After upgrading to Mavericks, I seem to have lost everything in my Outlook for imac 2011.

after upgrading to Mavericks, I seem to have lost everything in my Outlook for imac 2011.
all my email accounts, all my emails, all my folders & subfolders (received & sent) ... everything.
help!

Remove Adobe plug ins if any.
Macintosh HD > Library > Internet Plug-ins
AdobePDFViewNPAPI.plugin
AdobePDFView.plugin

Similar Messages

After Upgrading to 10.1, all clips have lost the audio component. Is there any way to get this back?

I have recently updated Final Cut Pro to 10.1, after this upgrade (as well as an upgrade to Maverick) non of the video clips in ANY event or project have any sound component. I have a backup of the project and event files before the upgrade, but I have no idea how I can get the clips back and if I do how I can update the numerous projects I have that no longer have sound. Has anyone else had this problem, if so were you able to fix this? Or am I just doing something wrong?
The clips have no wave form when I look at them so it's almost like they have been stripped of sound. If I goto the event browser and say reveal in finder, I am taken to Original Media, but these are tiny files that can't be played in VLC - they almost look like shortcuts or dynamic links or something...
Can anyone help me get the adio back on these or should I revert back to a previous time machine backup and not update to 10.1?
Thanks
Richard

Not sure what made the files lose the audio, but the solution for my issue was:
In Final Cut, right click on a clip in the event viewer, Reveal in Finder
Close Final Cut Pro
Export orginal clips from Aperture.
Copy exports into folder that the original meda was in, replace all
Open up Final Cut Pro
Load project again, it will start analysing the audio...
Job done

I had Zotero connect to this with my older Version, it automaticlly upgraded and now I seem to have lost it, how do I get it back?

I need to get my zotero back. It has all my sources for my master's thesis which is due in two to three weeks. www.zotero.com is no help. The button for it no longer shows in the bottom of the screen when I open up Firefox. The automatic Firefox upgrade seems to have destroyed my zotero files with all of my bibliographic entries. I need to get this back ASAP! I really do not want to have to take the time to redo the entire thing. www.zotero.com is no help. I sign in and my library has nothing in it. They are no help as they just tell me to down load it again.
Heather McLaughlin
[email protected]
520-248-0654

See:
*https://support.mozilla.org/kb/what-happened-to-the-add-on-bar
See also:
*https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox
*https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
*The Addon Bar (restored): https://addons.mozilla.org/firefox/addon/the-addon-bar/
*Tabs On Bottom: https://addons.mozilla.org/firefox/addon/tabs-on-bottom/
*Classic Theme Restorer: https://addons.mozilla.org/firefox/addon/classicthemerestorer/

After upgrading to Mavericks 10.9.2 I keep getting dialog boxes asking for keychain access. Any help would be great. Thanks.

Hi.
Recently upgraded to Mavericks 10.9.2 and keep getting dialog boxes from different apps asking to access my keyahain. I've included 2 screenshots. I have no idea what is causing this. Thanks for any help.
OS X 10.9.2
2.8 ghZ. Intel Core i7
16GB Memory.
file:///Users/ronniebuttacavoli/Desktop/Screen%20Shot%202014-03-05%20at%209.27.2 2%20AM.png
file:///Users/ronniebuttacavoli/Desktop/Screen%20Shot%202014-03-05%20at%209.28.1 9%20AM.png

If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing.
Genius Bar Reservation US

Since I installed Mavericks I seem to have lost the comforting whooooosh that I used to hear when mail was sent.

Since I installed Mavericks I have lost the comforting whooosh I used to get when mail is sent. And I cant find anything in the preferences to get it back.

This happens to me a lot. Quiting Mail, and re-launching brings it back (looks like a bug)

After upgrading to Mavericks, the free space on my SSD keeps going down for no apparent reason

I downloaded Mavericks and installed it on my macbookpro ( with Crucial M4 SSD) and the free space on my ssd keeps going down for no reason. I reinstalled it from a bootable flashdrive, and the free space went from 20G to 60. Since then it keeps going down and I am now on 48G. I cannot find the source of the drain. Anyone else with the same problem?

http://reviews.cnet.com/8301-13727_7-20025542-263.html
I have not tested the solution suggested in the article linked above.
But hope it helps.

Since upgrading to iOs7 I seem to have lost an item from my notes app and it was the one that had really key info in it?

One of my notes has disappeared from my list of notes in notes app since I upgraded. Is thee any way of recovering this? It wasn't done through the iCloud email so it's not saved in there. Is was in my Yahoo account

Is it still present on Yahoo.com?
If so,
Settings > Mail, Contacts, Calendars > Select the yahoo account > turn off notes then turn them back on

HT1926 I tried to download the latest version of iTunes but now seem to have lost everything and can not access my library at all. Instead i keep on receiving the message 'Application has failed to start because MSVCR80.dll was not found. I cannot access

I tried to download the latest version of iTunes but failed half way through. It suggested that i reinstall we I tried. However, i now get this message which states "Application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem"
I have tried this but with no success. I have therefore found that I cannot access my iTunes library at all now.
What should I do.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99792)

HELP I seem to have lost all my files after turning on Filevault

Hey all,
im completly new to all things Mac, everything has been great so far but now i seem to have lost everything.
I turned on Filevault protection then shutdown my Macbook, came back to it a couple of hours later and now all of my files, itunes music files have gone, all of the settings and preferences seem to be back to the factory settings, and well everything has dissapeared?!! any help would be greatly appreciated.
Many thanks.

