After upgrading to iOS5 the camera is not working

Hello,
I recently updated my iPhone 4 to iOS 5, everything seems ok but I can't take pictures anymore the lens doesn't even open.
Any help is appreciated

I have same problem with the camera after upgrading my iphone 4 to ios 5. I can open the photoapp and focus but the app closes after the shutter goes black. I have tried reinstaling ios 5, but I still have the same problem. And I cant open the photoalbum eigther.
Can I downgrade to ios4?

Similar Messages

  • After uptade to ios5 my camera  does not work

    after uptade to ios5 my camera  does not work

    I have the same issue. I upgraded to ios5 then the camera was frozen and no longer works. I took it into an Apple store and they said I had some hardware damage that look to be consistent with moisture getting in through the headphone jack. I accepted that answer and went on my way since my warranty was over 100 days past and I did not feel like paying $100 for a repair with the 4s upgrade avaible with my account soon. I started to look at some other apps that use the camera, the Facebook photo share in the FB app, the amazon bar code scan, camera+ and they all work. There is definitely some kind of software bug with ios5, based on my experience, that freezes the camera. I would suggest taking it into apple to have it looked at or just using a camera app like camera+ to take pictures.

  • The zoom in the cam its not working after downloading IOs5

    HI
    after downloading after IOS5 software the zoom of the cam its not working and also the option of opening the cam from the lock screen also not avilable

    Once you see the lock screen, you have to double-click the home button to access more controls.
    Not sure about the zoom. It works for me :/

  • After upgrading to Lion internal mic does not work with Facetime

    After upgrading to Lion internal mic does not work with Facetime.  The mic is picking up sound as noted in System Prefs.  This was working just fine before the updgrade.  Facetime works OK on my iPod. 

    you have in french a tutorial to recreate your partition here
    Rebuild partition with Recovery HD lion after upgrade to 10.7.2
    i tested, it's work !
    For your wifi problem:
    Try to change your setup of wifi, look this table given by apple:
    I changed my wifi setup wep to wpa and it's work !

  • After upgrading to Lion Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    After upgrading to Lion, Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
    Didn't used to be this way before Lion/10.7.
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • HT4285 my ipone 4s is only 2 months old and now the camera is not working at all , may i get a replacement new handset ??

    Dear Sir,
    Im pay monthly customer via O2, and i got my iphone4s at the end of Feb, and now the camera is not working at all...I ve been using iphone for years. Had iphone3 and 4 for past few years and never had problem with camera, this one its the 1st one, and i feel very inconvenient with the such a good phone but couldn't use the camera at all.

    Just talking to fellow users here.  Call applecare or take it back where you bought it.  It should be in warranty.

  • I updated my iPad 4 iOS 8.0.2 and the camera does not work, ... Please help

    I updated my iPad 4 iOS 8.0.2 and the camera does not work and hangs and unconnected, .... Please help me in this question,... Thanks in advance

    You're welcome, but I didn't do anything. Try closing the camera app completely and reset your iPad and maybe that will help.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I bought my iPhone5 4 months ago and now the camera is not working, it only displays black in the screen. I've tried reset, restore for how many times but still the problem is not being resolve. Any help from you Apple team?

    I bought my iPhone5 4 months ago and now the camera is not working, it only displays black in the screen. I've tried reset, restore for how many times but still the problem is not being resolve. Any help from you Apple team?

    There is no Apple here, this is a user to user forum.  When you said you restored, then you restore as NEW?
    If you restored as New and still the problem persiist, then it time to take a trip to the Apple store.

  • What should I do if the camera's not working and mac can't find it?

    The camers's not working. When I open Photo Booth there's a line says "Camera is not turned on". The same thing in other programs deals with camera. What should I do?

    You should be able to select Force Quit from the menu beneath the Apple icon in Finder
    and choose to Quit iPhoto from there, without messing up the Mac OS X in the process.
    OS X - Support
    Not sure if rebuilding the iPhoto library would help this issue. However if you had to
    turn off the computer without the correct method (unplug, etc; instead of menu choice)
    the system may have accrued damages and should be checked, maybe repaired by
    use of the Disk Utility in the system. Or restart the computer in Safe Boot mode, then
    run 'repair disk permissions' while it is running in that reduced mode; then restart after.
    •Understanding Safe Mode - tuts+ computer skills tutorial:
    http://computers.tutsplus.com/tutorials/understanding-safe-mode--mac-59897
    •OS X: What is Safe Boot, Safe Mode?
    Suggestions on how to use Safe Mode in article, to resolve issues, may be helpful.
    There likely are other means to rectify troublesome applications, including reinstall.
    Be sure to backup your music, image, video, and other work on an external drive
    or suitable device as a precaution against loss should there be a hard drive failure.
    iPhoto - Mac Apps - Apple Support
    There should be some tips and help information using iPhoto via this tiny Support link.
    Good luck & happy computing!

  • The cam is not work

    the cam is not work

    Restore iPhone with current iTunes on computer. If after the Restore on computer, there are still problems, make Genius reservation or set up service and take or send iPhone to Apple for resolution under the 1 year Warranty.

