After upgrading to iTunes 8.0.2, iTunes won't open at all

I used to use iTunes 7.0.4 and recently tried updating to 8.0.2. Once I installed the new upgrade, iTunes won't open! I double click, use the Run feature, etc etc without any luck. I also tried to re-install an earlier version of iTunes but for whatever reason that won't download correctly. I am hesitant to un-install and then re-install for fear of losing my entire library - any suggestions??
Thanks so much in advance!

Had the same problem with the new update. I finally got back to my previous version by using system restore. After the restore I had to go to the "All Programs" list and click on Quicktime and iTunes individually to allow them to re-configure, then had to restart the computer again. After that all's well. My lbrary was intact.
I tried everything to get the newest version to work, including completely uninstalling my current versions of QT and iTunes, then downloading the latest directly from the Apple website, but, after 3 attempts, nothing worked. Guess I'll have to wait for the next update and try again.
By the way, your library is not actually stored in iTunes--it is stored in your Music folder, so you should not lose anything by uninstalling iTunes if you need to.

Similar Messages

I upgraded my itunes yesterday and now it won't open at all...

can anyone help? I don't want to lose my music. thank you...

Hi, JEvansIII.
Thank you for visiting Apple Support Communities.
Try resetting your System Management Controller or SMC then launch iTunes after processing these steps. If the issue persists, try downloading a fresh copy of iTunes by accessing the second link below.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/en-us/HT201295
http://www.apple.com/itunes/
Cheers,
Jason H.

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

Nicholas...
You may need to restart the Apple Mobile Device.
Follow the instructions here > iOS: Device not recognized in iTunes for Windows

After upgrade to ios7 on iPad mini, iTunes Store shows a blank white page.

After upgrade to ios7 on iPad mini, iTunes Store shows a blank white page. I ve rebooted, restored, reset, still not working.
Also having issues with some of my apps which I use to use every day before the upgrade. Nightmare....
What can I do to solve this problem?

You didn't mention which reset you tried that didn't work ...
Try this reset ...
Tap Settings > General > Reset > Reset All Settings
Then restart your iPad.
Try the iTunes Store.
No data is lost due to a reset.

Downloaded itunes 11.4 upgrade and won't open at all

Hi, I have OS 10.6.8 and just upgraded to itunes 11.4 and it will not open at all.
Any suggestions?
Thanks

Any solutions for this problem? Running 10.6.8 and downloaded the most recent ITunes update I had available but didn't try to run it after installing, went to run it today and now I receive the message 'You can't open the application ITunes because it is not supported on this type of Mac.' and the ITunes symbol is crossed out. Any help would be appreciated.
Also forgot to mention, the Itunes version is 11.4 and it's 10.6.8 on one of the 2008 black macbooks.

After clicking "yes" to the question "do you want to update itunes now", i waited 2 hours and 15 minutes and it was still "loading". i turned computer off thinking something was wrong. now itunes won't open at all. do i need to download itunes again?

after clicking "yes" to the question "do you want to update itunes now", i waited 2 hours and 15 minutes and it was still "loading". i turned computer off thinking something was wrong. now itunes won't open at all. do i need to download itunes again?

Did you actually download the installer from Apple or did you use Software Update. You can download the installer http://www.apple.com/itunes/download/
Maybe I'm old fashioned but I would consider repairing permissions first using Disk Utility because something caused this to go wrong the first time. And of course make a backup of your whole library first. It shouldn't happen but some have complained about their libraries being wiped out by iTunes updates. Better safe...

Invalid Library File - ITunes won't open - AT ALL!!!

hi, need some help! ITunes won't open, at all. Have followed Apple's advice to recreate library (by locating library.xml and moving it to the desktop, while trashing the ITunes library.itl file)ITunes still doesn't open. Connecting Ipod to laptop does nothing either! Any advice would be great!
3G Windows XP

Hey try this out:
Turn Norton 2005's Personal Firewall OFF, (turn it OFF Permanently until your ready to turn it back on) then click CONFIGURE.
Under the PROGRAMS tab remove any reference to Apple iTunes or iTunes or iTunes Helper Module or anything related. and reboot.
After coming back go back to Norton 2005's Personal Firewall, click CONFIGURE. Under the PROGRAMS tab click ADD at the bottom, a SELECT A PROGRAM
window will pop up. Add the following files one at a time, iTunes.exe, iTunesHelper.exe, QuickTimePlayer.exe, qttask.exe, QTInfo.exe. The last 3 are found
in your Quicktime folder where that is in your system. Click OK. Turn Norton 2005's Personal Firewall ON, and try starting iTunes again.
This worked for me. It seems the Quicktime files were never automatically entered into my Norton 2005's Personal Firewall allowable programs listing. Adding them
manually should help. I also noticed that from my previous version of iTunes the program listed in the Firewall was named Apple iTunes and not iTunes after I upgraded to 6.
Let me know if this works out.

