I can restore to factory settings but I want to keep my messages as they were.. what can I do? please someone help.. thanks in advance.
HI MortenEJ,
Thanks for your responce.but already done doing "Restore factory settings" .. and when Im doing "back up from" ..
I still encounter the same problem. I have important messages in my inbox I want to keep.
I even try to upgrade to the newest version. IOS 5.0.1. but still the same..My main problem is my contacts. I dont have "+" add contact button and inside each contact.. I dont have the "edit" button.. -
I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
I wiped it out and restored from backup but I am still getting the same message.I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
~~~
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
~~~
Good Luck!
~R -
Can't connect to 3G network after upgrading to ios5.1 on iPad2.
Has anybody exprienced this after upgrading to ios5.1 on the iPad2? I can't connect to 3G network at all. It keeps giving a message of "You are not subscribed to a data network:. But I still have data left this month on my cellular contract.
Hi Miky. After upgrading to ios 5.1 I had the same problem.
I reset the APN on network settings and rewriting the same. iPad now working on 3G.
My operator is 3 ITA
iPad 1 64 GB Wi-Fi + 3G -
After upgrading to Yosemite, I lose my connect in SOAS, university of London. Overtime, it rejects me as Authentication fails in this network. Even the school technicianer cannot fix. I wonder how to downgrade or any solution? I never encounter this issue with Mavericks or the one before.
I also have the internet diagnostic report, but it is nonsense to me to read it.
-
After upgrading to Itunes 10.5 and connecting the IPAD. I get a following message. How do I resolve this issue. There is no other way to download itunes to ipad other than the itunes on your computer or laptop. I am a windows xp user.
Dear Mr. Sawyer,
To my surprise, the version is shown as 10.0.1.22. I will uninstall itunes and try loading the same again. After uninstalling do we need to delete any registry entries for Windows XP.
Thanks for your response and concern.
Regards
Amit Samel -
hello iupgrade ipad to ios7 after the upgration not conect to wifi and shows the message connot able to connect i do every things that i read on apple forum but at this moment cannot connect to wifi my wifi modem is tp link
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
I upgraded to iOS5 and I cannot synch and I cannot get registration email from icloud
How do I synch when my ;aptop will not talk to my iphone via usb but will still charge
This appears to be an Apple ID issue. I was forced to change my username to my email (which I had already done years ago) after searching and searching for reasons why my password all of the sudden didn't work on my iPhone. This started about 3-4 weeks ago.
So my password needed to be re-set when I tried to access my iTunes on my computer, and my iTunes balance disappeared. My username was still my email address (as it had been for years) but my gift card balance was gone and so was ownership of all my apps and music
Now, after upgrading to iOS5 my ONLY Apple ID now works with the re-set password, but it lost all of my apps. They are there, but when I go to update them through the iTunes store, I get that "cannot connect to itunes store" error message because after that weird 'update' to my Apple ID it seems to have lost all history I've had with Apple.
This is so upsetting, as I'm finding out that Apple does not allow recovery of these purchased items between these ID's. So, now I'm wondering where in the heck is my "old" apple id?? I can't sign in with my "old" info....
Lame.
Maybe you are looking for
-
Unit Test Validation for Output Ref Cursor Not Working
Here is the problem: I have a stored procedure as follows: CREATE OR REPLACE PROCEDURE usp_GetEmployee( p_employeeId IN NUMBER, cv_employee OUT Sys_RefCursor ) AS BEGIN OPEN cv_employee FOR SELECT * FROM employees WHERE employee_id=p_employeeid; END
-
How to enable the search option for a column in an old report
Hi , I created the report. It works fine. I remember while creating the report, at one step, I was asked to sort, search column level (check option) . I skipped that option at that time. But now I want to check/ enable them . So, how and where to do
-
How to create 2 transaction codes for same report program with diff title
Hi All - I have created report program and create 2 transaction codes with different short description. I want to display the Tcodes decriptions instead of program attributes title. Can anyone pls tell me how to do this? Thanks, Kannan
-
Combine PDF is no longer working. What do I do?
After a number of unrelated application add/deletes, I no longer have the function of certain Adobe functions such as combine PDF and printing as a PDF is no longer an option on programs such as Internet Explorer and AutoCAD. I have already tried rel
-
Why is query builder deprecated?
Why in the world did Oracle depracate Query Builder??? The query builder component in Report Builder is a poor substitute since it doesn't allow you to run the query (except as a report), and you can't save the query as a file. Query builder is one o