After upgrading to Leopard on iMac, I cannot login.

I have gotten my iMac barely yesterday. It came with the Leopard Software Upgrade on CD. Before I installed the Leopard, I had turned it on to see if it works and it did. Right away, I installed the Leopard and it said that everything was successfully installed. It asked me to reboot so I did. The login screen came up and I put in my password but for some reason it won't let me log in. When I click "Login," the screen goes blank for a second and goes right back to the login screen. I tried with a made up password to see if my password was the problem but the login screen shakes to inform me that my password is wrong. So I've figured out that my login password and everything is correct, but it keeps taking me to the login page and won't let me into the desktop. How do I fix this?

You can also change your login password by starting up from the Leopard DVD, and selecting the option in the menu bar to change your password. When you reboot, you can then use the new/changed/corrected password.
After you get back to your Desktop in Leopard, be sure to open System Preferences, select Security pane, FileVault, and set your Master Password. Be careful NOT to turn on FileVault unintentionally, as it will immediately start encrypting your account, which will slow down everything as it consumes CPU cycles encrypting your hard disk. If you forget your password, or if your encrypted account becomes damaged, you'll lose EVERYTHING in your account. The Master Password is used, among other things, to reset user passwords when you can't remember them, so you don't have to resort to the DVD.

Similar Messages

  • Bluetooth Mighty Mouse keeps freezing after upgrading to Leopard

    My bluetooth mighty mouse has frequent, intermittent freezes (which appear to be a loss of sync to the iMac) after upgrading to Leopard (now 10.5.1) from 10.4.11 on my iMac 24" alum body. This mouse was rock solid on my iMac running Tiger. Luckily I do have a corded mouse which I've been forced to use the past week or so.
    Can anyone suggest anything?
    Thanks.

    I was just trying to help my Dad with the same exact issue (Mighty Mouse stops working on waking from sleep & trying to open bluetooth prefs at that point causes the system to lock up. Have to hold down power button to reboot)
    Oddly I have Leopard on my iMac 2.16 Core 2 Duo and have no issues with my Mighty Mouse.
    Hopefully someone comes up with an answer .... My Dad is 80 and just bought a new Powerbook and Mighty Mouse. It's hard to explain why the mouse doesn't work.

  • Final Cut Studio license invalid after upgrading to Leopard?

    Hello,
    After upgrading to Leopard 10.5.1, Final Cut Studio v5.1.4 and its companion apps like DVD Studio 4 do not recognize my FC Studio License as valid. I input the license key and it says:
    "Licensing Error
    This application cannot continue because the licensing data is corrupt."
    I am a licensed user via the FC Studio Crossgrade since 2006 and all has been fine with Tiger before Leopard.
    I have used Disk Utility to "repair permissions". I have removed the FC files from the Preferences folder to give it a clean start.
    PERHAPS A HINT?:
    So I tried to re-install FC Studio 5.1 from the FC Install DVD and I get this message after inputting the key:
    "Alert
    Licensing Error: The license file will not be written to disk because the user does not have enough privileges."
    I have Administrator privileges on this account and I even tried to install it as 'root' and the same error occurs.
    Is there a file that I need to change permissions on?
    THANKS for any help here! And happy holidays.
    Bonafide

    Hi,
    Unfortunately there is also an issue with installing FCS2 on a brand new installation with Leopard and this licensing error.
    "Alert Licensing Error: The license file will not be written to disk because the user does not have enough privileges."
    This also occurs, apparently, that if you are logged in with an Active Directory user with Admin privileges it still will not let you install the product keys.
    This is much the same as a problem with Adobe CS3 products, only the updates work when you are logged in with a local admin - not an Active Directory Admin.
    Both these problems are really really annoying for those on corporate networks - such as myself.
    For my problem, I had to log out as my AD account, login as a local admin and then install the software. .
    KJ

