After upgrading to Logic Pro X, I can't find access to my Virus Snow TI hardware synthesizer.  Where should I be looking?

Things seem to be harder to locate in Logic Pro X.  I cannot find where or how to access my Virus Snow TI synthesizer within Logic Pro X.  Can anyone tell me where to look or how to do this?  Thanks in advance!

The Virus has its own OS X compatible operating system and sound sets, as well as drivers and firmware updates.  Under previous versions of Logic Pro, you could select it and it would open a Virus TI screen that hovered over Logic Pro main screen, where you could select sounds leads, pads, etc from that screen.  I believe the actual sounds reside in Virus hardware memory.  Yes, I have recently installed the latest Mavericks compatible Virus updates.

Similar Messages

  • Hi I am attempting to use a Zed R-16 with Logic Pro 9,  how can I setup a bounce for output 17-18  this is where the mixer sums (the audio outputs on the zed come through 17-18)

    hi I am attempting to use a Zed R-16 with Logic Pro 9,  how can I setup a bounce for output 17-18  this is where the mixer sums (the audio outputs on the zed come through 17-18)
    I would like to be able to quickly bounce down my mixes,  through the Zed outputs. 

    Pancenter...
    Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
    I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
    +1 on the UAD stuff....
    Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
    Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
    Thread 32:
    0   libSystem.B.dylib      
    0x94c29afa mach_msg_trap + 10
    1   libSystem.B.dylib      
    0x94c2a267 mach_msg + 68
    2   ...tope.audioplugins.AU.Trash2
    0x667bd57a catch_exception_raise + 250
    3   libSystem.B.dylib      
    0x94c57259 _pthread_start + 345
    4   libSystem.B.dylib      
    0x94c570de thread_start + 34
    That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

  • After upgrading to 10.6.8, apps can't find fonts

    I recently upgraded to OX 10.6.8 (MacBook Pro). Now Quark Xpress and Microsoft Word can't find the fonts. They both see the same list of fonts. The fonts are all windows true type fonts (.ttf). The list of fonts available does not include all the .ttf fonts in the library. There is no font folder anywhere that has only the fonts that these two apps see in it. The apple apps I tested see all the fonts in the library.
    How do I make the fonts available to the non-apple applications?

    Reset your fant caches, use the Step #12  OnyX Routine here
    also go through and check other things with other Steps as applicable to check
    Step by Step to fix your Mac

  • After upgrading my iMAC to Maverick, I can't find iMovie

    I can no longer find iMovie on my iMAC after upgrading the OS to Maverick

    Alister,
    If your computer came with a set of discs, it may be unnecessary to purchase the applications from the App Store, as they can be reinstalled from the discs that came with the computer.
    Mac OS X 10.6: Reinstalling applications that came with your computer
    http://support.apple.com/kb/PH6439
    If you do desire to upgrade to the newest versions of these applications (should the computer have shipped with iLife '08 or '09), then the apps are now separate items in the App Store. However, even separately, the applications are a great deal less expensive than their older counterparts.
    All my best,
    Allen

  • After upgrading to 27.0.1, I can no longer access one secure site. I now get Error code: ssl_error_bad_mac_alert. This worked before the update.

    I am trying to access the GUI administration page of my wireless controller. It is using a cert issued by the vendor that makes it, so the names do not match. I have created a permanent exception for the certificate. Whenever I try to access the site, I now get the following error every time:
    Secure Connection Failed
    An error occurred during a connection to 172.24.6.10:4343. SSL peer reports incorrect Message Authentication Code. (Error code: ssl_error_bad_mac_alert)
    The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
    This page worked fine before the most recent update.
    Is there a setting or something I can change to allow this page to load?

    Thank you both for your suggestions. I had seen the possible solutions of time and ipv6, but those did not help. I cannot recycle the wireless controller, as that would disrupt my business's network too much.
    Cor-el, your answer was what worked for me. I went through each security.ssl3. setting like you suggested and found that
    security.ssl3.dhe_rsa_des_ede3_sha is where the error was coming from.
    With that one set to false, I was able to connect to the admin page again. When I set it back to true, the error comes back.
    I also found that specifically any one of the following were needed for teh connection to work as long as the one above was false.
    security.ssl3.rsa_aes_128_sha
    security.ssl3.rsa_aes_256_sha
    security.ssl3.rsa_des_ede3_sha
    so I am leaving the one that caused the error disabled and it is working again.
    Thanks!

  • Where can i find the upgrade from logic pro 7.1.1 to 7.2?