My ipod touch version 4.2.1 is not recognized by Windows 7 after upgrading i tunes to 11.2. I have gone through all the trouble shooting suggestions twice

My ipod touch version 4.2.1 is not recognized by Windows 7 after upgrading i tunes to 11.2. I have gone through all the trouble shooting suggestions twice

Did it work with previous ii.x version?
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

ITunes 10.5.2 it won't open

Just updated to iTunes 10.5.2 and now it won't open at all. I double click on icon and nothing happens. Have uninstalled and reinstalled please help I need to get my new iPhone 4s up and running

I'm seeing similar behavior where iTunes crashes and I get the "Quit unexpectedly" error. In my case, it works fine for a while and then crashes without any apparent cause. I can't detect a pattern to the failues and I can't cause it to fail - sometimes it quits mid-song, sometimes it crashes when it is paused. It happens repeatedly, i.e. it's completely unstable.
I am still running Snow Leopard v.10.6.8, so it isn't just a Lion issue. I now realize that the problem first appeared about the time I upgraded to iTunes 10.5.2 but since I was having some other issues at the same time, I didn't immediately recognize it as a SW issue with iTunes.
Last week I did a clean install of OS X Snow Leopard after a full format of my HD and the problem with iTunes still persists. I have logs of the last 5 crashes if anyone wants to try to make sense of them (I sent one set to Apple already).
This is a real PIA that I hope gets some quick attention.
Mac Pro 2.53 GHz, dual core, 4GB 1067 RAM, OS X 10.6.8, iTunes 10.5.2

ITunes won't open at all... only error messages

hey guys,
no idea what's going on with my iTunes its really annoying though here's the scoop i got a lot of bad crap on my comp. so i had it formatted by a guy at work came home installed itunes opened it up it worked great all the sudden it closes itself and now it won't open at all i've redownloaded it at least ten times... nothing works... soon as i click on the iTunes icon it says iTunes has encountered a problem and needs to close i sent the error report and it said Apple had a solution to my problem.. but after hours of searching i have found nothing so i'm just going to post this up hoping someone knows whats up (um just for some info i went to my add/remove hardware and quicktime wasn't in there... that's not right i think someone let me know lol)
any help would be much appreciated really wanting to update my new songs on my iPod

No thats not right, iTUnes uses parts of quicktime to play audio and video. You need to go here and download the stand alone version of quicktime. Now apple has recently changed this page to include quicktime with iTUnes and then qwuicktime only. get the one WITHOUT iTUnes,
http://www.apple.com/quicktime/download/win.html

My itunes won't open at all and has the Error message (13014)

PLEASE HELP!
I recently upgraded my itunes to the itunes 9. Now it won't open even if i try with the option key, but i may be doing the wrong thing. It won't even open when i reboot my computer. It was doing fine at first , but now it won't let access my music at all. Any solutions? I would greatly appreciate it.

No thats not right, iTUnes uses parts of quicktime to play audio and video. You need to go here and download the stand alone version of quicktime. Now apple has recently changed this page to include quicktime with iTUnes and then qwuicktime only. get the one WITHOUT iTUnes,
http://www.apple.com/quicktime/download/win.html

I just updated my intunes, but now itunes won't open at all? help!

i just updated my intunes, but now itunes won't open at all? help? it says itunes was not installed correctly, so i've reinstalled about a billion times and it still doesn't work

Can you open it from the Applications folder?

Itunes won't open at all in Windows 8

Ever since my computer froze and had to be shut down earlier today itunes won't open at all. When I click nothing happens. I've tried uninstalling and reinstalling everything apple related, restarting my computer, moving folders around, etc. and no solution I've found online works. This used to happen on my old laptop (Vista) but restarting would always make it work again.

Hey ashleighd07!
Here is an article that will help you troubleshoot this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Just updated itunes 10.5 and now it won't open at all please help me

Just updated itunes 10.5 and now it won't open at all please help me

Already a thread about this problem. Check to see if any of the given solutons here work for you.
https://discussions.apple.com/thread/3381033?start=0&tstart=0

Can't access itunes store. no error message but store won't open at all. any ideas? thanks

can't access itunes store. no error message but store won't open at all. any ideas? thanks

i been trying to purchase music and get into my itunes account but error -1202 won't allow me to get into my account or purchase music. I spoken with the so called experts at apple and they've been putting me through the ringer with their suggestions that don't work. i've been purchasing music all before with no problems why all of a sudden this problem? Can someone please tell what to do or give any suggestions as to why this is occuring.

After upgrade to latest firmware canon network printer won't print

after upgrade to latest firmware canon network printer won't print. It's a canon MP540 on a wireless network. It will print a test page but won't print from any application, just sits there with the message 'copying print data'!
Running Mac OS X Lion 10.7.2 (11C74), with firmware SMC Version (system): 1.73f63.
Any help gratefully received.

First off if you can print a test page there is absolutely no reason you wouldn't be able to print from a application...none. But stranger things have happened now that we have Lion. Within the application are you selecting the wireless printer........just had to check.
I have the MP620 which is simlar to your MP540 and have no problems printing from my MBA (June 2011). I too have the latest firmware and software......without problems printing.
A few things I'd try would be to remove the wireless printer from your computer (in Preferences, printers), restart, and repair permissions. Then add the wireless printer back, and see if it works. If not.....power OFF the printer and turn back on.
If the above fails reinstall the printer driver (yours) I think you will have to plug in the USB cable.
Keep me updated and I'll tyr and help!

After upgrading to iTunes 8.0.2, iTunes won't open at all

Similar Messages

Maybe you are looking for