  • Updated my phone 4s and the cam is not working now

    updated my phone to 7.1.1 and now hte cam is not working neeed help fixing issue

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • I bought a iPhone from Apple store but the camera is not working

    I bought an iPhone from Apple store less than a year ago but the camera doesn't work anymore ?

    Contact AppleCare: Contact Us

  • After Upgrade to lollipop, the camera stopped working

    Hi, I have upgraded from two days my Z3 Dual software to lollipop 5.0.2 After completion, the camera stopped working. I have applied repare through PC companion and it is still shows the following error: Error
    Camera not available. I have restarted in safe mode but the same problem. I tried many option like factory reset but no use. Can any one help in this matter? Regards
    Bakr

    Try Clearings the camera app data.
    How to clear data on apps.
    From your Home screen
    1. Tap the Application screen icon.
    2. Find and tap Settings > Apps.
    3. Swipe to the All tab.
    4. Find and tap on the camera app.
    5. Tap Force stop > Clear data.
    6. Restart the phone

  • (HELP!)After upgrading to Mavericks, windows xp is not working

    I have upgraded to Mavericks.  But now I can't get into windows xp.
    what I usually do is hold on to "option" to get into XP. 
    instead have" MAC" " Windows"  I have a third disck called " recover 10.9"
    I then choose to open via Windows.  It then ask me to go to safety mode or normal mode to start up.
    It doesn't matter which one I chose, It will go to normally Windows openning screen and then quickly turn in to blue screen.  Before I have the change to see what it says, it will go straight to restart. 
    How can I go back to Windows? without converting Mavericks back to my original mac version?
    If the only way is to go back to my old version.
    My time machine says that I don't have enough space in mac disc to do restore?  if I delet everything I have in Mavericks, will it give me enough space?  I have back up in time machine so it should be ok if I delet all my photos and musics.
    and the most imprtant thing is will it make XP working again?

    I have same problem with the camera after upgrading my iphone 4 to ios 5. I can open the photoapp and focus but the app closes after the shutter goes black. I have tried reinstaling ios 5, but I still have the same problem. And I cant open the photoalbum eigther.
    Can I downgrade to ios4?

  • After upgrade to Snow Leopard, Time Machine not working

    Hi all,
    About two days ago I upgraded my MacBook 4.1 to Snow Leopard.
    Now Time Machine cannot backup to my external HDD anymore. One error message stated that it would not fine the settings file.
    Please help.
    What do I need to do to get my backups working again?
    Thank you

    Pondini - I have an issue too. And so I went to the troubleshooting tips you listed here and was not able to find a solution. Specifically, I don't get a message. I plain ole don't get nothing. After I installed Snow my first backup failed. Funny thing is the backup on my wifes computer also failed. She does not have an Intel Mac. It's a PowerBook G4. Hence no Snow Leopard there. I have a iMac 24 Aluminum. My Time Capsule backup worked fine until Snow. My TC is wired via ethernet. There is no latest date. When Time Machine backup starts the TM preference pane says it's "Making disk available" Something to that effect. And that's where it stays. If I then try to do anything with the preference panel - like close it - I find out the Preferences are not responding. So I force quit. I try to stop Time Machine backups and it's no good. The TM indicator - that little backwards running clock - in the menu bar just keeps on it's merry little way. The only way to stop it - shutdown. Strange thing is shutdown then refuses to - well, shutdown. I end up having to hold the power button for 5 seconds. I don't get error messages. I get nothing indicating what may be causing this problem. I have been searching these and other forums looking for an answer. I had hoped the user tips you listed would have a solution, but, alas, no. I deleted the timemachine plist in the "higher" library. No luck. I have powered down everything. No luck. Those were two ideas I saw that said they worked. So where do I go from here? Where do I look for error messages that will point me in the right direction? I'd appreciate any help from anybody.

Maybe you are looking for

  • Problems syncing BB Bold to Google apps email

    I have a BB Bold 9780.  I have my personal gmail account synced to it and previously had my work email synced to it through Outlook.  I just started a new job and deleted the old email sync.  However, my new job uses Google Business Apps and I cannot

  • What does the 'Other' summary mean in iTunes

    whenever i sync my ipad to iTunes i always see the yellow bar that represent 'other' taking up quite a lot of space, so i'm wonder what does it mean. i have a lot of ebooks/files in the ipad is it because of this that i have about 1+GB of other space

  • Get error message when verification word entered

    When I enter a verification word, (the series a letters and numbers in the box with lines to deny spamming software) I get a message that says I have entered it incorrectly. It used to work on my iphone but no longer does, I guess since one of the up

  • Oracle 9iAS v1.0.2.2.1 iSetup.exe file

    Hello! Could anyone arrange me a copy of a working iSetup.exe file for Oracle 9iAS v1.0.2.2.1, because the one that i downloaded does not work at all when i double click on it! I downloaded the iSetup.exe file that corrects the CD-ROM problem, but i

  • How can I run scripts in CP 8 on a timely bases.

    In CP 8 I want a script to run every second automaticaly, how can I do this? The reason for this is that I want the application that I build to check for the GeoLocation every second, so that the arrival at a location that is entered as a variable  c