    Hello there.
    Is the upgrade from logic pro 7.1.1 to 7.2 still available out there somewhere? I know I'm a bit behind the rest of the world but financially I'm taking the 'do the best with what you can' route!
    Never used logic before, moving up from garageband and cubase sx cos everyone says it's a better program.
    Many thanks,
    GDx

    Hi
    If I remember correctly, the 7.2 update was a "Paid for" update, with a new dvd.... so you are most likely out of luck.
    The good news is that Logic Pro is pretty cheap on the Appstore
    CCT

  • HT1338 I am a student, and I purchased Logic Pro 9 nine or ten months ago, can I download a free upgrade to Logic Pro X?

    Hi,
    I am a student, and I purchased Logic Pro 9 nine or ten months ago, can I download a free upgrade to Logic Pro X? It seems I should be able to.
    If not, how much would it cost me? Does anybody know?
    Thank you,
    Michael McCarty

    Thank you QTKirk... do you happen to know if Apple has a student discount for Logic Pro X? It seems to me I received one on Logic Pro 9... Getting old, could be wrong about that.

  • If y have logic pro 9, why i don't can upgrade to logic pro x ?

    if y have logic pro 9, why i don't can upgrade to logic pro x ?

    You can, for $199 - which is cheaper than all the previous updates.

  • I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I requ

    I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I request it? Thanks!

    If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD

  • Can i upgrade from Logic PRO 7 to Logic express 9 (upgrade version)?

    Hello
    I was about to upgrade from Logic Pro 7 to Logic Studio 9 when i noticed that all the fetures i need are actually now in cheaper Logic Express 9.
    So would it be possible to upgrade to Logic Express 9 from Logic Pro 7? or will it only upgrade from older versions of Logic Express?
    Many thanks
    Tom

    Hi,
    guess that's not possible. But i strongly recommend upgrading your Logic Pro 7 to Logic Studio. It's not that much more money, but i bet once you have the new Express version, you'll desperately miss some of the features you only have with Logic Pro/Studio.
    I would recommend to call apple support or ask a dealer to find the correct upgrade version.
    Fox

  • Will upgrading to osx mountain lion upgrade my Logic Pro 9.1.6 to 9.1.7?

    I wanna know if upgrading m computer to osx mountain lion will upgrade my Logic Pro to it's current update to 9.1.7.
    I wanna upgrade to the new osx im worried if it will update all my software as well

    First, you can (and should) always back up your copy of Logic before updating, that way you can always go back to the earlier version if you need it.  If you do that you might as well update to the latest version of Logic.
    Going to 10.8 won't update Logic, but you'd probably want to update Logic (and most other apps) to the newest versions if you do a major OS update like that.

  • HT5794 I just upgraded from Logic pro 9 to  Logic Pro X on my computer, but all my EXS24 libraries are missing all of a sudden. How do i Get them back???

    I just upgraded from Logic pro 9 to  Logic Pro X on my computer, but all my EXS24 libraries are missing all of a sudden. How do i Get them back???
    I have checked both the resource folders, and made backups from Logic pro 9, but its not recognizing them, or saying that they're missing a bunch of samples.
    What do i do?

    Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.

  • How do I upgrade to Logic Pro from Logic Express?

    When I decided to dump ProTools and go with Logic, it was easy because Express was pretty cheap and there was always an upgrade path to Logic Studio. Now it's version 9 and I don't see an option to upgrade to Logic Pro 9 from Logic Express 9. Can you guys help me out here?

    Based on the replies in the Logic Express forums, it looks like I'll just have to suck it up until Logic 10 comes out. 
    I think I would feel totally hosed if it weren't for the fact that I recently got Komplete 8 Ultimate, so I don't really care for the Logic synths. 

  • After upgrading to Lion, my Canon 7d can not be found.

    After upgrading to Lion, my Canon 7d can not be found.  I have used the USB connection to connect to my camera for several years with no problems, until now.  I have reset the SMC, by powering off the computer and unplugging everything for approx 30 minutes.  There are no new drivers available and any assistance will be appreciated.

    I was having the same issue after upgrading to Lion OSX. I searched the web and found many people had the same problem but no solution so...
    I called Canon and they told me to run 'Image Capture' its part of the Canon Software Suite so you should have it and then try downloading the pictures like you usually do. I use 'Image Browser' and with 'Image Capture' running in the background it works perfectly now.
    Hope this helps!!

  • After upgrading to 11.0.5.5 can't access iTunes store. Temprorarily unavailable all the time.

    After upgrading to 11.0.5.5 can't access iTunes store. Temprorarily unavailable all the time. Nothing helps, tried to flash the DNS. Nothing.....

    Same issue.  I emailed apple and they had me call apple.  Not really any help.  Did all the troubleshooting listed and to have further help diagnosing problems it isn't free.  I explained to the rep that I have seen others having same issues - he didn't know anything about.  This is first time I have had problems.  I can't even purchase song on my PC but can on my iphone.  I just would like to be able to access my account.  Afraid to sign out of itunes in case I can't even get to my library etc. 

Maybe you are looking for