  • Stuck in a "loop" at the login window after upgrading to Leopard

    I bought a new iMac Oct 26. It contained Tiger, and included a disk for installing Leopard. I easily got the machine up and running using Tiger, but last night I attempted to install Leopard. When the installation was complete, I tried to get it running. A screen asking for my password came up. I keyed that in and hit logon. Back came the screen asking for the password. To make long story short, I tried everything I could last night, and then called Apple Support this morning. Took quite a while, but I was back in business this afternoon. The technician who helped me sent me the email copied below describing the solution. Perhaps it will help someone else? Romelle
    Hello from Apple!
    Charles at Apple Service & Support thought that you might find this article useful. We hope that it helps resolve your technical issue.
    Link: http://www.info.apple.com/kbnum/n306965
    Mac OS X 10.5, iMac (Late 2007): Stuck in a "loop" at the login window after upgrading to Leopard
    Issue or symptom
    After installing Mac OS X 10.5 Leopard on a 20-inch or 24-inch iMac (Late 2007) computer, you may not be able to log in at the login window. Your login name and password are apparently accepted, but after a blue screen appears for a few seconds, the login window reappears instead of your desktop.
    Products affected
    20-inch or 24-inch iMac (Late 2007) computer with 2.0, 2.4, or 2.8 GHz processors
    Mac OS X 10.5 Leopard
    Solution
    If Leopard is installed
    Start up from the Leopard Install DVD and perform an Archive and Install installation (and select Preserve Users and Network Settings).
    After the Archive and Install is complete, you should be able to successfully log in. Use Software Update to install any other updates.
    Important: Install the iMac Software Update 1.3 for Leopard after the Archive and Install is complete.
    If Leopard is not yet installed
    If you have not yet installed Leopard on your 20-inch or 24-inch aluminum iMac computer with a 2.0, 2.4, or 2.8 GHz processor running Mac OS X 10.4.x, but previously installed the iMac Software Update 1.2, you should install the iMac Software Update 1.2.1 (Tiger) or later, before installing Leopard.
    Thank you,
    Apple

    If Leopard came pre-installed and this is a new machne, then the disks that came in the box should let you archive install preserving users & network settings. The disks have a grey label, and if you get more than one use disk #1 for this procedure.
    Hold down the "option" (also known as "alt" on the new keyboards) key when starting up with disk #1 in the optical drive. Select the install disk icon on the grey screen and click the arrow. Then when you get to the "select destination pane, click the options button after selecting your hard drive as the destination. In options A& I preserving should be checked by default, if not, select them. Click "ok" to dismiss the options pane, then run the installation.
    If this does not work for you, call apple support. They want everything to work. Be patient, they are real busy these days.
    Slim

  • Sound input (line-in) not working after upgrade to Leopard

    I have upgraded my iMac Intel Core 2 Duo (white plastic frame version) to Leopard on Friday when it released. The upgrade process went very well with one MAJOR exception: Audio input through "Line-in" connection does not work anymore. I have tried everything that comes to mind so far from rebooting, to unplugging and replugging, to checking back all system settings, etc. Nothing works. At this point, I can't use my headset anymore for making calls with Skype or using voice chat in games. I would seriously need some help as I refuse to have paid $129 only to have Apple themselves break something in their products.
    For this reason, I have to currently consider Leopard a failure. Reason being, in MS Windows or Linux, there always is a way around to make things work... I can't find anything at all with this release of the OS.

    The OP reported their line-in input "broke" after upgrading to Leopard, however my MBP stopped recognising input from the mic on my headset a few weeks ago when I was still running Tiger. This might possibly indicate that the change in OS X's handling of the line-in input was present in a Tiger update, but I can't remember the exact correlation between the dates of my last update and this problem. All the same, I'm pretty annoyed that a headset that worked perfectly for several months is now suddenly unusable without a USB adapter.
    Prior to stumbling across this thread, I visited two Apple stores, who both tested with an output from an iPod and told me that the input was working fine, leading me to buy a brand-new headset (even though I'd tested other working headsets without success) which, naturally, produced the same results.
    Seems to me that the hardware is fully capable of processing a mic input through the line-in port, as it's never had any problems with any unpowered source until recently, so Apple must surely be able to undo the change they made?

  • Can't use Airport Express after upgrading to Leopard

    I use Airport Express for wireless printing and AirTunes via powered speakers/hifi. It was working very reliably until I upgraded to Leopard. Now, I am unable to use Airport Express. I get the blinking orange light, but when I scan with Airport Utility, Airport Express is not detected. Manual setup is grayed out, so I can't set it up at all. I am using Airport Utility Version 5.2.2 (522.3), and there does not seem to be any updates or patches to apply at the moment. I have tried on my iMac G5 and MacBook, with the same result on both computers.
    I am also reading that many others are having problems with Airport Express after upgrading to Leopard, perhaps not with my specific hardware configuration, but this is very disappointing.
    I am open to suggestions to try a few things to get it working, so any help is appreciated.
    Message was edited by: a j

    From the Mail menu, select "Preferences". Hit the Accounts tab. Select the Account. Under Account Information, reapply the user name and password.
    Check with the provider if the account needs authentication. This is in the Advanced tab. Usually just a repeat of user name and password.