I have no idea how Apple would handle this. I would hope they would tell you to go into an Apple store and have someone there look at it and fix it. That would be very good advice. Trying to fix a problem like this over the phone would be really hard.
Clearly, your system is no longer mounting your sparseimage file the way it should. The good part of this is that your files are still relatively safe inside that sparseimage. I would not try to turn filevault on or off again. That could be dangerous. Your goal now is backup.
In the terminal, you can type "open /Users/.stuartcampbell/stuartcampbell.sparseimage" to mount that disk image as a new volume. Hopefully, you can log in as "stuart campbell" and do this. That would be really good. If you can, log in as "stuart campbell", open that disk image, and copy all the files you find into a new folder named "saved files" under the "/Users/Shared" folder. You want to get your files out of that sparseimage and into the real file system.
Once you get your files out, you can try to turn filevault off again. My hunch is that FileVault is already off. I think your system has created a new home directory for you named "stuart campbell1" because the old one was corrupted. If this is so, you can safely copy all your files from the sparse image into this new account, overwriting anything you already have. (Just make real sure that your current home directory really is just blank data!!!). At this point, you should be running again, with your home directory being named "stuart campbell1".
If all this is true, try the following. Rename that old "/Users/stuart campbell" folder to /Users/stuart campbell.old". You can run NetInfo, go into "Users", and change your home directory back to "stuart campbell". Then, before doing anything else, rename "stuart campbell1" back to "stuart campbell". Save your NetInfo changes, quit, logout, cross your fingers, and log back in.
I realize this is very complicated and more than you really want to do. I don't see any way around it. It is very difficult to know exactly what state your system is in and exactly what is going to work and what won't. A trip to the Apple Store or a similar place might be a good idea. I say might because there is no guarantee they can fix it either. There are still way too many steps that say "If this works" and "try this".
There are some key things to remember and do in any case. Try to open that disk image and get your files out.
Don't fiddle with any account security settings until your files are out of there.
Once your data is secure (or rather - in a safe place), you can feel free to fiddle with account settings and swap out those directories to get back to a good state. I can assure you that it will take a bit of fiddling and may not work at all. Just get your files out there and we can get you up to speed again after that.

Does iDVD work with Maverick? This is the first time I tried to burn a DVD using iDVD after upgrading to Maverick. It seems to get stuck at encoding menu stage and not doing anything.

I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?

I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
You may get a better responce in the iDVD forum.
https://discussions.apple.com/community/ilife/idvd
regards

Upgrading to Mavericks seems to have lost my windows 7 dual boot up capability. How can I get it back?

After having installed with Bootcamp windows 7 a couple years ago, upgrading to mavericks seems to have lost that capability despite windows being installed in its own partition. How can I get this back?

This was the scenario:
The first time I updated, it was only my music that was lost.
When I got my music back, I lost my apps.
When I got my apps back, my contacts, notes and photos were lost.
Now I got back everything except for my photos.
(Yes, I restored from backup several times since the first update.)
Do you think if I try restoring from back up, my photos that were taken from my ipod will be restored finally?
Thank you.

After upgrading to Mavericks and iPhoto 9.5 my shared photo streams seem to contain no photos when seen in iPhoto. From iPad the streams are fine. How can I get them to be recognized by iPhoto again?

After upgrading to Mavericks and iPhoto 9.5 my shared photo streams seem to contain no photos when seen in iPhoto. From iPad the streams are fine. How can I get them to be recognized by iPhoto again?

Disable Photo Stream in the System/iCloud preference pane
and in iPhoto's Photo Share preference pane.
Reboot and reenable both respectively. That should jump start Photo Stream.
OT

After upgrading to mavericks all my folders in Mail are gone, with important documents, does anyone have any ideas how I can retrieve them? Thanks Warren

Hi,
After upgrading to Mavericks, all my mail folders in Mail are gone. Does anyone else have this problem or know how to fix this. I only use the apple Mail, not anything else like gmail etc. Its very frustrating as I had importantant documents there.
Thanks
Warren

this might help with the gmail problem: http://www.wired.com/gadgetlab/2013/10/mavericks-issues-and-fixes/?viewall=true

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

HT1338 Do I have to reinstall my print drivers after upgrading to 10.8? I seem to have lost both my printers and my ability to download from my camera. Never had problems with 10.7. I'm a little scared.

Do I have to reinstall my printer drivers after upgrading to 10.8? I seem to have lost the ability to communicate with either of 2 wireless printers and to download pictures from my camera. (Photoshop keeps telling me it can't find the device.) Any suggestions?

Have you repaired permissions and restarted your computer after installing ML? Checked your printer settings in System Preferences?
If Software Update does not list any updated drivers for your model printer, you should go to the printer's manufacturer website and download the drivers from there and/or contact their tech support to determine if your printer is compatible w/ML.
Read the various Knowledge Base ML printing articles. Here are a few to get you started:
OS X Mountain Lion: If the software for your printer can’t be found
OS X Mountain Lion: Troubleshoot a USB printer
OS X Mountain Lion: Troubleshoot an AirPort printer
If none of the above work, post back w/the model of your printer and how it's connected to your computer. USB? Wireless?

After upgrading to Mavericks, I seem to have lost everything in my Outlook for imac 2011.

Similar Messages

Maybe you are looking for