After upgrading to Mountain Lion, Interface builder starts up with an error every boot.

I've got a late 2008 Macbook Unibody 13", and a few months back I upgraded from Snow Leopard to Mountain Lion. Ever since the upgrade, at every boot up Interface Builder starts up with an error. I've just ignored it mostly, but now I'm getting annoyed with it. How can I find the programs that start up every boot to research this, or stop it from loading Interface Builder every time?

You have to delete it using the minus sign at the bottom. The check/un-check is for hiding items.

Similar Messages

After upgrading to Mountain Lion from Lion, Mail, Safari and note need about five minutes to start.

After upgrading to Mountain Lion from Lion, Mail, Safari and Note need about five minutes to start.
After starting, Mail answers are very very slow. The same for Note. Instead of, sending mails is only a bit slower than before upgrading.
In Safari, I choose Goggle as starting page in Preferences, but at every restart misses that starting page and the search strip says "Seek Google or instert an address".

Well, I found the solution here in another thread.
i just want to mention that the samw thing was happening also for the notes and the reminders apps!! (they quit unexpectedly!!).
So I found the solution here.
Thank you graphicsluc!!!

After upgrading to mountain lion, my ip camera video feeds time out

I've been using my iMacs for a few years to monitor six ip Camera video feeds. The cameras I use are both FOSCAM and AXIS brands. I've used a few third party software solutions to do the monitoring, but I could also always use Safari to access a camera at a time by putting that camera's IP address in the address field and logging into the camera.
After upgrading to Mountain Lion, my video feeds started timing out when using DComplex's IP Camera Viewer, so I thought initially it was strictly an issue with that third party app. However, I then logged into my cameras using Safari and they timed out as well. Similarly, when using Axis Camera viewer, my video feeds would time out. It seems as whatever the issue, it does not affect Firefox, because I can still login and monitor 1 feed at a time using that browser without any timeout issues, and for some odd reason, the FOSCAM only program uFoscam works, but the problem for me with that app is that it only works with Foscam, and not the Axis cameras (besides it's an inferior program to IP Camera Viewer in my opinion as well).
Has anyone encountered this problem and come up with a solution? I'm thinking it's some sort of plugin or video codec problem, but it's well above my paygrade to figure it out.

I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
Could be the Mountain Lion objective-c framework has a buffering issue.
Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w? How can I get this set up to print?

After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.

From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5)

After upgrading to mountain lion, the movies I create using iDVD periodically stop then resume abruptly when I play them back on my DVD player. Any ideas on correcting this?

After upgrading to mountain lion, the movies/slideshows I create using iDVD playback in a jolting start/stop manner. This didn't happen with the prior os - playbacks were flawless. Any ideas, short of uninstalling mountain lion, on how to correct?

I know this is not much help. IDVD and Mountain Lion are working perfectly for me. I know many others that use Mountain Lion with iDVD also.
I think your problem lies elsewhere.

After upgrading to mountain lion my calendar does not print in weekly mode anymore

after upgrading to mountain lion my calendar does not print in weekly mode anymore

I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
Could be the Mountain Lion objective-c framework has a buffering issue.
Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

After upgrading to mountain lion my mac is very slow?

Hello
After upgrading to mountain lion my mac is very slow
It was starting in 10 seconds and shuting dow in 5 seconds and now it's taking more than one minute to start it or shut down it and everything is slow
why????????/
Thanks

First, back up all data immediately, as your boot drive might be failing.
Take these steps when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

The Airplay Icon is not showing up on My Taskbar After Upgrading to Mountain Lion

Please help. I have 2nd generation Apple TV and a 2011 Imac but the Airplay Icon will not show up on Taskbar after upgrading to Mountain Lion.

Finally after trying to uninstall/reinstall (no luck!)
I'm on Windows 7 64 bit. iTunes 10.7 And I have a solution:
If found a thread about IPv6.
I followed the same directions on Windows 7 64 bit and it worked.
Disable IPv6 on _all_ of your IP ethernet adapters.
That includes Virtual Machines (VMWare... yes those too), including IPv6 for wireless.
Close iTunes. Start iTunes. Works. Airplay Icon is back.
It looks like All of the AirPlay devices may have to be re-setup. At the very least rebooted.
I found that I had to clompletely erase my DHCP addresses from my (non Apple) router.. and that fixed it. Finally.
Even though this is for the Mac... I believe they are onto something. Original thread link:
http://mactips.dwhoard.com/mactips/other-applications/fix-airplay

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion. They DO work on a lenovo machine but not my imac

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion.
They DO work on a lenovo machine but not my iMac. reset Pram - no luck. took speakers from wife's desktop, they
do not work when jack plugged into my iMac - Sys Prefs "SOUND" only lists "internal speakers/ built in" as available options.
I used my altec lansing speakers on 3 macs including this one for 5-6 years.....now with Mountian Lion I can only get internal speakers???
Ideas? Any/All help would be greatly appreciated - been going nuts with this for 2 days now.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Dashboard widget with streaming video breaks after upgrade to Mountain Lion

Hi. I recently upgraded from Snow Leopard to Mountain Lion. Under SL, I had an OS X widget that was a web clipping of a streaming mpeg image being produced by a Linksys/Cisco WVC54GCA web camera. When I brought up the dashboard, the OS would start streaming the data from the mpeg filename, which looks like "hostname.com/img/video.mjpeg".
After upgrading to Mountain Lion, I noted that the widget never fully loads, indefinitely displaying a "Loading Clip..." mesasge. After deleting and re-adding, I can still get as far as adding the web clipping to the dashboard at the right dimensions, but there's no content.
Unfortunately the camera unit doesn't provide for the display of HTTP access logs, so I can't see if there's an issue there, but my understanding is that if I can display the image in a Safari browser, it should work just fine in Dashboard too. (I did make sure that, where needed, the username/password for accessing the video are included in the URL.)
I did sniff the network traffic between my system and the camera host, and show that video traffic starts flowing between the two as soon as the widget is brought up. So, it's almost like the widget doesn't know when to stop "loading" and start "displaying," perhaps because the HTTP request is never truly "done."
Can anyone speculate if something may have changed in Mountain Lion affecting the ability of web clipping widgets to display streaming video?
Thanks,
Chris