  • After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

    After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • After upgrading to Yosemite my IMac  Hangs

    After upgrading to Yosemite my IMac will hang usually on a given App and I have to force a power down and reboot to get it back in operation.
    Anyone else having this problem?

    russellfrompalm desert wrote:
    I've checked the App Store, no updates available. However, McSoltaire isn't listed
    in the available solitaire apps.
    Do you think I should download/buy new solitaire & hearts apps?
    Did you get McSolitaire from the Mac App Store, if not it would not be available there. You should contact the developer to see if they have any updates or you can also look in MacUpdates.com

  • IPhone won't sync after upgrading to Leopard

    My iPhone won't sync, or even show up in iTunes, after upgrading to Leopard. I've tried restarting my Macbook Pro, trying different USB slots, closing and reopening iTunes, everything. Has anyone else had this problem??
    I've tried everything apple suggests:
    1. The iPhone battery might need to be recharged. For information about charging iPhone, see "Charging the Battery" in the iPhone User's Guide.
    2. If that doesn't work, disconnect other USB devices from your computer and connect iPhone to a different USB 2.0 port on your computer (not on your keyboard).
    3. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
    Note: If you enter the PIN incorrectly three times, you may need to contact your carrier for a Personal Unlocking Key (PUK) to enable your SIM card again.
    4. If that doesn't work, restart your computer and reconnect iPhone to your computer.
    5. If that doesn't work, download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes.

    You might need to remove and reinstall the Apple Mobile Device Service. Follow the link below for info on how to do this.
    http://docs.info.apple.com/article.html?artnum=306637

  • Motion screen is completely black after upgrading to Leopard

    Hi,
    I have opened IDVD for the first time after upgrading to Leopard and it does not work correctly anymore.
    The motion screen is in black and does not show anything (while you can hear the sound of the theme selected)
    This happens with already created projects and new projects
    All since upgraded to Leopard
    It is possible to see a movie in an already created project, if you are able to go through the menuscreens and select the movie without actually seeing anything. Than the movie is shown correctly.
    I work with the latest version of Leopard and IDVD, all on a macbook
    Hope you can help !!
    Thanks a lot
    Marco
    (A recently convert from windows to Mac, and a very happy one.)

    Hi,
    Thank you very much for your quick answer.
    I have no issues with laptop being to warm as it happens just after starting to work the computer
    I have reinstalled IDVD, made no difference
    I have run the apple´s updater.
    No external FW or USB connected
    Only two plugins for QT, both standard
    I have not tried switching accounts, as I only have one account
    Enclosed the info of the graphics card
    Intel GMA 950:
    Chipset Model: GMA 950
    Type: Display
    Bus: Built-In
    VRAM (Total): 64 MB of shared system memory
    Vendor: Intel (0x8086)
    Device ID: 0x27a2
    Revision ID: 0x0003
    Displays:
    Color LCD:
    Display Type: LCD
    Resolution: 1280 x 800
    Depth: 32-bit Color
    Built-In: Yes
    Core Image: Hardware Accelerated
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Display Connector:
    Status: No display connected
    Hopefully you can help !
    Thanks a lot
    Marco

  • After upgrading to Leopard: Leopard crashes because of "SFWordProcessing"

    Hi!
    Sorry for this double posting, but actually "rachelynne" posted here problem in the iWeb-Forum.
    http://discussions.apple.com/thread.jspa?threadID=1221556&tstart=0
    So, this is my problem: If I type any letters into a pages document, i might suddenly crash with the same "SFWordProcessing"-Problem like rachelynne already described. This first occured after upgrading to Leopard.
    Maybe you need the crash report?
    I am not able to continue working with Pages. Please, help me, Apple =)
    Fadi

    I GOT IT!!!! after many frustrating hours, i have figured it out. at least the problem i think you have, and that i had. when you plug in your iphone, and iphoto auto-launches, go to the prefrences in iphoto, and at the bottom of the "general" tab, the "connecting camera opens..." drop down needs to be set to "NO APPLICAION" or whatever. in other words, you want iphoto to do nothing when a camera is plugged in. then unplug iphone, and plug back in. you still may need to launch itunes manually, but it will be there.

  • Keyboard issues after upgrading to Leopard

    Seems there's been quite a bit of discussion about this topic already but it's been confined to laptops and I haven't seen a solution yet. I'm seeing the same problems on a desktop computer using either a wireless or USB keyboard.
    After upgrading to Leopard, my keyboard would occasionally stop responding to keystrokes. I have seen this happen on both an Apple USB keyboard and my Logitech wireless keyboard. With either keyboard, the letter and number keys would stop responding but keys like the CapsLock and Delete keys would still work. I have seen this happen when using Mac Office 2004 (Excel and Word) and Safari. With Excel, when the keyboard stops responding, if I click on a different cell, the keyboard comes back. I did update to 10.5.2 and I do have the latest version of the Logitech software but the problems still persist.
    Strangely, I have only seen this happen on my MacPro but NOT my MacBook. There is a difference on how each machine was upgraded to Leopard though. On my MacBook, I did a clean install of Leopard on a new hard drive and then migrated my docs and apps from the old drive. On my Mac Pro, I did an upgrade installation over Tiger. Fortunately, I cloned my hard drive prior to installing Leopard so going back is an option and so is doing a clean install followed by a migration which is what I did on my MacBook.
    Is there a fix for the keyboard problems? Am I going to have to downgrade back to Tiger?

    Thanks for posting this. I thought I was alone in the universe. I have the problem with my mini, which came with Leopard installed. The USB keyboard will stop working in Word or Entourage ('04) and I have to close and reopen the document to get the keyboard going again. Thankfully, my mouse still works when this happens, so I can use it to close and save.
    It seems to sometimes be triggered when I switch between applications, but I haven't been able to replicate it consistently. It is particularly bad when using find in Word. The find window will go dead and I have to close it and reopen it to do another search. (Though interestingly, I don't have to close the Word doc.)
    It's irritating.

  • MacBook Pro spontaneously wakes from sleep after upgrading to Leopard?

    For some reason, after I upgraded to Leopard, then whenever I put my MacBook Pro to sleep, it spontaneously wakes up after some time (can be from a few minutes to an hour or two.) I don't know why this is happening, but I know for sure that it's related to Leopard since I put my laptop to sleep every night (it's in my bedroom) and after upgrading to Leopard, it started to just wake up a short while after putting it to sleep.
    At first I thought it could be Time Machine, so I disconnected all my external drives, but that didn't seem to work.
    Does anyone know why this is happening?
    Thanks in advance!

    I have the same issue. Installed Leopard last night on my first-gen 1.83 MacBook. The next morning the Mac was a little slow in wanting to wake up. After that it stalled on transferring a large file from my G5 and I had to issue a reboot command via the shell to get it out of that. A few minutes later the computer locked up when trying to apple > tab through the application.
    I put it to sleep after restarting the Mac from that freeze. A while later while walking out of the house I happened to glance at the Macbook and saw the apple glowing while the lid was shut and then it went back to sleep.
    Tonight I put the Macbook to sleep on the way out to dinner. I noted that I had 84% of my battery left. A few hours later when I got home the MB was warm, the apple was glowing and I had 9% of my battery left.
    Looks like there is some work to be done asap for 10.5.1

  • After upgrading to Mavericks my iMac does not see Sony camcorder in iMovie anymore. It still works on MacBook, so nothing wrong with camera or connections.

    After upgrading to Mavericks my iMac does not see my Sony camcorder anymore. I tried the new iMovie as well as the old version 9.0.9, which is still in Applications. I checked the camcorder and connections in iMovie on my MacBook (not upgraded) and that still functions properly, so the problem does not seem to be in iMovie, old or new, or in camcorder and connection.
    Anybody with the same problem or a solution?
    Thanks mbkom

    Try this

  • After upgrade to leopard dvd studio pro 4.5 quits on build format.

    After upgrade to leopard dvd studio pro 4.5 quits on build format.
    Any suggestions?

    Let's try to clarify some things.
    1. There is no DVD SP 4.5. The latest UB version is 4.2.1. Which do you have?
    2. Did you do an upgrade install of Leopard, or a backup/clone of boot drive and then a clean install. Unless you do the latter, there are issues with the pro apps. And certainly an archive and install is not the way go.
    Let us knw.

Maybe you are looking for