Hi James
I have exactly the same problem with the same "Loading clip" then blank. I have been trying a lot of stuff to get this working, but haven't had the chance of sniffing the network traffic as you have done. By reading what you said about the traffic seems to be flowing without the picure being displayed makes me even more puzzled by this. I never had a streaming video while I were using Snow Leopard, but I had a still-image, as I also do now in Mountain Lion. I recently began to research for a way to display the video.cgi MIME image that my camera produces, and I've also concluded that this should be an easy task for the dashboard web clip function; the video does display in safari after all.
I suspect that our cameras uses the same built in webserver solution written by a "Steven Wu". Cheap webcameras frequently uses his script with MJPEG (stream of JPEG pictures) to avoid the expensive licenses of using other video codecs.
I read this a bit down at this site: http://channel9.msdn.com/coding4fun/articles/Everyone-Loves-Babies-Webcams-and-M otion-Detection
Have you come any closer in your research?
I have started to think that maybe I have to write a dashboard widget on my own to accomplish this.
trelements

HT4798 username/password not working after upgrade to mountain lion

hello, on my imac after upgrading to mountain lion my computer password and/or username seems not to work anymore: when i want to install an update or search for updates on the app store the combination i used so far, does not work anymore. i tried to find out how to reset the computer password but without too much success, and i'm a bit confused, what can i do? thanks a lot

You went wrong at the very beginning by not erasing the hard drive of a used computer before starting to use it yourself. I suggest you do that now.
Back up all data to at least two different storage devices.
Boot into Recovery (command-R at startup), launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume, so you had be better be sure of your backups. Install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

How to correct battery drainage problem after upgrade to mountain lion

My macbook pro battery drains very fast, just used 3% as I am entering this question. This rapid battery drain started after upgrade to mountain lion. Any advice?

This appears to be a problem that's affecting a number of users and has been widely reported. My guess is you're going to have to wait till they do a software update.
There's general tips for conserving battery power on my page here that might ameliorate matters in the meantime:
http://applehelpwriter.wordpress.com/2012/04/23/how-to-make-your-battery-power-l ast-a-bit-longer/
Be sure to report the problem to Apple directly here:
http://www.apple.com/feedback/
- every extra complaint helps to add a little urgency.
(ToU Disclaimer: this link to my site contains other links which promote my services as a technical writer)
Message was edited by: softwater

Mail problems, slow browsing and Facebook problems after upgrading to Mountain Lion

Hi !
I have a 27” iMac from late 2009 which started acting really strange after upgrading to Mountain Lion.
Before that everything works fine but now Mail does not work, will not send replies or add attachments and browsing has become so slow that it usually times out. Another strange problem is Facebook messages which does not work at all (cannot read nor send(.
I have Lenovo laptop connected to the same network so I can benchmark and browsing works just fine on that aswell as FB messages.
Anybody got a solution to this other than using the iMac for offline use only ?

Hi !
I booted both the modem and router but it did not help. Then I tried using the iMac on wireless and now it works so must be something in my D-Link router.
Thanks for pointing me to the right direction !

Server admin is unable to login to server.app after upgrade to Mountain Lion Server?

After upgrade to Mountain Lion Server I am unable to login to the server tools. When I input the admin user name and password the dialog box just shakes indicating the wrong password. But it is the correct password. How do I reset the password or if necessary how do I rest the server and start over on Mountain Lion. I found info on how to reset the server on previous versions of the server which involved executing a plist in the LaunchDaemon folder. However that file does not exist on the server following upgrade to Mountain Lion.
Thanks, Howard

I upgraded today and had the same issue. I took following steps to fix my computer.
Boot into Recovery Partition (Hold Option Button while booting)
Open Terminal.
Type resetpassword
Select your hard drive
Select the user account (Administrator)
Enter a new password for the user
Reenter password
Save
Restart
Boot normally, Login as Adminstrator with the new password and add "Admin" permission to your account.
Restart
Everything should be working as expected

After upgrading to Mountain Lion on my 2011 27" iMac, my Mac occasionally lock-ups.

After upgrading to Mountain Lion on my 2011 27" iMac, my Mac occassionaly locks up while using Safari, Mail or Dreamweaver and I have to d a force-quit, then restart my Mac. Anybody having similar probelms?
I am thinking about doing a clean install of Mountain Lion. Would I be able to restore my applications and data from Time Machine after the re-install?

My 24 inch iMac... 2.8 GHZ dual core (Early 2008) is having the same problem. After it sleeps, I go to use something... and the beachball of death occurs. This happens multiple times a day... and let me tell you... it is annoying... and I am the one who is being annoyed!
It could possibly be revolving around safari... as that is really the only thing that is running consistently. I don't use iTunes on this iMac as I have so many other Macs up and running in the house... and I never consume media on it... so I kind of dismiss iTunes being the culprit.
This is majorly affecting my Mac... in terms of reliability and uptime... which coincedently is the main reason why I switched to Mac in 2008. This is my only Mac that could upgrade to ML... so I don't know how widespread this is... but I hope that this problem can be solved...
I agree with another person who commented on this issue... do we really need a 10.8.1 update already... to fix this?

After upgrading to Mountain Lion, Interface builder starts up with an error every boot.

Similar Messages

Maybe you are looking for